From d0c47b3ef7c582ec984edeba08984b0acc2ffcba Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 27 Feb 2015 02:26:46 +0900 Subject: serial: UniPhier: use 32 bit register access For PH1-Pro4, the 8 bit write access to LCR register (offset = 0x11) is not working correctly. As a side effect, it also modifies MCR register (offset = 0x10) and results in unexpected behavior. Signed-off-by: Masahiro Yamada --- drivers/serial/serial_uniphier.c | 54 +++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 28 deletions(-) diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index e8a1608b99..327e0dc517 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation + * Copyright (C) 2012-2015 Panasonic Corporation * Author: Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ @@ -13,31 +13,25 @@ #include #include -#define UART_REG(x) \ - u8 x; \ - u8 postpad_##x[3]; - /* * Note: Register map is slightly different from that of 16550. */ struct uniphier_serial { - UART_REG(rbr); /* 0x00 */ - UART_REG(ier); /* 0x04 */ - UART_REG(iir); /* 0x08 */ - UART_REG(fcr); /* 0x0c */ - u8 mcr; /* 0x10 */ - u8 lcr; - u16 __postpad; - UART_REG(lsr); /* 0x14 */ - UART_REG(msr); /* 0x18 */ - u32 __none1; - u32 __none2; - u16 dlr; - u16 __postpad2; + u32 rx; /* In: Receive buffer */ +#define tx rx /* Out: Transmit buffer */ + u32 ier; /* Interrupt Enable Register */ + u32 iir; /* In: Interrupt ID Register */ + u32 char_fcr; /* Charactor / FIFO Control Register */ + u32 lcr_mcr; /* Line/Modem Control Register */ +#define LCR_SHIFT 8 +#define LCR_MASK (0xff << (LCR_SHIFT)) + u32 lsr; /* In: Line Status Register */ + u32 msr; /* In: Modem Status Register */ + u32 __rsv0; + u32 __rsv1; + u32 dlr; /* Divisor Latch Register */ }; -#define thr rbr - struct uniphier_serial_private_data { struct uniphier_serial __iomem *membase; }; @@ -51,12 +45,16 @@ static int uniphier_serial_setbrg(struct udevice *dev, int baudrate) struct uniphier_serial __iomem *port = uniphier_serial_port(dev); const unsigned int mode_x_div = 16; unsigned int divisor; + u32 tmp; - writeb(UART_LCR_WLEN8, &port->lcr); + tmp = readl(&port->lcr_mcr); + tmp &= ~LCR_MASK; + tmp |= UART_LCR_WLEN8 << LCR_SHIFT; + writel(tmp, &port->lcr_mcr); divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate); - writew(divisor, &port->dlr); + writel(divisor, &port->dlr); return 0; } @@ -65,20 +63,20 @@ static int uniphier_serial_getc(struct udevice *dev) { struct uniphier_serial __iomem *port = uniphier_serial_port(dev); - if (!(readb(&port->lsr) & UART_LSR_DR)) + if (!(readl(&port->lsr) & UART_LSR_DR)) return -EAGAIN; - return readb(&port->rbr); + return readl(&port->rx); } static int uniphier_serial_putc(struct udevice *dev, const char c) { struct uniphier_serial __iomem *port = uniphier_serial_port(dev); - if (!(readb(&port->lsr) & UART_LSR_THRE)) + if (!(readl(&port->lsr) & UART_LSR_THRE)) return -EAGAIN; - writeb(c, &port->thr); + writel(c, &port->tx); return 0; } @@ -88,9 +86,9 @@ static int uniphier_serial_pending(struct udevice *dev, bool input) struct uniphier_serial __iomem *port = uniphier_serial_port(dev); if (input) - return readb(&port->lsr) & UART_LSR_DR; + return readl(&port->lsr) & UART_LSR_DR; else - return !(readb(&port->lsr) & UART_LSR_THRE); + return !(readl(&port->lsr) & UART_LSR_THRE); } static int uniphier_serial_probe(struct udevice *dev) -- cgit v1.2.1