From 024fba5458733a0cb268f3550b16358e104620f7 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 8 Nov 2013 11:18:58 +0000 Subject: malta: add script & instructions to flash U-boot This patch adds a script which may be used with MIPS Navigator Console and a MIPS Nagivator Probe in order to flash U-boot to a MIPS Malta development board. Please see the newly added doc/README.malta for usage instructions. Signed-off-by: Paul Burton --- doc/README.malta | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 doc/README.malta (limited to 'doc/README.malta') diff --git a/doc/README.malta b/doc/README.malta new file mode 100644 index 0000000000..a495d02455 --- /dev/null +++ b/doc/README.malta @@ -0,0 +1,16 @@ +MIPS Malta board + +How to flash using a MIPS Navigator Probe: + + - Ensure that your Malta has jumper JP1 fitted. Without this jumper you will + be unable to flash your Malta using a Navigator Probe. + + - Connect Navigator Console to your probe and Malta as usual. + + - Within Navigator Console run the following commands: + + source /path/to/u-boot/board/malta/flash-malta-boot.tcl + reset + flash-boot /path/to/u-boot/u-boot.bin + + - You should now be able to reboot your Malta to a U-boot shell. -- cgit v1.2.1