From f17a9af84645f5b820da2e7d017b014923ce1b88 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 24 May 2016 11:03:55 -0700 Subject: imx: ventana: enable pwm device-tree property based on hwconfig Most Ventana boards have a connector with off-board digital-I/O signals including some that can be pinmuxed as either a PWM or a GPIO. The hwconfig env variable is used to configure these and they will be pinmuxed according to this configuration in the bootloader. This patch adds a device-tree fixup that will enable the pwm controller nodes appropriately for digital-I/O's that are configured as pwm via hwconfig so that the pin can be used with the Linux kernel /sys/class/pwm API. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'board/gateworks/gw_ventana/gw_ventana.c') diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 7a3d96a039..feb2df8fa1 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -777,6 +778,16 @@ static int ft_sethdmiinfmt(void *blob, char *mode) return 0; } +/* enable a property of a node if the node is found */ +static inline void ft_enable_path(void *blob, const char *path) +{ + int i = fdt_path_offset(blob, path); + if (i >= 0) { + debug("enabling %s\n", path); + fdt_status_okay(blob, i); + } +} + /* * called prior to booting kernel or by 'fdt boardsetup' command * @@ -920,6 +931,25 @@ int ft_board_setup(void *blob, bd_t *bd) ft_sethdmiinfmt(blob, "yuv422bt656"); } + /* Configure DIO */ + for (i = 0; i < gpio_cfg[board_type].num_gpios; i++) { + struct dio_cfg *cfg = &gpio_cfg[board_type].dio_cfg[i]; + char arg[10]; + + sprintf(arg, "dio%d", i); + if (!hwconfig(arg)) + continue; + if (hwconfig_subarg_cmp(arg, "mode", "pwm") && cfg->pwm_param) + { + char path[48]; + sprintf(path, "/soc/aips-bus@02000000/pwm@%08x", + 0x02080000 + (0x4000 * (cfg->pwm_param - 1))); + printf(" Enabling pwm%d for DIO%d\n", + cfg->pwm_param, i); + ft_enable_path(blob, path); + } + } + /* * Peripheral Config: * remove nodes by alias path if EEPROM config tells us the -- cgit v1.2.1