From 2262cfeef91458b01a1bfe3812ccbbfdf8b82807 Mon Sep 17 00:00:00 2001 From: wdenk Date: Mon, 18 Nov 2002 00:14:45 +0000 Subject: =?UTF-8?q?*=20Patch=20by=20Daniel=20Engstr=F6m,=2013=20Nov=202002?= =?UTF-8?q?:=20=20=20Add=20support=20for=20i386=20architecture=20and=20AMD?= =?UTF-8?q?=20SC520=20board?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * Patch by Pierre Aubert, 12 Nov 2002: Add support for DOS filesystem and booting from DOS floppy disk --- board/sc520_cdp/sc520_cdp.c | 288 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 288 insertions(+) create mode 100644 board/sc520_cdp/sc520_cdp.c (limited to 'board/sc520_cdp/sc520_cdp.c') diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c new file mode 100644 index 0000000000..cc818d2660 --- /dev/null +++ b/board/sc520_cdp/sc520_cdp.c @@ -0,0 +1,288 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB . + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +/* ------------------------------------------------------------------------- */ + +static void irq_init(void) +{ + + /* disable global interrupt mode */ + write_mmcr_byte(SC520_PICICR, 0x40); + + /* set irq0-7 to edge */ + write_mmcr_byte(SC520_MPICMODE, 0x00); + + /* set irq9-12 to level, all the other (8, 13-15) are edge */ + write_mmcr_byte(SC520_SL1PICMODE, 0x1e); + + /* set irq16-24 (unused slave pic2) to level */ + write_mmcr_byte(SC520_SL2PICMODE, 0xff); + + /* active low polarity on PIC interrupt pins, + active high polarity on all other irq pins */ + write_mmcr_word(SC520_INTPINPOL, 0); + + /* set irq number mapping */ + write_mmcr_byte(SC520_GPTMR0MAP,0); /* disable GP timer 0 INT */ + write_mmcr_byte(SC520_GPTMR1MAP,0); /* disable GP timer 1 INT */ + write_mmcr_byte(SC520_GPTMR2MAP,0); /* disable GP timer 2 INT */ + write_mmcr_byte(SC520_PIT0MAP,0x1); /* Set PIT timer 0 INT to IRQ0 */ + write_mmcr_byte(SC520_PIT1MAP,0); /* diable PIT timer 1 INT */ + write_mmcr_byte(SC520_PIT2MAP,0); /* diable PIT timer 2 INT */ + write_mmcr_byte(SC520_PCIINTAMAP,0x4); /* Set PCI INT A to IRQ9 */ + write_mmcr_byte(SC520_PCIINTBMAP,0x5); /* Set PCI INT B to IRQ10 */ + write_mmcr_byte(SC520_PCIINTCMAP,0x6); /* Set PCI INT C to IRQ11 */ + write_mmcr_byte(SC520_PCIINTDMAP,0x7); /* Set PCI INT D to IRQ12 */ + write_mmcr_byte(SC520_DMABCINTMAP,0); /* disable DMA INT */ + write_mmcr_byte(SC520_SSIMAP,0); /* disable Synchronius serial INT */ + write_mmcr_byte(SC520_WDTMAP,0); /* disable Watchdor INT */ + write_mmcr_byte(SC520_RTCMAP,0x3); /* Set RTC int to 8 */ + write_mmcr_byte(SC520_WPVMAP,0); /* disable write protect INT */ + write_mmcr_byte(SC520_ICEMAP,0x2); /* Set ICE Debug Serielport INT to IRQ1 */ + write_mmcr_byte(SC520_FERRMAP,0x8); /* Set FP error INT to IRQ13 */ + write_mmcr_byte(SC520_GP0IMAP,6); /* Set GPIRQ0 (ISA IRQ2) to IRQ9 */ + write_mmcr_byte(SC520_GP1IMAP,2); /* Set GPIRQ1 (SIO IRQ1) to IRQ1 */ + write_mmcr_byte(SC520_GP2IMAP,7); /* Set GPIRQ2 (ISA IRQ12) to IRQ12 */ + + if (CFG_USE_SIO_UART) { + write_mmcr_byte(SC520_UART1MAP,0); /* disable internal UART1 INT */ + write_mmcr_byte(SC520_UART2MAP,0); /* disable internal UART2 INT */ + write_mmcr_byte(SC520_GP3IMAP,11); /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */ + write_mmcr_byte(SC520_GP4IMAP,12); /* Set GPIRQ4 (ISA IRQ4) to IRQ4 */ + } else { + write_mmcr_byte(SC520_UART1MAP,12); /* Set internal UART2 INT to IRQ4 */ + write_mmcr_byte(SC520_UART2MAP,11); /* Set internal UART2 INT to IRQ3 */ + write_mmcr_byte(SC520_GP3IMAP,0); /* disable GPIRQ3 (ISA IRQ3) */ + write_mmcr_byte(SC520_GP4IMAP,0); /* disable GPIRQ4 (ISA IRQ4) */ + } + + write_mmcr_byte(SC520_GP5IMAP,13); /* Set GPIRQ5 (ISA IRQ5) to IRQ5 */ + write_mmcr_byte(SC520_GP6IMAP,21); /* Set GPIRQ6 (ISA IRQ6) to IRQ6 */ + write_mmcr_byte(SC520_GP7IMAP,22); /* Set GPIRQ7 (ISA IRQ7) to IRQ7 */ + write_mmcr_byte(SC520_GP8IMAP,3); /* Set GPIRQ8 (SIO IRQ8) to IRQ8 */ + write_mmcr_byte(SC520_GP9IMAP,4); /* Set GPIRQ9 (ISA IRQ9) to IRQ9 */ + write_mmcr_byte(SC520_GP10IMAP,9); /* Set GPIRQ10 (ISA IRQ10) to IRQ10 */ + write_mmcr_word(SC520_PCIHOSTMAP,0x11f); /* Map PCI hostbridge INT to NMI */ + write_mmcr_word(SC520_ECCMAP,0x100); /* Map SDRAM ECC failure INT to NMI */ + +} + +/* PCI stuff */ +static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +{ + char pin; + int irq; + + + pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin); + irq = pin-1; + + switch (PCI_DEV(dev)) { + case 20: + break; + case 19: + irq+=1; + break; + case 18: + irq+=2; + break; + case 17: + irq+=3; + break; + default: + return; + } + + irq&=3; /* wrap around */ + irq+=9; /* lowest IRQ is 9 */ + + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, irq); +#if 0 + printf("fixup_irq: device %d pin %c irq %d\n", + PCI_DEV(dev), 'A' + pin -1, irq); +#endif +} + +static struct pci_controller sc520_cdp_hose = { + fixup_irq: pci_sc520_cdp_fixup_irq, +}; + +void pci_init(void) +{ + pci_sc520_init(&sc520_cdp_hose); +} + + +static void silence_uart(int port) +{ + outb(0, port+1); +} + +void setup_ali_sio(int uart_primary) +{ + ali512x_init(); + + ali512x_set_fdc(ALI_ENABLED, 0x3f2, 6, 0); + ali512x_set_pp(ALI_ENABLED, 0x278, 7, 3); + ali512x_set_uart(ALI_ENABLED, ALI_UART1, uart_primary?0x3f8:0x3e8, 4); + ali512x_set_uart(ALI_ENABLED, ALI_UART2, uart_primary?0x2f8:0x2e8, 3); + ali512x_set_rtc(ALI_DISABLED, 0, 0); + ali512x_set_kbc(ALI_ENABLED, 1, 12); + ali512x_set_cio(ALI_ENABLED); + + /* IrDa pins */ + ali512x_cio_function(12, 1, 0, 0); + ali512x_cio_function(13, 1, 0, 0); + + /* SSI chip select pins */ + ali512x_cio_function(14, 0, 0, 0); /* SSI_CS */ + ali512x_cio_function(15, 0, 0, 0); /* SSI_MV */ + ali512x_cio_function(16, 0, 1, 0); /* SSI_SPI# (inverted) */ + + /* Board REV pins */ + ali512x_cio_function(20, 0, 0, 1); + ali512x_cio_function(21, 0, 0, 1); + ali512x_cio_function(22, 0, 0, 1); + ali512x_cio_function(23, 0, 0, 1); +} + + +/* set up the ISA bus timing and system address mappings */ +static void bus_init(void) +{ + + /* set up the GP IO pins */ + write_mmcr_word(SC520_PIOPFS31_16, 0xf7ff); /* set the GPIO pin function 31-16 reg */ + write_mmcr_word(SC520_PIOPFS15_0, 0xffff); /* set the GPIO pin function 15-0 reg */ + write_mmcr_byte(SC520_CSPFS, 0xf8); /* set the CS pin function reg */ + write_mmcr_byte(SC520_CLKSEL, 0x70); + + + write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ + write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */ + write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */ + write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */ + write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */ + write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */ + write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */ + + write_mmcr_word(SC520_BOOTCSCTL, 0x1823); /* set up timing of BOOTCS */ + write_mmcr_word(SC520_ROMCS1CTL, 0x1823); /* set up timing of ROMCS1 */ + write_mmcr_word(SC520_ROMCS2CTL, 0x1823); /* set up timing of ROMCS2 */ + + /* adjust the memory map: + * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM + * and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio + * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ + + + /* SRAM = GPCS3 128k @ d0000-effff*/ + write_mmcr_long(SC520_PAR2, 0x4e00400d); + + /* IDE0 = GPCS6 1f0-1f7 */ + write_mmcr_long(SC520_PAR3, 0x380801f0); + + /* IDE1 = GPCS7 3f6 */ + write_mmcr_long(SC520_PAR4, 0x3c0003f6); + /* bootcs */ + write_mmcr_long(SC520_PAR12, 0x8bffe800); + /* romcs2 */ + write_mmcr_long(SC520_PAR13, 0xcbfff000); + /* romcs1 */ + write_mmcr_long(SC520_PAR14, 0xabfff800); + /* 680 LEDS */ + write_mmcr_long(SC520_PAR15, 0x30000640); + + asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ + + if (CFG_USE_SIO_UART) { + write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | UART2_DIS|UART1_DIS); + setup_ali_sio(1); + } else { + write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS)); + setup_ali_sio(0); + silence_uart(0x3e8); + silence_uart(0x2e8); + } + +} + + + +/* + * Miscelaneous platform dependent initialisations + */ + +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + init_sc520(); + bus_init(); + irq_init(); + + /* max drive current on SDRAM */ + write_mmcr_word(SC520_DSCTL, 0x0100); + + /* enter debug mode after next reset (only if jumper is also set) */ + write_mmcr_byte(SC520_RESCFG, 0x08); + + /* configure the software timer to 33.333MHz */ + write_mmcr_byte(SC520_SWTMRCFG, 0); + gd->bus_clk = 33333000; + + return 0; +} + +int dram_init(void) +{ + init_sc520_dram(); + return 0; +} + +void show_boot_progress(int val) +{ + outb(val&0xff, 0x80); + outb((val&0xff00)>>8, 0x680); +} + + +int last_stage_init(void) +{ + int minor; + int major; + + major = minor = 0; + major |= ali512x_cio_in(23)?2:0; + major |= ali512x_cio_in(22)?1:0; + minor |= ali512x_cio_in(21)?2:0; + minor |= ali512x_cio_in(20)?1:0; + + printf("AMD SC520 CDP revision %d.%d\n", major, minor); +} -- cgit v1.2.1