From 8d1f268204b07e172f3cb5cee0a3974d605b0b98 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Mon, 12 Apr 2010 22:28:09 -0500 Subject: ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU Signed-off-by: Peter Tyser --- cpu/mpc8xx/fec.c | 1026 ------------------------------------------------------ 1 file changed, 1026 deletions(-) delete mode 100644 cpu/mpc8xx/fec.c (limited to 'cpu/mpc8xx/fec.c') diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c deleted file mode 100644 index 89c1ff939d..0000000000 --- a/cpu/mpc8xx/fec.c +++ /dev/null @@ -1,1026 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#undef ET_DEBUG - -#if defined(CONFIG_CMD_NET) && \ - (defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2)) - -/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */ -#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2) -#define CONFIG_ETHER_ON_FEC1 1 -#endif - -/* define WANT_MII when MII support is required */ -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY) -#define WANT_MII -#else -#undef WANT_MII -#endif - -#if defined(WANT_MII) -#include - -#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) -#error "CONFIG_MII has to be defined!" -#endif - -#endif - -#if defined(CONFIG_RMII) && !defined(WANT_MII) -#error RMII support is unusable without a working PHY. -#endif - -#ifdef CONFIG_SYS_DISCOVER_PHY -static int mii_discover_phy(struct eth_device *dev); -#endif - -int fec8xx_miiphy_read(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value); -int fec8xx_miiphy_write(char *devname, unsigned char addr, - unsigned char reg, unsigned short value); - -static struct ether_fcc_info_s -{ - int ether_index; - int fecp_offset; - int phy_addr; - int actual_phy_addr; - int initialized; -} - ether_fcc_info[] = { -#if defined(CONFIG_ETHER_ON_FEC1) - { - 0, - offsetof(immap_t, im_cpm.cp_fec1), -#if defined(CONFIG_FEC1_PHY) - CONFIG_FEC1_PHY, -#else - -1, /* discover */ -#endif - -1, - 0, - - }, -#endif -#if defined(CONFIG_ETHER_ON_FEC2) - { - 1, - offsetof(immap_t, im_cpm.cp_fec2), -#if defined(CONFIG_FEC2_PHY) - CONFIG_FEC2_PHY, -#else - -1, -#endif - -1, - 0, - }, -#endif -}; - -/* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 - -#define TX_BUF_CNT 2 - -#define TOUT_LOOP 100 - -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 -#define PKT_MAXBLR_SIZE 1520 - -#ifdef __GNUC__ -static char txbuf[DBUF_LENGTH] __attribute__ ((aligned(8))); -#else -#error txbuf must be aligned. -#endif - -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -/* - * FEC Ethernet Tx and Rx buffer descriptors allocated at the - * immr->udata_bd address on Dual-Port RAM - * Provide for Double Buffering - */ - -typedef volatile struct CommonBufferDescriptor { - cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ - cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ -} RTXBD; - -static RTXBD *rtx = NULL; - -static int fec_send(struct eth_device* dev, volatile void *packet, int length); -static int fec_recv(struct eth_device* dev); -static int fec_init(struct eth_device* dev, bd_t * bd); -static void fec_halt(struct eth_device* dev); -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) -static void __mii_init(void); -#endif - -int fec_initialize(bd_t *bis) -{ - struct eth_device* dev; - struct ether_fcc_info_s *efis; - int i; - - for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) { - - dev = malloc(sizeof(*dev)); - if (dev == NULL) - hang(); - - memset(dev, 0, sizeof(*dev)); - - /* for FEC1 make sure that the name of the interface is the same - as the old one for compatibility reasons */ - if (i == 0) { - sprintf (dev->name, "FEC ETHERNET"); - } else { - sprintf (dev->name, "FEC%d ETHERNET", - ether_fcc_info[i].ether_index + 1); - } - - efis = ðer_fcc_info[i]; - - /* - * reset actual phy addr - */ - efis->actual_phy_addr = -1; - - dev->priv = efis; - dev->init = fec_init; - dev->halt = fec_halt; - dev->send = fec_send; - dev->recv = fec_recv; - - eth_register(dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - miiphy_register(dev->name, - fec8xx_miiphy_read, fec8xx_miiphy_write); -#endif - } - return 1; -} - -static int fec_send(struct eth_device* dev, volatile void *packet, int length) -{ - int j, rc; - struct ether_fcc_info_s *efis = dev->priv; - volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); - - /* section 16.9.23.3 - * Wait for ready - */ - j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j=TOUT_LOOP) { - printf("TX not ready\n"); - } - - rtx->txbd[txIdx].cbd_bufaddr = (uint)packet; - rtx->txbd[txIdx].cbd_datlen = length; - rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST; - __asm__ ("eieio"); - - /* Activate transmit Buffer Descriptor polling */ - fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */ - - j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j=TOUT_LOOP) { - printf("TX timeout\n"); - } -#ifdef ET_DEBUG - printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", - __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc, - (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2); -#endif - /* return only status bits */; - rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS); - - txIdx = (txIdx + 1) % TX_BUF_CNT; - - return rc; -} - -static int fec_recv (struct eth_device *dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - volatile fec_t *fecp = - (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset); - int length; - - for (;;) { - /* section 16.9.23.2 */ - if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } - - length = rtx->rxbd[rxIdx].cbd_datlen; - - if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) { -#ifdef ET_DEBUG - printf ("%s[%d] err: %x\n", - __FUNCTION__, __LINE__, - rtx->rxbd[rxIdx].cbd_sc); -#endif - } else { - volatile uchar *rx = NetRxPackets[rxIdx]; - - length -= 4; - -#if defined(CONFIG_CMD_CDP) - if ((rx[0] & 1) != 0 - && memcmp ((uchar *) rx, NetBcastAddr, 6) != 0 - && memcmp ((uchar *) rx, NetCDPAddr, 6) != 0) - rx = NULL; -#endif - /* - * Pass the packet up to the protocol layers. - */ - if (rx != NULL) - NetReceive (rx, length); - } - - /* Give the buffer back to the FEC. */ - rtx->rxbd[rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if ((rxIdx + 1) >= PKTBUFSRX) { - rtx->rxbd[PKTBUFSRX - 1].cbd_sc = - (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); - rxIdx = 0; - } else { - rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - rxIdx++; - } - - __asm__ ("eieio"); - - /* Try to fill Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - } - - return length; -} - -/************************************************************** - * - * FEC Ethernet Initialization Routine - * - *************************************************************/ - -#define FEC_ECNTRL_PINMUX 0x00000004 -#define FEC_ECNTRL_ETHER_EN 0x00000002 -#define FEC_ECNTRL_RESET 0x00000001 - -#define FEC_RCNTRL_BC_REJ 0x00000010 -#define FEC_RCNTRL_PROM 0x00000008 -#define FEC_RCNTRL_MII_MODE 0x00000004 -#define FEC_RCNTRL_DRT 0x00000002 -#define FEC_RCNTRL_LOOP 0x00000001 - -#define FEC_TCNTRL_FDEN 0x00000004 -#define FEC_TCNTRL_HBC 0x00000002 -#define FEC_TCNTRL_GTS 0x00000001 - -#define FEC_RESET_DELAY 50 - -#if defined(CONFIG_RMII) - -static inline void fec_10Mbps(struct eth_device *dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - int fecidx = efis->ether_index; - uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008; - - if ((unsigned int)fecidx >= 2) - hang(); - - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr |= mask; -} - -static inline void fec_100Mbps(struct eth_device *dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - int fecidx = efis->ether_index; - uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008; - - if ((unsigned int)fecidx >= 2) - hang(); - - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr &= ~mask; -} - -#endif - -static inline void fec_full_duplex(struct eth_device *dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); - - fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT; - fecp->fec_x_cntrl |= FEC_TCNTRL_FDEN; /* FD enable */ -} - -static inline void fec_half_duplex(struct eth_device *dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); - - fecp->fec_r_cntrl |= FEC_RCNTRL_DRT; - fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN; /* FD disable */ -} - -static void fec_pin_init(int fecidx) -{ - bd_t *bd = gd->bd; - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile fec_t *fecp; - - /* - * only two FECs please - */ - if ((unsigned int)fecidx >= 2) - hang(); - - if (fecidx == 0) - fecp = &immr->im_cpm.cp_fec1; - else - fecp = &immr->im_cpm.cp_fec2; - - /* - * Set MII speed to 2.5 MHz or slightly below. - * * According to the MPC860T (Rev. D) Fast ethernet controller user - * * manual (6.2.14), - * * the MII management interface clock must be less than or equal - * * to 2.5 MHz. - * * This MDC frequency is equal to system clock / (2 * MII_SPEED). - * * Then MII_SPEED = system_clock / 2 * 2,5 MHz. - * - * All MII configuration is done via FEC1 registers: - */ - immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1; - -#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2) - /* our PHYs are the limit at 2.5 MHz */ - fecp->fec_mii_speed <<= 1; -#endif - -#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII) - /* use MDC for MII */ - immr->im_ioport.iop_pdpar |= 0x0080; - immr->im_ioport.iop_pddir &= ~0x0080; -#endif - - if (fecidx == 0) { -#if defined(CONFIG_ETHER_ON_FEC1) - -#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */ - -#if !defined(CONFIG_RMII) - - immr->im_ioport.iop_papar |= 0xf830; - immr->im_ioport.iop_padir |= 0x0830; - immr->im_ioport.iop_padir &= ~0xf000; - - immr->im_cpm.cp_pbpar |= 0x00001001; - immr->im_cpm.cp_pbdir &= ~0x00001001; - - immr->im_ioport.iop_pcpar |= 0x000c; - immr->im_ioport.iop_pcdir &= ~0x000c; - - immr->im_cpm.cp_pepar |= 0x00000003; - immr->im_cpm.cp_pedir |= 0x00000003; - immr->im_cpm.cp_peso &= ~0x00000003; - - immr->im_cpm.cp_cptr &= ~0x00000100; - -#else - -#if !defined(CONFIG_FEC1_PHY_NORXERR) - immr->im_ioport.iop_papar |= 0x1000; - immr->im_ioport.iop_padir &= ~0x1000; -#endif - immr->im_ioport.iop_papar |= 0xe810; - immr->im_ioport.iop_padir |= 0x0810; - immr->im_ioport.iop_padir &= ~0xe000; - - immr->im_cpm.cp_pbpar |= 0x00000001; - immr->im_cpm.cp_pbdir &= ~0x00000001; - - immr->im_cpm.cp_cptr |= 0x00000100; - immr->im_cpm.cp_cptr &= ~0x00000050; - -#endif /* !CONFIG_RMII */ - -#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210) - /* - * Configure all of port D for MII. - */ - immr->im_ioport.iop_pdpar = 0x1fff; - - /* - * Bits moved from Rev. D onward - */ - if ((get_immr(0) & 0xffff) < 0x0501) - immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */ - else - immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */ -#else - /* - * Configure port A for MII. - */ - -#if defined(CONFIG_ICU862) && defined(CONFIG_SYS_DISCOVER_PHY) - - /* - * On the ICU862 board the MII-MDC pin is routed to PD8 pin - * * of CPU, so for this board we need to configure Utopia and - * * enable PD8 to MII-MDC function - */ - immr->im_ioport.iop_pdpar |= 0x4080; -#endif - - /* - * Has Utopia been configured? - */ - if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) { - /* - * YES - Use MUXED mode for UTOPIA bus. - * This frees Port A for use by MII (see 862UM table 41-6). - */ - immr->im_ioport.utmode &= ~0x80; - } else { - /* - * NO - set SPLIT mode for UTOPIA bus. - * - * This doesn't really effect UTOPIA (which isn't - * enabled anyway) but just tells the 862 - * to use port A for MII (see 862UM table 41-6). - */ - immr->im_ioport.utmode |= 0x80; - } -#endif /* !defined(CONFIG_ICU862) */ - -#endif /* CONFIG_ETHER_ON_FEC1 */ - } else if (fecidx == 1) { - -#if defined(CONFIG_ETHER_ON_FEC2) - -#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */ - -#if !defined(CONFIG_RMII) - immr->im_cpm.cp_pepar |= 0x0003fffc; - immr->im_cpm.cp_pedir |= 0x0003fffc; - immr->im_cpm.cp_peso &= ~0x000087fc; - immr->im_cpm.cp_peso |= 0x00037800; - - immr->im_cpm.cp_cptr &= ~0x00000080; -#else - -#if !defined(CONFIG_FEC2_PHY_NORXERR) - immr->im_cpm.cp_pepar |= 0x00000010; - immr->im_cpm.cp_pedir |= 0x00000010; - immr->im_cpm.cp_peso &= ~0x00000010; -#endif - immr->im_cpm.cp_pepar |= 0x00039620; - immr->im_cpm.cp_pedir |= 0x00039620; - immr->im_cpm.cp_peso |= 0x00031000; - immr->im_cpm.cp_peso &= ~0x00008620; - - immr->im_cpm.cp_cptr |= 0x00000080; - immr->im_cpm.cp_cptr &= ~0x00000028; -#endif /* CONFIG_RMII */ - -#endif /* CONFIG_MPC885_FAMILY */ - -#endif /* CONFIG_ETHER_ON_FEC2 */ - - } -} - -static int fec_reset(volatile fec_t *fecp) -{ - int i; - - /* Whack a reset. - * A delay is required between a reset of the FEC block and - * initialization of other FEC registers because the reset takes - * some time to complete. If you don't delay, subsequent writes - * to FEC registers might get killed by the reset routine which is - * still in progress. - */ - - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay (1); - } - if (i == FEC_RESET_DELAY) - return -1; - - return 0; -} - -static int fec_init (struct eth_device *dev, bd_t * bd) -{ - struct ether_fcc_info_s *efis = dev->priv; - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile fec_t *fecp = - (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset); - int i; - - if (efis->ether_index == 0) { -#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */ -#if defined(CONFIG_MPC885ADS) - *(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST); -#else - /* configure FADS for fast (FEC) ethernet, half-duplex */ - /* The LXT970 needs about 50ms to recover from reset, so - * wait for it by discovering the PHY before leaving eth_init(). - */ - { - volatile uint *bcsr4 = (volatile uint *) BCSR4; - - *bcsr4 = (*bcsr4 & ~(BCSR4_FETH_EN | BCSR4_FETHCFG1)) - | (BCSR4_FETHCFG0 | BCSR4_FETHFDE | - BCSR4_FETHRST); - - /* reset the LXT970 PHY */ - *bcsr4 &= ~BCSR4_FETHRST; - udelay (10); - *bcsr4 |= BCSR4_FETHRST; - udelay (10); - } -#endif /* CONFIG_MPC885ADS */ -#endif /* CONFIG_FADS */ - } - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - /* the MII interface is connected to FEC1 - * so for the miiphy_xxx function to work we must - * call mii_init since fec_halt messes the thing up - */ - if (efis->ether_index != 0) - __mii_init(); -#endif - - if (fec_reset(fecp) < 0) - printf ("FEC_RESET_DELAY timeout\n"); - - /* We use strictly polling mode only - */ - fecp->fec_imask = 0; - - /* Clear any pending interrupt - */ - fecp->fec_ievent = 0xffc0; - - /* No need to set the IVEC register */ - - /* Set station address - */ -#define ea dev->enetaddr - fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); - fecp->fec_addr_high = (ea[4] << 8) | (ea[5]); -#undef ea - -#if defined(CONFIG_CMD_CDP) - /* - * Turn on multicast address hash table - */ - fecp->fec_hash_table_high = 0xffffffff; - fecp->fec_hash_table_low = 0xffffffff; -#else - /* Clear multicast address hash table - */ - fecp->fec_hash_table_high = 0; - fecp->fec_hash_table_low = 0; -#endif - - /* Set maximum receive buffer size. - */ - fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; - - /* Set maximum frame length - */ - fecp->fec_r_hash = PKT_MAXBUF_SIZE; - - /* - * Setup Buffers and Buffer Desriptors - */ - rxIdx = 0; - txIdx = 0; - - if (!rtx) { -#ifdef CONFIG_SYS_ALLOC_DPRAM - rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + - dpram_alloc_align (sizeof (RTXBD), 8)); -#else - rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_FEC_BASE); -#endif - } - /* - * Setup Receiver Buffer Descriptors (13.14.24.18) - * Settings: - * Empty, Wrap - */ - for (i = 0; i < PKTBUFSRX; i++) { - rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - rtx->rxbd[i].cbd_datlen = 0; /* Reset */ - rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i]; - } - rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* - * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) - * Settings: - * Last, Tx CRC - */ - for (i = 0; i < TX_BUF_CNT; i++) { - rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; - rtx->txbd[i].cbd_datlen = 0; /* Reset */ - rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]); - } - rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; - - /* Set receive and transmit descriptor base - */ - fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]); - fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]); - - /* Enable MII mode - */ -#if 0 /* Full duplex mode */ - fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; - fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; -#else /* Half duplex mode */ - fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT; - fecp->fec_x_cntrl = 0; -#endif - - /* Enable big endian and don't care about SDMA FC. - */ - fecp->fec_fun_code = 0x78000000; - - /* - * Setup the pin configuration of the FEC - */ - fec_pin_init (efis->ether_index); - - rxIdx = 0; - txIdx = 0; - - /* - * Now enable the transmit and receive processing - */ - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN; - - if (efis->phy_addr == -1) { -#ifdef CONFIG_SYS_DISCOVER_PHY - /* - * wait for the PHY to wake up after reset - */ - efis->actual_phy_addr = mii_discover_phy (dev); - - if (efis->actual_phy_addr == -1) { - printf ("Unable to discover phy!\n"); - return -1; - } -#else - efis->actual_phy_addr = -1; -#endif - } else { - efis->actual_phy_addr = efis->phy_addr; - } - -#if defined(CONFIG_MII) && defined(CONFIG_RMII) - /* - * adapt the RMII speed to the speed of the phy - */ - if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) { - fec_100Mbps (dev); - } else { - fec_10Mbps (dev); - } -#endif - -#if defined(CONFIG_MII) - /* - * adapt to the half/full speed settings - */ - if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) { - fec_full_duplex (dev); - } else { - fec_half_duplex (dev); - } -#endif - - /* And last, try to fill Rx Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - - efis->initialized = 1; - - return 0; -} - - -static void fec_halt(struct eth_device* dev) -{ - struct ether_fcc_info_s *efis = dev->priv; - volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset); - int i; - - /* avoid halt if initialized; mii gets stuck otherwise */ - if (!efis->initialized) - return; - - /* Whack a reset. - * A delay is required between a reset of the FEC block and - * initialization of other FEC registers because the reset takes - * some time to complete. If you don't delay, subsequent writes - * to FEC registers might get killed by the reset routine which is - * still in progress. - */ - - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay (1); - } - if (i == FEC_RESET_DELAY) { - printf ("FEC_RESET_DELAY timeout\n"); - return; - } - - efis->initialized = 0; -} - -#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - -/* Make MII read/write commands for the FEC. -*/ - -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18) | \ - (VAL & 0xffff)) - -/* Interrupt events/masks. -*/ -#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ -#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ -#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ -#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ -#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ -#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ -#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ -#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ -#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ -#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ - -/* PHY identification - */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ -#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */ -#define PHY_ID_KSM8995M 0x00221450 /* MICREL KS8995MA */ - -/* send command to phy using mii, wait for result */ -static uint -mii_send(uint mii_cmd) -{ - uint mii_reply; - volatile fec_t *ep; - int cnt; - - ep = &(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_fec); - - ep->fec_mii_data = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - cnt = 0; - while (!(ep->fec_ievent & FEC_ENET_MII)) { - if (++cnt > 1000) { - printf("mii_send STUCK!\n"); - break; - } - } - mii_reply = ep->fec_mii_data; /* result from phy */ - ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */ -#if 0 - printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply); -#endif - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif - -#if defined(CONFIG_SYS_DISCOVER_PHY) -static int mii_discover_phy(struct eth_device *dev) -{ -#define MAX_PHY_PASSES 11 - uint phyno; - int pass; - uint phytype; - int phyaddr; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay(10000); /* wait 10ms */ - } - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { - phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR2)); -#ifdef ET_DEBUG - printf("PHY type 0x%x pass %d type ", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype |= mii_send(mk_mii_read(phyno, - PHY_PHYIDR1)) << 16; - -#ifdef ET_DEBUG - printf("PHY @ 0x%x pass %d type ",phyno,pass); - switch (phytype & 0xfffffff0) { - case PHY_ID_LXT970: - printf("LXT970\n"); - break; - case PHY_ID_LXT971: - printf("LXT971\n"); - break; - case PHY_ID_82555: - printf("82555\n"); - break; - case PHY_ID_QS6612: - printf("QS6612\n"); - break; - case PHY_ID_AMD79C784: - printf("AMD79C784\n"); - break; - case PHY_ID_LSI80225B: - printf("LSI L80225/B\n"); - break; - case PHY_ID_DM9161: - printf("Davicom DM9161\n"); - break; - case PHY_ID_KSM8995M: - printf("MICREL KS8995M\n"); - break; - default: - printf("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) { - printf("No PHY device found.\n"); - } - return phyaddr; -} -#endif /* CONFIG_SYS_DISCOVER_PHY */ - -#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII) - -/**************************************************************************** - * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -static void __mii_init(void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile fec_t *fecp = &(immr->im_cpm.cp_fec); - - if (fec_reset(fecp) < 0) - printf ("FEC_RESET_DELAY timeout\n"); - - /* We use strictly polling mode only - */ - fecp->fec_imask = 0; - - /* Clear any pending interrupt - */ - fecp->fec_ievent = 0xffc0; - - /* Now enable the transmit and receive processing - */ - fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN; -} - -void mii_init (void) -{ - int i; - - __mii_init(); - - /* Setup the pin configuration of the FEC(s) - */ - for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) - fec_pin_init(ether_fcc_info[i].ether_index); -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int fec8xx_miiphy_read(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_read(addr, reg)); - - *value = rdreg; -#ifdef MII_DEBUG - printf ("0x%04x\n", *value); -#endif - return 0; -} - -int fec8xx_miiphy_write(char *devname, unsigned char addr, - unsigned char reg, unsigned short value) -{ - short rdreg; /* register working value */ -#ifdef MII_DEBUG - printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send(mk_mii_write(addr, reg, value)); - -#ifdef MII_DEBUG - printf ("0x%04x\n", value); -#endif - return 0; -} -#endif - -#endif -- cgit v1.2.1