From a55d9feeec141bc5ec04cf84c86e270cf0ed0d3c Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 16 Feb 2016 17:08:39 +0900 Subject: ARM: uniphier: add eMMC boot support Export device nodes needed for eMMC boot (eMMC node, pinctrl, and clock) to the SPL DTB. CONFIG_SUPPORT_EMMC_BOOT is also necessary to use "mmc partconf" command. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/boot-mode/boot-mode.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch/arm/mach-uniphier') diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode.c index 935e551472..2f2e45d2c1 100644 --- a/arch/arm/mach-uniphier/boot-mode/boot-mode.c +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c @@ -5,6 +5,7 @@ */ #include +#include #include #include "../sbc/sbc-regs.h" @@ -52,3 +53,27 @@ u32 spl_boot_device(void) return ret == BOOT_DEVICE_USB ? BOOT_DEVICE_NOR : ret; } + +u32 spl_boot_mode(void) +{ + struct mmc *mmc; + + /* + * work around a bug in the Boot ROM of PH1-sLD3, LD4, Pro4, and sLD8: + * + * The boot ROM in these SoCs breaks the PARTITION_CONFIG [179] of + * Extended CSD register; when switching to the Boot Partition 1, the + * Boot ROM should issue the SWITCH command (CMD6) with Set Bits for + * the Access Bits, but in fact it uses Write Byte for the Access Bits. + * As a result, the BOOT_PARTITION_ENABLE field of the PARTITION_CONFIG + * is lost. This bug was fixed for PH1-Pro5 and later SoCs. + * + * Fixup mmc->part_config here because it is used to determine the + * partition which the U-Boot image is read from. + */ + mmc = find_mmc_device(0); + mmc->part_config &= ~EXT_CSD_BOOT_PART_NUM(PART_ACCESS_MASK); + mmc->part_config |= EXT_CSD_BOOT_PARTITION_ENABLE; + + return MMCSD_MODE_EMMCBOOT; +} -- cgit v1.2.1