From 4adc1127f8c50c4361d0024e098a91e7050e7400 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:33 -0700 Subject: nitrogen6x: display: add support for LG-9.7 LVDS display Add support for LG 9.7" LVDS panel (1024x768) with integrated eGalax touch screen. Note that this panel differs only slightly from the Hannstar XGA panel (margins). No auto-detection is available because it shares the same touch controller as the Hannstar-XGA display, so you'll need to configure it through the 'panel' environment variable: U-Boot > setenv panel LG-9.7 U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 5e0461c54c..2200bc7c3b 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -553,6 +553,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = NULL, + .enable = enable_lvds, + .mode = { + .name = "LG-9.7", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, /* ~65MHz */ + .left_margin = 480, + .right_margin = 260, + .upper_margin = 16, + .lower_margin = 6, + .hsync_len = 250, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, .addr = 0x38, -- cgit v1.2.1