From 60820457ccf6e9c8b7a9afc2b45c78a84f8edda8 Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Thu, 22 Sep 2011 17:27:29 +0800 Subject: powerpc/p2041rdb: updated description of cpld command According to CPLD 2.2, the default configuration is changed, so updated the description of CPLD command, otherwise it will confusing. Signed-off-by: Shaohui Xie Signed-off-by: Kumar Gala --- board/freescale/p2041rdb/cpld.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'board') diff --git a/board/freescale/p2041rdb/cpld.c b/board/freescale/p2041rdb/cpld.c index 37b0ed5727..2ad89a84e2 100644 --- a/board/freescale/p2041rdb/cpld.c +++ b/board/freescale/p2041rdb/cpld.c @@ -159,14 +159,14 @@ U_BOOT_CMD( "cpld_cmd watchdog - set the watchdog period\n" " period: 1ms 10ms 30ms 100ms 1s 10s 60s disable\n" "cpld_cmd lane_mux - set multiplexed lane pin\n" - " lane 6: 0 -> slot1 (Default)\n" - " 1 -> SGMII\n" - " lane a: 0 -> slot2 (Default)\n" - " 1 -> AURORA\n" - " lane c: 0 -> slot2 (Default)\n" - " 1 -> SATA0\n" - " lane d: 0 -> slot2 (Default)\n" - " 1 -> SATA1\n" + " lane 6: 0 -> slot1\n" + " 1 -> SGMII (Default)\n" + " lane a: 0 -> slot2\n" + " 1 -> AURORA (Default)\n" + " lane c: 0 -> slot2\n" + " 1 -> SATA0 (Default)\n" + " lane d: 0 -> slot2\n" + " 1 -> SATA1 (Default)\n" #ifdef DEBUG "cpld_cmd dump - display the CPLD registers\n" #endif -- cgit v1.2.1