From 354bc6feac2cf549c51c2f36e2a374438af4e9c1 Mon Sep 17 00:00:00 2001 From: wdenk Date: Mon, 26 Aug 2002 21:53:16 +0000 Subject: Initial revision --- board/c2mon/c2mon.c | 266 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 266 insertions(+) create mode 100644 board/c2mon/c2mon.c (limited to 'board/c2mon') diff --git a/board/c2mon/c2mon.c b/board/c2mon/c2mon.c new file mode 100644 index 0000000000..171d06eba0 --- /dev/null +++ b/board/c2mon/c2mon.c @@ -0,0 +1,266 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* ------------------------------------------------------------------------- */ + +static long int dram_size (long int, long int *, long int); + +/* ------------------------------------------------------------------------- */ + +#define _NOT_USED_ 0xFFFFFFFF + +const uint sdram_table[] = +{ + /* + * Single Read. (Offset 0 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00, + 0x1FF77C47, /* last */ + /* + * SDRAM Initialization (offset 5 in UPMA RAM) + * + * This is no UPM entry point. The following definition uses + * the remaining space to establish an initialization + * sequence, which is executed by a RUN command. + * + */ + 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */ + /* + * Burst Read. (Offset 8 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00, + 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Single Write. (Offset 18 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Burst Write. (Offset 20 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00, + 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */ + _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Refresh (Offset 30 in UPMA RAM) + */ + 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC84, 0xFFFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* + * Exception. (Offset 3c in UPMA RAM) + */ + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, +}; + +/* ------------------------------------------------------------------------- */ + + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + unsigned char *s = getenv ("serial#"); + + puts ("Board: TTTech C2MON "); + + for (; s && *s; ++s) { + if (*s == ' ') + break; + putc (*s); + } + + putc ('\n'); + + return (0); +} + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + unsigned long reg; + long int size8, size9; + long int size = 0; + + upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table) / sizeof(uint)); + + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR_2BK_8K; + + memctl->memc_mar = 0x00000088; + + /* + * Map controller bank 2 the SDRAM bank 2 at physical address 0. + */ + memctl->memc_or2 = CFG_OR2_PRELIM; + memctl->memc_br2 = CFG_BR2_PRELIM; + + memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + + udelay (200); + + /* perform SDRAM initializsation sequence */ + + memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ + udelay (1); + memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */ + udelay (1); + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + + udelay (1000); + + /* + * Check Bank 0 Memory Size + * + * try 8 column mode + */ + size8 = dram_size (CFG_MAMR_8COL, + (ulong *)SDRAM_BASE2_PRELIM, + SDRAM_MAX_SIZE); + + udelay (1000); + + /* + * try 9 column mode + */ + size9 = dram_size (CFG_MAMR_9COL, + (ulong *) SDRAM_BASE2_PRELIM, + SDRAM_MAX_SIZE); + + if (size8 < size9) { /* leave configuration at 9 columns */ + size = size9; +/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ + } else { /* back to 8 columns */ + size = size8; + memctl->memc_mamr = CFG_MAMR_8COL; + udelay (500); +/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ + } + + udelay (1000); + + /* + * Adjust refresh rate depending on SDRAM type + * For types > 128 MBit leave it at the current (fast) rate + */ + if (size < 0x02000000) { + /* reduce to 15.6 us (62.4 us / quad) */ + memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + udelay (1000); + } + + /* + * Final mapping + */ + memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + + /* + * No bank 1 + * + * invalidate bank + */ + memctl->memc_br3 = 0; + + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + + udelay (10000); + + return (size); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ + +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + volatile long int *addr; + ulong cnt, val; + ulong save[32]; /* to make test non-destructive */ + unsigned char i = 0; + + memctl->memc_mamr = mamr_value; + + for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + + save[i++] = *addr; + *addr = ~cnt; + } + + /* write 0 to base address */ + addr = base; + save[i] = *addr; + *addr = 0; + + /* check at base address */ + if ((val = *addr) != 0) { + *addr = save[i]; + return (0); + } + + for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + val = *addr; + *addr = save[--i]; + + if (val != (~cnt)) { + return (cnt * sizeof (long)); + } + } + return (maxsize); +} -- cgit v1.2.1