From 02778f2f1b4b1a28b492367477db27c58d45ae35 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 24 Apr 2009 23:39:41 -0400 Subject: Blackfin: fix booting with older bootroms (no EVT1) When dropping jump block support, the assumption was that all bootroms supported entry point redirection via the EVT1 register. Unfortunately, this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2 and older and BF561). No one really noticed earlier because these parts usually are booted by bypassing the bootrom entirely, and older BF533 parts are not supported at all (too many anomalies). Signed-off-by: Mike Frysinger --- cpu/blackfin/cpu.c | 10 +++++++++- cpu/blackfin/initcode.c | 2 ++ 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'cpu') diff --git a/cpu/blackfin/cpu.c b/cpu/blackfin/cpu.c index c2ff8cd8c6..9bb6407fc6 100644 --- a/cpu/blackfin/cpu.c +++ b/cpu/blackfin/cpu.c @@ -25,12 +25,20 @@ ulong bfin_poweron_retx; __attribute__ ((__noreturn__)) void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) { + extern char _stext_l1; +#ifndef CONFIG_BFIN_BOOTROM_USES_EVT1 + /* Build a NOP slide over the LDR jump block. Whee! */ + char nops[0xC]; + serial_early_puts("NOP Slide\n"); + memset(nops, 0x00, sizeof(nops)); + memcpy(&_stext_l1 - sizeof(nops), nops, sizeof(nops)); +#endif + if (!loaded_from_ldr) { /* Relocate sections into L1 if the LDR didn't do it -- don't * check length because the linker script does the size * checking at build time. */ - extern char _stext_l1; serial_early_puts("L1 Relocate\n"); extern char _stext_l1, _etext_l1, _stext_l1_lma; memcpy(&_stext_l1, &_stext_l1_lma, (&_etext_l1 - &_stext_l1)); diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c index c0fe2c65a6..a039cbbbce 100644 --- a/cpu/blackfin/initcode.c +++ b/cpu/blackfin/initcode.c @@ -543,9 +543,11 @@ void initcode(ADI_BOOT_DATA *bootstruct) serial_putc('T'); +#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1 /* tell the bootrom where our entry point is */ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE); +#endif serial_putc('>'); serial_putc('\n'); -- cgit v1.2.1