From dd8204de157e10c080aa2cdc0f24bcb2e4ac73dd Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 26 Jan 2016 10:59:42 -0700 Subject: ARM: tegra: shut down USB device controller at boot When loading U-Boot into RAM over USB protocols using tools such as tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device mode controller is initialized and enumerated by the host PC running the tool. Unfortunately, these tools do not shut down the USB controller before executing the downloaded code, and so the host PC does not "de-enumerate" the USB device. This patch implements optional code to shut down the USB controller when U-Boot boots to avoid leaving a stale USB device present. Signed-off-by: Stephen Warren Reviewed-by: Simon Glass --- arch/arm/mach-tegra/Kconfig | 13 +++++++++++++ arch/arm/mach-tegra/board2.c | 10 +++++++++- 2 files changed, 22 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 48a387c957..0b2852c4da 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -52,6 +52,19 @@ config TEGRA210 endchoice +config TEGRA_DISCONNECT_UDC_ON_BOOT + bool "Disconnect USB device mode controller on boot" + default y + help + When loading U-Boot into RAM over USB protocols using tools such as + tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device + mode controller is initialized and enumerated by the host PC running + the tool. Unfortunately, these tools do not shut down the USB + controller before executing the downloaded code, and so the host PC + does not "de-enumerate" the USB device. This option shuts down the + USB controller when U-Boot boots to avoid leaving a stale USB device + present. + config SYS_MALLOC_F_LEN default 0x1800 diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index a650abd731..60e19c8387 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -34,8 +34,8 @@ #ifdef CONFIG_TEGRA_CLOCK_SCALING #include #endif -#ifdef CONFIG_USB_EHCI_TEGRA #include +#ifdef CONFIG_USB_EHCI_TEGRA #include #endif #ifdef CONFIG_TEGRA_MMC @@ -201,6 +201,14 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init"))); int board_early_init_f(void) { +#if defined(CONFIG_TEGRA_DISCONNECT_UDC_ON_BOOT) +#define USBCMD_FS2 (1 << 15) + { + struct usb_ctlr *usbctlr = (struct usb_ctlr *)0x7d000000; + writel(USBCMD_FS2, &usbctlr->usb_cmd); + } +#endif + /* Do any special system timer/TSC setup */ #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) if (!tegra_cpu_is_non_secure()) -- cgit v1.2.1