From e6a9ed04e78cf87ec97e306fa4e7a1669ef98df6 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 20 Nov 2015 13:17:22 +0100 Subject: ARM64: zynqmp: Add SPL support support Support RAM and MMC boot mode in SPL also with SPL_FIT images. In MMC boot mode two boot options are available: 1) Boot flow with ATF(EL3) and full U-Boot(EL2): aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin mkimage -A arm64 -O linux -T kernel -C none -a 0xfffe5000 -e 0xfffe5000 -d bl31.bin atf.ub cp spl/boot.bin cp atf.ub cp u-boot.bin 2) Boot flow with full U-Boot(EL3): cp spl/boot.bin cp u-boot*.img 3) emmc boot mode dd if=/dev/zero of=sd.img bs=1024 count=1024 parted sd.img mktable msdos parted sd.img mkpart p fat32 0% 100% kpartx -a sd.img mkfs.vfat /dev/mapper/loop0p1 mount /dev/mapper/loop0p1 /mnt/ cp spl/boot.bin /mnt cp u-boot.img /mnt cp u-boot.bin /mnt cp atf.ub /mnt umount /dev/mapper/loop0p1 kpartx -d sd.img cp sd.img /tftpboot/ and program it via u-boot tftpb 10000 sd.img mmcinfo mmc write 10000 0 $filesize mmc rescan mmc part ls mmc 0 psu_init() function contains low level SoC setup generated for every HW design by Xilinx design tools. xil_io.h is only supporting file to fix all dependencies from tools. The same solution was used on Xilinx Zynq. The patch also change CONFIG_SYS_INIT_SP_ADDR to the end of OCM which stays at the same location all the time. Bootrom expects starting address to be at 0xfffc0000 that's why this address is SPL_TEXT_BASE. Signed-off-by: Michal Simek --- arch/arm/Kconfig | 1 + arch/arm/cpu/armv8/zynqmp/Makefile | 1 + arch/arm/cpu/armv8/zynqmp/spl.c | 107 +++++++++++++++++++++++++++ arch/arm/include/asm/arch-zynqmp/sys_proto.h | 2 + 4 files changed, 111 insertions(+) create mode 100644 arch/arm/cpu/armv8/zynqmp/spl.c (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6b65d8e76a..729b1816bf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -594,6 +594,7 @@ config ARCH_ZYNQMP select DM select OF_CONTROL select DM_SERIAL + select SUPPORT_SPL config TEGRA bool "NVIDIA Tegra" diff --git a/arch/arm/cpu/armv8/zynqmp/Makefile b/arch/arm/cpu/armv8/zynqmp/Makefile index d0ed2223ff..be8673a7db 100644 --- a/arch/arm/cpu/armv8/zynqmp/Makefile +++ b/arch/arm/cpu/armv8/zynqmp/Makefile @@ -9,3 +9,4 @@ obj-y += clk.o obj-y += cpu.o obj-$(CONFIG_MP) += mp.o obj-y += slcr.o +obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c b/arch/arm/cpu/armv8/zynqmp/spl.c new file mode 100644 index 0000000000..e3e2a4fb5a --- /dev/null +++ b/arch/arm/cpu/armv8/zynqmp/spl.c @@ -0,0 +1,107 @@ +/* + * Copyright 2015 - 2016 Xilinx, Inc. + * + * Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#include +#include +#include +#include + +void board_init_f(ulong dummy) +{ + psu_init(); + board_early_init_r(); + +#ifdef CONFIG_DEBUG_UART + /* Uart debug for sure */ + debug_uart_init(); + puts("Debug uart enabled\n"); /* or printch() */ +#endif + /* Delay is required for clocks to be propagated */ + udelay(1000000); + + /* Clear the BSS */ + memset(__bss_start, 0, __bss_end - __bss_start); + + /* No need to call timer init - it is empty for ZynqMP */ + board_init_r(NULL, 0); +} + +#ifdef CONFIG_SPL_BOARD_INIT +void spl_board_init(void) +{ + preloader_console_init(); + board_init(); +} +#endif + +u32 spl_boot_device(void) +{ + u32 reg = 0; + u8 bootmode; + + reg = readl(&crlapb_base->boot_mode); + bootmode = reg & BOOT_MODES_MASK; + + switch (bootmode) { + case JTAG_MODE: + return BOOT_DEVICE_RAM; +#ifdef CONFIG_SPL_MMC_SUPPORT + case EMMC_MODE: + case SD_MODE: + case SD_MODE1: + return BOOT_DEVICE_MMC1; +#endif + default: + printf("Invalid Boot Mode:0x%x\n", bootmode); + break; + } + + return 0; +} + +u32 spl_boot_mode(void) +{ + switch (spl_boot_device()) { + case BOOT_DEVICE_RAM: + return 0; + case BOOT_DEVICE_MMC1: + return MMCSD_MODE_FS; + default: + puts("spl: error: unsupported device\n"); + hang(); + } +} + +__weak void psu_init(void) +{ + /* + * This function is overridden by the one in + * board/xilinx/zynqmp/(platform)/psu_init_gpl.c, if it exists. + */ +} + +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif diff --git a/arch/arm/include/asm/arch-zynqmp/sys_proto.h b/arch/arm/include/asm/arch-zynqmp/sys_proto.h index 021626dc14..1db2bd6a4f 100644 --- a/arch/arm/include/asm/arch-zynqmp/sys_proto.h +++ b/arch/arm/include/asm/arch-zynqmp/sys_proto.h @@ -17,4 +17,6 @@ int zynq_slcr_get_mio_pin_status(const char *periph); unsigned int zynqmp_get_silicon_version(void); +void psu_init(void); + #endif /* _ASM_ARCH_SYS_PROTO_H */ -- cgit v1.2.1