From 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 6 Jun 2007 16:26:56 +0200 Subject: Coding Style cleanup; generate new CHANGELOG file. Signed-off-by: Wolfgang Denk --- CHANGELOG | 483 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 483 insertions(+) (limited to 'CHANGELOG') diff --git a/CHANGELOG b/CHANGELOG index 24d805eb38..b77eec71ba 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,9 +1,438 @@ +commit c440bfe6d6d92d66478a7e84402b31f48413617b +Author: Stefan Roese +Date: Wed Jun 6 11:42:13 2007 +0200 + + ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board + + This patch adds NAND booting support for the AMCC Acadia eval board. + + Please make sure to configure jumper J7 to position 2-3 when booting + from NOR, and to position 1-2 when booting for NAND. + + I also added a board command to configure the I2C bootstrap EEPROM + values. Right now only 267MHz is support for booting either via NOR + or NAND FLASH. Here the usage: + + => bootstrap 267 nor ;to configure the board for 267MHz NOR booting + => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting + + Signed-off-by: Stefan Roese + +commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e +Author: Ed Swarthout +Date: Tue Jun 5 12:30:52 2007 -0500 + + mpc8641 image size cleanup + + e600 does not have a bootpg restriction. + Move the version string to beginning of image at fff00000. + Resetvec.S is not needed. + Update flash copy instructions. + Add tftpflash env variable + + Signed-off-by: Ed Swarthout + Signed-off-by: Jon Loeliger + +commit e3cbe1f93c5722f8ebbad468e30c069a2b511097 +Author: Benoît Monin +Date: Mon Jun 4 08:36:05 2007 +0200 + + [PATCH] Fix ppc4xx bootstrap letter displayed on startup + + The attached patch is mainly cosmetic, allowing u-boot to + display the correct bootstrap option letter according to the + datasheets. + + The original patch was extended with 405EZ support by Stefan + Roese. + + Signed-off-by: Benoit Monin + Signed-off-by: Stefan Roese + +commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7 +Author: Stefan Roese +Date: Fri Jun 1 16:18:17 2007 +0200 + + ppc4xx: Add missing file for Bamboo NAND booting support + + Signed-off-by: Stefan Roese + +commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b +Author: Stefan Roese +Date: Fri Jun 1 15:58:19 2007 +0200 + + ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz + + This patch undoes the patch by Jeff Mann with commit-id ada4697d. As + suggested by AMCC it is not recommended to dynamically change the EBC + speed after bootup. So we undo this change to be on the safe side. + + Signed-off-by: Stefan Roese + +commit 9d9096043e8f713d4bf1743d32e1459e6a11644b +Author: Stefan Roese +Date: Fri Jun 1 15:29:04 2007 +0200 + + ppc4xx: Update Sequoia NAND booting support with ECC + + Signed-off-by: Stefan Roese + +commit cf959c7d6687567c308e366e9581e1a5aff5cc5b +Author: Stefan Roese +Date: Fri Jun 1 15:27:11 2007 +0200 + + ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board + + This patch adds NAND booting support for the AMCC Bamboo eval board. + Since the NAND-SPL boot image is limited to 4kbytes, this version + only supports the onboard 64MBytes of DDR. The DIMM modules can't be + supported, since the setup code for I2C DIMM autodetection and + configuration is too big for this NAND bootloader. + + Signed-off-by: Stefan Roese + +commit 42be56f53c8b107868e6125c8524ae84293e95a7 +Author: Stefan Roese +Date: Fri Jun 1 15:23:04 2007 +0200 + + NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c + + The U-Boot NAND booting support is now extended to support ECC + upon loading of the NAND U-Boot image. + + Tested on AMCC Sequoia (440EPx) and Bamboo (440EP). + + Signed-off-by: Stefan Roese + +commit a471db07fbb65a841ffc9f4f112562b945230f98 +Author: Stefan Roese +Date: Fri Jun 1 15:19:29 2007 +0200 + + ppc4xx: Prepare Bamboo port for NAND booting support + + This patch updates the "normal" Bamboo NOR booting port, so + that it is compatible with the coming soon NAND booting + Bamboo port. + + It also enables the 2nd NAND flash on the Bamboo. + + Signed-off-by: Stefan Roese + +commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987 +Author: Stefan Roese +Date: Fri Jun 1 15:16:58 2007 +0200 + + ppc4xx: Update in_be32() functions and friends to latest Linux version + + Signed-off-by: Stefan Roese + +commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c +Author: Stefan Roese +Date: Fri Jun 1 15:15:12 2007 +0200 + + NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c + + This patch adds hardware ECC support to the NDFC driver. It also + changes the register access from using the "simple" in32/out32 + functions to the in_be32/out_be32 functions, which make sure + that the access is correctly synced. This is the only recommended + access to SoC registers in the current Linux kernel. + + Signed-off-by: Stefan Roese + +commit 17b5e862287cca76f19dcf8b741e61a7d06617f2 +Author: Stefan Roese +Date: Fri Jun 1 15:12:15 2007 +0200 + + NAND: Update nand_ecc.c to latest Linux version + + This patch updates the nand_ecc code to the latest Linux version. + The main reason for this is the more compact code. This makes + it possible to include the ECC code into the NAND bootloader + image (NAND_SPL) for PPC4xx. + + Signed-off-by: Stefan Roese + +commit d2d432760d2199d0e8558fdd9d1789b8131abcf7 +Author: Stefan Roese +Date: Fri Jun 1 15:09:50 2007 +0200 + + ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo + + Signed-off-by: Stefan Roese + +commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc +Author: Stefan Roese +Date: Fri Jun 1 13:45:24 2007 +0200 + + ppc4xx: Change Luan config file to support ECC + + With the updated 44x DDR2 driver the Luan board now supports + ECC generation and checking. + + Signed-off-by: Stefan Roese + +commit 7187db73491c8de0fb56efb5e5134ba5ec443089 +Author: Stefan Roese +Date: Fri Jun 1 13:45:00 2007 +0200 + + ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) + + Add config option for 180 degree advance clock control as needed + for the AMCC Luan eval board. + + Signed-off-by: Stefan Roese + +commit ee1529838abbfaa35f14e3ffbeaaba693159475f +Author: Wolfgang Denk +Date: Thu May 31 17:20:09 2007 +0200 + + Add support for STX GP3SSA (stxssa) Board with 4 MiB flash. + + Signed-off-by: Wolfgang Denk + +commit 7049288fb1f16f1b317140226cdebd07bd416395 +Author: Bartlomiej Sieka +Date: Sun May 27 17:26:46 2007 +0200 + + Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH. + + Signed-off-by: Bartlomiej Sieka + +commit 4520fd4d2c450da49637216aa0e53739b61c60ac +Author: Bartlomiej Sieka +Date: Sun May 27 17:06:36 2007 +0200 + + Motion-PRO: Add support for redundant environment. + + Enable redundant environment, add a MTD partition for it; also add env. + variable command for passing MTD partitions to the kernel command line. + + Signed-off-by: Piotr Kruszynski + Acked-by: Bartlomiej Sieka + +commit a26eabeec31746f06d309103690892805696e344 +Author: Bartlomiej Sieka +Date: Sun May 27 17:05:11 2007 +0200 + + Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes. + + Allow passing longer command line to the kernel - useful especially + for passing MTD partition layout. + + Signed-off-by: Piotr Kruszynski + Acked-by: Bartlomiej Sieka + +commit 9160b96f71483a116de81c68985e8ee306d36764 +Author: Bartlomiej Sieka +Date: Sun May 27 17:04:18 2007 +0200 + + Fix: Add missing NULL termination in strings expanded by macros parser. + + Signed-off-by: Piotr Kruszynski + Acked-by: Bartlomiej Sieka + +commit 630ec84aef7228fc1dbfb38dec78541403a786cd +Author: Bartlomiej Sieka +Date: Sun May 27 17:03:37 2007 +0200 + + Motion-PRO: Update EEPROM's page write bits and write delay. + + Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A + have a page write capability of two bytes", and "This device offers fast (1ms) + byte write". Add 3ms of extra delay. + + Signed-off-by: Piotr Kruszynski + Acked-by: Bartlomiej Sieka + +commit c00125e07c1ebc125bab40e1e18bceed8be0c162 +Author: Bartlomiej Sieka +Date: Sun May 27 16:58:45 2007 +0200 + + MPC5XXX, Motion-PRO: Fix PHY initialization problem. + + After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which + networking does not function. This commit switches PHY to TX mode by clearing + the FX_SEL bit of Mode Control Register. It also reverses commit + 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround. + + Signed-off-by: Grzegorz Bernacki + Acked-by: Bartlomiej Sieka + +commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db +Author: Bartlomiej Sieka +Date: Sun May 27 16:57:15 2007 +0200 + + Motion-PRO: Add support for the temperature sensor. + + Signed-off-by: Piotr Kruszynski + Acked-by: Bartlomiej Sieka + +commit c75e639630cc132dc19cd1ecda5922c0db0bfbba +Author: Bartlomiej Sieka +Date: Sun May 27 16:55:23 2007 +0200 + + Motion-PRO: Add displaying of CPLD revision information during boot. + + Signed-off-by: Jan Wrobel + Acked-by: Bartlomiej Sieka + +commit c99512d6bd3973f01ca2fc4896d829b46e68f150 +Author: Bartlomiej Sieka +Date: Sun May 27 16:53:43 2007 +0200 + + MPC5xxx: Change names of defines related to IPB and PCI clocks. + + Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining + them does not cause PCI or IPB clocks to run at the specified speed. + Instead, they configure divisors used to calculate said clocks. This + patch renames the defines according to their real function. + + Signed-off-by: Grzegorz Bernacki + Acked-by: Bartlomiej Sieka + +commit a11c0b85dc3664bb3c1e781137118730c8f619ab +Author: Bartlomiej Sieka +Date: Sun May 27 16:51:48 2007 +0200 + + Motion-PRO: Add LED support. + + Signed-off-by: Jan Wrobel + Signed-off-by: Marian Balakowicz + Acked-by: Bartlomiej Sieka + +commit d756894722c888d09a9fa1df8323753772d3dcce +Author: Stefan Roese +Date: Thu May 24 09:49:00 2007 +0200 + + ppc4xx: Fix small 405EZ OCM initilization bug in start.S + + As pointed out by Bruce Adler this patch + fixes a small bug in the 405EZ OCM initialization. Thanks for + spotting. + + Signed-off-by: Stefan Roese + +commit 5d4a179013d59a76446462e1eb0a969fba63eb81 +Author: Stefan Roese +Date: Thu May 24 08:22:09 2007 +0200 + + ppc4xx: Update AMCC Acadia support for board revision 1.1 + + This patch updates the Acadia (405EZ) support for the new 1.1 board + revision. It also adds support for NAND FLASH via the 4xx NDFC. + + Please note that the jumper J7 must be in position 2-3 for this + NAND support. Position 1-2 is for NAND booting only. NAND booting + support will follow later. + + Signed-off-by: Stefan Roese + +commit 9f0077abd69f7a7c756a915b961037302be3e6f2 +Author: Stefan Roese +Date: Tue May 22 12:48:09 2007 +0200 + + ppc4xx: Use do { ... } while (0) for CPR & SDR access macros + + Signed-off-by: Stefan Roese + +commit 6f3dfc139a838b0841c151efe00ad47db2366e79 +Author: Stefan Roese +Date: Tue May 22 12:46:10 2007 +0200 + + ppc4xx: Add 405 support to 4xx NAND driver ndfc.c + + This patch adds support for 405 PPC's to the 4xx NAND driver + ndfc.c. This is in preparation for the new AMCC 405EZ. + + Signed-off-by: Stefan Roese + +commit 10603d76767426be803dadd4fb688b97eb69481c +Author: Stefan Roese +Date: Mon May 21 07:41:22 2007 +0200 + + ppc4xx: Fix problem in 405EZ OCM initialization + + As spotted by Bruce Adler this patch fixes an initialization problem + for the 405EZ OCM. + + Signed-off-by: Stefan Roese + +commit 3e3b956906eba9e4ad7931581ecedaad10eccce8 +Author: Peter Pearse +Date: Fri May 18 16:47:03 2007 +0100 + + Reduce line lengths to 80 characters max. + +commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72 +Author: Peter Pearse +Date: Fri May 18 14:34:07 2007 +0100 + + Makefile permissions + +commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d +Author: Peter Pearse +Date: Fri May 18 14:33:11 2007 +0100 + + Makefile permissions + +commit 70124c2602ae2d4c5d3dba05b482d91548242de8 +Author: Stefano Babic +Date: Wed May 16 14:49:12 2007 +0200 + + Fix compile problem cause my Microblaze merge + + Signed-off-by: Stefano Babic + +commit ada4697d0230d6da552867777f98a67ec3ba2579 +Author: Jeffrey Mann +Date: Wed May 16 13:23:10 2007 +0200 + + [PATCH] Run new sequoia boards with an EBC speed of 83MHz + + Because the Sequoia board does not boot with an EBC faster than 66MHz, + the clock divider are changed after the initial boot process. + + This allows for maximum clocking speeds to be achieved on newer boards. + Sequoia boards with 666.66 MHz processors require that the EBC divider + be set to 3 in order to start the initial boot process at a slower EBC + speed. After the initial boot process, the divider can be set back to 2, + which will cause the boards to run at 83.333MHz. This is backward + compatible with boards with 533.33 MHz processors, as these boards will + already be set with an EBC divider of 2. + + Signed-off-by: Jeffrey Mann + +commit a7676ea7732f3c596805079fed7e5c9fac652cfc +Author: Wolfgang Denk +Date: Wed May 16 01:16:53 2007 +0200 + + Minor Coding Style cleanup, update CHANGELOG. + + Signed-off-by: Wolfgang Denk + commit d62f64cc23a940eafe712c776b3249e4160753d1 Author: Wolfgang Denk Date: Wed May 16 00:13:33 2007 +0200 Coding Style Cleanup, new CHANGELOG +commit 61936667e86a250ae12fd2dc189d3588f0a59e0b +Author: Stefan Roese +Date: Fri May 11 12:01:49 2007 +0200 + + ppc4xx: Add mtcpr/mfcpr access macros + + Signed-off-by: Stefan Roese + +commit 343c48bd84606c4025c8a7c7263fda465d6e284c +Author: Stefan Roese +Date: Fri May 11 12:01:06 2007 +0200 + + ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too + + Signed-off-by: Stefan Roese + commit 7d98ba770a7eaefa29ce927f31a0956df85bf650 Author: Piotr Kruszynski Date: Thu May 10 16:55:52 2007 +0200 @@ -11,6 +440,48 @@ Date: Thu May 10 16:55:52 2007 +0200 [Motion-PRO] Add MTD and JFFS2 support, also add default partition definition. +commit 65fb6a676e821f9570a2a376dc204bf611ce5f81 +Author: Peter Pearse +Date: Wed May 9 11:42:44 2007 +0100 + + Add the board directory for SMN42 + +commit 160131bf965785419626df6c388729fe0b597992 +Author: Peter Pearse +Date: Wed May 9 11:41:58 2007 +0100 + + Add the files for the SMN42 board + +commit 5c6d2b5a500f8c49670de8910150b78a41f781fc +Author: Peter Pearse +Date: Wed May 9 11:40:34 2007 +0100 + + Remove the deleted files for the SMN42 patch + +commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761 +Author: Peter Pearse +Date: Wed May 9 11:37:56 2007 +0100 + + New board SMN42 branch + +commit 29f3be0caf0799ca6b89dfd9824c15619a50000f +Author: Peter Pearse +Date: Wed May 9 10:24:38 2007 +0100 + + Makefile permissions + +commit b84289b595731e8851df46e893845cc1322c9b9b +Author: Ed Swarthout +Date: Tue May 8 14:17:07 2007 -0500 + + 8641hpcn: Fix Makefile after moving pixis to board/freescale. + + The OBJTREE != SRCTREE build scenario was broken. + This fixes it. + + Signed-off-by: Ed Swarthout + Signed-off-by: Jon Loeliger + commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1 Author: Michal Simek Date: Tue May 8 15:57:43 2007 +0200 @@ -93,6 +564,18 @@ Date: Mon May 7 19:43:10 2007 +0200 fix: read and write MSR - repair number of parameters +commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee +Author: Jeffrey Mann +Date: Mon May 7 19:42:49 2007 +0200 + + [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file + + A '3' got cut off in the formatting of the last patch to automatically + change the clock speed of the system clock on sequoia board. + + Signed-off-by: Jeffrey Mann + Signed-off-by: Stefan Roese + commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39 Author: Michal Simek Date: Mon May 7 19:33:51 2007 +0200 -- cgit v1.2.1