From bcd5dfffe6d7827c5c1df96b2e5168036d522220 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 2 Jul 2015 18:16:09 -0600 Subject: dm: video: Add support for the Parade PS8622/625 bridge This chip provides an eDP to LVDS bridge which is useful for SoCs that don't support LVDS displays (or it would waste scarce pins). The setup is included in the device tree. Signed-off-by: Simon Glass --- doc/device-tree-bindings/video/bridge/ps8622.txt | 33 ++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 doc/device-tree-bindings/video/bridge/ps8622.txt (limited to 'doc/device-tree-bindings') diff --git a/doc/device-tree-bindings/video/bridge/ps8622.txt b/doc/device-tree-bindings/video/bridge/ps8622.txt new file mode 100644 index 0000000000..66d5d07ebb --- /dev/null +++ b/doc/device-tree-bindings/video/bridge/ps8622.txt @@ -0,0 +1,33 @@ +ps8622-bridge bindings + +Required properties: + - compatible: "parade,ps8622" or "parade,ps8625" + - reg: first i2c address of the bridge + - sleep-gpios: OF device-tree gpio specification for PD_ pin. + - reset-gpios: OF device-tree gpio specification for RST_ pin. + - parade,regs: List of 3-byte registers tuples to write: + + +Optional properties: + - lane-count: number of DP lanes to use + - use-external-pwm: backlight will be controlled by an external PWM + - video interfaces: Device node can contain video interface port + nodes for panel according to [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + lvds-bridge@48 { + compatible = "parade,ps8622"; + reg = <0x48>; + sleep-gpios = <&gpc3 6 1 0 0>; + reset-gpios = <&gpc3 1 1 0 0>; + lane-count = <1>; + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; -- cgit v1.2.1