From 4dd834906dcc8207f82a686e060ffaa7b7ac878f Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 1 Nov 2011 20:00:35 +0000 Subject: arm, davinci: add cam_enc_4xx support - DM368 SOC - booting with spl not with UBL from TI - before loading u-boot from NAND into RAM, test the RAM with the post memory test. If error is found, switch all LEDs on and halt system. - SPI Flash Dataflash Typ: M25PE80 - Ethernet DM9161BI - MMC - USB Signed-off-by: Heiko Schocher Cc: Sandeep Paulraj Cc: Albert ARIBAUD Cc: Igor Grinberg Signed-off-by: Sandeep Paulraj --- board/ait/cam_enc_4xx/config.mk | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 board/ait/cam_enc_4xx/config.mk (limited to 'board/ait/cam_enc_4xx/config.mk') diff --git a/board/ait/cam_enc_4xx/config.mk b/board/ait/cam_enc_4xx/config.mk new file mode 100644 index 0000000000..b1f9b6c221 --- /dev/null +++ b/board/ait/cam_enc_4xx/config.mk @@ -0,0 +1,15 @@ +# +# AIT cam_enc_4xx board +# cam_enc_4xx board has 1 bank of 256 MB DDR RAM +# Physical Address: 8000'0000 to 9000'0000 +# +# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +PAD_TO := 12320 +UBL_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/ublimage.cfg +ifndef CONFIG_SPL_BUILD +ALL-y += $(obj)u-boot.ubl +endif -- cgit v1.2.1