From 620118403e1521b4c883848a84d2fb68e3fa1aa0 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 20 Feb 2015 17:04:03 +0900 Subject: ARM: at91: collect SoC sources into mach-at91 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit moves source files as follows: arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/* arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/* arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/* arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/* Signed-off-by: Masahiro Yamada Acked-by: Andreas Bießmann --- arch/arm/mach-at91/arm926ejs/Makefile | 28 +++ arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c | 245 ++++++++++++++++++++ arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c | 140 ++++++++++++ arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c | 218 ++++++++++++++++++ .../mach-at91/arm926ejs/at91sam9m10g45_devices.c | 184 +++++++++++++++ arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c | 161 +++++++++++++ arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c | 103 +++++++++ arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c | 244 ++++++++++++++++++++ arch/arm/mach-at91/arm926ejs/clock.c | 249 ++++++++++++++++++++ arch/arm/mach-at91/arm926ejs/cpu.c | 57 +++++ arch/arm/mach-at91/arm926ejs/eflash.c | 254 +++++++++++++++++++++ arch/arm/mach-at91/arm926ejs/led.c | 48 ++++ arch/arm/mach-at91/arm926ejs/lowlevel_init.S | 246 ++++++++++++++++++++ arch/arm/mach-at91/arm926ejs/reset.c | 29 +++ arch/arm/mach-at91/arm926ejs/timer.c | 120 ++++++++++ 15 files changed, 2326 insertions(+) create mode 100644 arch/arm/mach-at91/arm926ejs/Makefile create mode 100644 arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c create mode 100644 arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c create mode 100644 arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c create mode 100644 arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c create mode 100644 arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c create mode 100644 arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c create mode 100644 arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c create mode 100644 arch/arm/mach-at91/arm926ejs/clock.c create mode 100644 arch/arm/mach-at91/arm926ejs/cpu.c create mode 100644 arch/arm/mach-at91/arm926ejs/eflash.c create mode 100644 arch/arm/mach-at91/arm926ejs/led.c create mode 100644 arch/arm/mach-at91/arm926ejs/lowlevel_init.S create mode 100644 arch/arm/mach-at91/arm926ejs/reset.c create mode 100644 arch/arm/mach-at91/arm926ejs/timer.c (limited to 'arch/arm/mach-at91/arm926ejs') diff --git a/arch/arm/mach-at91/arm926ejs/Makefile b/arch/arm/mach-at91/arm926ejs/Makefile new file mode 100644 index 0000000000..ddc323f641 --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/Makefile @@ -0,0 +1,28 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o +obj-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o +obj-$(CONFIG_AT91SAM9XE) += at91sam9260_devices.o +obj-$(CONFIG_AT91SAM9261) += at91sam9261_devices.o +obj-$(CONFIG_AT91SAM9G10) += at91sam9261_devices.o +obj-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o +obj-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o +obj-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o +obj-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o +obj-$(CONFIG_AT91SAM9N12) += at91sam9n12_devices.o +obj-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o +obj-$(CONFIG_AT91_EFLASH) += eflash.o +obj-$(CONFIG_AT91_LED) += led.o +obj-y += clock.o +obj-y += cpu.o +obj-y += reset.o +obj-y += timer.o + +ifndef CONFIG_SKIP_LOWLEVEL_INIT +obj-y += lowlevel_init.o +endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c new file mode 100644 index 0000000000..efb53d673f --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c @@ -0,0 +1,245 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_seriald_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */ + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTC, 11, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTC, 16, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTC, 17, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTC, 11, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTC, 16, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTC, 17, 1); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 3, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTC, 5, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTC, 4, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTC, 3, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 3, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTC, 5, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTC, 4, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTC, 3, 1); + } +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + /* Enable EMAC clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTA, 25, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 26, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ERXCK */ +#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260) + /* + * use PA10, PA11 for ETX2, ETX3. + * PA23 and PA24 are for TWI EEPROM + */ + at91_set_b_periph(AT91_PIO_PORTA, 10, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 11, 0); /* ETX3 */ +#else + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */ +#if defined(CONFIG_AT91SAM9G20) + /* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */ + at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0); + at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0); +#endif +#endif + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */ +#endif +} +#endif + +#if defined(CONFIG_GENERIC_ATMEL_MCI) +void at91_mci_hw_init(void) +{ + /* Enable mci clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_MCI, &pmc->pcer); + + at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */ +#if defined(CONFIG_ATMEL_MCI_PORTB) + at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */ + at91_set_b_periph(AT91_PIO_PORTA, 0, 1); /* MCDB0 */ + at91_set_b_periph(AT91_PIO_PORTA, 5, 1); /* MCDB1 */ + at91_set_b_periph(AT91_PIO_PORTA, 4, 1); /* MCDB2 */ + at91_set_b_periph(AT91_PIO_PORTA, 3, 1); /* MCDB3 */ +#else + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* MCCDA */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* MCDA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 1); /* MCDA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* MCDA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* MCDA3 */ +#endif +} +#endif + +void at91_sdram_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTC, 16, 0); + at91_set_a_periph(AT91_PIO_PORTC, 17, 0); + at91_set_a_periph(AT91_PIO_PORTC, 18, 0); + at91_set_a_periph(AT91_PIO_PORTC, 19, 0); + at91_set_a_periph(AT91_PIO_PORTC, 20, 0); + at91_set_a_periph(AT91_PIO_PORTC, 21, 0); + at91_set_a_periph(AT91_PIO_PORTC, 22, 0); + at91_set_a_periph(AT91_PIO_PORTC, 23, 0); + at91_set_a_periph(AT91_PIO_PORTC, 24, 0); + at91_set_a_periph(AT91_PIO_PORTC, 25, 0); + at91_set_a_periph(AT91_PIO_PORTC, 26, 0); + at91_set_a_periph(AT91_PIO_PORTC, 27, 0); + at91_set_a_periph(AT91_PIO_PORTC, 28, 0); + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); + at91_set_a_periph(AT91_PIO_PORTC, 30, 0); + at91_set_a_periph(AT91_PIO_PORTC, 31, 0); +} + +/* Platform data for the GPIOs */ +static const struct at91_port_platdata at91sam9260_plat[] = { + { ATMEL_BASE_PIOA, "PA" }, + { ATMEL_BASE_PIOB, "PB" }, + { ATMEL_BASE_PIOC, "PC" }, +}; + +U_BOOT_DEVICES(at91sam9260_gpios) = { + { "gpio_at91", &at91sam9260_plat[0] }, + { "gpio_at91", &at91sam9260_plat[1] }, + { "gpio_at91", &at91sam9260_plat[2] }, +}; diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c new file mode 100644 index 0000000000..a445c7507e --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c @@ -0,0 +1,140 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_seriald_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_a_periph(AT91_PIO_PORTA, 4, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_a_periph(AT91_PIO_PORTA, 6, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTA, 4, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTA, 5, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTA, 6, 1); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 30, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 31, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 29, PUP); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 28, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTA, 24, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTA, 25, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_a_periph(AT91_PIO_PORTA, 26, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 28, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTA, 24, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTA, 25, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTA, 26, 1); + } +} +#endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c new file mode 100644 index 0000000000..6b51d5f355 --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c @@ -0,0 +1,218 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * (C) Copyright 2009-2011 + * Daniel Gorsulowski + * esd electronic system design gmbh + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTD, 1, PUP); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTD, 3, PUP); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_seriald_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTC, 30, PUP); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */ + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_b_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_b_periph(AT91_PIO_PORTA, 5, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTA, 4, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTB, 11, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTA, 5, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTA, 4, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTB, 11, 1); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 12, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 13, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 15, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_a_periph(AT91_PIO_PORTB, 16, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_a_periph(AT91_PIO_PORTB, 17, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_a_periph(AT91_PIO_PORTB, 18, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 15, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTB, 16, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTB, 17, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTB, 18, 1); + } +} +#endif + +#if defined(CONFIG_GENERIC_ATMEL_MCI) +void at91_mci_hw_init(void) +{ + /* Enable mci clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_MCI1, &pmc->pcer); + + at91_set_a_periph(AT91_PIO_PORTA, 6, PUP); /* MCI1_CK */ + +#if defined(CONFIG_ATMEL_MCI_PORTB) + at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* MCI1_CDB */ + at91_set_a_periph(AT91_PIO_PORTA, 22, PUP); /* MCI1_DB0 */ + at91_set_a_periph(AT91_PIO_PORTA, 23, PUP); /* MCI1_DB1 */ + at91_set_a_periph(AT91_PIO_PORTA, 24, PUP); /* MCI1_DB2 */ + at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* MCI1_DB3 */ +#else + at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* MCI1_CDA */ + at91_set_a_periph(AT91_PIO_PORTA, 8, PUP); /* MCI1_DA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, PUP); /* MCI1_DA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, PUP); /* MCI1_DA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, PUP); /* MCI1_DA3 */ +#endif +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTE, 21, 0); /* ETXCK_EREFCK */ + at91_set_b_periph(AT91_PIO_PORTC, 25, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTE, 25, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTE, 26, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTE, 27, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTE, 28, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTE, 23, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTE, 24, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTE, 30, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTE, 29, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_a_periph(AT91_PIO_PORTE, 22, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTC, 26, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTC, 22, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ERXCK */ + at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ETX3 */ + at91_set_b_periph(AT91_PIO_PORTC, 24, 0); /* ETXER */ +#endif +} +#endif + +#ifdef CONFIG_USB_OHCI_NEW +void at91_uhp_hw_init(void) +{ + /* Enable VBus on UHP ports */ + at91_set_pio_output(AT91_PIO_PORTA, 21, 0); + at91_set_pio_output(AT91_PIO_PORTA, 24, 0); +} +#endif + +#ifdef CONFIG_AT91_CAN +void at91_can_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* CAN_TX */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 1); /* CAN_RX */ + + /* Enable clock */ + writel(1 << ATMEL_ID_CAN, &pmc->pcer); +} +#endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c new file mode 100644 index 0000000000..0e6c0da1bd --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c @@ -0,0 +1,184 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 19, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTB, 18, PUP); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTD, 6, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTD, 7, PUP); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_seriald_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 1); /* DTXD */ + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 3, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTB, 18, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTB, 19, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTD, 27, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 3, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTB, 18, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTB, 19, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTD, 27, 1); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 15, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 16, PUP); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 17, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTD, 28, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_a_periph(AT91_PIO_PORTD, 18, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_a_periph(AT91_PIO_PORTD, 19, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 17, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTD, 28, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTD, 18, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTD, 19, 1); + } + +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* EMDC */ +#ifndef CONFIG_RMII + at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTA, 30, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTA, 8, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 9, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ERXCK */ + at91_set_b_periph(AT91_PIO_PORTA, 6, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 7, 0); /* ETX3 */ + at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ETXER */ +#endif +} +#endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +void at91_mci_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* MCI0 DA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */ + + /* Enable clock */ + writel(1 << ATMEL_ID_MCI0, &pmc->pcer); +} +#endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c new file mode 100644 index 0000000000..39f17a1e11 --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c @@ -0,0 +1,161 @@ +/* + * (C) Copyright 2013 Atmel Corporation + * Josh Wu + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +unsigned int has_lcdc() +{ + return 1; +} + +void at91_serial0_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_serial3_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */ + at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */ + writel(1 << ATMEL_ID_USART3, &pmc->pcer); +} + +void at91_seriald_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +#ifdef CONFIG_ATMEL_SPI +void at91_spi0_hw_init(unsigned long cs_mask) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_pio_output(AT91_PIO_PORTA, 14, 1); + if (cs_mask & (1 << 1)) + at91_set_pio_output(AT91_PIO_PORTA, 7, 1); + if (cs_mask & (1 << 2)) + at91_set_pio_output(AT91_PIO_PORTA, 1, 1); + if (cs_mask & (1 << 3)) + at91_set_pio_output(AT91_PIO_PORTB, 3, 1); +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_pio_output(AT91_PIO_PORTA, 8, 1); + if (cs_mask & (1 << 1)) + at91_set_pio_output(AT91_PIO_PORTA, 0, 1); + if (cs_mask & (1 << 2)) + at91_set_pio_output(AT91_PIO_PORTA, 31, 1); + if (cs_mask & (1 << 3)) + at91_set_pio_output(AT91_PIO_PORTA, 30, 1); +} +#endif + +void at91_mci_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */ + + writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer); +} + +#ifdef CONFIG_LCD +void at91_lcd_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */ + at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ + at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */ + + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ + at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ + at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ + at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ + at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ + at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ + at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ + at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ + at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ + at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ + + writel(1 << ATMEL_ID_LCDC, &pmc->pcer); +} +#endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c new file mode 100644 index 0000000000..0ec32c3ab9 --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTA, 12, PUP); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 14, PUP); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_seriald_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* DTXD */ + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 26, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTA, 28, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTB, 7, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_a_periph(AT91_PIO_PORTD, 8, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTD, 9, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTA, 28, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTB, 7, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTD, 8, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTD, 9, 1); + } +} +#endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c new file mode 100644 index 0000000000..6d94572237 --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c @@ -0,0 +1,244 @@ +/* + * Copyright (C) 2012 Atmel Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +unsigned int get_chip_id(void) +{ + /* The 0x40 is the offset of cidr in DBGU */ + return readl(ATMEL_BASE_DBGU + 0x40) & ~ARCH_ID_VERSION_MASK; +} + +unsigned int get_extension_chip_id(void) +{ + /* The 0x44 is the offset of exid in DBGU */ + return readl(ATMEL_BASE_DBGU + 0x44); +} + +unsigned int has_emac1() +{ + return cpu_is_at91sam9x25(); +} + +unsigned int has_emac0() +{ + return !(cpu_is_at91sam9g15()); +} + +unsigned int has_lcdc() +{ + return cpu_is_at91sam9g15() || cpu_is_at91sam9g35() + || cpu_is_at91sam9x35(); +} + +char *get_cpu_name() +{ + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_at91sam9x5()) { + switch (extension_id) { + case ARCH_EXID_AT91SAM9G15: + return "AT91SAM9G15"; + case ARCH_EXID_AT91SAM9G25: + return "AT91SAM9G25"; + case ARCH_EXID_AT91SAM9G35: + return "AT91SAM9G35"; + case ARCH_EXID_AT91SAM9X25: + return "AT91SAM9X25"; + case ARCH_EXID_AT91SAM9X35: + return "AT91SAM9X35"; + default: + return "Unknown CPU type"; + } + } else { + return "Unknown CPU type"; + } +} + +void at91_seriald_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_mci_hw_init(void) +{ + /* Initialize the MCI0 */ + at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* MCCK */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 1); /* MCCDA */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 1); /* MCDA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 1); /* MCDA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */ + + /* Enable clock for MCI0 */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer); +} + +#ifdef CONFIG_ATMEL_SPI +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); + if (cs_mask & (1 << 1)) + at91_set_b_periph(AT91_PIO_PORTA, 7, 0); + if (cs_mask & (1 << 2)) + at91_set_b_periph(AT91_PIO_PORTA, 1, 0); + if (cs_mask & (1 << 3)) + at91_set_b_periph(AT91_PIO_PORTB, 3, 0); + if (cs_mask & (1 << 4)) + at91_set_pio_output(AT91_PIO_PORTA, 14, 0); + if (cs_mask & (1 << 5)) + at91_set_pio_output(AT91_PIO_PORTA, 7, 0); + if (cs_mask & (1 << 6)) + at91_set_pio_output(AT91_PIO_PORTA, 1, 0); + if (cs_mask & (1 << 7)) + at91_set_pio_output(AT91_PIO_PORTB, 3, 0); +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_b_periph(AT91_PIO_PORTA, 8, 0); + if (cs_mask & (1 << 1)) + at91_set_b_periph(AT91_PIO_PORTA, 0, 0); + if (cs_mask & (1 << 2)) + at91_set_b_periph(AT91_PIO_PORTA, 31, 0); + if (cs_mask & (1 << 3)) + at91_set_b_periph(AT91_PIO_PORTA, 30, 0); + if (cs_mask & (1 << 4)) + at91_set_pio_output(AT91_PIO_PORTA, 8, 0); + if (cs_mask & (1 << 5)) + at91_set_pio_output(AT91_PIO_PORTA, 0, 0); + if (cs_mask & (1 << 6)) + at91_set_pio_output(AT91_PIO_PORTA, 31, 0); + if (cs_mask & (1 << 7)) + at91_set_pio_output(AT91_PIO_PORTA, 30, 0); +} +#endif + +#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI) +void at91_uhp_hw_init(void) +{ + /* Enable VBus on UHP ports */ + at91_set_pio_output(AT91_PIO_PORTD, 18, 0); /* port A */ + at91_set_pio_output(AT91_PIO_PORTD, 19, 0); /* port B */ +#if defined(CONFIG_USB_OHCI_NEW) + /* port C is OHCI only */ + at91_set_pio_output(AT91_PIO_PORTD, 20, 0); /* port C */ +#endif +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + if (has_emac0()) { + /* Enable EMAC0 clock */ + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + /* EMAC0 pins setup */ + at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */ + } + + if (has_emac1()) { + /* Enable EMAC1 clock */ + writel(1 << ATMEL_ID_EMAC1, &pmc->pcer); + /* EMAC1 pins setup */ + at91_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */ + at91_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */ + at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */ + at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */ + at91_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */ + at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */ + at91_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */ + at91_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */ + at91_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */ + at91_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */ + } + +#ifndef CONFIG_RMII + /* Only emac0 support MII */ + if (has_emac0()) { + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ + } +#endif +} +#endif diff --git a/arch/arm/mach-at91/arm926ejs/clock.c b/arch/arm/mach-at91/arm926ejs/clock.c new file mode 100644 index 0000000000..f363982d03 --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/clock.c @@ -0,0 +1,249 @@ +/* + * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c] + * + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static unsigned long at91_css_to_rate(unsigned long css) +{ + switch (css) { + case AT91_PMC_MCKR_CSS_SLOW: + return CONFIG_SYS_AT91_SLOW_CLOCK; + case AT91_PMC_MCKR_CSS_MAIN: + return gd->arch.main_clk_rate_hz; + case AT91_PMC_MCKR_CSS_PLLA: + return gd->arch.plla_rate_hz; + case AT91_PMC_MCKR_CSS_PLLB: + return gd->arch.pllb_rate_hz; + } + + return 0; +} + +#ifdef CONFIG_USB_ATMEL +static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq) +{ + unsigned i, div = 0, mul = 0, diff = 1 << 30; + unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00; + + /* PLL output max 240 MHz (or 180 MHz per errata) */ + if (out_freq > 240000000) + goto fail; + + for (i = 1; i < 256; i++) { + int diff1; + unsigned input, mul1; + + /* + * PLL input between 1MHz and 32MHz per spec, but lower + * frequences seem necessary in some cases so allow 100K. + * Warning: some newer products need 2MHz min. + */ + input = main_freq / i; +#if defined(CONFIG_AT91SAM9G20) + if (input < 2000000) + continue; +#endif + if (input < 100000) + continue; + if (input > 32000000) + continue; + + mul1 = out_freq / input; +#if defined(CONFIG_AT91SAM9G20) + if (mul > 63) + continue; +#endif + if (mul1 > 2048) + continue; + if (mul1 < 2) + goto fail; + + diff1 = out_freq - input * mul1; + if (diff1 < 0) + diff1 = -diff1; + if (diff > diff1) { + diff = diff1; + div = i; + mul = mul1; + if (diff == 0) + break; + } + } + if (i == 256 && diff > (out_freq >> 5)) + goto fail; + return ret | ((mul - 1) << 16) | div; +fail: + return 0; +} +#endif + +static u32 at91_pll_rate(u32 freq, u32 reg) +{ + unsigned mul, div; + + div = reg & 0xff; + mul = (reg >> 16) & 0x7ff; + if (div && mul) { + freq /= div; + freq *= mul + 1; + } else + freq = 0; + + return freq; +} + +int at91_clock_init(unsigned long main_clock) +{ + unsigned freq, mckr; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK + unsigned tmp; + /* + * When the bootloader initialized the main oscillator correctly, + * there's no problem using the cycle counter. But if it didn't, + * or when using oscillator bypass mode, we must be told the speed + * of the main clock. + */ + if (!main_clock) { + do { + tmp = readl(&pmc->mcfr); + } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); + tmp &= AT91_PMC_MCFR_MAINF_MASK; + main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); + } +#endif + gd->arch.main_clk_rate_hz = main_clock; + + /* report if PLLA is more than mildly overclocked */ + gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); + +#ifdef CONFIG_USB_ATMEL + /* + * USB clock init: choose 48 MHz PLLB value, + * disable 48MHz clock during usb peripheral suspend. + * + * REVISIT: assumes MCK doesn't derive from PLLB! + */ + gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | + AT91_PMC_PLLBR_USBDIV_2; + gd->arch.pllb_rate_hz = at91_pll_rate(main_clock, + gd->arch.at91_pllb_usb_init); +#endif + + /* + * MCK and CPU derive from one of those primary clocks. + * For now, assume this parentage won't change. + */ + mckr = readl(&pmc->mckr); +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ + || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) + /* plla divisor by 2 */ + gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); +#endif + gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); + freq = gd->arch.mck_rate_hz; + + freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */ +#if defined(CONFIG_AT91SAM9G20) + /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ + gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ? + freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq; + if (mckr & AT91_PMC_MCKR_MDIV_MASK) + freq /= 2; /* processor clock division */ +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ + || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) + /* mdiv <==> divisor + * 0 <==> 1 + * 1 <==> 2 + * 2 <==> 4 + * 3 <==> 3 + */ + gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) == + (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4) + ? freq / 3 + : freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); +#else + gd->arch.mck_rate_hz = freq / + (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8)); +#endif + gd->arch.cpu_clk_rate_hz = freq; + + return 0; +} + +#if !defined(AT91_PLL_LOCK_TIMEOUT) +#define AT91_PLL_LOCK_TIMEOUT 1000000 +#endif + +void at91_plla_init(u32 pllar) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + int timeout = AT91_PLL_LOCK_TIMEOUT; + + writel(pllar, &pmc->pllar); + while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY))) { + timeout--; + if (timeout == 0) + break; + } +} +void at91_pllb_init(u32 pllbr) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + int timeout = AT91_PLL_LOCK_TIMEOUT; + + writel(pllbr, &pmc->pllbr); + while (!(readl(&pmc->sr) & (AT91_PMC_LOCKB | AT91_PMC_MCKRDY))) { + timeout--; + if (timeout == 0) + break; + } +} + +void at91_mck_init(u32 mckr) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + int timeout = AT91_PLL_LOCK_TIMEOUT; + u32 tmp; + + tmp = readl(&pmc->mckr); + tmp &= ~(AT91_PMC_MCKR_PRES_MASK | + AT91_PMC_MCKR_MDIV_MASK | + AT91_PMC_MCKR_PLLADIV_MASK | + AT91_PMC_MCKR_CSS_MASK); + tmp |= mckr & (AT91_PMC_MCKR_PRES_MASK | + AT91_PMC_MCKR_MDIV_MASK | + AT91_PMC_MCKR_PLLADIV_MASK | + AT91_PMC_MCKR_CSS_MASK); + writel(tmp, &pmc->mckr); + + while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) { + timeout--; + if (timeout == 0) + break; + } +} + +void at91_periph_clk_enable(int id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + writel(1 << id, &pmc->pcer); +} diff --git a/arch/arm/mach-at91/arm926ejs/cpu.c b/arch/arm/mach-at91/arm926ejs/cpu.c new file mode 100644 index 0000000000..da1d35907e --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/cpu.c @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2010 + * Reinhard Meyer, reinhard.meyer@emk-elektronik.de + * (C) Copyright 2009 + * Jean-Christophe PLAGNIOL-VILLARD + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK +#define CONFIG_SYS_AT91_MAIN_CLOCK 0 +#endif + +int arch_cpu_init(void) +{ + return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); +} + +void arch_preboot_os(void) +{ + ulong cpiv; + at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT; + + cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir)); + + /* + * Disable PITC + * Add 0x1000 to current counter to stop it faster + * without waiting for wrapping back to 0 + */ + writel(cpiv + 0x1000, &pit->mr); +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + char buf[32]; + + printf("CPU: %s\n", ATMEL_CPU_NAME); + printf("Crystal frequency: %8s MHz\n", + strmhz(buf, get_main_clk_rate())); + printf("CPU clock : %8s MHz\n", + strmhz(buf, get_cpu_clk_rate())); + printf("Master clock : %8s MHz\n", + strmhz(buf, get_mck_clk_rate())); + + return 0; +} +#endif diff --git a/arch/arm/mach-at91/arm926ejs/eflash.c b/arch/arm/mach-at91/arm926ejs/eflash.c new file mode 100644 index 0000000000..3f39264289 --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/eflash.c @@ -0,0 +1,254 @@ +/* + * (C) Copyright 2010 + * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * this driver supports the enhanced embedded flash in the Atmel + * AT91SAM9XE devices with the following geometry: + * + * AT91SAM9XE128: 1 plane of 8 regions of 32 pages (total 256 pages) + * AT91SAM9XE256: 1 plane of 16 regions of 32 pages (total 512 pages) + * AT91SAM9XE512: 1 plane of 32 regions of 32 pages (total 1024 pages) + * (the exact geometry is read from the flash at runtime, so any + * future devices should already be covered) + * + * Regions can be write/erase protected. + * Whole (!) pages can be individually written with erase on the fly. + * Writing partial pages will corrupt the rest of the page. + * + * The flash is presented to u-boot with each region being a sector, + * having the following effects: + * Each sector can be hardware protected (protect on/off). + * Each page in a sector can be rewritten anytime. + * Since pages are erased when written, the "erase" does nothing. + * The first "CONFIG_EFLASH_PROTSECTORS" cannot be unprotected + * by u-Boot commands. + * + * Note: Redundant environment will not work in this flash since + * it does use partial page writes. Make sure the environment spans + * whole pages! + */ + +/* + * optional TODOs (nice to have features): + * + * make the driver coexist with other NOR flash drivers + * (use an index into flash_info[], requires work + * in those other drivers, too) + * Make the erase command fill the sectors with 0xff + * (if the flashes grow larger in the future and + * someone puts a jffs2 into them) + * do a read-modify-write for partially programmed pages + */ +#include +#include +#include +#include +#include +#include + +/* checks to detect configuration errors */ +#if CONFIG_SYS_MAX_FLASH_BANKS!=1 +#error eflash: this driver can only handle 1 bank +#endif + +/* global structure */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; +static u32 pagesize; + +unsigned long flash_init (void) +{ + at91_eefc_t *eefc = (at91_eefc_t *) ATMEL_BASE_EEFC; + at91_dbu_t *dbu = (at91_dbu_t *) ATMEL_BASE_DBGU; + u32 id, size, nplanes, planesize, nlocks; + u32 addr, i, tmp=0; + + debug("eflash: init\n"); + + flash_info[0].flash_id = FLASH_UNKNOWN; + + /* check if its an AT91ARM9XE SoC */ + if ((readl(&dbu->cidr) & AT91_DBU_CID_ARCH_MASK) != AT91_DBU_CID_ARCH_9XExx) { + puts("eflash: not an AT91SAM9XE\n"); + return 0; + } + + /* now query the eflash for its structure */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GETD, &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + id = readl(&eefc->frr); /* word 0 */ + size = readl(&eefc->frr); /* word 1 */ + pagesize = readl(&eefc->frr); /* word 2 */ + nplanes = readl(&eefc->frr); /* word 3 */ + planesize = readl(&eefc->frr); /* word 4 */ + debug("id=%08x size=%u pagesize=%u planes=%u planesize=%u\n", + id, size, pagesize, nplanes, planesize); + for (i=1; ifrr); /* words 5..4+nplanes-1 */ + }; + nlocks = readl(&eefc->frr); /* word 4+nplanes */ + debug("nlocks=%u\n", nlocks); + /* since we are going to use the lock regions as sectors, check count */ + if (nlocks > CONFIG_SYS_MAX_FLASH_SECT) { + printf("eflash: number of lock regions(%u) "\ + "> CONFIG_SYS_MAX_FLASH_SECT. reducing...\n", + nlocks); + nlocks = CONFIG_SYS_MAX_FLASH_SECT; + } + flash_info[0].size = size; + flash_info[0].sector_count = nlocks; + flash_info[0].flash_id = id; + + addr = ATMEL_BASE_FLASH; + for (i=0; ifrr); /* words 4+nplanes+1.. */ + flash_info[0].start[i] = addr; + flash_info[0].protect[i] = 0; + addr += tmp; + }; + + /* now read the protection information for all regions */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + for (i=0; ifrr); + flash_info[0].protect[i] = (tmp >> (i%32)) & 1; +#if defined(CONFIG_EFLASH_PROTSECTORS) + if (i < CONFIG_EFLASH_PROTSECTORS) + flash_info[0].protect[i] = 1; +#endif + } + + return size; +} + +void flash_print_info (flash_info_t *info) +{ + int i; + + puts("AT91SAM9XE embedded flash\n Size: "); + print_size(info->size, " in "); + printf("%d Sectors\n", info->sector_count); + + printf(" Sector Start Addresses:"); + for (i=0; isector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); + return; +} + +int flash_real_protect (flash_info_t *info, long sector, int prot) +{ + at91_eefc_t *eefc = (at91_eefc_t *) ATMEL_BASE_EEFC; + u32 pagenum = (info->start[sector]-ATMEL_BASE_FLASH)/pagesize; + u32 i, tmp=0; + + debug("protect sector=%ld prot=%d\n", sector, prot); + +#if defined(CONFIG_EFLASH_PROTSECTORS) + if (sector < CONFIG_EFLASH_PROTSECTORS) { + if (!prot) { + printf("eflash: sector %lu cannot be unprotected\n", + sector); + } + return 1; /* return anyway, caller does not care for result */ + } +#endif + if (prot) { + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_SLB | + (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); + } else { + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_CLB | + (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); + } + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + /* now re-read the protection information for all regions */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + for (i=0; isector_count; i++) { + if (i%32 == 0) + tmp = readl(&eefc->frr); + info->protect[i] = (tmp >> (i%32)) & 1; + } + return 0; +} + +static u32 erase_write_page (u32 pagenum) +{ + at91_eefc_t *eefc = (at91_eefc_t *) ATMEL_BASE_EEFC; + + debug("erase+write page=%u\n", pagenum); + + /* give erase and write page command */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_EWP | + (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + /* return status */ + return readl(&eefc->fsr) + & (AT91_EEFC_FSR_FCMDE | AT91_EEFC_FSR_FLOCKE); +} + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + debug("erase first=%d last=%d\n", s_first, s_last); + puts("this flash does not need and support erasing!\n"); + return 0; +} + +/* + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + u32 pagenum; + u32 *src32, *dst32; + u32 i; + + debug("write src=%08lx addr=%08lx cnt=%lx\n", + (ulong)src, addr, cnt); + + /* REQUIRE addr to be on a page start, abort if not */ + if (addr % pagesize) { + printf ("eflash: start %08lx is not on page start\n"\ + " write aborted\n", addr); + return 1; + } + + /* now start copying data */ + pagenum = (addr-ATMEL_BASE_FLASH)/pagesize; + src32 = (u32 *) src; + dst32 = (u32 *) addr; + while (cnt > 0) { + i = pagesize / 4; + /* fill page buffer */ + while (i--) + *dst32++ = *src32++; + /* write page */ + if (erase_write_page(pagenum)) + return 1; + pagenum++; + if (cnt > pagesize) + cnt -= pagesize; + else + cnt = 0; + } + return 0; +} diff --git a/arch/arm/mach-at91/arm926ejs/led.c b/arch/arm/mach-at91/arm926ejs/led.c new file mode 100644 index 0000000000..b8d5c785df --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/led.c @@ -0,0 +1,48 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#ifdef CONFIG_RED_LED +void red_led_on(void) +{ + gpio_set_value(CONFIG_RED_LED, 1); +} + +void red_led_off(void) +{ + gpio_set_value(CONFIG_RED_LED, 0); +} +#endif + +#ifdef CONFIG_GREEN_LED +void green_led_on(void) +{ + gpio_set_value(CONFIG_GREEN_LED, 0); +} + +void green_led_off(void) +{ + gpio_set_value(CONFIG_GREEN_LED, 1); +} +#endif + +#ifdef CONFIG_YELLOW_LED +void yellow_led_on(void) +{ + gpio_set_value(CONFIG_YELLOW_LED, 0); +} + +void yellow_led_off(void) +{ + gpio_set_value(CONFIG_YELLOW_LED, 1); +} +#endif diff --git a/arch/arm/mach-at91/arm926ejs/lowlevel_init.S b/arch/arm/mach-at91/arm926ejs/lowlevel_init.S new file mode 100644 index 0000000000..a9ec81a75c --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/lowlevel_init.S @@ -0,0 +1,246 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_ATMEL_LEGACY +#include +#endif +#ifndef CONFIG_SYS_MATRIX_EBICSA_VAL +#define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL +#endif + +.globl lowlevel_init +.type lowlevel_init,function +lowlevel_init: + +POS1: + adr r5, POS1 /* r5 = POS1 run time */ + ldr r0, =POS1 /* r0 = POS1 compile */ + sub r5, r5, r0 /* r0 = CONFIG_SYS_TEXT_BASE-1 */ + + /* memory control configuration 1 */ + ldr r0, =SMRDATA + ldr r2, =SMRDATA1 + add r0, r0, r5 + add r2, r2, r5 +0: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 0b + +/* ---------------------------------------------------------------------------- + * PMC Init Step 1. + * ---------------------------------------------------------------------------- + * - Check if the PLL is already initialized + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_ASM_PMC_MCKR) + ldr r0, [r1] + and r0, r0, #3 + cmp r0, #0 + bne PLL_setup_end + +/* --------------------------------------------------------------------------- + * - Enable the Main Oscillator + * --------------------------------------------------------------------------- + */ + ldr r1, =(AT91_ASM_PMC_MOR) + ldr r2, =(AT91_ASM_PMC_SR) + /* Main oscillator Enable register PMC_MOR: */ + ldr r0, =CONFIG_SYS_MOR_VAL + str r0, [r1] + + /* Reading the PMC Status to detect when the Main Oscillator is enabled */ + mov r4, #AT91_PMC_IXR_MOSCS +MOSCS_Loop: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_IXR_MOSCS + bne MOSCS_Loop + +/* ---------------------------------------------------------------------------- + * PMC Init Step 2. + * ---------------------------------------------------------------------------- + * Setup PLLA + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_ASM_PMC_PLLAR) + ldr r0, =CONFIG_SYS_PLLAR_VAL + str r0, [r1] + + /* Reading the PMC Status register to detect when the PLLA is locked */ + mov r4, #AT91_PMC_IXR_LOCKA +MOSCS_Loop1: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_IXR_LOCKA + bne MOSCS_Loop1 + +/* ---------------------------------------------------------------------------- + * PMC Init Step 3. + * ---------------------------------------------------------------------------- + * - Switch on the Main Oscillator + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_ASM_PMC_MCKR) + + /* -Master Clock Controller register PMC_MCKR */ + ldr r0, =CONFIG_SYS_MCKR1_VAL + str r0, [r1] + + /* Reading the PMC Status to detect when the Master clock is ready */ + mov r4, #AT91_PMC_IXR_MCKRDY +MCKRDY_Loop: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_IXR_MCKRDY + bne MCKRDY_Loop + + ldr r0, =CONFIG_SYS_MCKR2_VAL + str r0, [r1] + + /* Reading the PMC Status to detect when the Master clock is ready */ + mov r4, #AT91_PMC_IXR_MCKRDY +MCKRDY_Loop1: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_IXR_MCKRDY + bne MCKRDY_Loop1 +PLL_setup_end: + +/* ---------------------------------------------------------------------------- + * - memory control configuration 2 + * ---------------------------------------------------------------------------- + */ + ldr r0, =(AT91_ASM_SDRAMC_TR) + ldr r1, [r0] + cmp r1, #0 + bne SDRAM_setup_end + + ldr r0, =SMRDATA1 + ldr r2, =SMRDATA2 + add r0, r0, r5 + add r2, r2, r5 +2: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 2b + +SDRAM_setup_end: + /* everything is fine now */ + mov pc, lr + + .ltorg + +SMRDATA: + .word AT91_ASM_WDT_MR + .word CONFIG_SYS_WDTC_WDMR_VAL + /* configure PIOx as EBI0 D[16-31] */ +#if defined(CONFIG_AT91SAM9263) + .word AT91_ASM_PIOD_PDR + .word CONFIG_SYS_PIOD_PDR_VAL1 + .word AT91_ASM_PIOD_PUDR + .word CONFIG_SYS_PIOD_PPUDR_VAL + .word AT91_ASM_PIOD_ASR + .word CONFIG_SYS_PIOD_PPUDR_VAL +#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) \ + || defined(CONFIG_AT91SAM9G20) + .word AT91_ASM_PIOC_PDR + .word CONFIG_SYS_PIOC_PDR_VAL1 + .word AT91_ASM_PIOC_PUDR + .word CONFIG_SYS_PIOC_PPUDR_VAL +#endif + .word AT91_ASM_MATRIX_CSA0 + .word CONFIG_SYS_MATRIX_EBICSA_VAL + + /* flash */ + .word AT91_ASM_SMC_MODE0 + .word CONFIG_SYS_SMC0_MODE0_VAL + + .word AT91_ASM_SMC_CYCLE0 + .word CONFIG_SYS_SMC0_CYCLE0_VAL + + .word AT91_ASM_SMC_PULSE0 + .word CONFIG_SYS_SMC0_PULSE0_VAL + + .word AT91_ASM_SMC_SETUP0 + .word CONFIG_SYS_SMC0_SETUP0_VAL + +SMRDATA1: + .word AT91_ASM_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL1 + .word AT91_ASM_SDRAMC_TR + .word CONFIG_SYS_SDRC_TR_VAL1 + .word AT91_ASM_SDRAMC_CR + .word CONFIG_SYS_SDRC_CR_VAL + .word AT91_ASM_SDRAMC_MDR + .word CONFIG_SYS_SDRC_MDR_VAL + .word AT91_ASM_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL2 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL1 + .word AT91_ASM_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL3 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL2 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL3 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL4 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL5 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL6 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL7 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL8 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL9 + .word AT91_ASM_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL4 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL10 + .word AT91_ASM_SDRAMC_MR + .word CONFIG_SYS_SDRC_MR_VAL5 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL11 + .word AT91_ASM_SDRAMC_TR + .word CONFIG_SYS_SDRC_TR_VAL2 + .word CONFIG_SYS_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL12 + /* User reset enable*/ + .word AT91_ASM_RSTC_MR + .word CONFIG_SYS_RSTC_RMR_VAL +#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP + /* MATRIX_MCFG - REMAP all masters */ + .word AT91_ASM_MATRIX_MCFG + .word 0x1FF +#endif +SMRDATA2: + .word 0 diff --git a/arch/arm/mach-at91/arm926ejs/reset.c b/arch/arm/mach-at91/arm926ejs/reset.c new file mode 100644 index 0000000000..e67f47bd04 --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/reset.c @@ -0,0 +1,29 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +/* Reset the cpu by telling the reset controller to do so */ +void reset_cpu(ulong ignored) +{ + at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC; + + writel(AT91_RSTC_KEY + | AT91_RSTC_CR_PROCRST /* Processor Reset */ + | AT91_RSTC_CR_PERRST /* Peripheral Reset */ +#ifdef CONFIG_AT91RESET_EXTRST + | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */ +#endif + , &rstc->cr); + /* never reached */ + while (1) + ; +} diff --git a/arch/arm/mach-at91/arm926ejs/timer.c b/arch/arm/mach-at91/arm926ejs/timer.c new file mode 100644 index 0000000000..b0b7fb93fb --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/timer.c @@ -0,0 +1,120 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by + * setting the 20 bit counter period to its maximum (0xfffff). + * (See the relevant data sheets to understand that this really works) + * + * We do also mimic the typical powerpc way of incrementing + * two 32 bit registers called tbl and tbu. + * + * Those registers increment at 1/16 the main clock rate. + */ + +#define TIMER_LOAD_VAL 0xfffff + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, gd->arch.timer_rate_hz); + + return tick; +} + +static inline unsigned long long usec_to_tick(unsigned long long usec) +{ + usec *= gd->arch.timer_rate_hz; + do_div(usec, 1000000); + + return usec; +} + +/* + * Use the PITC in full 32 bit incrementing mode + */ +int timer_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT; + + /* Enable PITC Clock */ + writel(1 << ATMEL_ID_SYS, &pmc->pcer); + + /* Enable PITC */ + writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); + + gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16; + gd->arch.tbu = gd->arch.tbl = 0; + + return 0; +} + +/* + * Get the current 64 bit timer tick count + */ +unsigned long long get_ticks(void) +{ + at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT; + + ulong now = readl(&pit->piir); + + /* increment tbu if tbl has rolled over */ + if (now < gd->arch.tbl) + gd->arch.tbu++; + gd->arch.tbl = now; + return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; +} + +void __udelay(unsigned long usec) +{ + unsigned long long start; + ulong tmo; + + start = get_ticks(); /* get current timestamp */ + tmo = usec_to_tick(usec); /* convert usecs to ticks */ + while ((get_ticks() - start) < tmo) + ; /* loop till time has passed */ +} + +/* + * get_timer(base) can be used to check for timeouts or + * to measure elasped time relative to an event: + * + * ulong start_time = get_timer(0) sets start_time to the current + * time value. + * get_timer(start_time) returns the time elapsed since then. + * + * The time is used in CONFIG_SYS_HZ units! + */ +ulong get_timer(ulong base) +{ + return tick_to_time(get_ticks()) - base; +} + +/* + * Return the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return gd->arch.timer_rate_hz; +} -- cgit v1.2.1