From cc1c8a136f9813d0a9cb9a94d2f12206873ddc4e Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 2 Nov 2002 22:58:18 +0000 Subject: Initial revision --- doc/README.OXC | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 doc/README.OXC (limited to 'doc/README.OXC') diff --git a/doc/README.OXC b/doc/README.OXC new file mode 100644 index 0000000000..e7bb76f399 --- /dev/null +++ b/doc/README.OXC @@ -0,0 +1,25 @@ +This document contains different information about the port +of U-Boot for the OXC board designed by Lucent Technologies, +Inc. + +1. Showing activity + +U-Boot for the OXC board can show its current status using +the Active LED. This feature is configured by the following +options: + +CONFIG_SHOW_ACTIVITY + + When this option is on, the Active LED is blinking fast +when U-Boot runs in the idle loop (i.e. waits for user +commands from serial console) and blinking slow when it +downloads an image over network. When U-Boot loads an image +over serial line the Active LED does not blink and its state +is random (i.e. either constant on or constant off). + +CONFIG_SHOW_BOOT_PROGRESS + + When this option is on, U-Boot switches the Active LED +off before booting an image and switches it on if booting +failed due to some reasons. + -- cgit v1.2.1