From b2d5ac59859fa946e47fb6ab1f4f3486d4988680 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 24 Mar 2015 13:25:02 -0700 Subject: armv8/ls2085aqds: NAND boot support This adds NAND boot support for LS2085AQDS, using SPL framework. Details of forming NAND image can be found in README. Signed-off-by: Scott Wood [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: York Sun --- arch/arm/cpu/armv8/fsl-lsch3/README | 38 +++++++++++++++++++++++++++++ arch/arm/cpu/armv8/fsl-lsch3/soc.c | 48 +++++++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+) (limited to 'arch/arm/cpu/armv8/fsl-lsch3') diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README index 4f36e2a605..15a1549e56 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/README +++ b/arch/arm/cpu/armv8/fsl-lsch3/README @@ -95,3 +95,41 @@ mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined mcmemsize: MC DRAM block size. If this variable is not defined, the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. + +Booting from NAND +------------------- +Booting from NAND requires two images, RCW and u-boot-with-spl.bin. +The difference between NAND boot RCW image and NOR boot image is the PBI +command sequence. Below is one example for PBI commands for QDS which uses +NAND device with 2KB/page, block size 128KB. + +1) CCSR 4-byte write to 0x00e00404, data=0x00000000 +2) CCSR 4-byte write to 0x00e00400, data=0x1800a000 +The above two commands set bootloc register to 0x00000000_1800a000 where +the u-boot code will be running in OCRAM. + +3) Block Copy: SRC=0x0107, SRC_ADDR=0x00020000, DEST_ADDR=0x1800a000, +BLOCK_SIZE=0x00014000 +This command copies u-boot image from NAND device into OCRAM. The values need +to adjust accordingly. + +SRC should match the cfg_rcw_src, the reset config pins. It depends + on the NAND device. See reference manual for cfg_rcw_src. +SRC_ADDR is the offset of u-boot-with-spl.bin image in NAND device. In + the example above, 128KB. For easy maintenance, we put it at + the beginning of next block from RCW. +DEST_ADDR is fixed at 0x1800a000, matching bootloc set above. +BLOCK_SIZE is the size to be copied by PBI. + +RCW image should be written to the beginning of NAND device. Example of using +u-boot command + +nand write 0 + +To form the NAND image, build u-boot with NAND config, for example, +ls2085aqds_nand_defconfig. The image needed is u-boot-with-spl.bin. +The u-boot image should be written to match SRC_ADDR, in above example 0x20000. + +nand write 200000 + +With these two images in NAND device, the board can boot from NAND. diff --git a/arch/arm/cpu/armv8/fsl-lsch3/soc.c b/arch/arm/cpu/armv8/fsl-lsch3/soc.c index 17700ef94e..ca00108e40 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/soc.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/soc.c @@ -6,8 +6,13 @@ #include #include +#include +#include #include #include +#include + +DECLARE_GLOBAL_DATA_PTR; static void erratum_a008751(void) { @@ -18,8 +23,51 @@ static void erratum_a008751(void) #endif } +static void erratum_rcw_src(void) +{ +#if defined(CONFIG_SPL) + u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; + u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE; + u32 val; + + val = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4); + val &= ~DCFG_PORSR1_RCW_SRC; + val |= DCFG_PORSR1_RCW_SRC_NOR; + out_le32(dcfg_dcsr + DCFG_DCSR_PORCR1 / 4, val); +#endif +} + void fsl_lsch3_early_init_f(void) { erratum_a008751(); + erratum_rcw_src(); init_early_memctl_regs(); /* tighten IFC timing */ } + +#ifdef CONFIG_SPL_BUILD +void board_init_f(ulong dummy) +{ + /* Clear global data */ + memset((void *)gd, 0, sizeof(gd_t)); + + arch_cpu_init(); + board_early_init_f(); + timer_init(); + env_init(); + gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); + + serial_init(); + console_init_f(); + dram_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + board_init_r(NULL, 0); +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_NAND; +} +#endif -- cgit v1.2.1