From 9eb7acef97d1a892d59c5928001dd9516bb592de Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 27 Feb 2015 02:26:43 +0900 Subject: ARM: UniPhier: move SoC headers to mach-uniphier/include/mach Move arch/arm/include/asm/arch-uniphier/* -> arch/arm/mach-uniphier/include/mach/* Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/include/mach/sc-regs.h | 62 +++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 arch/arm/mach-uniphier/include/mach/sc-regs.h (limited to 'arch/arm/mach-uniphier/include/mach/sc-regs.h') diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h new file mode 100644 index 0000000000..1197bb52d4 --- /dev/null +++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h @@ -0,0 +1,62 @@ +/* + * UniPhier SC (System Control) block registers + * + * Copyright (C) 2011-2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_SC_REGS_H +#define ARCH_SC_REGS_H + +#define SC_BASE_ADDR 0x61840000 + +#define SC_MPLLOSCCTL (SC_BASE_ADDR | 0x1184) +#define SC_MPLLOSCCTL_MPLLEN (0x1 << 0) +#define SC_MPLLOSCCTL_MPLLST (0x1 << 1) + +#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200) +#define SC_DPLLCTRL_SSC_EN (0x1 << 31) +#define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16) +#define SC_DPLLCTRL_SSC_RATE (0x1 << 15) + +#define SC_DPLLCTRL2 (SC_BASE_ADDR | 0x1204) +#define SC_DPLLCTRL2_NRSTDS (0x1 << 28) + +#define SC_DPLLCTRL3 (SC_BASE_ADDR | 0x1208) +#define SC_DPLLCTRL3_LPFSEL_COEF2 (0x0 << 31) +#define SC_DPLLCTRL3_LPFSEL_COEF3 (0x1 << 31) + +#define SC_UPLLCTRL (SC_BASE_ADDR | 0x1210) + +#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1270) +#define SC_VPLL27ACTRL2 (SC_BASE_ADDR | 0x1274) +#define SC_VPLL27ACTRL3 (SC_BASE_ADDR | 0x1278) + +#define SC_VPLL27BCTRL (SC_BASE_ADDR | 0x1290) +#define SC_VPLL27BCTRL2 (SC_BASE_ADDR | 0x1294) +#define SC_VPLL27BCTRL3 (SC_BASE_ADDR | 0x1298) + +#define SC_RSTCTRL (SC_BASE_ADDR | 0x2000) +#define SC_RSTCTRL_NRST_ETHER (0x1 << 12) +#define SC_RSTCTRL_NRST_UMC1 (0x1 << 5) +#define SC_RSTCTRL_NRST_UMC0 (0x1 << 4) +#define SC_RSTCTRL_NRST_NAND (0x1 << 2) + +#define SC_RSTCTRL2 (SC_BASE_ADDR | 0x2004) +#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008) + +#define SC_CLKCTRL (SC_BASE_ADDR | 0x2104) +#define SC_CLKCTRL_CLK_ETHER (0x1 << 12) +#define SC_CLKCTRL_CLK_MIO (0x1 << 11) +#define SC_CLKCTRL_CLK_UMC (0x1 << 4) +#define SC_CLKCTRL_CLK_NAND (0x1 << 2) +#define SC_CLKCTRL_CLK_SBC (0x1 << 1) +#define SC_CLKCTRL_CLK_PERI (0x1 << 0) + +/* System reset control register */ +#define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000) +#define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010) +#define SC_SLFRSTCTL (SC_BASE_ADDR | 0x3014) + +#endif /* ARCH_SC_REGS_H */ -- cgit v1.2.1