From 7b02bf3c7dc74ab29e5c5f826cc0cfd141e41f2d Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Tue, 27 Jan 2015 22:13:38 -0700 Subject: x86: Make CAR and DRAM FSP code common For now this code seems to be the same for all FSP platforms. Make it common until we see what differences are required. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Tested-by: Bin Meng --- arch/x86/cpu/queensbay/Makefile | 2 +- arch/x86/cpu/queensbay/tnc_car.S | 124 -------------------------------------- arch/x86/cpu/queensbay/tnc_dram.c | 81 ------------------------- arch/x86/lib/fsp/Makefile | 2 + arch/x86/lib/fsp/fsp_car.S | 124 ++++++++++++++++++++++++++++++++++++++ arch/x86/lib/fsp/fsp_dram.c | 81 +++++++++++++++++++++++++ 6 files changed, 208 insertions(+), 206 deletions(-) delete mode 100644 arch/x86/cpu/queensbay/tnc_car.S delete mode 100644 arch/x86/cpu/queensbay/tnc_dram.c create mode 100644 arch/x86/lib/fsp/fsp_car.S create mode 100644 arch/x86/lib/fsp/fsp_dram.c (limited to 'arch') diff --git a/arch/x86/cpu/queensbay/Makefile b/arch/x86/cpu/queensbay/Makefile index b3e7d87956..d8761fdfbd 100644 --- a/arch/x86/cpu/queensbay/Makefile +++ b/arch/x86/cpu/queensbay/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += tnc_car.o tnc_dram.o tnc.o topcliff.o obj-y += fsp_configs.o +obj-y += tnc.o topcliff.o obj-$(CONFIG_PCI) += tnc_pci.o diff --git a/arch/x86/cpu/queensbay/tnc_car.S b/arch/x86/cpu/queensbay/tnc_car.S deleted file mode 100644 index 5e09568b85..0000000000 --- a/arch/x86/cpu/queensbay/tnc_car.S +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Copyright (C) 2014, Bin Meng - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -.globl car_init -car_init: - /* - * Note: ebp holds the BIST value (built-in self test) so far, but ebp - * will be destroyed through the FSP call, thus we have to test the - * BIST value here before we call into FSP. - */ - test %ebp, %ebp - jz car_init_start - post_code(POST_BIST_FAILURE) - jmp die - -car_init_start: - post_code(POST_CAR_START) - lea find_fsp_header_romstack, %esp - jmp find_fsp_header - -find_fsp_header_ret: - /* EAX points to FSP_INFO_HEADER */ - mov %eax, %ebp - - /* sanity test */ - cmp $CONFIG_FSP_ADDR, %eax - jb die - - /* calculate TempRamInitEntry address */ - mov 0x30(%ebp), %eax - add 0x1c(%ebp), %eax - - /* call FSP TempRamInitEntry to setup temporary stack */ - lea temp_ram_init_romstack, %esp - jmp *%eax - -temp_ram_init_ret: - addl $4, %esp - cmp $0, %eax - jnz car_init_fail - - post_code(POST_CAR_CPU_CACHE) - - /* - * The FSP TempRamInit initializes the ecx and edx registers to - * point to a temporary but writable memory range (Cache-As-RAM). - * ecx: the start of this temporary memory range, - * edx: the end of this range. - */ - - /* stack grows down from top of CAR */ - movl %edx, %esp - - /* - * TODO: - * - * According to FSP architecture spec, the fsp_init() will not return - * to its caller, instead it requires the bootloader to provide a - * so-called continuation function to pass into the FSP as a parameter - * of fsp_init, and fsp_init() will call that continuation function - * directly. - * - * The call to fsp_init() may need to be moved out of the car_init() - * to cpu_init_f() with the help of some inline assembly codes. - * Note there is another issue that fsp_init() will setup another stack - * using the fsp_init parameter stack_top after DRAM is initialized, - * which means any data on the previous stack (on the CAR) gets lost - * (ie: U-Boot global_data). FSP is supposed to support such scenario, - * however it does not work. This should be revisited in the future. - */ - movl $CONFIG_FSP_TEMP_RAM_ADDR, %eax - xorl %edx, %edx - xorl %ecx, %ecx - call fsp_init - -.global fsp_init_done -fsp_init_done: - /* - * We come here from FspInit with eax pointing to the HOB list. - * Save eax to esi temporarily. - */ - movl %eax, %esi - /* - * Re-initialize the ebp (BIST) to zero, as we already reach here - * which means we passed BIST testing before. - */ - xorl %ebp, %ebp - jmp car_init_ret - -car_init_fail: - post_code(POST_CAR_FAILURE) - -die: - hlt - jmp die - hlt - - /* - * The function call before CAR initialization is tricky. It cannot - * be called using the 'call' instruction but only the 'jmp' with - * the help of a handcrafted stack in the ROM. The stack needs to - * contain the function return address as well as the parameters. - */ - .balign 4 -find_fsp_header_romstack: - .long find_fsp_header_ret - - .balign 4 -temp_ram_init_romstack: - .long temp_ram_init_ret - .long temp_ram_init_params -temp_ram_init_params: -_dt_ucode_base_size: - /* These next two fields are filled in by ifdtool */ - .long 0 /* microcode base */ - .long 0 /* microcode size */ - .long CONFIG_SYS_MONITOR_BASE /* code region base */ - .long CONFIG_SYS_MONITOR_LEN /* code region size */ diff --git a/arch/x86/cpu/queensbay/tnc_dram.c b/arch/x86/cpu/queensbay/tnc_dram.c deleted file mode 100644 index 4c0a7c82ca..0000000000 --- a/arch/x86/cpu/queensbay/tnc_dram.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2014, Bin Meng - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - phys_size_t ram_size = 0; - const struct hob_header *hdr; - struct hob_res_desc *res_desc; - - hdr = gd->arch.hob_list; - while (!end_of_hob(hdr)) { - if (hdr->type == HOB_TYPE_RES_DESC) { - res_desc = (struct hob_res_desc *)hdr; - if (res_desc->type == RES_SYS_MEM || - res_desc->type == RES_MEM_RESERVED) { - ram_size += res_desc->len; - } - } - hdr = get_next_hob(hdr); - } - - gd->ram_size = ram_size; - post_code(POST_DRAM); - - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = 0; - gd->bd->bi_dram[0].size = gd->ram_size; -} - -/* - * This function looks for the highest region of memory lower than 4GB which - * has enough space for U-Boot where U-Boot is aligned on a page boundary. - * It overrides the default implementation found elsewhere which simply - * picks the end of ram, wherever that may be. The location of the stack, - * the relocation address, and how far U-Boot is moved by relocation are - * set in the global data structure. - */ -ulong board_get_usable_ram_top(ulong total_size) -{ - return fsp_get_usable_lowmem_top(gd->arch.hob_list); -} - -unsigned install_e820_map(unsigned max_entries, struct e820entry *entries) -{ - unsigned num_entries = 0; - const struct hob_header *hdr; - struct hob_res_desc *res_desc; - - hdr = gd->arch.hob_list; - - while (!end_of_hob(hdr)) { - if (hdr->type == HOB_TYPE_RES_DESC) { - res_desc = (struct hob_res_desc *)hdr; - entries[num_entries].addr = res_desc->phys_start; - entries[num_entries].size = res_desc->len; - - if (res_desc->type == RES_SYS_MEM) - entries[num_entries].type = E820_RAM; - else if (res_desc->type == RES_MEM_RESERVED) - entries[num_entries].type = E820_RESERVED; - } - hdr = get_next_hob(hdr); - num_entries++; - } - - return num_entries; -} diff --git a/arch/x86/lib/fsp/Makefile b/arch/x86/lib/fsp/Makefile index 1b9b0e279a..3a2bac0636 100644 --- a/arch/x86/lib/fsp/Makefile +++ b/arch/x86/lib/fsp/Makefile @@ -4,4 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-y += fsp_car.o +obj-y += fsp_dram.o obj-y += fsp_support.o diff --git a/arch/x86/lib/fsp/fsp_car.S b/arch/x86/lib/fsp/fsp_car.S new file mode 100644 index 0000000000..5e09568b85 --- /dev/null +++ b/arch/x86/lib/fsp/fsp_car.S @@ -0,0 +1,124 @@ +/* + * Copyright (C) 2014, Bin Meng + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +.globl car_init +car_init: + /* + * Note: ebp holds the BIST value (built-in self test) so far, but ebp + * will be destroyed through the FSP call, thus we have to test the + * BIST value here before we call into FSP. + */ + test %ebp, %ebp + jz car_init_start + post_code(POST_BIST_FAILURE) + jmp die + +car_init_start: + post_code(POST_CAR_START) + lea find_fsp_header_romstack, %esp + jmp find_fsp_header + +find_fsp_header_ret: + /* EAX points to FSP_INFO_HEADER */ + mov %eax, %ebp + + /* sanity test */ + cmp $CONFIG_FSP_ADDR, %eax + jb die + + /* calculate TempRamInitEntry address */ + mov 0x30(%ebp), %eax + add 0x1c(%ebp), %eax + + /* call FSP TempRamInitEntry to setup temporary stack */ + lea temp_ram_init_romstack, %esp + jmp *%eax + +temp_ram_init_ret: + addl $4, %esp + cmp $0, %eax + jnz car_init_fail + + post_code(POST_CAR_CPU_CACHE) + + /* + * The FSP TempRamInit initializes the ecx and edx registers to + * point to a temporary but writable memory range (Cache-As-RAM). + * ecx: the start of this temporary memory range, + * edx: the end of this range. + */ + + /* stack grows down from top of CAR */ + movl %edx, %esp + + /* + * TODO: + * + * According to FSP architecture spec, the fsp_init() will not return + * to its caller, instead it requires the bootloader to provide a + * so-called continuation function to pass into the FSP as a parameter + * of fsp_init, and fsp_init() will call that continuation function + * directly. + * + * The call to fsp_init() may need to be moved out of the car_init() + * to cpu_init_f() with the help of some inline assembly codes. + * Note there is another issue that fsp_init() will setup another stack + * using the fsp_init parameter stack_top after DRAM is initialized, + * which means any data on the previous stack (on the CAR) gets lost + * (ie: U-Boot global_data). FSP is supposed to support such scenario, + * however it does not work. This should be revisited in the future. + */ + movl $CONFIG_FSP_TEMP_RAM_ADDR, %eax + xorl %edx, %edx + xorl %ecx, %ecx + call fsp_init + +.global fsp_init_done +fsp_init_done: + /* + * We come here from FspInit with eax pointing to the HOB list. + * Save eax to esi temporarily. + */ + movl %eax, %esi + /* + * Re-initialize the ebp (BIST) to zero, as we already reach here + * which means we passed BIST testing before. + */ + xorl %ebp, %ebp + jmp car_init_ret + +car_init_fail: + post_code(POST_CAR_FAILURE) + +die: + hlt + jmp die + hlt + + /* + * The function call before CAR initialization is tricky. It cannot + * be called using the 'call' instruction but only the 'jmp' with + * the help of a handcrafted stack in the ROM. The stack needs to + * contain the function return address as well as the parameters. + */ + .balign 4 +find_fsp_header_romstack: + .long find_fsp_header_ret + + .balign 4 +temp_ram_init_romstack: + .long temp_ram_init_ret + .long temp_ram_init_params +temp_ram_init_params: +_dt_ucode_base_size: + /* These next two fields are filled in by ifdtool */ + .long 0 /* microcode base */ + .long 0 /* microcode size */ + .long CONFIG_SYS_MONITOR_BASE /* code region base */ + .long CONFIG_SYS_MONITOR_LEN /* code region size */ diff --git a/arch/x86/lib/fsp/fsp_dram.c b/arch/x86/lib/fsp/fsp_dram.c new file mode 100644 index 0000000000..4c0a7c82ca --- /dev/null +++ b/arch/x86/lib/fsp/fsp_dram.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2014, Bin Meng + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + phys_size_t ram_size = 0; + const struct hob_header *hdr; + struct hob_res_desc *res_desc; + + hdr = gd->arch.hob_list; + while (!end_of_hob(hdr)) { + if (hdr->type == HOB_TYPE_RES_DESC) { + res_desc = (struct hob_res_desc *)hdr; + if (res_desc->type == RES_SYS_MEM || + res_desc->type == RES_MEM_RESERVED) { + ram_size += res_desc->len; + } + } + hdr = get_next_hob(hdr); + } + + gd->ram_size = ram_size; + post_code(POST_DRAM); + + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = 0; + gd->bd->bi_dram[0].size = gd->ram_size; +} + +/* + * This function looks for the highest region of memory lower than 4GB which + * has enough space for U-Boot where U-Boot is aligned on a page boundary. + * It overrides the default implementation found elsewhere which simply + * picks the end of ram, wherever that may be. The location of the stack, + * the relocation address, and how far U-Boot is moved by relocation are + * set in the global data structure. + */ +ulong board_get_usable_ram_top(ulong total_size) +{ + return fsp_get_usable_lowmem_top(gd->arch.hob_list); +} + +unsigned install_e820_map(unsigned max_entries, struct e820entry *entries) +{ + unsigned num_entries = 0; + const struct hob_header *hdr; + struct hob_res_desc *res_desc; + + hdr = gd->arch.hob_list; + + while (!end_of_hob(hdr)) { + if (hdr->type == HOB_TYPE_RES_DESC) { + res_desc = (struct hob_res_desc *)hdr; + entries[num_entries].addr = res_desc->phys_start; + entries[num_entries].size = res_desc->len; + + if (res_desc->type == RES_SYS_MEM) + entries[num_entries].type = E820_RAM; + else if (res_desc->type == RES_MEM_RESERVED) + entries[num_entries].type = E820_RESERVED; + } + hdr = get_next_hob(hdr); + num_entries++; + } + + return num_entries; +} -- cgit v1.2.1