From 939911a64bdf3594651e041f3b24a93b8a380643 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 16 May 2014 13:02:24 -0400 Subject: armv7:TI: Add and migrate omap_hw_init_context The omap_hw_init_context function (and assorted helpers) is the same for all OMAP-derived parts as when CHSETTINGS are used, that's the same and our DDR base is also always the same. In order to make this common we simply need to update the names of the define for DDR address space which is also common. Cc: Sricharan R. Cc: Lokesh Vutla Signed-off-by: Tom Rini Reviewed-by: Lokesh Vutla --- arch/arm/include/asm/arch-am33xx/sys_proto.h | 1 + arch/arm/include/asm/arch-omap4/sys_proto.h | 51 +------------------- arch/arm/include/asm/arch-omap5/omap.h | 5 -- arch/arm/include/asm/arch-omap5/sys_proto.h | 50 +------------------ arch/arm/include/asm/omap_common.h | 6 --- arch/arm/include/asm/ti-common/sys_proto.h | 72 ++++++++++++++++++++++++++++ 6 files changed, 75 insertions(+), 110 deletions(-) create mode 100644 arch/arm/include/asm/ti-common/sys_proto.h (limited to 'arch/arm/include') diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 91ff2ad0e4..33a82fca98 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -11,6 +11,7 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ #include +#include #include #define BOARD_REV_ID 0x0 diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index 80172f3794..83d858f305 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -14,6 +14,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -53,54 +54,4 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); void setup_warmreset_time(void); - -static inline u32 running_from_sdram(void) -{ - u32 pc; - asm volatile ("mov %0, pc" : "=r" (pc)); - return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) && - (pc < OMAP44XX_DRAM_ADDR_SPACE_END)); -} - -static inline u8 uboot_loaded_by_spl(void) -{ - /* - * u-boot can be running from sdram either because of configuration - * Header or by SPL. If because of CH, then the romcode sets the - * CHSETTINGS executed bit to true in the boot parameter structure that - * it passes to the bootloader.This parameter is stored in the ch_flags - * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a - * mandatory section if CH is present. - */ - if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) - return 0; - else - return running_from_sdram(); -} -/* - * The basic hardware init of OMAP(s_init()) can happen in 4 - * different contexts: - * 1. SPL running from SRAM - * 2. U-Boot running from FLASH - * 3. Non-XIP U-Boot loaded to SDRAM by SPL - * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the - * Configuration Header feature - * - * This function finds this context. - * Defining as inline may help in compiling out unused functions in SPL - */ -static inline u32 omap_hw_init_context(void) -{ -#ifdef CONFIG_SPL_BUILD - return OMAP_INIT_CONTEXT_SPL; -#else - if (uboot_loaded_by_spl()) - return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL; - else if (running_from_sdram()) - return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH; - else - return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR; -#endif -} - #endif diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index ce13ca93bb..b9600cf42d 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -23,11 +23,6 @@ #define OMAP54XX_L4_WKUP_BASE 0x4Ae00000 #define OMAP54XX_L4_PER_BASE 0x48000000 -#define OMAP54XX_DRAM_ADDR_SPACE_START 0x80000000 -#define OMAP54XX_DRAM_ADDR_SPACE_END 0xFFFFFFFF -#define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START -#define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END - /* CONTROL ID CODE */ #define CONTROL_CORE_ID_CODE 0x4A002204 #define CONTROL_WKUP_ID_CODE 0x4AE0C204 diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index bf12c73372..103830319a 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -14,6 +14,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -56,55 +57,6 @@ void get_ioregs(const struct ctrl_ioregs **regs); void srcomp_enable(void); void setup_warmreset_time(void); -static inline u32 running_from_sdram(void) -{ - u32 pc; - asm volatile ("mov %0, pc" : "=r" (pc)); - return ((pc >= OMAP54XX_DRAM_ADDR_SPACE_START) && - (pc < OMAP54XX_DRAM_ADDR_SPACE_END)); -} - -static inline u8 uboot_loaded_by_spl(void) -{ - /* - * u-boot can be running from sdram either because of configuration - * Header or by SPL. If because of CH, then the romcode sets the - * CHSETTINGS executed bit to true in the boot parameter structure that - * it passes to the bootloader.This parameter is stored in the ch_flags - * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a - * mandatory section if CH is present. - */ - if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) - return 0; - else - return running_from_sdram(); -} -/* - * The basic hardware init of OMAP(s_init()) can happen in 4 - * different contexts: - * 1. SPL running from SRAM - * 2. U-Boot running from FLASH - * 3. Non-XIP U-Boot loaded to SDRAM by SPL - * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the - * Configuration Header feature - * - * This function finds this context. - * Defining as inline may help in compiling out unused functions in SPL - */ -static inline u32 omap_hw_init_context(void) -{ -#ifdef CONFIG_SPL_BUILD - return OMAP_INIT_CONTEXT_SPL; -#else - if (uboot_loaded_by_spl()) - return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL; - else if (running_from_sdram()) - return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH; - else - return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR; -#endif -} - static inline u32 div_round_up(u32 num, u32 den) { return (num + den - 1)/den; diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index d1dd4b5368..d1344ee94c 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -576,12 +576,6 @@ s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb); void usb_fake_mac_from_die_id(u32 *id); -/* HW Init Context */ -#define OMAP_INIT_CONTEXT_SPL 0 -#define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR 1 -#define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2 -#define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3 - /* ABB */ #define OMAP_ABB_NOMINAL_OPP 0 #define OMAP_ABB_FAST_OPP 1 diff --git a/arch/arm/include/asm/ti-common/sys_proto.h b/arch/arm/include/asm/ti-common/sys_proto.h new file mode 100644 index 0000000000..d3ab75fa32 --- /dev/null +++ b/arch/arm/include/asm/ti-common/sys_proto.h @@ -0,0 +1,72 @@ +/* + * (C) Copyright 2014 + * Texas Instruments, + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _TI_COMMON_SYS_PROTO_H_ +#define _TI_COMMON_SYS_PROTO_H_ + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_OMAP_COMMON +#define TI_ARMV7_DRAM_ADDR_SPACE_START 0x80000000 +#define TI_ARMV7_DRAM_ADDR_SPACE_END 0xFFFFFFFF + +#define OMAP_INIT_CONTEXT_SPL 0 +#define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR 1 +#define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2 +#define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3 + +static inline u32 running_from_sdram(void) +{ + u32 pc; + asm volatile ("mov %0, pc" : "=r" (pc)); + return ((pc >= TI_ARMV7_DRAM_ADDR_SPACE_START) && + (pc < TI_ARMV7_DRAM_ADDR_SPACE_END)); +} + +static inline u8 uboot_loaded_by_spl(void) +{ + /* + * u-boot can be running from sdram either because of configuration + * Header or by SPL. If because of CH, then the romcode sets the + * CHSETTINGS executed bit to true in the boot parameter structure that + * it passes to the bootloader.This parameter is stored in the ch_flags + * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a + * mandatory section if CH is present. + */ + if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) + return 0; + else + return running_from_sdram(); +} + +/* + * The basic hardware init of OMAP(s_init()) can happen in 4 + * different contexts: + * 1. SPL running from SRAM + * 2. U-Boot running from FLASH + * 3. Non-XIP U-Boot loaded to SDRAM by SPL + * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the + * Configuration Header feature + * + * This function finds this context. + * Defining as inline may help in compiling out unused functions in SPL + */ +static inline u32 omap_hw_init_context(void) +{ +#ifdef CONFIG_SPL_BUILD + return OMAP_INIT_CONTEXT_SPL; +#else + if (uboot_loaded_by_spl()) + return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL; + else if (running_from_sdram()) + return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH; + else + return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR; +#endif +} +#endif + +#endif -- cgit v1.2.1