From e86e5a07485bc0f33103004594a28882c028e7af Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 17 Oct 2004 21:12:06 +0000 Subject: Code cleanup for GCC-3.3.x compilers --- board/ep7312/flash.c | 2 +- board/evb4510/flash.c | 3 +- board/impa7/flash.c | 544 +++++++++++++++++++++-------------------- board/lart/flash.c | 1 + board/mpl/vcma9/flash.c | 623 +++++++++++++++++++++++------------------------ board/shannon/flash.c | 1 + board/smdk2400/flash.c | 2 +- board/smdk2410/flash.c | 625 ++++++++++++++++++++++++------------------------ board/trab/cmd_trab.c | 1 + board/trab/flash.c | 2 +- board/trab/memory.c | 2 +- board/trab/trab_fkt.c | 2 +- board/versatile/flash.c | 1 - board/xsengine/Makefile | 2 +- 14 files changed, 889 insertions(+), 922 deletions(-) (limited to 'board') diff --git a/board/ep7312/flash.c b/board/ep7312/flash.c index c687cc7365..272a9e5cce 100644 --- a/board/ep7312/flash.c +++ b/board/ep7312/flash.c @@ -109,7 +109,7 @@ void flash_print_info (flash_info_t * info) } printf ("\n"); - Done: +Done: ; } /*----------------------------------------------------------------------- diff --git a/board/evb4510/flash.c b/board/evb4510/flash.c index 5491827e0d..aff92f95e9 100644 --- a/board/evb4510/flash.c +++ b/board/evb4510/flash.c @@ -362,8 +362,7 @@ unsigned long flash_init (void) } #endif else { - printf (__FUNCTION__ - "(): Unable to detect PHYS_FLASH_1: 0x%08x\n", + printf ("flash_init(): Unable to detect PHYS_FLASH_1: 0x%08x\n", PHYS_FLASH_1); } diff --git a/board/impa7/flash.c b/board/impa7/flash.c index 3e380e5f49..ca76fe8327 100644 --- a/board/impa7/flash.c +++ b/board/impa7/flash.c @@ -28,338 +28,330 @@ #define MAIN_SECT_SIZE 0x20000 #define PARAM_SECT_SIZE 0x4000 -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /*----------------------------------------------------------------------- */ -ulong flash_init(void) +ulong flash_init (void) { - int i, j; - ulong size = 0; - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) - { - ulong flashbase = 0; - flash_info[i].flash_id = - (INTEL_MANUFACT & FLASH_VENDMASK) | - (INTEL_ID_28F320B3T & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else if (i == 1) - flashbase = PHYS_FLASH_2; - else - panic("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) - { - if (j <= 7) - { - flash_info[i].start[j] = flashbase + j * PARAM_SECT_SIZE; - } - else - { - flash_info[i].start[j] = flashbase + (j - 7)*MAIN_SECT_SIZE; - } + int i, j; + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + + flash_info[i].flash_id = + (INTEL_MANUFACT & FLASH_VENDMASK) | + (INTEL_ID_28F320B3T & FLASH_TYPEMASK); + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + if (i == 0) + flashbase = PHYS_FLASH_1; + else if (i == 1) + flashbase = PHYS_FLASH_2; + else + panic ("configured too many flash banks!\n"); + for (j = 0; j < flash_info[i].sector_count; j++) { + if (j <= 7) { + flash_info[i].start[j] = + flashbase + j * PARAM_SECT_SIZE; + } else { + flash_info[i].start[j] = + flashbase + (j - 7) * MAIN_SECT_SIZE; + } + } + size += flash_info[i].size; } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect(FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, - &flash_info[0]); - - return size; -} -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) - { - case (INTEL_MANUFACT & FLASH_VENDMASK): - printf("Intel: "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) - { - case (INTEL_ID_28F320B3T & FLASH_TYPEMASK): - printf("28F320F3B (16Mbit)\n"); - break; - default: - printf("Unknown Chip Type\n"); - goto Done; - break; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) - { - if ((i % 5) == 0) - { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); + /* Protect monitor and environment sectors + */ + flash_protect (FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + monitor_flash_len - 1, + &flash_info[0]); + + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); -Done: + return size; } /*----------------------------------------------------------------------- */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) +void flash_print_info (flash_info_t * info) { - int flag, prot, sect; - int rc = ERR_OK; - - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (INTEL_MANUFACT & FLASH_VENDMASK): + printf ("Intel: "); + break; + default: + printf ("Unknown Vendor "); + break; + } - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } + switch (info->flash_id & FLASH_TYPEMASK) { + case (INTEL_ID_28F320B3T & FLASH_TYPEMASK): + printf ("28F320F3B (16Mbit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + goto Done; + break; + } - if ((info->flash_id & FLASH_VENDMASK) != - (INTEL_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); + } + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); } - } - if (prot) - return ERR_PROTECTED; + printf ("\n"); - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts(); + Done:; +} - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && !ctrlc(); sect++) { +/*----------------------------------------------------------------------- + */ - printf("Erasing sector %2d ... ", sect); +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + int rc = ERR_OK; - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; - if (info->protect[sect] == 0) { /* not protected */ - vu_long *addr = (vu_long *)(info->start[sect]); + if ((s_first < 0) || (s_first > s_last)) { + return ERR_INVAL; + } - *addr = 0x00200020; /* erase setup */ - *addr = 0x00D000D0; /* erase confirm */ + if ((info->flash_id & FLASH_VENDMASK) != + (INTEL_MANUFACT & FLASH_VENDMASK)) { + return ERR_UNKNOWN_FLASH_VENDOR; + } - while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) { - *addr = 0x00B000B0; /* suspend erase */ - *addr = 0x00FF00FF; /* reset to read mode */ - rc = ERR_TIMOUT; - goto outahere; + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; } - } - - *addr = 0x00FF00FF; /* reset to read mode */ } - printf("ok.\n"); - } - if (ctrlc()) - printf("User Interrupt!\n"); + if (prot) + return ERR_PROTECTED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + flag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { + + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + if (info->protect[sect] == 0) { /* not protected */ + vu_long *addr = (vu_long *) (info->start[sect]); + + *addr = 0x00200020; /* erase setup */ + *addr = 0x00D000D0; /* erase confirm */ + + while ((*addr & 0x00800080) != 0x00800080) { + if (get_timer_masked () > + CFG_FLASH_ERASE_TOUT) { + *addr = 0x00B000B0; /* suspend erase */ + *addr = 0x00FF00FF; /* reset to read mode */ + rc = ERR_TIMOUT; + goto outahere; + } + } + + *addr = 0x00FF00FF; /* reset to read mode */ + } + printf ("ok.\n"); + } + if (ctrlc ()) + printf ("User Interrupt!\n"); -outahere: + outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked(10000); + /* allow flash to settle - wait 10 ms */ + udelay_masked (10000); - if (flag) - enable_interrupts(); + if (flag) + enable_interrupts (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash */ -static int write_word (flash_info_t *info, ulong dest, ulong data) +static int write_word (flash_info_t * info, ulong dest, ulong data) { - vu_long *addr = (vu_long *)dest; - ulong barf; - int rc = ERR_OK; - int flag; - - /* Check if Flash is (sufficiently) erased - */ - if ((*addr & data) != data) - return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts(); - - /* clear status register command */ - *addr = 0x00500050; - - /* program set-up command */ - *addr = 0x00400040; - - /* latch address/data */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - - /* read status register command */ - *addr = 0x00700070; - - /* wait while polling the status register */ - while((*addr & 0x00800080) != 0x00800080) - { - if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) { - rc = ERR_TIMOUT; - /* suspend program command */ - *addr = 0x00B000B0; - goto outahere; - } + vu_long *addr = (vu_long *) dest; + ulong barf; + int rc = ERR_OK; + int flag; + + /* Check if Flash is (sufficiently) erased + */ + if ((*addr & data) != data) + return ERR_NOT_ERASED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + flag = disable_interrupts (); + + /* clear status register command */ + *addr = 0x00500050; + + /* program set-up command */ + *addr = 0x00400040; + + /* latch address/data */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* read status register command */ + *addr = 0x00700070; + + /* wait while polling the status register */ + while ((*addr & 0x00800080) != 0x00800080) { + if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + rc = ERR_TIMOUT; + /* suspend program command */ + *addr = 0x00B000B0; + goto outahere; + } - if( *addr & 0x003A003A) { /* check for error */ - barf = *addr; - if( barf & 0x003A0000) { - barf >>=16; - } else { - barf &= 0x0000003A; - } - printf("\nFlash write error %02lx at address %08lx\n", - barf, (unsigned long)dest); - if(barf & 0x0002) { - printf("Block locked, not erased.\n"); - rc = ERR_NOT_ERASED; - goto outahere; - } - if(barf & 0x0010) { - printf("Programming error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - if(barf & 0x0008) { - printf("Vpp Low error.\n"); - rc = ERR_PROG_ERROR; - goto outahere; - } - rc = ERR_PROG_ERROR; - goto outahere; + if (*addr & 0x003A003A) { /* check for error */ + barf = *addr; + if (barf & 0x003A0000) { + barf >>= 16; + } else { + barf &= 0x0000003A; + } + printf ("\nFlash write error %02lx at address %08lx\n", barf, (unsigned long) dest); + if (barf & 0x0002) { + printf ("Block locked, not erased.\n"); + rc = ERR_NOT_ERASED; + goto outahere; + } + if (barf & 0x0010) { + printf ("Programming error.\n"); + rc = ERR_PROG_ERROR; + goto outahere; + } + if (barf & 0x0008) { + printf ("Vpp Low error.\n"); + rc = ERR_PROG_ERROR; + goto outahere; + } + rc = ERR_PROG_ERROR; + goto outahere; + } } - } -outahere: - /* read array command */ - *addr = 0x00FF00FF; + outahere: + /* read array command */ + *addr = 0x00FF00FF; - if (flag) - enable_interrupts(); + if (flag) + enable_interrupts (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash. */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { - ulong cp, wp, data; - int l; - int i, rc; - - wp = (addr & ~3); /* get lower word aligned address */ + ulong cp, wp, data; + int l; + int i, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 24); + } + for (; i < 4 && cnt > 0; ++i) { + data = (data >> 8) | (*src++ << 24); + --cnt; + ++cp; + } + for (; cnt == 0 && i < 4; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 24); + } - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i> 8) | (*(uchar *)cp << 24); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + wp += 4; } - for (; i<4 && cnt>0; ++i) { - data = (data >> 8) | (*src++ << 24); - --cnt; - ++cp; + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = *((vu_long *) src); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 4; + wp += 4; + cnt -= 4; } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 24); + + if (cnt == 0) { + return ERR_OK; } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { + data = (data >> 8) | (*src++ << 24); + --cnt; } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = *((vu_long*)src); - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); + for (; i < 4; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 24); } - src += 4; - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 24); - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 24); - } - - return write_word(info, wp, data); + + return write_word (info, wp, data); } diff --git a/board/lart/flash.c b/board/lart/flash.c index 013c2fd10f..5232ed2586 100644 --- a/board/lart/flash.c +++ b/board/lart/flash.c @@ -159,6 +159,7 @@ void flash_print_info (flash_info_t *info) printf ("\n"); Done: + ; } /*----------------------------------------------------------------------- diff --git a/board/mpl/vcma9/flash.c b/board/mpl/vcma9/flash.c index 35cf260f6a..ccfe1768f6 100644 --- a/board/mpl/vcma9/flash.c +++ b/board/mpl/vcma9/flash.c @@ -24,13 +24,13 @@ #include -ulong myflush(void); +ulong myflush (void); #define FLASH_BANK_SIZE PHYS_FLASH_SIZE -#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ +#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define CMD_READ_ARRAY 0x000000F0 @@ -47,7 +47,7 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define BIT_ERASE_DONE 0x00000080 #define BIT_RDY_MASK 0x00000080 #define BIT_PROGRAM_ERROR 0x00000020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ +#define BIT_TIMEOUT 0x80000000 /* our flag */ #define READY 1 #define ERR 2 @@ -56,390 +56,377 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /*----------------------------------------------------------------------- */ -ulong flash_init(void) +ulong flash_init (void) { - int i, j; - ulong size = 0; + int i, j; + ulong size = 0; - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) - { - ulong flashbase = 0; - flash_info[i].flash_id = + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + + flash_info[i].flash_id = #if defined(CONFIG_AMD_LV400) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV400B & FLASH_TYPEMASK); + (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_LV400B & FLASH_TYPEMASK); #elif defined(CONFIG_AMD_LV800) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV800B & FLASH_TYPEMASK); + (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_LV800B & FLASH_TYPEMASK); #else #error "Unknown flash configured" #endif - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) - { - if (j <= 3) - { - /* 1st one is 16 KB */ - if (j == 0) - { - flash_info[i].start[j] = flashbase + 0; - } - - /* 2nd and 3rd are both 8 KB */ - if ((j == 1) || (j == 2)) - { - flash_info[i].start[j] = flashbase + 0x4000 + (j-1)*0x2000; - } - - /* 4th 32 KB */ - if (j == 3) - { - flash_info[i].start[j] = flashbase + 0x8000; + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + if (i == 0) + flashbase = PHYS_FLASH_1; + else + panic ("configured too many flash banks!\n"); + for (j = 0; j < flash_info[i].sector_count; j++) { + if (j <= 3) { + /* 1st one is 16 KB */ + if (j == 0) { + flash_info[i].start[j] = + flashbase + 0; + } + + /* 2nd and 3rd are both 8 KB */ + if ((j == 1) || (j == 2)) { + flash_info[i].start[j] = + flashbase + 0x4000 + (j - + 1) * + 0x2000; + } + + /* 4th 32 KB */ + if (j == 3) { + flash_info[i].start[j] = + flashbase + 0x8000; + } + } else { + flash_info[i].start[j] = + flashbase + (j - 3) * MAIN_SECT_SIZE; + } } - } - else - { - flash_info[i].start[j] = flashbase + (j - 3)*MAIN_SECT_SIZE; - } + size += flash_info[i].size; } - size += flash_info[i].size; - } - flash_protect(FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); + flash_protect (FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + monitor_flash_len - 1, + &flash_info[0]); - flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, - &flash_info[0]); + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); - return size; + return size; } /*----------------------------------------------------------------------- */ -void flash_print_info (flash_info_t *info) +void flash_print_info (flash_info_t * info) { - int i; - - switch (info->flash_id & FLASH_VENDMASK) - { - case (AMD_MANUFACT & FLASH_VENDMASK): - puts("AMD: "); - break; - default: - puts("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) - { - case (AMD_ID_LV400B & FLASH_TYPEMASK): - puts("1x Amd29LV400BB (4Mbit)\n"); - break; - case (AMD_ID_LV800B & FLASH_TYPEMASK): - puts("1x Amd29LV800BB (8Mbit)\n"); - break; - default: - puts("Unknown Chip Type\n"); - goto Done; - break; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - puts(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) - { - if ((i % 5) == 0) - { - puts("\n "); + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (AMD_MANUFACT & FLASH_VENDMASK): + puts ("AMD: "); + break; + default: + puts ("Unknown Vendor "); + break; } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - puts("\n"); -Done: + switch (info->flash_id & FLASH_TYPEMASK) { + case (AMD_ID_LV400B & FLASH_TYPEMASK): + puts ("1x Amd29LV400BB (4Mbit)\n"); + break; + case (AMD_ID_LV800B & FLASH_TYPEMASK): + puts ("1x Amd29LV800BB (8Mbit)\n"); + break; + default: + puts ("Unknown Chip Type\n"); + goto Done; + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + puts (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + puts ("\n "); + } + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + puts ("\n"); + +Done: ; } /*----------------------------------------------------------------------- */ -int flash_erase (flash_info_t *info, int s_first, int s_last) +int flash_erase (flash_info_t * info, int s_first, int s_last) { - ushort result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip; - - /* first look for protection bits */ + ushort result; + int iflag, cflag, prot, sect; + int rc = ERR_OK; + int chip; - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; + /* first look for protection bits */ - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; + if ((s_first < 0) || (s_first > s_last)) { + return ERR_INVAL; } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && !ctrlc(); sect++) - { - printf("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - - if (info->protect[sect] == 0) - { /* not protected */ - vu_short *addr = (vu_short *)(info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip = 0; - do - { - result = *addr; + if ((info->flash_id & FLASH_VENDMASK) != + (AMD_MANUFACT & FLASH_VENDMASK)) { + return ERR_UNKNOWN_FLASH_VENDOR; + } - /* check timeout */ - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) - { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip = TMO; - break; + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; } - - if (!chip && (result & 0xFFFF) & BIT_ERASE_DONE) - chip = READY; - - if (!chip && (result & 0xFFFF) & BIT_PROGRAM_ERROR) - chip = ERR; - - } while (!chip); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip == ERR) - { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip == TMO) - { - rc = ERR_TIMOUT; - goto outahere; - } - - puts("ok.\n"); } - else /* it was protected */ - { - puts("protected!\n"); + if (prot) + return ERR_PROTECTED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + if (info->protect[sect] == 0) { /* not protected */ + vu_short *addr = (vu_short *) (info->start[sect]); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + *addr = CMD_ERASE_CONFIRM; + + /* wait until flash is ready */ + chip = 0; + + do { + result = *addr; + + /* check timeout */ + if (get_timer_masked () > + CFG_FLASH_ERASE_TOUT) { + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + chip = TMO; + break; + } + + if (!chip + && (result & 0xFFFF) & BIT_ERASE_DONE) + chip = READY; + + if (!chip + && (result & 0xFFFF) & BIT_PROGRAM_ERROR) + chip = ERR; + + } while (!chip); + + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + + if (chip == ERR) { + rc = ERR_PROG_ERROR; + goto outahere; + } + if (chip == TMO) { + rc = ERR_TIMOUT; + goto outahere; + } + + puts ("ok.\n"); + } else { /* it was protected */ + + puts ("protected!\n"); + } } - } - if (ctrlc()) - puts("User Interrupt!\n"); + if (ctrlc ()) + puts ("User Interrupt!\n"); -outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked(10000); + outahere: + /* allow flash to settle - wait 10 ms */ + udelay_masked (10000); - if (iflag) - enable_interrupts(); + if (iflag) + enable_interrupts (); - if (cflag) - icache_enable(); + if (cflag) + icache_enable (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash */ -volatile static int write_hword (flash_info_t *info, ulong dest, ushort data) +volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) { - vu_short *addr = (vu_short *)dest; - ushort result; - int rc = ERR_OK; - int cflag, iflag; - int chip; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - - /* wait until flash is ready */ - chip = 0; - do - { + vu_short *addr = (vu_short *) dest; + ushort result; + int rc = ERR_OK; + int cflag, iflag; + int chip; + + /* + * Check if Flash is (sufficiently) erased + */ result = *addr; + if ((result & data) != data) + return ERR_NOT_ERASED; + + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_PROGRAM; + *addr = data; - /* check timeout */ - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) - { - chip = ERR | TMO; - break; - } - if (!chip && ((result & 0x80) == (data & 0x80))) - chip = READY; + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); - if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) - { + /* wait until flash is ready */ + chip = 0; + do { result = *addr; - if ((result & 0x80) == (data & 0x80)) + /* check timeout */ + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + chip = ERR | TMO; + break; + } + if (!chip && ((result & 0x80) == (data & 0x80))) chip = READY; - else - chip = ERR; - } - } while (!chip); + if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { + result = *addr; + + if ((result & 0x80) == (data & 0x80)) + chip = READY; + else + chip = ERR; + } + + } while (!chip); - *addr = CMD_READ_ARRAY; + *addr = CMD_READ_ARRAY; - if (chip == ERR || *addr != data) - rc = ERR_PROG_ERROR; + if (chip == ERR || *addr != data) + rc = ERR_PROG_ERROR; - if (iflag) - enable_interrupts(); + if (iflag) + enable_interrupts (); - if (cflag) - icache_enable(); + if (cflag) + icache_enable (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash. */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { - ulong cp, wp; - int l; - int i, rc; - ushort data; - - wp = (addr & ~1); /* get lower word aligned address */ + ulong cp, wp; + int l; + int i, rc; + ushort data; + + wp = (addr & ~1); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); + } + for (; i < 2 && cnt > 0; ++i) { + data = (data >> 8) | (*src++ << 8); + --cnt; + ++cp; + } + for (; cnt == 0 && i < 2; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); + } - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i> 8) | (*(uchar *)cp << 8); + if ((rc = write_hword (info, wp, data)) != 0) { + return (rc); + } + wp += 2; } - for (; i<2 && cnt>0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; + + /* + * handle word aligned part + */ + while (cnt >= 2) { + data = *((vu_short *) src); + if ((rc = write_hword (info, wp, data)) != 0) { + return (rc); + } + src += 2; + wp += 2; + cnt -= 2; } - for (; cnt==0 && i<2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); + + if (cnt == 0) { + return ERR_OK; } - if ((rc = write_hword(info, wp, data)) != 0) { - return (rc); + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { + data = (data >> 8) | (*src++ << 8); + --cnt; } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - data = *((vu_short*)src); - if ((rc = write_hword(info, wp, data)) != 0) { - return (rc); + for (; i < 2; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i<2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); - } - - return write_hword(info, wp, data); + + return write_hword (info, wp, data); } diff --git a/board/shannon/flash.c b/board/shannon/flash.c index 65ebc279c5..13c01d8351 100644 --- a/board/shannon/flash.c +++ b/board/shannon/flash.c @@ -178,6 +178,7 @@ void flash_print_info (flash_info_t *info) printf ("\n"); Done: + ; } /*----------------------------------------------------------------------- diff --git a/board/smdk2400/flash.c b/board/smdk2400/flash.c index eb9eaa0deb..a108af7c72 100644 --- a/board/smdk2400/flash.c +++ b/board/smdk2400/flash.c @@ -149,7 +149,7 @@ void flash_print_info (flash_info_t * info) } printf ("\n"); - Done: +Done: ; } /*----------------------------------------------------------------------- diff --git a/board/smdk2410/flash.c b/board/smdk2410/flash.c index a37c6f8fb8..993946be93 100644 --- a/board/smdk2410/flash.c +++ b/board/smdk2410/flash.c @@ -24,13 +24,13 @@ #include -ulong myflush(void); +ulong myflush (void); #define FLASH_BANK_SIZE PHYS_FLASH_SIZE -#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ +#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define CMD_READ_ARRAY 0x000000F0 @@ -47,7 +47,7 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define BIT_ERASE_DONE 0x00000080 #define BIT_RDY_MASK 0x00000080 #define BIT_PROGRAM_ERROR 0x00000020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ +#define BIT_TIMEOUT 0x80000000 /* our flag */ #define READY 1 #define ERR 2 @@ -56,391 +56,378 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /*----------------------------------------------------------------------- */ -ulong flash_init(void) +ulong flash_init (void) { - int i, j; - ulong size = 0; + int i, j; + ulong size = 0; - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) - { - ulong flashbase = 0; - flash_info[i].flash_id = + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + + flash_info[i].flash_id = #if defined(CONFIG_AMD_LV400) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV400B & FLASH_TYPEMASK); + (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_LV400B & FLASH_TYPEMASK); #elif defined(CONFIG_AMD_LV800) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV800B & FLASH_TYPEMASK); + (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_LV800B & FLASH_TYPEMASK); #else #error "Unknown flash configured" #endif - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) - { - if (j <= 3) - { - /* 1st one is 16 KB */ - if (j == 0) - { - flash_info[i].start[j] = flashbase + 0; - } - - /* 2nd and 3rd are both 8 KB */ - if ((j == 1) || (j == 2)) - { - flash_info[i].start[j] = flashbase + 0x4000 + (j-1)*0x2000; - } - - /* 4th 32 KB */ - if (j == 3) - { - flash_info[i].start[j] = flashbase + 0x8000; + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + if (i == 0) + flashbase = PHYS_FLASH_1; + else + panic ("configured too many flash banks!\n"); + for (j = 0; j < flash_info[i].sector_count; j++) { + if (j <= 3) { + /* 1st one is 16 KB */ + if (j == 0) { + flash_info[i].start[j] = + flashbase + 0; + } + + /* 2nd and 3rd are both 8 KB */ + if ((j == 1) || (j == 2)) { + flash_info[i].start[j] = + flashbase + 0x4000 + (j - + 1) * + 0x2000; + } + + /* 4th 32 KB */ + if (j == 3) { + flash_info[i].start[j] = + flashbase + 0x8000; + } + } else { + flash_info[i].start[j] = + flashbase + (j - 3) * MAIN_SECT_SIZE; + } } - } - else - { - flash_info[i].start[j] = flashbase + (j - 3)*MAIN_SECT_SIZE; - } + size += flash_info[i].size; } - size += flash_info[i].size; - } - flash_protect(FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); + flash_protect (FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + monitor_flash_len - 1, + &flash_info[0]); - flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, - &flash_info[0]); + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); - return size; + return size; } /*----------------------------------------------------------------------- */ -void flash_print_info (flash_info_t *info) +void flash_print_info (flash_info_t * info) { - int i; - - switch (info->flash_id & FLASH_VENDMASK) - { - case (AMD_MANUFACT & FLASH_VENDMASK): - printf("AMD: "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) - { - case (AMD_ID_LV400B & FLASH_TYPEMASK): - printf("1x Amd29LV400BB (4Mbit)\n"); - break; - case (AMD_ID_LV800B & FLASH_TYPEMASK): - printf("1x Amd29LV800BB (8Mbit)\n"); - break; - default: - printf("Unknown Chip Type\n"); - goto Done; - break; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) - { - if ((i % 5) == 0) - { - printf ("\n "); + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (AMD_MANUFACT & FLASH_VENDMASK): + printf ("AMD: "); + break; + default: + printf ("Unknown Vendor "); + break; } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); -Done: + switch (info->flash_id & FLASH_TYPEMASK) { + case (AMD_ID_LV400B & FLASH_TYPEMASK): + printf ("1x Amd29LV400BB (4Mbit)\n"); + break; + case (AMD_ID_LV800B & FLASH_TYPEMASK): + printf ("1x Amd29LV800BB (8Mbit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + goto Done; + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); + } + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + + Done:; } /*----------------------------------------------------------------------- */ -int flash_erase (flash_info_t *info, int s_first, int s_last) +int flash_erase (flash_info_t * info, int s_first, int s_last) { - ushort result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip; - - /* first look for protection bits */ + ushort result; + int iflag, cflag, prot, sect; + int rc = ERR_OK; + int chip; - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; + /* first look for protection bits */ - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; + if ((s_first < 0) || (s_first > s_last)) { + return ERR_INVAL; } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && !ctrlc(); sect++) - { - printf("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - - if (info->protect[sect] == 0) - { /* not protected */ - vu_short *addr = (vu_short *)(info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip = 0; - do - { - result = *addr; + if ((info->flash_id & FLASH_VENDMASK) != + (AMD_MANUFACT & FLASH_VENDMASK)) { + return ERR_UNKNOWN_FLASH_VENDOR; + } - /* check timeout */ - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) - { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip = TMO; - break; + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; } - - if (!chip && (result & 0xFFFF) & BIT_ERASE_DONE) - chip = READY; - - if (!chip && (result & 0xFFFF) & BIT_PROGRAM_ERROR) - chip = ERR; - - } while (!chip); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip == ERR) - { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip == TMO) - { - rc = ERR_TIMOUT; - goto outahere; - } - - printf("ok.\n"); } - else /* it was protected */ - { - printf("protected!\n"); + if (prot) + return ERR_PROTECTED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + if (info->protect[sect] == 0) { /* not protected */ + vu_short *addr = (vu_short *) (info->start[sect]); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + *addr = CMD_ERASE_CONFIRM; + + /* wait until flash is ready */ + chip = 0; + + do { + result = *addr; + + /* check timeout */ + if (get_timer_masked () > + CFG_FLASH_ERASE_TOUT) { + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + chip = TMO; + break; + } + + if (!chip + && (result & 0xFFFF) & BIT_ERASE_DONE) + chip = READY; + + if (!chip + && (result & 0xFFFF) & BIT_PROGRAM_ERROR) + chip = ERR; + + } while (!chip); + + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + + if (chip == ERR) { + rc = ERR_PROG_ERROR; + goto outahere; + } + if (chip == TMO) { + rc = ERR_TIMOUT; + goto outahere; + } + + printf ("ok.\n"); + } else { /* it was protected */ + + printf ("protected!\n"); + } } - } - if (ctrlc()) - printf("User Interrupt!\n"); + if (ctrlc ()) + printf ("User Interrupt!\n"); -outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked(10000); + outahere: + /* allow flash to settle - wait 10 ms */ + udelay_masked (10000); - if (iflag) - enable_interrupts(); + if (iflag) + enable_interrupts (); - if (cflag) - icache_enable(); + if (cflag) + icache_enable (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash */ -volatile static int write_hword (flash_info_t *info, ulong dest, ushort data) +volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) { - vu_short *addr = (vu_short *)dest; - ushort result; - int rc = ERR_OK; - int cflag, iflag; - int chip; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; - *addr = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - - /* wait until flash is ready */ - chip = 0; - do - { + vu_short *addr = (vu_short *) dest; + ushort result; + int rc = ERR_OK; + int cflag, iflag; + int chip; + + /* + * Check if Flash is (sufficiently) erased + */ result = *addr; + if ((result & data) != data) + return ERR_NOT_ERASED; + + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; + *addr = CMD_PROGRAM; + *addr = data; - /* check timeout */ - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) - { - chip = ERR | TMO; - break; - } - if (!chip && ((result & 0x80) == (data & 0x80))) - chip = READY; + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); - if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) - { + /* wait until flash is ready */ + chip = 0; + do { result = *addr; - if ((result & 0x80) == (data & 0x80)) + /* check timeout */ + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + chip = ERR | TMO; + break; + } + if (!chip && ((result & 0x80) == (data & 0x80))) chip = READY; - else - chip = ERR; - } - } while (!chip); + if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { + result = *addr; + + if ((result & 0x80) == (data & 0x80)) + chip = READY; + else + chip = ERR; + } + + } while (!chip); - *addr = CMD_READ_ARRAY; + *addr = CMD_READ_ARRAY; - if (chip == ERR || *addr != data) - rc = ERR_PROG_ERROR; + if (chip == ERR || *addr != data) + rc = ERR_PROG_ERROR; - if (iflag) - enable_interrupts(); + if (iflag) + enable_interrupts (); - if (cflag) - icache_enable(); + if (cflag) + icache_enable (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash. */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { - ulong cp, wp; - int l; - int i, rc; - ushort data; - - wp = (addr & ~1); /* get lower word aligned address */ + ulong cp, wp; + int l; + int i, rc; + ushort data; + + wp = (addr & ~1); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); + } + for (; i < 2 && cnt > 0; ++i) { + data = (data >> 8) | (*src++ << 8); + --cnt; + ++cp; + } + for (; cnt == 0 && i < 2; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); + } - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i> 8) | (*(uchar *)cp << 8); + if ((rc = write_hword (info, wp, data)) != 0) { + return (rc); + } + wp += 2; } - for (; i<2 && cnt>0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; + + /* + * handle word aligned part + */ + while (cnt >= 2) { + data = *((vu_short *) src); + if ((rc = write_hword (info, wp, data)) != 0) { + return (rc); + } + src += 2; + wp += 2; + cnt -= 2; } - for (; cnt==0 && i<2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); + + if (cnt == 0) { + return ERR_OK; } - if ((rc = write_hword(info, wp, data)) != 0) { - return (rc); + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { + data = (data >> 8) | (*src++ << 8); + --cnt; } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - data = *((vu_short*)src); - if ((rc = write_hword(info, wp, data)) != 0) { - return (rc); + for (; i < 2; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i<2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); - } - - return write_hword(info, wp, data); + + return write_hword (info, wp, data); } diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index 509e071f4d..794c527186 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -718,6 +718,7 @@ static void led_set (unsigned int state) gpio->PADAT &= ~(1 << 12); break; default: + break; } } diff --git a/board/trab/flash.c b/board/trab/flash.c index 2cccee6475..b4435e390f 100644 --- a/board/trab/flash.c +++ b/board/trab/flash.c @@ -166,7 +166,7 @@ void flash_print_info (flash_info_t * info) } printf ("\n"); - Done: +Done: ; } /*----------------------------------------------------------------------- diff --git a/board/trab/memory.c b/board/trab/memory.c index 97cb0f89a4..9104413098 100644 --- a/board/trab/memory.c +++ b/board/trab/memory.c @@ -479,7 +479,7 @@ int memory_post_test (int flags) return ret; } -#endif 0 +#endif /* 0 */ /* #endif */ /* CONFIG_POST & CFG_POST_MEMORY */ /* #endif */ /* CONFIG_POST */ diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c index f51a356da4..abb3b29c8c 100644 --- a/board/trab/trab_fkt.c +++ b/board/trab/trab_fkt.c @@ -35,7 +35,7 @@ * command do_touch is invoked and the touch is not pressed within an specific * interval. */ -#undef CONFIG_TOUCH_WAIT_PRESSED 1 +#undef CONFIG_TOUCH_WAIT_PRESSED /* max time to wait for touch is pressed */ #ifndef CONFIG_TOUCH_WAIT_PRESSED diff --git a/board/versatile/flash.c b/board/versatile/flash.c index 477e70220a..71533719f7 100644 --- a/board/versatile/flash.c +++ b/board/versatile/flash.c @@ -239,7 +239,6 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info) info->flash_id += FLASH_28F256K3; info->sector_count = 256; info->size = 0x02000000; - printf ("\Intel StrataFlash 28F256K3C device initialized\n"); break; default: diff --git a/board/xsengine/Makefile b/board/xsengine/Makefile index df931e34a0..591b728de1 100644 --- a/board/xsengine/Makefile +++ b/board/xsengine/Makefile @@ -40,7 +40,7 @@ distclean: clean ######################################################################### .depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M --disassemble-all $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ -include .depend -- cgit v1.2.1