From a562e1bd9d8e10ea2e51d08e66d35a6e1795153b Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 9 Jan 2005 18:21:42 +0000 Subject: Patch by Florian Schlote, 08 Sep 2004: Add support for SenTec-COBRA5272-board (Coldfire). --- board/cobra5272/flash.c | 378 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 378 insertions(+) create mode 100644 board/cobra5272/flash.c (limited to 'board/cobra5272/flash.c') diff --git a/board/cobra5272/flash.c b/board/cobra5272/flash.c new file mode 100644 index 0000000000..6f5874a671 --- /dev/null +++ b/board/cobra5272/flash.c @@ -0,0 +1,378 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#define PHYS_FLASH_1 CFG_FLASH_BASE +#define FLASH_BANK_SIZE 0x200000 + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +void flash_print_info (flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (AMD_MANUFACT & FLASH_VENDMASK): + printf ("AMD: "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case (AMD_ID_PL160CB & FLASH_TYPEMASK): + printf ("AM29PL160CB (16Mbit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + goto Done; + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); + } + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + +Done: +} + + +unsigned long flash_init (void) +{ + int i, j; + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + + flash_info[i].flash_id = + (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_PL160CB & FLASH_TYPEMASK); + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + if (i == 0) + flashbase = PHYS_FLASH_1; + else + panic ("configured to many flash banks!\n"); + + for (j = 0; j < flash_info[i].sector_count; j++) { + if (j == 0) { + /* 1st is 16 KiB */ + flash_info[i].start[j] = flashbase; + } + if ((j >= 1) && (j <= 2)) { + /* 2nd and 3rd are 8 KiB */ + flash_info[i].start[j] = + flashbase + 0x4000 + 0x2000 * (j - 1); + } + if (j == 3) { + /* 4th is 224 KiB */ + flash_info[i].start[j] = flashbase + 0x8000; + } + if ((j >= 4) && (j <= 10)) { + /* rest is 256 KiB */ + flash_info[i].start[j] = + flashbase + 0x40000 + 0x40000 * (j - + 4); + } + } + size += flash_info[i].size; + } + + flash_protect (FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + 0x3ffff, &flash_info[0]); + + return size; +} + + +#define CMD_READ_ARRAY 0x00F0 +#define CMD_UNLOCK1 0x00AA +#define CMD_UNLOCK2 0x0055 +#define CMD_ERASE_SETUP 0x0080 +#define CMD_ERASE_CONFIRM 0x0030 +#define CMD_PROGRAM 0x00A0 +#define CMD_UNLOCK_BYPASS 0x0020 + +#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555<<1))) +#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA<<1))) + +#define BIT_ERASE_DONE 0x0080 +#define BIT_RDY_MASK 0x0080 +#define BIT_PROGRAM_ERROR 0x0020 +#define BIT_TIMEOUT 0x80000000 /* our flag */ + +#define READY 1 +#define ERR 2 +#define TMO 4 + + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + ulong result; + int iflag, cflag, prot, sect; + int rc = ERR_OK; + int chip1; + + /* first look for protection bits */ + + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; + + if ((s_first < 0) || (s_first > s_last)) { + return ERR_INVAL; + } + + if ((info->flash_id & FLASH_VENDMASK) != + (AMD_MANUFACT & FLASH_VENDMASK)) { + return ERR_UNKNOWN_FLASH_VENDOR; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) + return ERR_PROTECTED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + printf ("\n"); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + set_timer (0); + + if (info->protect[sect] == 0) { /* not protected */ + volatile u16 *addr = + (volatile u16 *) (info->start[sect]); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + *addr = CMD_ERASE_CONFIRM; + + /* wait until flash is ready */ + chip1 = 0; + + do { + result = *addr; + + /* check timeout */ + if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + chip1 = TMO; + break; + } + + if (!chip1 + && (result & 0xFFFF) & BIT_ERASE_DONE) + chip1 = READY; + + } while (!chip1); + + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + + if (chip1 == ERR) { + rc = ERR_PROG_ERROR; + goto outahere; + } + if (chip1 == TMO) { + rc = ERR_TIMOUT; + goto outahere; + } + + printf ("ok.\n"); + } else { /* it was protected */ + + printf ("protected!\n"); + } + } + + if (ctrlc ()) + printf ("User Interrupt!\n"); + + outahere: + /* allow flash to settle - wait 10 ms */ + udelay (10000); + + if (iflag) + enable_interrupts (); + + if (cflag) + icache_enable (); + + return rc; +} + + +volatile static int write_word (flash_info_t * info, ulong dest, ulong data) +{ + volatile u16 *addr = (volatile u16 *) dest; + ulong result; + int rc = ERR_OK; + int cflag, iflag; + int chip1; + + /* + * Check if Flash is (sufficiently) erased + */ + result = *addr; + if ((result & data) != data) + return ERR_NOT_ERASED; + + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_PROGRAM; + *addr = data; + + /* arm simple, non interrupt dependent timer */ + set_timer (0); + + /* wait until flash is ready */ + chip1 = 0; + do { + result = *addr; + + /* check timeout */ + if (get_timer (0) > CFG_FLASH_ERASE_TOUT) { + chip1 = ERR | TMO; + break; + } + if (!chip1 && ((result & 0x80) == (data & 0x80))) + chip1 = READY; + + } while (!chip1); + + *addr = CMD_READ_ARRAY; + + if (chip1 == ERR || *addr != data) + rc = ERR_PROG_ERROR; + + if (iflag) + enable_interrupts (); + + if (cflag) + icache_enable (); + + return rc; +} + + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong wp, data; + int rc; + + if (addr & 1) { + printf ("unaligned destination not supported\n"); + return ERR_ALIGN; + } + +#if 0 + if (cnt & 1) { + printf ("odd transfer sizes not supported\n"); + return ERR_ALIGN; + } +#endif + + wp = addr; + + if (addr & 1) { + data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *) + src); + if ((rc = write_word (info, wp - 1, data)) != 0) { + return (rc); + } + src += 1; + wp += 1; + cnt -= 1; + } + + while (cnt >= 2) { + data = *((volatile u16 *) src); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 2; + wp += 2; + cnt -= 2; + } + + if (cnt == 1) { + data = (*((volatile u8 *) src) << 8) | + *((volatile u8 *) (wp + 1)); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 1; + wp += 1; + cnt -= 1; + } + + return ERR_OK; +} -- cgit v1.2.1