From 0a35cc9395b7e4e5bc2b1370016f7c3156f945a4 Mon Sep 17 00:00:00 2001 From: Marco Franchi Date: Fri, 10 Jun 2016 14:45:28 -0300 Subject: warp7: Fix watchdog reset The latest version of warp7 board provides the connection of the WDOG1_B pin to the PMIC. Program the watchdog to enable the WDOG1_B output which causes a POR reset. Based on the imx7dsabresd code. Signed-off-by: Marco Franchi Acked-by: Fabio Estevam --- board/warp7/warp7.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'board') diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c index 8c5bf9a524..27e31f35d5 100644 --- a/board/warp7/warp7.c +++ b/board/warp7/warp7.c @@ -32,6 +32,10 @@ int dram_init(void) return 0; } +static iomux_v3_cfg_t const wdog_pads[] = { + MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + static iomux_v3_cfg_t const uart1_pads[] = { MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), @@ -100,3 +104,20 @@ int board_usb_phy_mode(int port) { return USB_INIT_DEVICE; } + +int board_late_init(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + + set_wdog_reset(wdog); + + /* + * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4), + * since we use PMIC_PWRON to reset the board. + */ + clrsetbits_le16(&wdog->wcr, 0, 0x10); + + return 0; +} -- cgit v1.2.1