From da9971d1b3bdb554d4a4ac948119f8b2616bbcce Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 26 Jun 2015 19:42:24 +0100 Subject: Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory" This reverts commit f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a. This patch did not have a full and proper copyright/S-o-b chain. Signed-off-by: Ian Campbell Conflicts: include/configs/sun6i.h include/configs/sun8i.h --- board/sunxi/Kconfig | 12 ------------ board/sunxi/board.c | 18 ------------------ 2 files changed, 30 deletions(-) (limited to 'board/sunxi') diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index aa44f50b32..2a1cd3cf3b 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -280,18 +280,6 @@ config MMC_SUNXI_SLOT_EXTRA slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable support for this. -config SPL_NAND_SUPPORT - bool "SPL/NAND mode support" - depends on SPL - default n - ---help--- - This enables support for booting from NAND internal - memory. U-Boot SPL doesn't detect where is it load from, - therefore this option is needed to properly load image from - flash. Option also disables MMC functionality on U-Boot due to - initialization errors encountered, when both controllers are - enabled. - config USB0_VBUS_PIN string "Vbus enable pin for usb0 (otg)" default "" diff --git a/board/sunxi/board.c b/board/sunxi/board.c index f27967bbf4..ed60e74808 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -22,9 +22,6 @@ #ifdef CONFIG_AXP221_POWER #include #endif -#ifdef CONFIG_NAND_SUNXI -#include -#endif #include #include #include @@ -318,21 +315,6 @@ int board_mmc_init(bd_t *bis) } #endif -#ifdef CONFIG_NAND -void board_nand_init(void) -{ - unsigned int pin; - static u8 ports[] = CONFIG_NAND_SUNXI_GPC_PORTS; - - /* Configure AHB muxes to connect output pins with NAND controller */ - for (pin = 0; pin < 16; pin++) - sunxi_gpio_set_cfgpin(SUNXI_GPC(pin), SUNXI_GPC_NAND); - - for (pin = 0; pin < ARRAY_SIZE(ports); pin++) - sunxi_gpio_set_cfgpin(SUNXI_GPC(ports[pin]), SUNXI_GPC_NAND); -} -#endif - void i2c_init_board(void) { #ifdef CONFIG_I2C0_ENABLE -- cgit v1.2.1