From d25ba89e8b2b80c7229658b9fabdf96e9af64e01 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Sat, 19 Dec 2015 23:29:25 +0200 Subject: arm: lpc32xx: switch serial console to driver model On NXP LPC32xx platform for non-SPL builds the change adds standard (NS16550) and high-speed UARTs to driver model. Due to specific of DM NS16550 device description UART clock can not be got in runtime and by default it is set to 13MHz, if board PERIPH_CLK is different, this should be specified in board configuration file. For SPL builds HSUARTs are disabled and non-DM NS16550 driver is compiled, if needed. The change also updates default configs of devkit3250 and work_92105 boards to reflect updates in platform files. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Simon Glass --- arch/arm/include/asm/arch-lpc32xx/config.h | 33 ++++++++++++++++-------------- 1 file changed, 18 insertions(+), 15 deletions(-) (limited to 'arch/arm/include/asm/arch-lpc32xx') diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h index d76514e4cb..27e60e1cea 100644 --- a/arch/arm/include/asm/arch-lpc32xx/config.h +++ b/arch/arm/include/asm/arch-lpc32xx/config.h @@ -16,18 +16,21 @@ #define CONFIG_NR_DRAM_BANKS_MAX 2 /* UART configuration */ -#if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6) -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_CONS_INDEX (CONFIG_SYS_LPC32XX_UART - 2) -#elif (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \ +#if (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \ (CONFIG_SYS_LPC32XX_UART == 7) -#define CONFIG_LPC32XX_HSUART -#else -#error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7" +#if defined(CONFIG_SPL_BUILD) +/* SPL images do not support LPC32xx HSUART, UART5 is selected for SPL */ +#undef CONFIG_SYS_LPC32XX_UART +#define CONFIG_SYS_LPC32XX_UART 5 #endif -#if defined(CONFIG_SYS_NS16550_SERIAL) +#if !defined(CONFIG_LPC32XX_HSUART) +#define CONFIG_LPC32XX_HSUART +#endif +#endif +#if defined(CONFIG_SPL_BUILD) +#define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_CLK get_serial_clock() @@ -37,14 +40,14 @@ #define CONFIG_SYS_NS16550_COM4 UART6_BASE #endif -#if defined(CONFIG_LPC32XX_HSUART) -#if CONFIG_SYS_LPC32XX_UART == 1 -#define HS_UART_BASE HS_UART1_BASE -#elif CONFIG_SYS_LPC32XX_UART == 2 -#define HS_UART_BASE HS_UART2_BASE -#else /* CONFIG_SYS_LPC32XX_UART == 7 */ -#define HS_UART_BASE HS_UART7_BASE +#if !defined(CONFIG_SYS_NS16550_CLK) +#define CONFIG_SYS_NS16550_CLK 13000000 #endif + +#if !defined(CONFIG_LPC32XX_HSUART) || defined(CONFIG_SPL_BUILD) +#define CONFIG_CONS_INDEX (CONFIG_SYS_LPC32XX_UART - 2) +#else +#define CONFIG_CONS_INDEX CONFIG_SYS_LPC32XX_UART #endif #define CONFIG_SYS_BAUDRATE_TABLE \ -- cgit v1.2.1