From 8bde7f776c77b343aca29b8c7b58464d915ac245 Mon Sep 17 00:00:00 2001 From: wdenk Date: Fri, 27 Jun 2003 21:31:46 +0000 Subject: * Code cleanup: - remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen) --- common/dlmalloc.c | 563 ++++++++++++++++++++++++++---------------------------- 1 file changed, 274 insertions(+), 289 deletions(-) (limited to 'common/dlmalloc.c') diff --git a/common/dlmalloc.c b/common/dlmalloc.c index 9261507571..0c0487228e 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -9,8 +9,8 @@ * VERSION 2.6.6 Sun Mar 5 19:10:03 2000 Doug Lea (dl at gee) Note: There may be an updated version of this malloc obtainable at - ftp://g.oswego.edu/pub/misc/malloc.c - Check before installing! + ftp://g.oswego.edu/pub/misc/malloc.c + Check before installing! * Why use this malloc? @@ -87,7 +87,7 @@ and status information. Minimum allocated size: 4-byte ptrs: 16 bytes (including 4 overhead) - 8-byte ptrs: 24/32 bytes (including, 4/8 overhead) + 8-byte ptrs: 24/32 bytes (including, 4/8 overhead) When a chunk is freed, 12 (for 4byte ptrs) or 20 (for 8 byte ptrs but 4 byte size) or 24 (for 8/8) additional bytes are @@ -99,7 +99,7 @@ pointer to something of the minimum allocatable size. Maximum allocated size: 4-byte size_t: 2^31 - 8 bytes - 8-byte size_t: 2^63 - 16 bytes + 8-byte size_t: 2^63 - 16 bytes It is assumed that (possibly signed) size_t bit values suffice to represent chunk sizes. `Possibly signed' is due to the fact @@ -115,11 +115,11 @@ make the normal worst-case wastage 15 bytes (i.e., up to 15 more bytes will be allocated than were requested in malloc), with two exceptions: - 1. Because requests for zero bytes allocate non-zero space, - the worst case wastage for a request of zero bytes is 24 bytes. - 2. For requests >= mmap_threshold that are serviced via - mmap(), the worst case wastage is 8 bytes plus the remainder - from a system page (the minimal mmap unit); typically 4096 bytes. + 1. Because requests for zero bytes allocate non-zero space, + the worst case wastage for a request of zero bytes is 24 bytes. + 2. For requests >= mmap_threshold that are serviced via + mmap(), the worst case wastage is 8 bytes plus the remainder + from a system page (the minimal mmap unit); typically 4096 bytes. * Limitations @@ -372,8 +372,8 @@ void* memset(void*, int, size_t); void* memcpy(void*, const void*, size_t); #else #ifdef WIN32 -// On Win32 platforms, 'memset()' and 'memcpy()' are already declared in -// 'windows.h' +/* On Win32 platforms, 'memset()' and 'memcpy()' are already declared in */ +/* 'windows.h' */ #else Void_t* memset(); Void_t* memcpy(); @@ -393,14 +393,14 @@ do { \ if(mzsz <= 9*sizeof(mzsz)) { \ INTERNAL_SIZE_T* mz = (INTERNAL_SIZE_T*) (charp); \ if(mzsz >= 5*sizeof(mzsz)) { *mz++ = 0; \ - *mz++ = 0; \ + *mz++ = 0; \ if(mzsz >= 7*sizeof(mzsz)) { *mz++ = 0; \ - *mz++ = 0; \ - if(mzsz >= 9*sizeof(mzsz)) { *mz++ = 0; \ - *mz++ = 0; }}} \ - *mz++ = 0; \ - *mz++ = 0; \ - *mz = 0; \ + *mz++ = 0; \ + if(mzsz >= 9*sizeof(mzsz)) { *mz++ = 0; \ + *mz++ = 0; }}} \ + *mz++ = 0; \ + *mz++ = 0; \ + *mz = 0; \ } else memset((charp), 0, mzsz); \ } while(0) @@ -411,14 +411,14 @@ do { \ INTERNAL_SIZE_T* mcsrc = (INTERNAL_SIZE_T*) (src); \ INTERNAL_SIZE_T* mcdst = (INTERNAL_SIZE_T*) (dest); \ if(mcsz >= 5*sizeof(mcsz)) { *mcdst++ = *mcsrc++; \ - *mcdst++ = *mcsrc++; \ + *mcdst++ = *mcsrc++; \ if(mcsz >= 7*sizeof(mcsz)) { *mcdst++ = *mcsrc++; \ - *mcdst++ = *mcsrc++; \ - if(mcsz >= 9*sizeof(mcsz)) { *mcdst++ = *mcsrc++; \ - *mcdst++ = *mcsrc++; }}} \ - *mcdst++ = *mcsrc++; \ - *mcdst++ = *mcsrc++; \ - *mcdst = *mcsrc ; \ + *mcdst++ = *mcsrc++; \ + if(mcsz >= 9*sizeof(mcsz)) { *mcdst++ = *mcsrc++; \ + *mcdst++ = *mcsrc++; }}} \ + *mcdst++ = *mcsrc++; \ + *mcdst++ = *mcsrc++; \ + *mcdst = *mcsrc ; \ } else memcpy(dest, src, mcsz); \ } while(0) @@ -558,7 +558,6 @@ do { \ #endif - /* This version of malloc supports the standard SVID/XPG mallinfo @@ -622,7 +621,6 @@ struct mallinfo { #define M_MMAP_MAX -4 - #ifndef DEFAULT_TRIM_THRESHOLD #define DEFAULT_TRIM_THRESHOLD (128 * 1024) #endif @@ -686,11 +684,11 @@ struct mallinfo { retain whenever sbrk is called. It is used in two ways internally: * When sbrk is called to extend the top of the arena to satisfy - a new malloc request, this much padding is added to the sbrk - request. + a new malloc request, this much padding is added to the sbrk + request. * When malloc_trim is called automatically from free(), - it is used as the `pad' argument. + it is used as the `pad' argument. In both cases, the actual amount of padding is rounded so that the end of the arena is always a system page boundary. @@ -736,15 +734,15 @@ struct mallinfo { However, it has the disadvantages that: - 1. The space cannot be reclaimed, consolidated, and then - used to service later requests, as happens with normal chunks. - 2. It can lead to more wastage because of mmap page alignment - requirements - 3. It causes malloc performance to be more dependent on host - system memory management support routines which may vary in - implementation quality and may impose arbitrary - limitations. Generally, servicing a request via normal - malloc steps is faster than going through a system's mmap. + 1. The space cannot be reclaimed, consolidated, and then + used to service later requests, as happens with normal chunks. + 2. It can lead to more wastage because of mmap page alignment + requirements + 3. It causes malloc performance to be more dependent on host + system memory management support routines which may vary in + implementation quality and may impose arbitrary + limitations. Generally, servicing a request via normal + malloc steps is faster than going through a system's mmap. All together, these considerations should lead you to use mmap only for relatively large requests. @@ -753,7 +751,6 @@ struct mallinfo { */ - #ifndef DEFAULT_MMAP_MAX #if HAVE_MMAP #define DEFAULT_MMAP_MAX (64) @@ -766,15 +763,15 @@ struct mallinfo { M_MMAP_MAX is the maximum number of requests to simultaneously service using mmap. This parameter exists because: - 1. Some systems have a limited number of internal tables for - use by mmap. - 2. In most systems, overreliance on mmap can degrade overall - performance. - 3. If a program allocates many large regions, it is probably - better off using normal sbrk-based allocation routines that - can reclaim and reallocate normal heap memory. Using a - small value allows transition into this mode after the - first few allocations. + 1. Some systems have a limited number of internal tables for + use by mmap. + 2. In most systems, overreliance on mmap can degrade overall + performance. + 3. If a program allocates many large regions, it is probably + better off using normal sbrk-based allocation routines that + can reclaim and reallocate normal heap memory. Using a + small value allows transition into this mode after the + first few allocations. Setting to 0 disables all use of mmap. If HAVE_MMAP is not set, the default value is 0, and attempts to set it to non-zero values @@ -782,8 +779,6 @@ struct mallinfo { */ - - /* USE_DL_PREFIX will prefix all public routines with the string 'dl'. Useful to quickly avoid procedure declaration conflicts and linker @@ -794,8 +789,6 @@ struct mallinfo { /* #define USE_DL_PREFIX */ - - /* Special defines for linux libc @@ -1013,7 +1006,7 @@ void gcleanup () rval = VirtualFree ((void*)gAddressBase, gNextAddress - gAddressBase, MEM_DECOMMIT); - assert (rval); + assert (rval); } while (head) { @@ -1038,24 +1031,24 @@ void* findRegion (void* start_address, unsigned long size) return start_address; else { - // Requested region is not available so see if the - // next region is available. Set 'start_address' - // to the next region and call 'VirtualQuery()' - // again. + /* Requested region is not available so see if the */ + /* next region is available. Set 'start_address' */ + /* to the next region and call 'VirtualQuery()' */ + /* again. */ start_address = (char*)info.BaseAddress + info.RegionSize; - // Make sure we start looking for the next region - // on the *next* 64K boundary. Otherwise, even if - // the new region is free according to - // 'VirtualQuery()', the subsequent call to - // 'VirtualAlloc()' (which follows the call to - // this routine in 'wsbrk()') will round *down* - // the requested address to a 64K boundary which - // we already know is an address in the - // unavailable region. Thus, the subsequent call - // to 'VirtualAlloc()' will fail and bring us back - // here, causing us to go into an infinite loop. + /* Make sure we start looking for the next region */ + /* on the *next* 64K boundary. Otherwise, even if */ + /* the new region is free according to */ + /* 'VirtualQuery()', the subsequent call to */ + /* 'VirtualAlloc()' (which follows the call to */ + /* this routine in 'wsbrk()') will round *down* */ + /* the requested address to a 64K boundary which */ + /* we already know is an address in the */ + /* unavailable region. Thus, the subsequent call */ + /* to 'VirtualAlloc()' will fail and bring us back */ + /* here, causing us to go into an infinite loop. */ start_address = (void *) AlignPage64K((unsigned long) start_address); @@ -1092,9 +1085,9 @@ gAllocatedSize)) gAddressBase = gNextAddress = (unsigned int)VirtualAlloc (new_address, new_size, MEM_RESERVE, PAGE_NOACCESS); - // repeat in case of race condition - // The region that we found has been snagged - // by another thread + /* repeat in case of race condition */ + /* The region that we found has been snagged */ + /* by another thread */ } while (gAddressBase == 0); @@ -1182,17 +1175,17 @@ typedef struct malloc_chunk* mchunkptr; chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | Size of previous chunk, if allocated | | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | Size of chunk, in bytes |P| + | Size of previous chunk, if allocated | | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Size of chunk, in bytes |P| mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | User data starts here... . - . . - . (malloc_usable_space() bytes) . - . | + | User data starts here... . + . . + . (malloc_usable_space() bytes) . + . | nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | Size of chunk | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Size of chunk | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Where "chunk" is the front of the chunk for the purpose of most of @@ -1206,20 +1199,20 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Free chunks are stored in circular doubly-linked lists, and look like this: chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | Size of previous chunk | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Size of previous chunk | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ `head:' | Size of chunk, in bytes |P| mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | Forward pointer to next chunk in list | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | Back pointer to previous chunk in list | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | Unused space (may be 0 bytes long) . - . . - . | + | Forward pointer to next chunk in list | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Back pointer to previous chunk in list | + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | Unused space (may be 0 bytes long) . + . . + . | nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ `foot:' | Size of chunk, in bytes | - +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The P (PREV_INUSE) bit, stored in the unused low-order bit of the chunk size (which is always a multiple of two words), is an in-use @@ -1236,16 +1229,16 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The two exceptions to all this are 1. The special chunk `top', which doesn't bother using the - trailing size field since there is no - next contiguous chunk that would have to index off it. (After - initialization, `top' is forced to always exist. If it would - become less than MINSIZE bytes long, it is replenished via - malloc_extend_top.) + trailing size field since there is no + next contiguous chunk that would have to index off it. (After + initialization, `top' is forced to always exist. If it would + become less than MINSIZE bytes long, it is replenished via + malloc_extend_top.) 2. Chunks allocated via mmap, which have the second-lowest-order - bit (IS_MMAPPED) set in their size fields. Because they are - never merged or traversed from any other chunk, they have no - foot size or inuse information. + bit (IS_MMAPPED) set in their size fields. Because they are + never merged or traversed from any other chunk, they have no + foot size or inuse information. Available chunks are kept in any of several places (all declared below): @@ -1286,12 +1279,7 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ serviced via calls to mmap, and then later released via munmap. */ - - - - - /* sizes, alignments */ #define SIZE_SZ (sizeof(INTERNAL_SIZE_T)) @@ -1531,7 +1519,7 @@ void malloc_bin_reloc (void) ((((unsigned long)(sz)) >> 9) <= 84) ? 110 + (((unsigned long)(sz)) >> 12): \ ((((unsigned long)(sz)) >> 9) <= 340) ? 119 + (((unsigned long)(sz)) >> 15): \ ((((unsigned long)(sz)) >> 9) <= 1364) ? 124 + (((unsigned long)(sz)) >> 18): \ - 126) + 126) /* bins for chunks < 512 are all spaced 8 bytes apart, and hold identically sized chunks. This is exploited in malloc. @@ -1829,7 +1817,6 @@ static void do_check_malloced_chunk(p, s) mchunkptr p; INTERNAL_SIZE_T s; (last_remainder->fd = last_remainder->bk = last_remainder) - @@ -2030,7 +2017,7 @@ static void malloc_extend_top(nb) INTERNAL_SIZE_T nb; /* Guarantee the next brk will be at a page boundary */ correction += ((((unsigned long)(brk + sbrk_size))+(pagesz-1)) & - ~(pagesz - 1)) - ((unsigned long)(brk + sbrk_size)); + ~(pagesz - 1)) - ((unsigned long)(brk + sbrk_size)); /* Allocate correction */ new_brk = (char*)(MORECORE (correction)); @@ -2051,20 +2038,20 @@ static void malloc_extend_top(nb) INTERNAL_SIZE_T nb; /* If not enough space to do this, then user did something very wrong */ if (old_top_size < MINSIZE) { - set_head(top, PREV_INUSE); /* will force null return from malloc */ - return; + set_head(top, PREV_INUSE); /* will force null return from malloc */ + return; } /* Also keep size a multiple of MALLOC_ALIGNMENT */ old_top_size = (old_top_size - 3*SIZE_SZ) & ~MALLOC_ALIGN_MASK; set_head_size(old_top, old_top_size); chunk_at_offset(old_top, old_top_size )->size = - SIZE_SZ|PREV_INUSE; + SIZE_SZ|PREV_INUSE; chunk_at_offset(old_top, old_top_size + SIZE_SZ)->size = - SIZE_SZ|PREV_INUSE; + SIZE_SZ|PREV_INUSE; /* If possible, release the rest. */ if (old_top_size >= MINSIZE) - fREe(chunk2mem(old_top)); + fREe(chunk2mem(old_top)); } } @@ -2095,43 +2082,43 @@ static void malloc_extend_top(nb) INTERNAL_SIZE_T nb; From there, the first successful of the following steps is taken: 1. The bin corresponding to the request size is scanned, and if - a chunk of exactly the right size is found, it is taken. + a chunk of exactly the right size is found, it is taken. 2. The most recently remaindered chunk is used if it is big - enough. This is a form of (roving) first fit, used only in - the absence of exact fits. Runs of consecutive requests use - the remainder of the chunk used for the previous such request - whenever possible. This limited use of a first-fit style - allocation strategy tends to give contiguous chunks - coextensive lifetimes, which improves locality and can reduce - fragmentation in the long run. + enough. This is a form of (roving) first fit, used only in + the absence of exact fits. Runs of consecutive requests use + the remainder of the chunk used for the previous such request + whenever possible. This limited use of a first-fit style + allocation strategy tends to give contiguous chunks + coextensive lifetimes, which improves locality and can reduce + fragmentation in the long run. 3. Other bins are scanned in increasing size order, using a - chunk big enough to fulfill the request, and splitting off - any remainder. This search is strictly by best-fit; i.e., - the smallest (with ties going to approximately the least - recently used) chunk that fits is selected. + chunk big enough to fulfill the request, and splitting off + any remainder. This search is strictly by best-fit; i.e., + the smallest (with ties going to approximately the least + recently used) chunk that fits is selected. 4. If large enough, the chunk bordering the end of memory - (`top') is split off. (This use of `top' is in accord with - the best-fit search rule. In effect, `top' is treated as - larger (and thus less well fitting) than any other available - chunk since it can be extended to be as large as necessary - (up to system limitations). + (`top') is split off. (This use of `top' is in accord with + the best-fit search rule. In effect, `top' is treated as + larger (and thus less well fitting) than any other available + chunk since it can be extended to be as large as necessary + (up to system limitations). 5. If the request size meets the mmap threshold and the - system supports mmap, and there are few enough currently - allocated mmapped regions, and a call to mmap succeeds, - the request is allocated via direct memory mapping. + system supports mmap, and there are few enough currently + allocated mmapped regions, and a call to mmap succeeds, + the request is allocated via direct memory mapping. 6. Otherwise, the top of memory is extended by - obtaining more space from the system (normally using sbrk, - but definable to anything else via the MORECORE macro). - Memory is gathered from the system (in system page-sized - units) in a way that allows chunks obtained across different - sbrk calls to be consolidated, but does not require - contiguous memory. Thus, it should be safe to intersperse - mallocs with other sbrk calls. + obtaining more space from the system (normally using sbrk, + but definable to anything else via the MORECORE macro). + Memory is gathered from the system (in system page-sized + units) in a way that allows chunks obtained across different + sbrk calls to be consolidated, but does not require + contiguous memory. Thus, it should be safe to intersperse + mallocs with other sbrk calls. All allocations are made from the the `lowest' part of any found @@ -2208,16 +2195,16 @@ Void_t* mALLOc(bytes) size_t bytes; if (remainder_size >= (long)MINSIZE) /* too big */ { - --idx; /* adjust to rescan below after checking last remainder */ - break; + --idx; /* adjust to rescan below after checking last remainder */ + break; } else if (remainder_size >= 0) /* exact fit */ { - unlink(victim, bck, fwd); - set_inuse_bit_at_offset(victim, victim_size); - check_malloced_chunk(victim, nb); - return chunk2mem(victim); + unlink(victim, bck, fwd); + set_inuse_bit_at_offset(victim, victim_size); + check_malloced_chunk(victim, nb); + return chunk2mem(victim); } } @@ -2274,8 +2261,8 @@ Void_t* mALLOc(bytes) size_t bytes; block <<= 1; while ((block & binblocks) == 0) { - idx += BINBLOCKWIDTH; - block <<= 1; + idx += BINBLOCKWIDTH; + block <<= 1; } } @@ -2288,34 +2275,34 @@ Void_t* mALLOc(bytes) size_t bytes; /* For each bin in this block ... */ do { - /* Find and use first big enough chunk ... */ - - for (victim = last(bin); victim != bin; victim = victim->bk) - { - victim_size = chunksize(victim); - remainder_size = victim_size - nb; - - if (remainder_size >= (long)MINSIZE) /* split */ - { - remainder = chunk_at_offset(victim, nb); - set_head(victim, nb | PREV_INUSE); - unlink(victim, bck, fwd); - link_last_remainder(remainder); - set_head(remainder, remainder_size | PREV_INUSE); - set_foot(remainder, remainder_size); - check_malloced_chunk(victim, nb); - return chunk2mem(victim); - } - - else if (remainder_size >= 0) /* take */ - { - set_inuse_bit_at_offset(victim, victim_size); - unlink(victim, bck, fwd); - check_malloced_chunk(victim, nb); - return chunk2mem(victim); - } - - } + /* Find and use first big enough chunk ... */ + + for (victim = last(bin); victim != bin; victim = victim->bk) + { + victim_size = chunksize(victim); + remainder_size = victim_size - nb; + + if (remainder_size >= (long)MINSIZE) /* split */ + { + remainder = chunk_at_offset(victim, nb); + set_head(victim, nb | PREV_INUSE); + unlink(victim, bck, fwd); + link_last_remainder(remainder); + set_head(remainder, remainder_size | PREV_INUSE); + set_foot(remainder, remainder_size); + check_malloced_chunk(victim, nb); + return chunk2mem(victim); + } + + else if (remainder_size >= 0) /* take */ + { + set_inuse_bit_at_offset(victim, victim_size); + unlink(victim, bck, fwd); + check_malloced_chunk(victim, nb); + return chunk2mem(victim); + } + + } bin = next_bin(bin); @@ -2325,12 +2312,12 @@ Void_t* mALLOc(bytes) size_t bytes; do /* Possibly backtrack to try to clear a partial block */ { - if ((startidx & (BINBLOCKWIDTH - 1)) == 0) - { - binblocks &= ~block; - break; - } - --startidx; + if ((startidx & (BINBLOCKWIDTH - 1)) == 0) + { + binblocks &= ~block; + break; + } + --startidx; q = prev_bin(q); } while (first(q) == q); @@ -2338,14 +2325,14 @@ Void_t* mALLOc(bytes) size_t bytes; if ( (block <<= 1) <= binblocks && (block != 0) ) { - while ((block & binblocks) == 0) - { - idx += BINBLOCKWIDTH; - block <<= 1; - } + while ((block & binblocks) == 0) + { + idx += BINBLOCKWIDTH; + block <<= 1; + } } else - break; + break; } } @@ -2359,7 +2346,7 @@ Void_t* mALLOc(bytes) size_t bytes; #if HAVE_MMAP /* If big and would otherwise need to extend, try to use mmap instead */ if ((unsigned long)nb >= (unsigned long)mmap_threshold && - (victim = mmap_chunk(nb)) != 0) + (victim = mmap_chunk(nb)) != 0) return chunk2mem(victim); #endif @@ -2392,13 +2379,13 @@ Void_t* mALLOc(bytes) size_t bytes; 2. If the chunk was allocated via mmap, it is release via munmap(). 3. If a returned chunk borders the current high end of memory, - it is consolidated into the top, and if the total unused - topmost memory exceeds the trim threshold, malloc_trim is - called. + it is consolidated into the top, and if the total unused + topmost memory exceeds the trim threshold, malloc_trim is + called. 4. Other chunks are consolidated as they arrive, and - placed in corresponding bins. (This includes the case of - consolidating with the current `last_remainder'). + placed in corresponding bins. (This includes the case of + consolidating with the current `last_remainder'). */ @@ -2610,22 +2597,22 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; /* Forward into top only if a remainder */ if (next == top) { - if ((long)(nextsize + newsize) >= (long)(nb + MINSIZE)) - { - newsize += nextsize; - top = chunk_at_offset(oldp, nb); - set_head(top, (newsize - nb) | PREV_INUSE); - set_head_size(oldp, nb); - return chunk2mem(oldp); - } + if ((long)(nextsize + newsize) >= (long)(nb + MINSIZE)) + { + newsize += nextsize; + top = chunk_at_offset(oldp, nb); + set_head(top, (newsize - nb) | PREV_INUSE); + set_head_size(oldp, nb); + return chunk2mem(oldp); + } } /* Forward into next chunk */ else if (((long)(nextsize + newsize) >= (long)(nb))) { - unlink(next, bck, fwd); - newsize += nextsize; - goto split; + unlink(next, bck, fwd); + newsize += nextsize; + goto split; } } else @@ -2645,45 +2632,45 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; if (next != 0) { - /* into top */ - if (next == top) - { - if ((long)(nextsize + prevsize + newsize) >= (long)(nb + MINSIZE)) - { - unlink(prev, bck, fwd); - newp = prev; - newsize += prevsize + nextsize; - newmem = chunk2mem(newp); - MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ); - top = chunk_at_offset(newp, nb); - set_head(top, (newsize - nb) | PREV_INUSE); - set_head_size(newp, nb); - return newmem; - } - } - - /* into next chunk */ - else if (((long)(nextsize + prevsize + newsize) >= (long)(nb))) - { - unlink(next, bck, fwd); - unlink(prev, bck, fwd); - newp = prev; - newsize += nextsize + prevsize; - newmem = chunk2mem(newp); - MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ); - goto split; - } + /* into top */ + if (next == top) + { + if ((long)(nextsize + prevsize + newsize) >= (long)(nb + MINSIZE)) + { + unlink(prev, bck, fwd); + newp = prev; + newsize += prevsize + nextsize; + newmem = chunk2mem(newp); + MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ); + top = chunk_at_offset(newp, nb); + set_head(top, (newsize - nb) | PREV_INUSE); + set_head_size(newp, nb); + return newmem; + } + } + + /* into next chunk */ + else if (((long)(nextsize + prevsize + newsize) >= (long)(nb))) + { + unlink(next, bck, fwd); + unlink(prev, bck, fwd); + newp = prev; + newsize += nextsize + prevsize; + newmem = chunk2mem(newp); + MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ); + goto split; + } } /* backward only */ if (prev != 0 && (long)(prevsize + newsize) >= (long)nb) { - unlink(prev, bck, fwd); - newp = prev; - newsize += prevsize; - newmem = chunk2mem(newp); - MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ); - goto split; + unlink(prev, bck, fwd); + newp = prev; + newsize += prevsize; + newmem = chunk2mem(newp); + MALLOC_COPY(newmem, oldmem, oldsize - SIZE_SZ); + goto split; } } @@ -3015,25 +3002,25 @@ int malloc_trim(pad) size_t pad; if (new_brk == (char*)(MORECORE_FAILURE)) /* sbrk failed? */ { - /* Try to figure out what we have */ - current_brk = (char*)(MORECORE (0)); - top_size = current_brk - (char*)top; - if (top_size >= (long)MINSIZE) /* if not, we are very very dead! */ - { - sbrked_mem = current_brk - sbrk_base; - set_head(top, top_size | PREV_INUSE); - } - check_chunk(top); - return 0; + /* Try to figure out what we have */ + current_brk = (char*)(MORECORE (0)); + top_size = current_brk - (char*)top; + if (top_size >= (long)MINSIZE) /* if not, we are very very dead! */ + { + sbrked_mem = current_brk - sbrk_base; + set_head(top, top_size | PREV_INUSE); + } + check_chunk(top); + return 0; } else { - /* Success. Adjust top accordingly. */ - set_head(top, (top_size - extra) | PREV_INUSE); - sbrked_mem -= extra; - check_chunk(top); - return 1; + /* Success. Adjust top accordingly. */ + set_head(top, (top_size - extra) | PREV_INUSE); + sbrked_mem -= extra; + check_chunk(top); + return 1; } } } @@ -3100,9 +3087,9 @@ static void malloc_update_mallinfo() #ifdef DEBUG check_free_chunk(p); for (q = next_chunk(p); - q < top && inuse(q) && (long)(chunksize(q)) >= (long)MINSIZE; - q = next_chunk(q)) - check_inuse_chunk(q); + q < top && inuse(q) && (long)(chunksize(q)) >= (long)MINSIZE; + q = next_chunk(q)) + check_inuse_chunk(q); #endif avail += chunksize(p); navail++; @@ -3141,14 +3128,14 @@ void malloc_stats() { malloc_update_mallinfo(); printf("max system bytes = %10u\n", - (unsigned int)(max_total_mem)); + (unsigned int)(max_total_mem)); printf("system bytes = %10u\n", - (unsigned int)(sbrked_mem + mmapped_mem)); + (unsigned int)(sbrked_mem + mmapped_mem)); printf("in use bytes = %10u\n", - (unsigned int)(current_mallinfo.uordblks + mmapped_mem)); + (unsigned int)(current_mallinfo.uordblks + mmapped_mem)); #if HAVE_MMAP printf("max mmap regions = %10u\n", - (unsigned int)max_n_mmaps); + (unsigned int)max_n_mmaps); #endif } #endif /* 0 */ @@ -3214,17 +3201,17 @@ History: V2.6.6 Sun Dec 5 07:42:19 1999 Doug Lea (dl at gee) * return null for negative arguments * Added Several WIN32 cleanups from Martin C. Fong - * Add 'LACKS_SYS_PARAM_H' for those systems without 'sys/param.h' - (e.g. WIN32 platforms) - * Cleanup up header file inclusion for WIN32 platforms - * Cleanup code to avoid Microsoft Visual C++ compiler complaints - * Add 'USE_DL_PREFIX' to quickly allow co-existence with existing - memory allocation routines - * Set 'malloc_getpagesize' for WIN32 platforms (needs more work) - * Use 'assert' rather than 'ASSERT' in WIN32 code to conform to + * Add 'LACKS_SYS_PARAM_H' for those systems without 'sys/param.h' + (e.g. WIN32 platforms) + * Cleanup up header file inclusion for WIN32 platforms + * Cleanup code to avoid Microsoft Visual C++ compiler complaints + * Add 'USE_DL_PREFIX' to quickly allow co-existence with existing + memory allocation routines + * Set 'malloc_getpagesize' for WIN32 platforms (needs more work) + * Use 'assert' rather than 'ASSERT' in WIN32 code to conform to usage of 'assert' in non-WIN32 code - * Improve WIN32 'sbrk()' emulation's 'findRegion()' routine to - avoid infinite loop + * Improve WIN32 'sbrk()' emulation's 'findRegion()' routine to + avoid infinite loop * Always call 'fREe()' rather than 'free()' V2.6.5 Wed Jun 17 15:57:31 1998 Doug Lea (dl at gee) @@ -3236,13 +3223,13 @@ History: * Added anonymously donated WIN32 sbrk emulation * Malloc, calloc, getpagesize: add optimizations from Raymond Nijssen * malloc_extend_top: fix mask error that caused wastage after - foreign sbrks + foreign sbrks * Add linux mremap support code from HJ Liu V2.6.2 Tue Dec 5 06:52:55 1995 Doug Lea (dl at gee) * Integrated most documentation with the code. * Add support for mmap, with help from - Wolfram Gloger (Gloger@lrz.uni-muenchen.de). + Wolfram Gloger (Gloger@lrz.uni-muenchen.de). * Use last_remainder in more cases. * Pack bins using idea from colin@nyx10.cs.du.edu * Use ordered bins instead of best-fit threshhold @@ -3250,34 +3237,34 @@ History: * Support another case of realloc via move into top * Fix error occuring when initial sbrk_base not word-aligned. * Rely on page size for units instead of SBRK_UNIT to - avoid surprises about sbrk alignment conventions. + avoid surprises about sbrk alignment conventions. * Add mallinfo, mallopt. Thanks to Raymond Nijssen - (raymond@es.ele.tue.nl) for the suggestion. + (raymond@es.ele.tue.nl) for the suggestion. * Add `pad' argument to malloc_trim and top_pad mallopt parameter. * More precautions for cases where other routines call sbrk, - courtesy of Wolfram Gloger (Gloger@lrz.uni-muenchen.de). + courtesy of Wolfram Gloger (Gloger@lrz.uni-muenchen.de). * Added macros etc., allowing use in linux libc from - H.J. Lu (hjl@gnu.ai.mit.edu) + H.J. Lu (hjl@gnu.ai.mit.edu) * Inverted this history list V2.6.1 Sat Dec 2 14:10:57 1995 Doug Lea (dl at gee) * Re-tuned and fixed to behave more nicely with V2.6.0 changes. * Removed all preallocation code since under current scheme - the work required to undo bad preallocations exceeds - the work saved in good cases for most test programs. + the work required to undo bad preallocations exceeds + the work saved in good cases for most test programs. * No longer use return list or unconsolidated bins since - no scheme using them consistently outperforms those that don't - given above changes. + no scheme using them consistently outperforms those that don't + given above changes. * Use best fit for very large chunks to prevent some worst-cases. * Added some support for debugging V2.6.0 Sat Nov 4 07:05:23 1995 Doug Lea (dl at gee) * Removed footers when chunks are in use. Thanks to - Paul Wilson (wilson@cs.texas.edu) for the suggestion. + Paul Wilson (wilson@cs.texas.edu) for the suggestion. V2.5.4 Wed Nov 1 07:54:51 1995 Doug Lea (dl at gee) * Added malloc_trim, with help from Wolfram Gloger - (wmglo@Dent.MED.Uni-Muenchen.DE). + (wmglo@Dent.MED.Uni-Muenchen.DE). V2.5.3 Tue Apr 26 10:16:01 1994 Doug Lea (dl at g) @@ -3293,11 +3280,11 @@ History: V2.5.1 Sat Aug 14 15:40:43 1993 Doug Lea (dl at g) * faster bin computation & slightly different binning * merged all consolidations to one part of malloc proper - (eliminating old malloc_find_space & malloc_clean_bin) + (eliminating old malloc_find_space & malloc_clean_bin) * Scan 2 returns chunks (not just 1) * Propagate failure in realloc if malloc returns 0 * Add stuff to allow compilation on non-ANSI compilers - from kpv@research.att.com + from kpv@research.att.com V2.5 Sat Aug 7 07:41:59 1993 Doug Lea (dl at g.oswego.edu) * removed potential for odd address access in prev_chunk @@ -3305,13 +3292,11 @@ History: * misc cosmetics and a bit more internal documentation * anticosmetics: mangled names in macros to evade debugger strangeness * tested on sparc, hp-700, dec-mips, rs6000 - with gcc & native cc (hp, dec only) allowing - Detlefs & Zorn comparison study (in SIGPLAN Notices.) + with gcc & native cc (hp, dec only) allowing + Detlefs & Zorn comparison study (in SIGPLAN Notices.) Trial version Fri Aug 28 13:14:29 1992 Doug Lea (dl at g.oswego.edu) * Based loosely on libg++-1.2X malloc. (It retains some of the overall - structure of old version, but most details differ.) + structure of old version, but most details differ.) */ - - -- cgit v1.2.1