From 93fc39a7c3ec5d4ed9f1b75cdbac641c3fe12369 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 19 May 2015 21:44:44 +0200 Subject: sunxi: Remove support for building "old-fashioned" fel binaries The latest versions of the fel tool support loading normal u-boot builds directly, and this is now the preferred way to use the fel boot method. This commit removes support for the old deprecated standalone fel builds. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- board/sunxi/Kconfig | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'board/sunxi') diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index a6bbf6e786..ca805e4553 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -194,24 +194,8 @@ config SYS_BOARD config SYS_SOC default "sunxi" -config SPL_FEL - bool "SPL/FEL mode support" - depends on SPL - default n - help - This enables support for Fast Early Loader (FEL) mode. This - allows U-Boot to be loaded to the board over USB by the on-chip - boot rom. U-Boot should be sent in two parts: SPL first, with - 'fel write 0x2000 u-boot-spl.bin; fel exe 0x2000' then U-Boot with - 'fel write 0x4a000000 u-boot.bin; fel exe 0x4a000000'. This option - shrinks the amount of SRAM available to SPL, so only enable it if - you need FEL. Note that enabling this option only allows FEL to be - used; it is still possible to boot U-Boot from boot media. U-Boot - SPL detects when it is being loaded using FEL. - config UART0_PORT_F bool "UART0 on MicroSD breakout board" - depends on SPL_FEL default n ---help--- Repurpose the SD card slot for getting access to the UART0 serial -- cgit v1.2.1