From 4c425570214cac091d9bdcf840b936062fb8da12 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 27 Feb 2015 02:26:42 +0900 Subject: ARM: UniPhier: move SoC sources to mach-uniphier Move arch/arm/cpu/armv7/uniphier/* -> arch/arm/mach-uniphier/* Signed-off-by: Masahiro Yamada --- arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 14 -- arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c | 66 -------- arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c | 29 ---- arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c | 70 --------- .../cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S | 39 ----- arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c | 52 ------- arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c | 24 --- arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c | 168 --------------------- .../arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c | 18 --- arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c | 75 --------- arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c | 28 ---- arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c | 157 ------------------- 12 files changed, 740 deletions(-) delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c delete mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c (limited to 'arch/arm/cpu/armv7/uniphier/ph1-pro4') diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile deleted file mode 100644 index e330fda1ed..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += sbc_init.o sg_init.o pll_init.o clkrst_init.o \ - pll_spectrum.o umc_init.o ddrphy_init.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o -obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c deleted file mode 100644 index c31b74badd..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -struct boot_device_info boot_device_table[] = { - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, EraseSize 1MB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, EraseSize 1MB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, EraseSize 512KB, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 4, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, - {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 24, ONFI, Addr 5)"}, - {BOOT_DEVICE_MMC1, "eMMC Boot (3.3V)"}, - {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - {BOOT_DEVICE_NONE, "Reserved"}, - { /* sentinel */ } -}; - -int get_boot_mode_sel(void) -{ - return (readl(SG_PINMON0) >> 1) & 0x1f; -} - -u32 spl_boot_device(void) -{ - int boot_mode; - - if (boot_is_swapped()) - return BOOT_DEVICE_NOR; - - boot_mode = get_boot_mode_sel(); - - return boot_device_table[boot_mode].type; -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c deleted file mode 100644 index 18965a94c5..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void clkrst_init(void) -{ - u32 tmp; - - /* deassert reset */ - tmp = readl(SC_RSTCTRL); - tmp |= SC_RSTCTRL_NRST_ETHER | SC_RSTCTRL_NRST_UMC1 - | SC_RSTCTRL_NRST_UMC0 | SC_RSTCTRL_NRST_NAND; - writel(tmp, SC_RSTCTRL); - readl(SC_RSTCTRL); /* dummy read */ - - /* privide clocks */ - tmp = readl(SC_CLKCTRL); - tmp |= SC_CLKCTRL_CLK_ETHER | SC_CLKCTRL_CLK_MIO | SC_CLKCTRL_CLK_UMC - | SC_CLKCTRL_CLK_NAND | SC_CLKCTRL_CLK_SBC | SC_CLKCTRL_CLK_PERI; - writel(tmp, SC_CLKCTRL); - readl(SC_CLKCTRL); /* dummy read */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c deleted file mode 100644 index c5d1f606cf..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/ddrphy_init.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) -{ - u32 tmp; - - writel(0x0300c473, &phy->pgcr[1]); - if (freq == 1333) { - writel(0x0a806844, &phy->ptr[0]); - writel(0x208e0124, &phy->ptr[1]); - } else { - writel(0x0c807d04, &phy->ptr[0]); - writel(0x2710015E, &phy->ptr[1]); - } - writel(0x00083DEF, &phy->ptr[2]); - if (freq == 1333) { - writel(0x0f051616, &phy->ptr[3]); - writel(0x06ae08d6, &phy->ptr[4]); - } else { - writel(0x12061A80, &phy->ptr[3]); - writel(0x08027100, &phy->ptr[4]); - } - writel(0xF004001A, &phy->dsgcr); - - /* change the value of the on-die pull-up/pull-down registors */ - tmp = readl(&phy->dxccr); - tmp &= ~0x0ee0; - tmp |= DXCCR_DQSNRES_688_OHM | DXCCR_DQSRES_688_OHM; - writel(tmp, &phy->dxccr); - - writel(0x0000040B, &phy->dcr); - if (freq == 1333) { - writel(0x85589955, &phy->dtpr[0]); - if (size == 1) - writel(0x1a8363c0, &phy->dtpr[1]); - else - writel(0x1a8363c0, &phy->dtpr[1]); - writel(0x5002c200, &phy->dtpr[2]); - writel(0x00000b51, &phy->mr0); - } else { - writel(0x999cbb66, &phy->dtpr[0]); - if (size == 1) - writel(0x1a878400, &phy->dtpr[1]); - else - writel(0x1a878400, &phy->dtpr[1]); - writel(0xa00214f8, &phy->dtpr[2]); - writel(0x00000d71, &phy->mr0); - } - writel(0x00000006, &phy->mr1); - if (freq == 1333) - writel(0x00000290, &phy->mr2); - else - writel(0x00000298, &phy->mr2); - - writel(0x00000000, &phy->mr3); - - while (!(readl(&phy->pgsr[0]) & PGSR0_IDONE)) - ; - - writel(0x0300C473, &phy->pgcr[1]); - writel(0x0000005D, &phy->zq[0].cr[1]); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S deleted file mode 100644 index a793b7c118..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#define UART_CLK 73728000 -#include - -ENTRY(setup_lowlevel_debug) - ldr r0, =SC_CLKCTRL - ldr r1, [r0] - orr r1, r1, #SC_CLKCTRL_CLK_PERI - str r1, [r0] - - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 127, 0, r0, r1 - set_pinsel 128, 0, r0, r1 - - ldr r0, =SG_LOADPINCTRL - mov r1, #1 - str r1, [r0] - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c deleted file mode 100644 index 4e3d47615b..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */ - sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */ - sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */ - sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */ - sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */ - sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */ - sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */ -#endif - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */ - sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */ - sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */ - sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */ - sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */ - sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */ - sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */ - sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */ - sg_set_pinsel(48, 0); /* NFALE -> NFALE */ - sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */ - sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */ - sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */ - sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ - sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ - sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ - sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ - sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ - sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ -#endif - - writel(1, SG_LOADPINCTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c deleted file mode 100644 index 31ee2a2100..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#define UART_MASTER_CLK 73728000 - -SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) -SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) -SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) -SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) - -struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { - { - .base = 0x5a800100, - }, - { - .base = 0x5a810100, - }, -}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c deleted file mode 100644 index 1db90f88a0..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#undef DPLL_SSC_RATE_1PER - -static void dpll_init(void) -{ - u32 tmp; - - /* - * Set Frequency - * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz) - * to FOUT ( DPLLCTRL.bit[29:20] ) - */ - tmp = readl(SC_DPLLCTRL); - tmp &= ~(0x000f0000); -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unsupported frequency" -#endif - - /* - * Set Moduration rate - * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15]) - */ -#if defined(DPLL_SSC_RATE_1PER) - tmp &= ~0x00008000; -#else - tmp |= 0x00008000; -#endif - writel(tmp, SC_DPLLCTRL); - - tmp = readl(SC_DPLLCTRL2); - tmp |= SC_DPLLCTRL2_NRSTDS; - writel(tmp, SC_DPLLCTRL2); -} - -static void stop_mpll(void) -{ - u32 tmp; - - tmp = readl(SC_MPLLOSCCTL); - - if (!(tmp & SC_MPLLOSCCTL_MPLLST)) - return; /* already stopped */ - - tmp &= ~SC_MPLLOSCCTL_MPLLEN; - writel(tmp, SC_MPLLOSCCTL); - - while (readl(SC_MPLLOSCCTL) & SC_MPLLOSCCTL_MPLLST) - ; -} - -static void vpll_init(void) -{ - u32 tmp, clk_mode_axosel; - - /* Set VPLL27A & VPLL27B */ - tmp = readl(SG_PINMON0); - clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; - -#if defined(CONFIG_MACH_PH1_PRO4) - /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) - return; -#endif - - /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp |= 0x00000001; - writel(tmp, SC_VPLL27BCTRL); - - /* Unset VPLA_K_LD and VPLB_K_LD bit */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Set VPLA_M and VPLB_M to 0x20 */ - tmp = readl(SC_VPLL27ACTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp &= ~0x0000007f; - tmp |= 0x00000020; - writel(tmp, SC_VPLL27BCTRL2); - - if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || - clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) { - /* Set VPLA_K and VPLB_K for AXO: 25MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066666; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x00066666; - writel(tmp, SC_VPLL27BCTRL3); - } else { - /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */ - tmp = readl(SC_VPLL27ACTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp &= ~0x000fffff; - tmp |= 0x000f5800; - writel(tmp, SC_VPLL27BCTRL3); - } - - /* wait 1 usec */ - udelay(1); - - /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */ - tmp = readl(SC_VPLL27ACTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL3); - tmp = readl(SC_VPLL27BCTRL3); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL3); - - /* Unset VPLA_SNRST and VPLB_SNRST bit */ - tmp = readl(SC_VPLL27ACTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27ACTRL2); - tmp = readl(SC_VPLL27BCTRL2); - tmp |= 0x10000000; - writel(tmp, SC_VPLL27BCTRL2); - - /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ - tmp = readl(SC_VPLL27ACTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27ACTRL); - tmp = readl(SC_VPLL27BCTRL); - tmp &= ~0x00000001; - writel(tmp, SC_VPLL27BCTRL); -} - -void pll_init(void) -{ - dpll_init(); - stop_mpll(); - vpll_init(); - - /* - * Wait 500 usec until dpll get stable - * We wait 1 usec in vpll_init() so 1 usec can be saved here. - */ - udelay(499); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c deleted file mode 100644 index 4538d1af44..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_spectrum.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void enable_dpll_ssc(void) -{ - u32 tmp; - - tmp = readl(SC_DPLLCTRL); - tmp |= SC_DPLLCTRL_SSC_EN; - writel(tmp, SC_DPLLCTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c deleted file mode 100644 index 3c82a1aca4..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - /* - * Only CS1 is connected to support card. - * BKSZ[1:0] should be set to "01". - */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); - - if (boot_is_swapped()) { - /* - * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. - * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals - */ - writel(0x0000bc01, SBBASE0); - } else { - /* - * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x3effffff: memory bank (31MB) - * 0x03f00000-0x3fffffff: peripherals (1MB) - */ - writel(0x0000be01, SBBASE0); /* dummy */ - writel(0x0200be01, SBBASE1); - } -#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -#if !defined(CONFIG_SPL_BUILD) - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); -#endif - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0400bc01, SBBASE1); /* sub memory */ - writel(0x0800bf01, SBBASE3); /* peripherals */ - -#if !defined(CONFIG_SPL_BUILD) - sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ -#endif - sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ - writel(0x00000001, SG_LOADPINCTRL); - -#endif /* CONFIG_XXX_MICRO_SUPPORT_CARD */ -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c deleted file mode 100644 index b7c4b10969..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -void sg_init(void) -{ - u32 tmp; - - /* Set DDR size */ - tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); - tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE - tmp |= SG_MEMCONF_SPARSEMEM; -#endif - writel(tmp, SG_MEMCONF); - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 1 << 6; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c deleted file mode 100644 index 2d1bde6f13..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -static void umc_start_ssif(void __iomem *ssif_base) -{ - writel(0x00000001, ssif_base + 0x0000b004); - writel(0xffffffff, ssif_base + 0x0000c004); - writel(0x07ffffff, ssif_base + 0x0000c008); - writel(0x00000001, ssif_base + 0x0000b000); - writel(0x00000001, ssif_base + 0x0000c000); - - writel(0x03010100, ssif_base + UMC_HDMCHSEL); - writel(0x03010101, ssif_base + UMC_MDMCHSEL); - writel(0x03010100, ssif_base + UMC_DVCCHSEL); - writel(0x03010100, ssif_base + UMC_DMDCHSEL); - - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_FETCH); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC0); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMQUE1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMWC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_COMRC1); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_WC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_RC); - writel(0x00000000, ssif_base + UMC_CLKEN_SSIF_DST); - writel(0x00000000, ssif_base + 0x0000c044); /* DCGIV_SSIF_REG */ - - writel(0x00000001, ssif_base + UMC_CPURST); - writel(0x00000001, ssif_base + UMC_IDSRST); - writel(0x00000001, ssif_base + UMC_IXMRST); - writel(0x00000001, ssif_base + UMC_HDMRST); - writel(0x00000001, ssif_base + UMC_MDMRST); - writel(0x00000001, ssif_base + UMC_HDDRST); - writel(0x00000001, ssif_base + UMC_MDDRST); - writel(0x00000001, ssif_base + UMC_SIORST); - writel(0x00000001, ssif_base + UMC_GIORST); - writel(0x00000001, ssif_base + UMC_HD2RST); - writel(0x00000001, ssif_base + UMC_VIORST); - writel(0x00000001, ssif_base + UMC_DVCRST); - writel(0x00000001, ssif_base + UMC_RGLRST); - writel(0x00000001, ssif_base + UMC_VPERST); - writel(0x00000001, ssif_base + UMC_AIORST); - writel(0x00000001, ssif_base + UMC_DMDRST); -} - -static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base, - int size, int freq) -{ - writel(0x66bb0f17, dramcont + UMC_CMDCTLA); - writel(0x18c6aa44, dramcont + UMC_CMDCTLB); - writel(0x5101387f, dramcont + UMC_INITCTLA); - writel(0x43030d3f, dramcont + UMC_INITCTLB); - writel(0x00ff00ff, dramcont + UMC_INITCTLC); - writel(0x00000d71, dramcont + UMC_DRMMR0); - writel(0x00000006, dramcont + UMC_DRMMR1); - writel(0x00000298, dramcont + UMC_DRMMR2); - writel(0x00000000, dramcont + UMC_DRMMR3); - writel(0x003f0617, dramcont + UMC_SPCCTLA); - writel(0x00ff0008, dramcont + UMC_SPCCTLB); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D0); - writel(0x000c00ae, dramcont + UMC_RDATACTL_D1); - writel(0x04060802, dramcont + UMC_WDATACTL_D0); - writel(0x04060802, dramcont + UMC_WDATACTL_D1); - writel(0x04a02000, dramcont + UMC_DATASET); - writel(0x00000000, ca_base + 0x2300); - writel(0x00400020, dramcont + UMC_DCCGCTL); - writel(0x0000000f, dramcont + 0x7000); - writel(0x0000000f, dramcont + 0x8000); - writel(0x000000c3, dramcont + 0x8004); - writel(0x00000071, dramcont + 0x8008); - writel(0x00000004, dramcont + UMC_FLOWCTLG); - writel(0x00000000, dramcont + 0x0060); - writel(0x80000201, ca_base + 0xc20); - writel(0x0801e01e, dramcont + UMC_FLOWCTLA); - writel(0x00200000, dramcont + UMC_FLOWCTLB); - writel(0x00004444, dramcont + UMC_FLOWCTLC); - writel(0x200a0a00, dramcont + UMC_SPCSETB); - writel(0x00010000, dramcont + UMC_SPCSETD); - writel(0x80000020, dramcont + UMC_DFICUPDCTLA); -} - -static int umc_init_sub(int freq, int size_ch0, int size_ch1) -{ - void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE; - void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0); - void __iomem *ca_base1 = (void __iomem *)UMC_CA_BASE(1); - void __iomem *dramcont0 = (void __iomem *)UMC_DRAMCONT_BASE(0); - void __iomem *dramcont1 = (void __iomem *)UMC_DRAMCONT_BASE(1); - void __iomem *phy0_0 = (void __iomem *)DDRPHY_BASE(0, 0); - void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1); - void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0); - void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1); - - umc_dram_init_start(dramcont0); - umc_dram_init_start(dramcont1); - umc_dram_init_poll(dramcont0); - umc_dram_init_poll(dramcont1); - - writel(0x00000101, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_0, freq, size_ch0); - - ddrphy_prepare_training(phy0_0, 0); - ddrphy_training(phy0_0); - - writel(0x00000103, dramcont0 + UMC_DIOCTLA); - - ddrphy_init(phy0_1, freq, size_ch0); - - ddrphy_prepare_training(phy0_1, 1); - ddrphy_training(phy0_1); - - writel(0x00000101, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_0, freq, size_ch1); - - ddrphy_prepare_training(phy1_0, 0); - ddrphy_training(phy1_0); - - writel(0x00000103, dramcont1 + UMC_DIOCTLA); - - ddrphy_init(phy1_1, freq, size_ch1); - - ddrphy_prepare_training(phy1_1, 1); - ddrphy_training(phy1_1); - - umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq); - umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq); - - umc_start_ssif(ssif_base); - - return 0; -} - -int umc_init(void) -{ - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); -} - -#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ - (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ - ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ - (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1)) -/* OK */ -#else - #error Unsupported DDR configuration. -#endif -- cgit v1.2.1