From 9993e196da707a0a1cd4584f1fcef12382c1c144 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Sat, 18 Jul 2009 18:42:13 -0500 Subject: mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCI Signed-off-by: Kim Phillips --- board/tqc/tqm834x/Makefile | 4 +- board/tqc/tqm834x/pci.c | 213 +++++++-------------------------------------- 2 files changed, 35 insertions(+), 182 deletions(-) (limited to 'board/tqc/tqm834x') diff --git a/board/tqc/tqm834x/Makefile b/board/tqc/tqm834x/Makefile index 8889726aeb..011e63136b 100644 --- a/board/tqc/tqm834x/Makefile +++ b/board/tqc/tqm834x/Makefile @@ -27,8 +27,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o pci.o +COBJS-y += $(BOARD).o +COBJS-$(CONFIG_PCI) += pci.o +COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/tqc/tqm834x/pci.c b/board/tqc/tqm834x/pci.c index 6c113e3db1..fcf4379627 100644 --- a/board/tqc/tqm834x/pci.c +++ b/board/tqc/tqm834x/pci.c @@ -1,6 +1,7 @@ /* * (C) Copyright 2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * Copyright (C) 2006-2009 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -23,45 +24,37 @@ */ #include +#include #include -#include +#include #include -#include -#if defined(CONFIG_OF_LIBFDT) -#include -#include -#endif +#include +#include DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_PCI - -/* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_tqm834x_config_table[] = { - {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_IDSEL_NUMBER, PCI_ANY_ID, - pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER - } +static struct pci_region pci1_regions[] = { + { + bus_start: CONFIG_SYS_PCI1_MEM_BASE, + phys_start: CONFIG_SYS_PCI1_MEM_PHYS, + size: CONFIG_SYS_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CONFIG_SYS_PCI1_IO_BASE, + phys_start: CONFIG_SYS_PCI1_IO_PHYS, + size: CONFIG_SYS_PCI1_IO_SIZE, + flags: PCI_REGION_IO + }, + { + bus_start: CONFIG_SYS_PCI1_MMIO_BASE, + phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, + size: CONFIG_SYS_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM }, - {} -}; -#endif - -static struct pci_controller pci1_hose = { -#ifndef CONFIG_PCI_PNP - config_table:pci_tqm834x_config_table, -#endif }; - -/************************************************************************** +/* * pci_init_board() * * NOTICE: MPC8349 internally has two PCI controllers (PCI1 and PCI2) but since @@ -76,30 +69,15 @@ static struct pci_controller pci1_hose = { void pci_init_board(void) { - volatile immap_t * immr; - volatile clk83xx_t * clk; - volatile law83xx_t * pci_law; - volatile pot83xx_t * pci_pot; - volatile pcictrl83xx_t * pci_ctrl; - volatile pciconf83xx_t * pci_conf; - u16 reg16; + volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci1_regions }; u32 reg32; - struct pci_controller * hose; - - immr = (immap_t *)CONFIG_SYS_IMMR; - clk = (clk83xx_t *)&immr->clk; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = immr->pci_ctrl; - pci_conf = immr->pci_conf; - - hose = &pci1_hose; /* * Configure PCI controller and PCI_CLK_OUTPUT - */ - - /* + * * WARNING! only PCI_CLK_OUTPUT1 is enabled here as this is the one * line actually used for clocking all external PCI devices in TQM83xx. * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for @@ -125,141 +103,14 @@ pci_init_board(void) clk->occr = reg32; udelay(2000); - /* - * Release PCI RST Output signal - */ - pci_ctrl[0].gcr = 0; - udelay(2000); - pci_ctrl[0].gcr = 1; - udelay(2000); - - /* - * Configure PCI Local Access Windows - */ + /* Configure PCI Local Access Windows */ pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M; - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI1 mem space */ - pci_pot[0].potar = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK); - - /* PCI1 IO space */ - pci_pot[1].potar = (CONFIG_SYS_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - - /* we need RAM mapped to PCI space for the devices to - * access main memory */ - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_256M; - - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* PCI memory space */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI1_MEM_BASE, - CONFIG_SYS_PCI1_MEM_PHYS, - CONFIG_SYS_PCI1_MEM_SIZE, - PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 1, - CONFIG_SYS_PCI1_IO_BASE, - CONFIG_SYS_PCI1_IO_PHYS, - CONFIG_SYS_PCI1_IO_SIZE, - PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose->regions + 2, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - CONFIG_PCI_SYS_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - hose->region_count = 3; - - pci_setup_indirect(hose, - (CONFIG_SYS_IMMR+0x8300), - (CONFIG_SYS_IMMR+0x8304)); - - pci_register_hose(hose); - - /* - * Write to Command register - */ - reg16 = 0xff; - pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND, - ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND, - reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS, - 0xffff); - pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER, - 0x80); - -#ifdef CONFIG_PCI_SCAN_SHOW - printf("PCI: Bus Dev VenId DevId Class Int\n"); -#endif - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); -} - -#if defined(CONFIG_OF_LIBFDT) -void ft_pci_setup(void *blob, bd_t *bd) -{ - int nodeoffset; - int tmp[2]; - const char *path; - - nodeoffset = fdt_path_offset(blob, "/aliases"); - if (nodeoffset >= 0) { - path = fdt_getprop(blob, nodeoffset, "pci0", NULL); - if (path) { - tmp[0] = cpu_to_be32(pci1_hose.first_busno); - tmp[1] = cpu_to_be32(pci1_hose.last_busno); - do_fixup_by_path(blob, path, "bus-range", - &tmp, sizeof(tmp), 1); - - tmp[0] = cpu_to_be32(gd->pci_clk); - do_fixup_by_path(blob, path, "clock-frequency", - &tmp, sizeof(tmp[0]), 1); - } -#ifdef CONFIG_MPC83XX_PCI2 - path = fdt_getprop(blob, nodeoffset, "pci1", NULL); - if (path) { - tmp[0] = cpu_to_be32(pci2_hose.first_busno); - tmp[1] = cpu_to_be32(pci2_hose.last_busno); - do_fixup_by_path(blob, path, "bus-range", - &tmp, sizeof(tmp), 1); + udelay(2000); - tmp[0] = cpu_to_be32(gd->pci_clk); - do_fixup_by_path(blob, path, "clock-frequency", - &tmp, sizeof(tmp[0]), 1); - } -#endif - } + mpc83xx_pci_init(1, reg, 0); } -#endif /* CONFIG_OF_LIBFDT */ -#endif /* CONFIG_PCI */ -- cgit v1.2.1