From d6ed3222229974682799bd2083f2ceeac6f912b1 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sat, 11 May 2013 03:00:50 +0000 Subject: Power: remove support for Freescale MPC8220 The Freescale MPC8220 Power Architecture processors have long reached EOL; Freescale does not even list these any more on their web site. Remove the code to avoid wasting maitaining efforts on dead stuff. Signed-off-by: Wolfgang Denk Cc: Andy Fleming --- board/alaska/flash.c | 945 --------------------------------------------------- 1 file changed, 945 deletions(-) delete mode 100644 board/alaska/flash.c (limited to 'board/alaska/flash.c') diff --git a/board/alaska/flash.c b/board/alaska/flash.c deleted file mode 100644 index 977822ac51..0000000000 --- a/board/alaska/flash.c +++ /dev/null @@ -1,945 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#define FLASH_PORT_WIDTH8 - -typedef unsigned char FLASH_PORT_WIDTH; -typedef volatile unsigned char FLASH_PORT_WIDTHV; - -#define SWAP(x) (x) - -/* Intel-compatible flash ID */ -#define INTEL_COMPAT 0x89 -#define INTEL_ALT 0xB0 - -/* Intel-compatible flash commands */ -#define INTEL_PROGRAM 0x10 -#define INTEL_ERASE 0x20 -#define INTEL_CLEAR 0x50 -#define INTEL_LOCKBIT 0x60 -#define INTEL_PROTECT 0x01 -#define INTEL_STATUS 0x70 -#define INTEL_READID 0x90 -#define INTEL_CONFIRM 0xD0 -#define INTEL_RESET 0xFF - -/* Intel-compatible flash status bits */ -#define INTEL_FINISHED 0x80 -#define INTEL_OK 0x80 - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define FLASH_CYCLE1 0x0555 -#define FLASH_CYCLE2 0x02aa - -#define WR_BLOCK 0x20 -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, FPW data); -static int write_data_block (flash_info_t * info, ulong src, ulong dest); -static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); -static void flash_sync_real_protect (flash_info_t * info); -static unsigned char intel_sector_protected (flash_info_t *info, ushort sector); -static unsigned char same_chip_banks (int bank1, int bank2); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - ulong fsize = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - memset (&flash_info[i], 0, sizeof (flash_info_t)); - - switch (i) { - case 0: - flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE, - &flash_info[i]); - flash_get_offsets (CONFIG_SYS_FLASH1_BASE, &flash_info[i]); - break; - case 1: - flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE, - &flash_info[i]); - fsize = CONFIG_SYS_FLASH1_BASE + flash_info[i - 1].size; - flash_get_offsets (fsize, &flash_info[i]); - break; - case 2: - flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE, - &flash_info[i]); - flash_get_offsets (CONFIG_SYS_FLASH0_BASE, &flash_info[i]); - break; - case 3: - flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE, - &flash_info[i]); - fsize = CONFIG_SYS_FLASH0_BASE + flash_info[i - 1].size; - flash_get_offsets (fsize, &flash_info[i]); - break; - default: - panic ("configured to many flash banks!\n"); - break; - } - size += flash_info[i].size; - - /* get the h/w and s/w protection status in sync */ - flash_sync_real_protect(&flash_info[i]); - } - - /* Protect monitor and environment sectors - */ -#if defined (CONFIG_SYS_AMD_BOOT) - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[2]); - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_INTEL_BASE, - CONFIG_SYS_INTEL_BASE + monitor_flash_len - 1, - &flash_info[1]); -#else - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[3]); - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_AMD_BASE, - CONFIG_SYS_AMD_BASE + monitor_flash_len - 1, &flash_info[0]); -#endif - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV1_ADDR, - CONFIG_ENV1_ADDR + CONFIG_ENV1_SIZE - 1, &flash_info[1]); - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[3]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) - return; - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_AMD_SECT_SIZE); - info->protect[i] = 0; - } - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_INTEL_SECT_SIZE); - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - case FLASH_MAN_AMD: - printf ("AMD "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - - case FLASH_AM040: - printf ("AMD29F040B\n"); - break; - - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info) -{ - FPWV value; - static int amd = 0; - - /* Write auto select command: read Manufacturer ID */ - /* Write auto select command sequence and test FLASH answer */ - addr[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */ - __asm__ ("sync"); - addr[FLASH_CYCLE2] = (FPW) 0x00550055; /* for AMD, Intel ignores this */ - __asm__ ("sync"); - addr[FLASH_CYCLE1] = (FPW) 0x00900090; /* selects Intel or AMD */ - __asm__ ("sync"); - - udelay (100); - - switch (addr[0] & 0xff) { - - case (uchar) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - value = addr[1]; - break; - - case (uchar) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - value = addr[2]; - break; - - default: - printf ("unknown\n"); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - switch (value) { - - case (FPW) INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 64; - info->size = 0x00800000; /* => 16 MB */ - break; - - case (FPW) AMD_ID_LV040B: - info->flash_id += FLASH_AM040; - if (amd == 0) { - info->sector_count = 7; - info->size = 0x00070000; /* => 448 KB */ - amd = 1; - } else { - /* for Environment settings */ - info->sector_count = 1; - info->size = PHYS_AMD_SECT_SIZE; /* => 64 KB */ - amd = 0; - } - break; - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - if (value == (FPW) INTEL_ID_28F128J3A) - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - else - addr[0] = (FPW) 0x00F000F0; /* restore read mode */ - - return (info->size); -} - - -/* - * This function gets the u-boot flash sector protection status - * (flash_info_t.protect[]) in sync with the sector protection - * status stored in hardware. - */ -static void flash_sync_real_protect (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - for (i = 0; i < info->sector_count; ++i) { - info->protect[i] = intel_sector_protected(info, i); - } - break; - case FLASH_AM040: - default: - /* no h/w protect support */ - break; - } -} - - -/* - * checks if "sector" in bank "info" is protected. Should work on intel - * strata flash chips 28FxxxJ3x in 8-bit mode. - * Returns 1 if sector is protected (or timed-out while trying to read - * protection status), 0 if it is not. - */ -static unsigned char intel_sector_protected (flash_info_t *info, ushort sector) -{ - FPWV *addr; - FPWV *lock_conf_addr; - ulong start; - unsigned char ret; - - /* - * first, wait for the WSM to be finished. The rationale for - * waiting for the WSM to become idle for at most - * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy - * because of: (1) erase, (2) program or (3) lock bit - * configuration. So we just wait for the longest timeout of - * the (1)-(3), i.e. the erase timeout. - */ - - /* wait at least 35ns (W12) before issuing Read Status Register */ - udelay(1); - addr = (FPWV *) info->start[sector]; - *addr = (FPW) INTEL_STATUS; - - start = get_timer (0); - while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = (FPW) INTEL_RESET; /* restore read mode */ - printf("WSM busy too long, can't get prot status\n"); - return 1; - } - } - - /* issue the Read Identifier Codes command */ - *addr = (FPW) INTEL_READID; - - /* wait at least 35ns (W12) before reading */ - udelay(1); - - /* Intel example code uses offset of 4 for 8-bit flash */ - lock_conf_addr = (FPWV *) info->start[sector] + 4; - ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0; - - /* put flash back in read mode */ - *addr = (FPW) INTEL_RESET; - - return ret; -} - - -/* - * Checks if "bank1" and "bank2" are on the same chip. Returns 1 if they - * are and 0 otherwise. - */ -static unsigned char same_chip_banks (int bank1, int bank2) -{ - unsigned char same_chip[CONFIG_SYS_MAX_FLASH_BANKS][CONFIG_SYS_MAX_FLASH_BANKS] = { - {1, 1, 0, 0}, - {1, 1, 0, 0}, - {0, 0, 1, 1}, - {0, 0, 1, 1} - }; - return same_chip[bank1][bank2]; -} - - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start; - int rcode = 0, intel = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf ("- missing\n"); - else - printf ("- no sectors to erase\n"); - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_AMD)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - } - - if (type == FLASH_MAN_INTEL) - intel = 1; - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", prot); - } else { - printf ("\n"); - } - - start = get_timer (0); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer (0); - - if (intel) { - *addr = (FPW) 0x00500050; /* clear status register */ - *addr = (FPW) 0x00200020; /* erase setup */ - *addr = (FPW) 0x00D000D0; /* erase confirm */ - } else { - FPWV *base; /* first address in bank */ - - base = (FPWV *) (CONFIG_SYS_AMD_BASE); - base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW) 0x00800080; /* erase mode */ - base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */ - *addr = (FPW) 0x00300030; /* erase sector */ - } - - while (((status = - *addr) & (FPW) 0x00800080) != - (FPW) 0x00800080) { - if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - if (intel) { - *addr = (FPW) 0x00B000B0; /* suspend erase */ - *addr = (FPW) 0x00FF00FF; /* reset to read mode */ - } else - *addr = (FPW) 0x00F000F0; /* reset to read mode */ - - rcode = 1; - break; - } - } - - if (intel) { - *addr = (FPW) 0x00500050; /* clear status register cmd. */ - *addr = (FPW) 0x00FF00FF; /* resest to read mode */ - } else - *addr = (FPW) 0x00F000F0; /* reset to read mode */ - - printf (" done\n"); - } - } - if (flag) - enable_interrupts(); - - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - { - FPW data = 0; /* 16 or 32 bit word, matches flash bus width */ - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; - - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof (data), left -= - sizeof (data) - bytes) { - - bytes = addr & (sizeof (data) - 1); - addr &= ~(sizeof (data) - 1); - - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof (data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left) - data += *((uchar *) addr + i); - else - data += *src++; - } - - res = write_word_amd (info, (FPWV *) addr, - data); - } - return res; - } /* case FLASH_MAN_AMD */ - - case FLASH_MAN_INTEL: - { - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - /* get lower word aligned address */ - wp = addr; - port_width = 1; - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - - for (; cnt == 0 && i < port_width; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - if ((rc = - write_data (info, wp, SWAP (data))) != 0) - return (rc); - wp += port_width; - } - - if (cnt > WR_BLOCK) { - /* - * handle word aligned part - */ - count = 0; - while (cnt >= WR_BLOCK) { - - if ((rc = - write_data_block (info, - (ulong) src, - wp)) != 0) - return (rc); - - wp += WR_BLOCK; - src += WR_BLOCK; - cnt -= WR_BLOCK; - - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - } - - if (cnt < WR_BLOCK) { - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) - data = (data << 8) | *src++; - - if ((rc = - write_data (info, wp, - SWAP (data))) != 0) - return (rc); - - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - } - - if (cnt == 0) - return (0); - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; - ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - - for (; i < port_width; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - return (write_data (info, wp, SWAP (data))); - } /* case FLASH_MAN_INTEL */ - - } /* switch */ - return (0); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong start; - int flag, rc = 0; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong)addr, (ulong)*addr); - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer (0); - - /* wait while polling the status register */ - while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = 1; - goto OUT; - } - } - -OUT: - *addr = (FPW)0x00FF00FF; /* restore read mode */ - - if (flag) - enable_interrupts(); - - return rc; -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data_block (flash_info_t * info, ulong src, ulong dest) -{ - FPWV *srcaddr = (FPWV *) src; - FPWV *dstaddr = (FPWV *) dest; - ulong start; - int flag, i, rc = 0; - - /* Check if Flash is (sufficiently) erased */ - for (i = 0; i < WR_BLOCK; i++) - if ((*dstaddr++ & 0xff) != 0xff) { - printf ("not erased at %08lx (%lx)\n", - (ulong)dstaddr, (ulong)*dstaddr); - return (2); - } - - dstaddr = (FPWV *) dest; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - *dstaddr = (FPW) 0x00e800e8; /* write block setup */ - - /* arm simple, non interrupt dependent timer */ - start = get_timer (0); - - /* wait while polling the status register */ - while ((*dstaddr & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = 1; - goto OUT; - } - } - - *dstaddr = (FPW) 0x001f001f; /* write 32 to buffer */ - for (i = 0; i < WR_BLOCK; i++) - *dstaddr++ = *srcaddr++; - - dstaddr -= 1; - *dstaddr = (FPW) 0x00d000d0; /* write 32 to buffer */ - - /* arm simple, non interrupt dependent timer */ - start = get_timer (0); - - /* wait while polling the status register */ - while ((*dstaddr & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dstaddr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); - } - } - -OUT: - *dstaddr = (FPW)0x00FF00FF; /* restore read mode */ - if (flag) - enable_interrupts(); - - return rc; -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for AMD FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - FPWV *base; /* first address in flash bank */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - base = (FPWV *) (CONFIG_SYS_AMD_BASE); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW) 0x00A000A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - start = get_timer (0); - - /* data polling for D7 */ - while (res == 0 - && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW) 0x00F000F0; /* reset bank */ - res = 1; - } - } - - return (res); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} - -/*----------------------------------------------------------------------- - * Set/Clear sector's lock bit, returns: - * 0 - OK - * 1 - Error (timeout, voltage problems, etc.) - */ -int flash_real_protect (flash_info_t * info, long sector, int prot) -{ - ulong start; - int i, j; - int curr_bank; - int bank; - int rc = 0; - FPWV *addr = (FPWV *) (info->start[sector]); - int flag = disable_interrupts (); - - /* - * 29F040B AMD flash does not support software protection/unprotection, - * the only way to protect the AMD flash is marked it as prot bit. - * This flash only support hardware protection, by supply or not supply - * 12vpp to the flash - */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) { - info->protect[sector] = prot; - - return 0; - } - - *addr = INTEL_CLEAR; /* Clear status register */ - if (prot) { /* Set sector lock bit */ - *addr = INTEL_LOCKBIT; /* Sector lock bit */ - *addr = INTEL_PROTECT; /* set */ - } else { /* Clear sector lock bit */ - *addr = INTEL_LOCKBIT; /* All sectors lock bits */ - *addr = INTEL_CONFIRM; /* clear */ - } - - start = get_timer (0); - - while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer (start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { - printf ("Flash lock bit operation timed out\n"); - rc = 1; - break; - } - } - - if (*addr != INTEL_OK) { - printf ("Flash lock bit operation failed at %08X, CSR=%08X\n", - (uint) addr, (uint) * addr); - rc = 1; - } - - if (!rc) - info->protect[sector] = prot; - - /* - * Clear lock bit command clears all sectors lock bits, so - * we have to restore lock bits of protected sectors. - */ - if (!prot) { - /* - * re-locking must be done for all banks that belong on one - * FLASH chip, as all the sectors on the chip were unlocked - * by INTEL_LOCKBIT/INTEL_CONFIRM commands. (let's hope - * that banks never span chips, in particular chips which - * support h/w protection differently). - */ - - /* find the current bank number */ - curr_bank = CONFIG_SYS_MAX_FLASH_BANKS + 1; - for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; ++j) { - if (&flash_info[j] == info) { - curr_bank = j; - } - } - if (curr_bank == CONFIG_SYS_MAX_FLASH_BANKS + 1) { - printf("Error: can't determine bank number!\n"); - } - - for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { - if (!same_chip_banks(curr_bank, bank)) { - continue; - } - info = &flash_info[bank]; - for (i = 0; i < info->sector_count; i++) { - if (info->protect[i]) { - start = get_timer (0); - addr = (FPWV *) (info->start[i]); - *addr = INTEL_LOCKBIT; /* Sector lock bit */ - *addr = INTEL_PROTECT; /* set */ - while ((*addr & INTEL_FINISHED) != - INTEL_FINISHED) { - if (get_timer (start) > - CONFIG_SYS_FLASH_UNLOCK_TOUT) { - printf ("Flash lock bit operation timed out\n"); - rc = 1; - break; - } - } - } - } - } - - /* - * get the s/w sector protection status in sync with the h/w, - * in case something went wrong during the re-locking. - */ - flash_sync_real_protect(info); /* resets flash to read mode */ - } - - if (flag) - enable_interrupts (); - - *addr = INTEL_RESET; /* Reset to read array mode */ - - return rc; -} -- cgit v1.2.1