From 3ad24802aaf7293d242f21f590c615b148d2562b Mon Sep 17 00:00:00 2001 From: Asen Dimov Date: Tue, 26 Jul 2011 01:23:39 +0000 Subject: AT91: change common at91sam9261 files to compile with new scheme Signed-off-by: Asen Dimov Signed-off-by: Reinhard Meyer --- arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 76 +++++++++++------------ 1 file changed, 36 insertions(+), 40 deletions(-) (limited to 'arch/arm/cpu') diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c index b4353ef5cb..edc797214c 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c @@ -23,77 +23,73 @@ */ #include +#include #include #include #include -#include + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */ - writel(1 << AT91SAM9261_ID_US0, &pmc->pcer); + writel(1 << ATMEL_ID_USART0, &pmc->pcer); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */ at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */ - writel(1 << AT91SAM9261_ID_US1, &pmc->pcer); + writel(1 << ATMEL_ID_USART1, &pmc->pcer); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */ at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */ - writel(1 << AT91SAM9261_ID_US2, &pmc->pcer); + writel(1 << ATMEL_ID_USART2, &pmc->pcer); } -void at91_serial3_hw_init(void) +void at91_seriald_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ - writel(1 << AT91_ID_SYS, &pmc->pcer); -} - -void at91_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_serial0_hw_init(); -#endif - -#ifdef CONFIG_USART1 - at91_serial1_hw_init(); -#endif - -#ifdef CONFIG_USART2 - at91_serial2_hw_init(); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_serial3_hw_init(); -#endif + writel(1 << ATMEL_ID_SYS, &pmc->pcer); } -#ifdef CONFIG_HAS_DATAFLASH +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */ + at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ /* Enable clock */ - writel(1 << AT91SAM9261_ID_SPI0, &pmc->pcer); + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTA, 3, 1); @@ -123,14 +119,14 @@ void at91_spi0_hw_init(unsigned long cs_mask) void at91_spi1_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 31, 0); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 29, 0); /* SPI1_SPCK */ + at91_set_a_periph(AT91_PIO_PORTB, 30, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 31, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 29, PUP); /* SPI1_SPCK */ /* Enable clock */ - writel(1 << AT91SAM9261_ID_SPI1, &pmc->pcer); + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTB, 28, 1); -- cgit v1.2.1