From 058d7dc7ba28a45ae6bb7f6ef12b978b31584406 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 16 Dec 2010 14:28:06 -0600 Subject: powerpc/85xx: Cleanup SGMII detection and reporting Use new is_serdes_configured to determine if TSECs are in SGMII mode and report that on the various boards that use or can be configured in SGMII mode in board_eth_init() instead of in the PCI init code. Signed-off-by: Kumar Gala --- board/freescale/mpc8572ds/mpc8572ds.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) (limited to 'board/freescale/mpc8572ds') diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 15a4d316cc..c217c278ea 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -177,15 +177,6 @@ void pci_init_board(void) debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) - printf("eTSEC1 is in sgmii mode.\n"); - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) - printf("eTSEC2 is in sgmii mode.\n"); - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) - printf("eTSEC3 is in sgmii mode.\n"); - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) - printf("eTSEC4 is in sgmii mode.\n"); - puts("\n"); #ifdef CONFIG_PCIE3 pcie_configured = is_serdes_configured(PCIE3); @@ -289,31 +280,38 @@ int board_early_init_r(void) int board_eth_init(bd_t *bis) { struct tsec_info_struct tsec_info[4]; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int num = 0; #ifdef CONFIG_TSEC1 SET_STD_TSEC_INFO(tsec_info[num], 1); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + if (is_serdes_configured(SGMII_TSEC1)) { + puts("eTSEC1 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif #ifdef CONFIG_TSEC2 SET_STD_TSEC_INFO(tsec_info[num], 2); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + if (is_serdes_configured(SGMII_TSEC2)) { + puts("eTSEC2 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif #ifdef CONFIG_TSEC3 SET_STD_TSEC_INFO(tsec_info[num], 3); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + if (is_serdes_configured(SGMII_TSEC3)) { + puts("eTSEC3 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif #ifdef CONFIG_TSEC4 SET_STD_TSEC_INFO(tsec_info[num], 4); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) + if (is_serdes_configured(SGMII_TSEC4)) { + puts("eTSEC4 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif -- cgit v1.2.1