From bea3f28d285942bf3f7ab339ce85178ded544225 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Wed, 12 Jul 2006 10:48:05 -0400 Subject: Add support for reading and writing mac addresses to or from ID EEPROM. Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). With attached patch, we can use command "mac/mac read/mac save/" to read and write EEPROM under u-boot prompt. U-boot will calculate the checksum of EEPROM while bootup, if it is right, then u-boot will check whether the mac address of eTSEC0/1/2/3 is availalbe (non-zero). If there is mac address availabe in EEPROM, u-boot will use it, otherewise, u-boot will use the mac address defined in MPC8641HPCN.h. This matches the requirement to set unique mac address for each TSEC port. Signed-off-by: Haiying Wang Signed-off-by: York Sun --- common/cmd_mac.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 common/cmd_mac.c (limited to 'common/cmd_mac.c') diff --git a/common/cmd_mac.c b/common/cmd_mac.c new file mode 100644 index 0000000000..0add43285f --- /dev/null +++ b/common/cmd_mac.c @@ -0,0 +1,66 @@ +/* + * Copyright 2006 Freescale Semiconductor + * York Sun (yorksun@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#ifdef CFG_ID_EEPROM + +extern int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +U_BOOT_CMD( + mac, 3, 1, do_mac, + "mac - display and program the system ID and MAC addresses in EEPROM\n", + "[read|save|id|num|errata|date|ports|0|1|2|3|4|5|6|7]\n" + "read\n" + " - show content of mac\n" + "mac save\n" + " - save to the EEPROM\n" + "mac id\n" + " - program system id\n" + "mac num\n" + " - program system serial number\n" + "mac errata\n" + " - program errata data\n" + "mac date\n" + " - program data date\n" + "mac ports\n" + " - program the number of ports\n" + "mac 0\n" + " - program the MAC address for port 0\n" + "mac 1\n" + " - program the MAC address for port 1\n" + "mac 2\n" + " - program the MAC address for port 2\n" + "mac 3\n" + " - program the MAC address for port 3\n" + "mac 4\n" + " - program the MAC address for port 4\n" + "mac 5\n" + " - program the MAC address for port 5\n" + "mac 6\n" + " - program the MAC address for port 6\n" + "mac 7\n" + " - program the MAC address for port 7\n" +); +#endif /* CFG_ID_EEPROM */ -- cgit v1.2.1