From 008861a2f3ef2c062744d733787c7e530a1b8761 Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Mon, 7 May 2007 22:36:15 +0200 Subject: [MPC5xxx] There are networking problems on the Motion-PRO board with current PHY initalization code (tftp timeouts all the time). This commit temporarily disables PHY initalization sequence to make the networking operational, until a fix is found. --- cpu/mpc5xxx/fec.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'cpu/mpc5xxx/fec.c') diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index e6392340a9..0b8f24d18a 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -395,7 +395,9 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) { mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; +#ifndef CONFIG_MOTIONPRO const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ +#endif /* !CONFIG_MOTIONPRO */ #if (DEBUG & 0x1) printf ("mpc5xxx_fec_init_phy... Begin\n"); @@ -428,6 +430,14 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) */ fec->eth->imask = 0x00000000; +/* + * In original Promess-provided code PHY initialization is disabled with the + * following comment: "Phy initialization is DISABLED for now. There was a + * problem with running 100 Mbps on PRO board". Thus we temporarily disable + * PHY initialization for the Motion-PRO board, until a proper fix is found. + */ + +#ifndef CONFIG_MOTIONPRO if (fec->xcv_type != SEVENWIRE) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock @@ -550,6 +560,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) } } +#endif /* !CONFIG_MOTIONPRO */ #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) -- cgit v1.2.1