From ced0d849d8c9614981961ca028207acdcfa2b39c Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 7 Apr 2016 10:48:13 +0200 Subject: arm: mvebu: theadorable: Add USB power toggle and tweak USB PHY register This patch adds an USB power toggle for theadorable. Additionally, the USB PHY RX Channel Control 0 Register is changed to fix some issues noticed while accessing some specific USB sticks. Signed-off-by: Stefan Roese --- board/theadorable/theadorable.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'board') diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c index ee88a98a24..0756f186a6 100644 --- a/board/theadorable/theadorable.c +++ b/board/theadorable/theadorable.c @@ -5,6 +5,7 @@ */ #include +#include #include #include #include @@ -19,6 +20,10 @@ DECLARE_GLOBAL_DATA_PTR; +#define MV_USB_PHY_BASE (MVEBU_AXP_USB_BASE + 0x800) +#define PHY_CHANNEL_RX_CTRL0_REG(port, chan) \ + (MV_USB_PHY_BASE + ((port) << 12) + ((chan) << 6) + 0x8) + #define THEADORABLE_GPP_OUT_ENA_LOW 0x00336780 #define THEADORABLE_GPP_OUT_ENA_MID 0x00003cf0 #define THEADORABLE_GPP_OUT_ENA_HIGH (~(0x0)) @@ -27,6 +32,9 @@ DECLARE_GLOBAL_DATA_PTR; #define THEADORABLE_GPP_OUT_VAL_MID 0x0007000c #define THEADORABLE_GPP_OUT_VAL_HIGH 0x00000000 +#define GPIO_USB0_PWR_ON 18 +#define GPIO_USB1_PWR_ON 19 + /* DDR3 static configuration */ static MV_DRAM_MC_INIT ddr3_theadorable[MV_MAX_DDR3_STATIC_SIZE] = { {0x00001400, 0x7301ca28}, /* DDR SDRAM Configuration Register */ @@ -135,6 +143,8 @@ int board_early_init_f(void) int board_init(void) { + int ret; + /* adress of boot parameters */ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; @@ -147,6 +157,28 @@ int board_init(void) mbus_dt_setup_win(&mbus_state, SPI_BUS1_DEV2_BASE, SPI_BUS0_DEV1_SIZE, CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_SPI1_CS2); + /* + * Set RX Channel Control 0 Register: + * Tests have shown, that setting the LPF_COEF from 0 (1/8) + * to 3 (1/1) results in a more stable USB connection. + */ + setbits_le32(PHY_CHANNEL_RX_CTRL0_REG(0, 1), 0xc); + setbits_le32(PHY_CHANNEL_RX_CTRL0_REG(0, 2), 0xc); + setbits_le32(PHY_CHANNEL_RX_CTRL0_REG(0, 3), 0xc); + + /* Toggle USB power */ + ret = gpio_request(GPIO_USB0_PWR_ON, "USB0_PWR_ON"); + if (ret < 0) + return ret; + gpio_direction_output(GPIO_USB0_PWR_ON, 0); + ret = gpio_request(GPIO_USB1_PWR_ON, "USB1_PWR_ON"); + if (ret < 0) + return ret; + gpio_direction_output(GPIO_USB1_PWR_ON, 0); + mdelay(1); + gpio_set_value(GPIO_USB0_PWR_ON, 1); + gpio_set_value(GPIO_USB1_PWR_ON, 1); + return 0; } -- cgit v1.2.1