From c231d00f4ef881a1789e11afe5f3aceaa061725d Mon Sep 17 00:00:00 2001 From: stroese Date: Fri, 23 May 2003 11:32:53 +0000 Subject: Code reworked for PPC405EP support. --- board/esd/canbt/canbt.c | 6 +++--- board/esd/common/fpga.c | 37 ++++++++++++++++--------------------- 2 files changed, 19 insertions(+), 24 deletions(-) (limited to 'board') diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c index bc7f0c70f0..708101e2ad 100644 --- a/board/esd/canbt/canbt.c +++ b/board/esd/canbt/canbt.c @@ -114,9 +114,9 @@ int board_pre_init (void) /* * Setup port pins for normal operation */ - out32 (IBM405GP_GPIO0_ODR, 0x00000000); /* no open drain pins */ - out32 (IBM405GP_GPIO0_TCR, 0x07038100); /* setup for output */ - out32 (IBM405GP_GPIO0_OR, 0x07030100); /* set output pins to high (default) */ + out32 (GPIO0_ODR, 0x00000000); /* no open drain pins */ + out32 (GPIO0_TCR, 0x07038100); /* setup for output */ + out32 (GPIO0_OR, 0x07030100); /* set output pins to high (default) */ /* * IRQ 0-15 405GP internally generated; active high; level sensitive diff --git a/board/esd/common/fpga.c b/board/esd/common/fpga.c index 666b4908e0..50bce2e0f6 100644 --- a/board/esd/common/fpga.c +++ b/board/esd/common/fpga.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2001 + * (C) Copyright 2001-2003 * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com * @@ -36,11 +36,6 @@ #define MAX_ONES 226 -#define IBM405GP_GPIO0_OR 0xef600700 /* GPIO Output */ -#define IBM405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */ -#define IBM405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */ -#define IBM405GP_GPIO0_IR 0xef60071c /* GPIO Input */ - #ifdef CFG_FPGA_PRG # define FPGA_PRG CFG_FPGA_PRG /* FPGA program pin (ppc output)*/ # define FPGA_CLK CFG_FPGA_CLK /* FPGA clk pin (ppc output) */ @@ -59,7 +54,7 @@ #define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */ #define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */ -#define SET_FPGA(data) out32(IBM405GP_GPIO0_OR, data) +#define SET_FPGA(data) out32(GPIO0_OR, data) #define FPGA_WRITE_1 { \ SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \ @@ -120,12 +115,12 @@ static int fpga_boot(unsigned char *fpgadata, int size) /* * Setup port pins for fpga programming */ - out32(IBM405GP_GPIO0_ODR, 0x00000000); /* no open drain pins */ - out32(IBM405GP_GPIO0_TCR, FPGA_PRG | FPGA_CLK | FPGA_DATA); /* setup for output */ - out32(IBM405GP_GPIO0_OR, FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set output pins to high */ + out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ + out32(GPIO0_TCR, in32(GPIO0_TCR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* setup for output */ + out32(GPIO0_OR, in32(GPIO0_OR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set pins to high */ - DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); - DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); /* * Init fpga by asserting and deasserting PROGRAM* @@ -134,7 +129,7 @@ static int fpga_boot(unsigned char *fpgadata, int size) /* Wait for FPGA init line low */ count = 0; - while (in32(IBM405GP_GPIO0_IR) & FPGA_INIT) + while (in32(GPIO0_IR) & FPGA_INIT) { udelay(1000); /* wait 1ms */ /* Check for timeout - 100us max, so use 3ms */ @@ -145,15 +140,15 @@ static int fpga_boot(unsigned char *fpgadata, int size) } } - DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); - DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); /* deassert PROGRAM* */ SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* Wait for FPGA end of init period . */ count = 0; - while (!(in32(IBM405GP_GPIO0_IR) & FPGA_INIT)) + while (!(in32(GPIO0_IR) & FPGA_INIT)) { udelay(1000); /* wait 1ms */ /* Check for timeout */ @@ -164,8 +159,8 @@ static int fpga_boot(unsigned char *fpgadata, int size) } } - DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); - DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); DBG("write configuration data into fpga\n"); /* write configuration-data into fpga... */ @@ -237,8 +232,8 @@ static int fpga_boot(unsigned char *fpgadata, int size) } #endif - DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); - DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); /* * Check if fpga's DONE signal - correctly booted ? @@ -246,7 +241,7 @@ static int fpga_boot(unsigned char *fpgadata, int size) /* Wait for FPGA end of programming period . */ count = 0; - while (!(in32(IBM405GP_GPIO0_IR) & FPGA_DONE)) + while (!(in32(GPIO0_IR) & FPGA_DONE)) { udelay(1000); /* wait 1ms */ /* Check for timeout */ -- cgit v1.2.1