From f353518ffb026af0ac259ae508edd9994f30d51b Mon Sep 17 00:00:00 2001
From: Helmut Raiger <helmut.raiger@hale.at>
Date: Wed, 18 Jan 2012 21:27:13 +0000
Subject: tt01: add MMC support

board_mmc_init() initializes the pins of SDHC1 and
turns on V_MMC1 of the PMIC. Config adds support for EXT2
and FAT.

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
---
 board/hale/tt01/tt01.c | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

(limited to 'board/hale/tt01/tt01.c')

diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c
index 2995c8f105..ed3fa6ef9a 100644
--- a/board/hale/tt01/tt01.c
+++ b/board/hale/tt01/tt01.c
@@ -26,6 +26,8 @@
 #include <netdev.h>
 #include <command.h>
 #include <pmic.h>
+#include <fsl_pmic.h>
+#include <mc13783.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
@@ -175,8 +177,6 @@ int board_init(void)
 
 int board_late_init(void)
 {
-	pmic_init();
-
 #ifdef CONFIG_HW_WATCHDOG
 	mxc_hw_watchdog_enable();
 #endif
@@ -190,6 +190,36 @@ int checkboard(void)
 	return 0;
 }
 
+#ifdef CONFIG_MXC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	u32 val;
+	struct pmic *p;
+
+	/*
+	* this is the first driver to use the pmic, so call
+	* pmic_init() here. board_late_init() is too late for
+	* the MMC driver.
+	*/
+	pmic_init();
+	p = get_pmic();
+
+	/* configure pins for SDHC1 only */
+	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC));
+	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CMD, MUX_CTL_FUNC));
+	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA0, MUX_CTL_FUNC));
+	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA1, MUX_CTL_FUNC));
+	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA2, MUX_CTL_FUNC));
+	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA3, MUX_CTL_FUNC));
+
+	/* turn on power V_MMC1 */
+	if (pmic_reg_read(p, REG_MODE_1, &val) < 0)
+		pmic_reg_write(p, REG_MODE_1, val | VMMC1EN);
+
+	return mxc_mmc_init(bis);
+}
+#endif
+
 int board_eth_init(bd_t *bis)
 {
 	int rc = 0;
-- 
cgit v1.2.1