From 81f98bbd62b66e4a590fe6fe9b0d8231e45beffd Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 8 Nov 2013 11:18:57 +0000 Subject: malta: setup PIIX4 interrupt route Without setting up the PIRQ[A:D] interrupt routes, PCI interrupts will be left disabled. Linux does not set up this routing but relies upon it having been set up by the bootloader, reading back the IRQ lines which the PIRQ[A:D] signals have been routed to. This patch routes PIRQA & PIRQB to IRQ 10, and PIRQC & PIRQD to IRQ 11. This matches the setup used by YAMON. Signed-off-by: Paul Burton --- board/imgtec/malta/malta.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'board/imgtec/malta/malta.c') diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c index 2f92259756..a1a4c01866 100644 --- a/board/imgtec/malta/malta.c +++ b/board/imgtec/malta/malta.c @@ -7,6 +7,7 @@ #include #include +#include #include #include #include @@ -169,6 +170,8 @@ struct serial_device *default_serial_console(void) void pci_init_board(void) { + pci_dev_t bdf; + switch (malta_sys_con()) { case SYSCON_GT64120: set_io_port_base(CKSEG1ADDR(MALTA_GT_PCIIO_BASE)); @@ -191,4 +194,15 @@ void pci_init_board(void) 0x00000000, MALTA_MSC01_PCIIO_SIZE); break; } + + bdf = pci_find_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_0, 0); + if (bdf == -1) + panic("Failed to find PIIX4 PCI bridge\n"); + + /* setup PCI interrupt routing */ + pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCA, 10); + pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCB, 10); + pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCC, 11); + pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCD, 11); } -- cgit v1.2.1