From a187559e3d586891c917279044c5386d1b2adc6e Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Fri, 5 Feb 2016 19:30:11 -0800 Subject: Use correct spelling of "U-Boot" Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng Reviewed-by: Heiko Schocher Reviewed-by: Simon Glass Reviewed-by: Minkyu Kang --- board/wandboard/README | 6 +++--- board/wandboard/wandboard.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'board/wandboard') diff --git a/board/wandboard/README b/board/wandboard/README index c6c01322b6..6345416b2f 100644 --- a/board/wandboard/README +++ b/board/wandboard/README @@ -9,7 +9,7 @@ SoCs: mx6 quad, mx6 dual lite and mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ -Building U-boot for Wandboard +Building U-Boot for Wandboard ----------------------------- To build U-Boot for the Wandboard: @@ -17,7 +17,7 @@ To build U-Boot for the Wandboard: $ make wandboard_config $ make -Flashing U-boot into the SD card +Flashing U-Boot into the SD card -------------------------------- - After the 'make' command completes, the generated 'SPL' binary must be @@ -36,4 +36,4 @@ as the mx6 processor) - Connect the serial cable to the host PC -- Power up the board and U-boot messages will appear in the serial console. +- Power up the board and U-Boot messages will appear in the serial console. diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index ac001edf3a..4ce74cd971 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -155,7 +155,7 @@ int board_mmc_init(bd_t *bis) /* * Following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 SOM MicroSD * mmc1 Carrier board MicroSD */ -- cgit v1.2.1