From f9162b15c12c009e882574c58457cd31d163dcae Mon Sep 17 00:00:00 2001 From: Akshay Bhat Date: Fri, 29 Jan 2016 15:16:40 -0500 Subject: arm: imx: Add support for GE Bx50v3 boards Add support for GE B450v3, B650v3 and B850v3 boards. The boards are based on Advantech BA16 module which has a i.MX6D processor. The boards support: - FEC Ethernet - USB Ports - SDHC and MMC boot - SPI NOR - LVDS and HDMI display Basic information about the module: - Module manufacturer: Advantech - CPU: Freescale ARM Cortex-A9 i.MX6D - SPECS: Up to 2GB Onboard DDR3 Memory; Up to 16GB Onboard eMMC NAND Flash Supports OpenGL ES 2.0 and OpenVG 1.1 HDMI, 24-bit LVDS 1x UART, 2x I2C, 8x GPIO, 4x Host USB 2.0 port, 1x USB OTG port, 1x micro SD (SDHC),1x SDIO, 1x SATA II, 1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2 Signed-off-by: Akshay Bhat Reviewed-by: Peng Fan --- arch/arm/cpu/armv7/mx6/Kconfig | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/cpu/armv7/mx6/Kconfig') diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index c72a150875..dc0894a0bb 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -60,6 +60,18 @@ config TARGET_CM_FX6 config TARGET_EMBESTMX6BOARDS bool "embestmx6boards" +config TARGET_GE_B450V3 + bool "General Electric B450v3" + select MX6Q + +config TARGET_GE_B650V3 + bool "General Electric B650v3" + select MX6Q + +config TARGET_GE_B850V3 + bool "General Electric B850v3" + select MX6Q + config TARGET_GW_VENTANA bool "gw_ventana" select SUPPORT_SPL @@ -158,6 +170,7 @@ endchoice config SYS_SOC default "mx6" +source "board/ge/bx50v3/Kconfig" source "board/aristainetos/Kconfig" source "board/bachmann/ot1200/Kconfig" source "board/barco/platinum/Kconfig" -- cgit v1.2.1