From 1749c3da8d8445cdf78d70120a803e3e9553113c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 7 Apr 2010 02:49:12 -0500 Subject: ppc/85xx: Fixup PCI nodes for P1_P2_RDB While we had ft_pci_board_setup it wasn't being called by ft_board_setup. Fix that so we actually update the device tree PCI nodes on P1_P2_RDB boards. Signed-off-by: Kumar Gala --- board/freescale/p1_p2_rdb/p1_p2_rdb.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index 3af660e775..31cdf9ae4c 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -198,6 +198,8 @@ int board_eth_init(bd_t *bis) #endif #if defined(CONFIG_OF_BOARD_SETUP) +extern void ft_pci_board_setup(void *blob); + void ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; @@ -208,6 +210,8 @@ void ft_board_setup(void *blob, bd_t *bd) base = getenv_bootm_low(); size = getenv_bootm_size(); + ft_pci_board_setup(blob); + fdt_fixup_memory(blob, (u64)base, (u64)size); } #endif -- cgit v1.2.1 From ab48ca1a661b9ab8e3fee9fe2df65432b09ed073 Mon Sep 17 00:00:00 2001 From: Srikanth Srinivasan Date: Wed, 10 Feb 2010 17:32:43 +0800 Subject: ppc/p4080: Fix synchronous frequency calculations When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan Signed-off-by: Dave Liu Signed-off-by: Ed Swarthout Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc85xx/cpu.c | 14 +++++--------- arch/powerpc/cpu/mpc85xx/speed.c | 28 ++++++++++++++++++---------- arch/powerpc/include/asm/immap_85xx.h | 4 ++-- 3 files changed, 25 insertions(+), 21 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 0cc6e0323f..15b7b231ee 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright 2004,2007-2009 Freescale Semiconductor, Inc. + * Copyright 2004,2007-2010 Freescale Semiconductor, Inc. * (C) Copyright 2002, 2003 Motorola Inc. * Xianghua Xiao (X.Xiao@motorola.com) * @@ -44,21 +44,17 @@ int checkcpu (void) uint major, minor; struct cpu_type *cpu; char buf1[32], buf2[32]; -#ifdef CONFIG_DDR_CLK_FREQ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#ifdef CONFIG_FSL_CORENET - u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC) - >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT; -#else +#ifdef CONFIG_DDR_CLK_FREQ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; -#endif #else #ifdef CONFIG_FSL_CORENET - u32 ddr_sync = 0; + u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC) + >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT; #else u32 ddr_ratio = 0; -#endif +#endif /* CONFIG_FSL_CORENET */ #endif /* CONFIG_DDR_CLK_FREQ */ int i; diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 268edbc5b7..8132115fca 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -1,5 +1,5 @@ /* - * Copyright 2004, 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2004, 2007-2010 Freescale Semiconductor, Inc. * * (C) Copyright 2003 Motorola Inc. * Xianghua Xiao, (X.Xiao@motorola.com) @@ -71,22 +71,30 @@ void get_sys_info (sys_info_t * sysInfo) [14] = 4, /* CC4 PPL / 4 */ }; uint lcrr_div, i, freqCC_PLL[4], rcw_tmp; + uint ratio[4]; unsigned long sysclk = CONFIG_SYS_CLK_FREQ; + uint mem_pll_rat; sysInfo->freqSystemBus = sysclk; sysInfo->freqDDRBus = sysclk; - freqCC_PLL[0] = sysclk; - freqCC_PLL[1] = sysclk; - freqCC_PLL[2] = sysclk; - freqCC_PLL[3] = sysclk; sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; - sysInfo->freqDDRBus *= ((in_be32(&gur->rcwsr[0]) >> 17) & 0x1f); - freqCC_PLL[0] *= (in_be32(&clk->pllc1gsr) >> 1) & 0x3f; - freqCC_PLL[1] *= (in_be32(&clk->pllc2gsr) >> 1) & 0x3f; - freqCC_PLL[2] *= (in_be32(&clk->pllc3gsr) >> 1) & 0x3f; - freqCC_PLL[3] *= (in_be32(&clk->pllc4gsr) >> 1) & 0x3f; + mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f; + if (mem_pll_rat > 2) + sysInfo->freqDDRBus *= mem_pll_rat; + else + sysInfo->freqDDRBus = sysInfo->freqSystemBus * mem_pll_rat; + ratio[0] = (in_be32(&clk->pllc1gsr) >> 1) & 0x3f; + ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f; + ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f; + ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f; + for (i = 0; i < 4; i++) { + if (ratio[i] > 4) + freqCC_PLL[i] = sysclk * ratio[i]; + else + freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i]; + } rcw_tmp = in_be32(&gur->rcwsr[3]); for (i = 0; i < cpu_numcores(); i++) { u32 c_pll_sel = (in_be32(&clk->clkc0csr + i*8) >> 27) & 0xf; diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 957ad76a79..dd28e3239a 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1697,8 +1697,8 @@ typedef struct ccsr_gur { u8 res17[24]; u32 rcwsr[16]; /* Reset control word status */ #define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000 -#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00008000 -#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 15 +#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080 +#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7 #define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000 #define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000 #define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000 -- cgit v1.2.1 From 17d90f31a810a19ade1a1c534fde9f65d4d66390 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Fri, 5 Mar 2010 12:23:00 +0800 Subject: ppc/p4080: Extend the GUTS memory map Extend pin control and clock control to GUTS memory map Signed-off-by: Dave Liu Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/immap_85xx.h | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index dd28e3239a..916cc62537 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1647,7 +1647,7 @@ typedef struct ccsr_gur { u8 res4[12]; u32 gpindr; /* General-purpose input data */ u8 res5[12]; - u32 pmuxcr; /* Alt function signal multiplex control */ + u32 alt_pmuxcr; /* Alt function signal multiplex control */ u8 res6[12]; u32 devdisr; /* Device disable control */ #define FSL_CORENET_DEVDISR_PCIE1 0x80000000 @@ -1750,7 +1750,17 @@ typedef struct ccsr_gur { u32 cgencrl; /* Core general control */ u8 res31[184]; u32 sriopstecr; /* SRIO prescaler timer enable control */ - u8 res32[2300]; + u8 res32[1788]; + u32 pmuxcr; /* Pin multiplexing control */ + u8 res33[60]; + u32 iovselsr; /* I/O voltage selection status */ + u8 res34[28]; + u32 ddrclkdr; /* DDR clock disable */ + u8 res35; + u32 elbcclkdr; /* eLBC clock disable */ + u8 res36[20]; + u32 sdhcpcr; /* eSDHC polarity configuration */ + u8 res37[380]; } ccsr_gur_t; typedef struct ccsr_clk { -- cgit v1.2.1 From 1231c498e016b5bfe85f1eb87c2e044d3389d7da Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 7 Apr 2010 10:39:46 -0500 Subject: ppc/p4080: Add p4080 DEVDISR2 & SRDS_PLLCR0 defines Added some needed fines and some misc additional defines used by p4080 initialization. Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/immap_85xx.h | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 916cc62537..ef3a1e1c03 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1,7 +1,7 @@ /* * MPC85xx Internal Memory Map * - * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * Copyright(c) 2002,2003 Motorola Inc. * Xianghua Xiao (x.xiao@motorola.com) @@ -1672,7 +1672,23 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR_I2C2 0x00000010 #define FSL_CORENET_DEVDISR_DUART1 0x00000002 #define FSL_CORENET_DEVDISR_DUART2 0x00000001 - u8 res7[12]; + u32 devdisr2; /* Device disable control 2 */ +#define FSL_CORENET_DEVDISR2_PME 0x80000000 +#define FSL_CORENET_DEVDISR2_SEC 0x40000000 +#define FSL_CORENET_DEVDISR2_QMBM 0x08000000 +#define FSL_CORENET_DEVDISR2_FM1 0x02000000 +#define FSL_CORENET_DEVDISR2_10GEC1 0x01000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_1 0x00800000 +#define FSL_CORENET_DEVDISR2_DTSEC1_2 0x00400000 +#define FSL_CORENET_DEVDISR2_DTSEC1_3 0x00200000 +#define FSL_CORENET_DEVDISR2_DTSEC1_4 0x00100000 +#define FSL_CORENET_DEVDISR2_FM2 0x00020000 +#define FSL_CORENET_DEVDISR2_10GEC2 0x00010000 +#define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00008000 +#define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00004000 +#define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00002000 +#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00001000 + u8 res7[8]; u32 powmgtcsr; /* Power management status & control */ u8 res8[12]; u32 coredisru; /* uppper portion for support of 64 cores */ @@ -1699,6 +1715,7 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000 #define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080 #define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7 +#define FSL_CORENET_RCWSR5_SRDS_EN 0x00002000 #define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000 #define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000 #define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000 @@ -1952,7 +1969,15 @@ typedef struct serdes_corenet { #define SRDS_RSTCTL_RST 0x80000000 #define SRDS_RSTCTL_RSTDONE 0x40000000 #define SRDS_RSTCTL_RSTERR 0x20000000 +#define SRDS_RSTCTL_SDPD 0x00000020 u32 pllcr0; /* PLL Control Register 0 */ +#define SRDS_PLLCR0_RFCK_SEL_MASK 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000 +#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000 +#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000 +#define SRDS_PLLCR0_FRATE_SEL_MASK 0x00030000 +#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 +#define SRDS_PLLCR0_FRATE_SEL_6_25 0x00010000 u32 pllcr1; /* PLL Control Register 1 */ #define SRDS_PLLCR1_PLL_BWSEL 0x08000000 u32 res[5]; @@ -2028,6 +2053,7 @@ enum { #define CONFIG_SYS_MPC85xx_USB_OFFSET 0x210000 #define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000 #define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000 +#define CONFIG_SYS_TSEC1_OFFSET 0x4e0000 /* FM1@DTSEC0 */ #else #define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000 -- cgit v1.2.1 From f8d05e5e5888d88ab42524d699924936e8e77970 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Fri, 5 Mar 2010 12:23:00 +0800 Subject: fsl-ddr: add the macro for Rtt_Nom definition add the macro definition for Rtt_Nom termination value for DDR3 Signed-off-by: Dave Liu Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/fsl_ddr_sdram.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 3216a50633..02920dbfd7 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -24,6 +24,12 @@ #define DDR_OTF 6 /* on-the-fly BC4 and BL8 */ #define DDR_BL8 8 /* burst length 8 */ +#define DDR3_RTT_60_OHM 1 /* RTT_Nom = RZQ/4 */ +#define DDR3_RTT_120_OHM 2 /* RTT_Nom = RZQ/2 */ +#define DDR3_RTT_40_OHM 3 /* RTT_Nom = RZQ/6 */ +#define DDR3_RTT_20_OHM 4 /* RTT_Nom = RZQ/12 */ +#define DDR3_RTT_30_OHM 5 /* RTT_Nom = RZQ/8 */ + #if defined(CONFIG_FSL_DDR1) #define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (1) typedef ddr1_spd_eeprom_t generic_spd_eeprom_t; -- cgit v1.2.1 From 99bac479dd183529f4e259a0de8d31644219d487 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Tue, 8 Dec 2009 11:56:48 +0800 Subject: fsl-ddr: Add extra cycle to turnaround times Add an extra cycle turnaround time to read->write to ensure stability at high DDR frequencies. Signed-off-by: Dave Liu Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 03f9c4380d..4a282bc52d 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -198,6 +198,8 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr) pre_pd_exit_mclk = act_pd_exit_mclk; taxpd_mclk = 8; tmrd_mclk = 4; + /* set the turnaround time */ + trwt_mclk = 1; #else /* CONFIG_FSL_DDR2 */ /* * (tXARD and tXARDS). Empirical? -- cgit v1.2.1 From e4773debb735323a9eedf353239e8e88e03d7c58 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Mon, 12 Apr 2010 14:23:25 +0800 Subject: fsl_sata: Add the workaround for errata SATA-A001 After power on, the SATA host controller of P1022 Rev1 is configured in legacy mode instead of the expected enterprise mode. Software needs to clear bit[28] of HControl register to change to enterprise mode after bringing the host offline. Signed-off-by: Dave Liu Signed-off-by: Kumar Gala --- drivers/block/fsl_sata.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c index abcda6fb5f..88785605fa 100644 --- a/drivers/block/fsl_sata.c +++ b/drivers/block/fsl_sata.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -191,6 +192,27 @@ int init_sata(int dev) /* Wait the controller offline */ ata_wait_register(®->hstatus, HSTATUS_ONOFF, 0, 1000); +#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001) + /* + * For P1022/1013 Rev1.0 silicon, after power on SATA host + * controller is configured in legacy mode instead of the + * expected enterprise mode. software needs to clear bit[28] + * of HControl register to change to enterprise mode from + * legacy mode. + */ + { + u32 svr = get_svr(); + if (IS_SVR_REV(svr, 1, 0) && + ((SVR_SOC_VER(svr) == SVR_P1022) || + (SVR_SOC_VER(svr) == SVR_P1022_E) || + (SVR_SOC_VER(svr) == SVR_P1013) || + (SVR_SOC_VER(svr) == SVR_P1013_E))) { + out_le32(®->hstatus, 0x20000000); + out_le32(®->hcontrol, 0x00000100); + } + } +#endif + /* Set the command header base address to CHBA register to tell DMA */ out_le32(®->chba, (u32)cmd_hdr & ~0x3); -- cgit v1.2.1 From cd3abcfa2d4dc8df09f6d01e735e4dc2f6c87ebc Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Mon, 12 Apr 2010 14:23:35 +0800 Subject: fsl_sata: Move the snoop bit to another place For P1022 SATA host controller, the data snoop bit of DW3 in PRDT is moved to bit28. Signed-off-by: Dave Liu Signed-off-by: Kumar Gala --- drivers/block/fsl_sata.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/block/fsl_sata.h b/drivers/block/fsl_sata.h index 18e88fa4ad..576efaf6f5 100644 --- a/drivers/block/fsl_sata.h +++ b/drivers/block/fsl_sata.h @@ -243,8 +243,12 @@ typedef struct prd_entry { /* ext_c_ddc */ -#define PRD_ENTRY_EXT 0x80000000 /* extension flag or called indirect descriptor flag */ -#define PRD_ENTRY_DATA_SNOOP 0x00400000 /* Snoop enable for all data associated with the PRD entry */ +#define PRD_ENTRY_EXT 0x80000000 /* extension flag */ +#ifdef CONFIG_FSL_SATA_V2 +#define PRD_ENTRY_DATA_SNOOP 0x10000000 /* Data snoop enable */ +#else +#define PRD_ENTRY_DATA_SNOOP 0x00400000 /* Data snoop enable */ +#endif #define PRD_ENTRY_LEN_MASK 0x003fffff /* Data word count */ #define PRD_ENTRY_MAX_XFER_SZ (PRD_ENTRY_LEN_MASK + 1) -- cgit v1.2.1 From 4db9708b94b6745f5c1eaa699d4d76477de8588a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 13 Apr 2010 23:56:23 -0500 Subject: 85xx: Convert cpu_init_f code to use out_be32 for LBC registers Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc85xx/cpu_init.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index e0126d331a..b517e06608 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -180,54 +180,54 @@ void cpu_init_f (void) * has been determined */ #if defined(CONFIG_SYS_OR0_REMAP) - memctl->or0 = CONFIG_SYS_OR0_REMAP; + out_be32(&memctl->or0, CONFIG_SYS_OR0_REMAP); #endif #if defined(CONFIG_SYS_OR1_REMAP) - memctl->or1 = CONFIG_SYS_OR1_REMAP; + out_be32(&memctl->or1, CONFIG_SYS_OR1_REMAP); #endif /* now restrict to preliminary range */ /* if cs1 is already set via debugger, leave cs0/cs1 alone */ if (! memctl->br1 & 1) { #if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) - memctl->br0 = CONFIG_SYS_BR0_PRELIM; - memctl->or0 = CONFIG_SYS_OR0_PRELIM; + out_be32(&memctl->br0, CONFIG_SYS_BR0_PRELIM); + out_be32(&memctl->or0, CONFIG_SYS_OR0_PRELIM); #endif #if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - memctl->or1 = CONFIG_SYS_OR1_PRELIM; - memctl->br1 = CONFIG_SYS_BR1_PRELIM; + out_be32(&memctl->or1, CONFIG_SYS_OR1_PRELIM); + out_be32(&memctl->br1, CONFIG_SYS_BR1_PRELIM); #endif } #if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - memctl->or2 = CONFIG_SYS_OR2_PRELIM; - memctl->br2 = CONFIG_SYS_BR2_PRELIM; + out_be32(&memctl->or2, CONFIG_SYS_OR2_PRELIM); + out_be32(&memctl->br2, CONFIG_SYS_BR2_PRELIM); #endif #if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - memctl->or3 = CONFIG_SYS_OR3_PRELIM; - memctl->br3 = CONFIG_SYS_BR3_PRELIM; + out_be32(&memctl->or3, CONFIG_SYS_OR3_PRELIM); + out_be32(&memctl->br3, CONFIG_SYS_BR3_PRELIM); #endif #if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - memctl->or4 = CONFIG_SYS_OR4_PRELIM; - memctl->br4 = CONFIG_SYS_BR4_PRELIM; + out_be32(&memctl->or4, CONFIG_SYS_OR4_PRELIM); + out_be32(&memctl->br4, CONFIG_SYS_BR4_PRELIM); #endif #if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - memctl->or5 = CONFIG_SYS_OR5_PRELIM; - memctl->br5 = CONFIG_SYS_BR5_PRELIM; + out_be32(&memctl->or5, CONFIG_SYS_OR5_PRELIM); + out_be32(&memctl->br5, CONFIG_SYS_BR5_PRELIM); #endif #if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - memctl->or6 = CONFIG_SYS_OR6_PRELIM; - memctl->br6 = CONFIG_SYS_BR6_PRELIM; + out_be32(&memctl->or6, CONFIG_SYS_OR6_PRELIM); + out_be32(&memctl->br6, CONFIG_SYS_BR6_PRELIM); #endif #if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - memctl->or7 = CONFIG_SYS_OR7_PRELIM; - memctl->br7 = CONFIG_SYS_BR7_PRELIM; + out_be32(&memctl->or7, CONFIG_SYS_OR7_PRELIM); + out_be32(&memctl->br7, CONFIG_SYS_BR7_PRELIM); #endif #if defined(CONFIG_CPM2) -- cgit v1.2.1 From 9ce3c228276b0f85105da8c39b164f2b6c84ea34 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 13 Apr 2010 11:07:57 -0500 Subject: 85xx: Fix compile warning cpu.c: In function 'checkcpu': cpu.c:47: warning: unused variable 'gur' Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc85xx/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 15b7b231ee..fddeb2fb09 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -44,7 +44,9 @@ int checkcpu (void) uint major, minor; struct cpu_type *cpu; char buf1[32], buf2[32]; +#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif /* CONFIG_FSL_CORENET */ #ifdef CONFIG_DDR_CLK_FREQ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; -- cgit v1.2.1 From 47106ce168890d637fd849682ba88ecfdb9c35de Mon Sep 17 00:00:00 2001 From: Detlev Zundel Date: Wed, 14 Apr 2010 11:32:20 +0200 Subject: 85xx/socrates: Remove NFS support to fit image size. This fixes an overflow during the link phase. Signed-off-by: Detlev Zundel Signed-off-by: Kumar Gala --- include/configs/socrates.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 96410413a0..89f7cc4a19 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -174,7 +174,7 @@ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384KiB for Mon */ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4 MB for malloc */ /* FPGA and NAND */ @@ -342,19 +342,19 @@ */ #include +#define CONFIG_CMD_BMP #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_DTT #undef CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_I2C #define CONFIG_CMD_SDRAM #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS +#undef CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_BMP #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI -- cgit v1.2.1 From 0c955dafab495fef5a76f5383387281d0408056c Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Wed, 14 Apr 2010 19:05:06 +0800 Subject: 85xx: clean up the io_sel for PCI express of P1022 clean up the wrong io_sel for PCI express according to latest manual. Signed-off-by: Dave Liu Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc8xxx/pci_cfg.c | 13 ++++++------- arch/powerpc/include/asm/immap_85xx.h | 5 +++++ 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/cpu/mpc8xxx/pci_cfg.c b/arch/powerpc/cpu/mpc8xxx/pci_cfg.c index 9b7181d5b6..85995cac95 100644 --- a/arch/powerpc/cpu/mpc8xxx/pci_cfg.c +++ b/arch/powerpc/cpu/mpc8xxx/pci_cfg.c @@ -176,15 +176,14 @@ static struct pci_info pci_config_info[] = (1 << 0x1d) | (1 << 0x1e) | (1 << 0x1f), }, [LAW_TRGT_IF_PCIE_2] = { - .cfg = (1 << 0) | (1 << 1) | (1 << 6) | (1 << 7) | - (1 << 9) | (1 << 0xa) | (1 << 0xb) | (1 << 0xd) | - (1 << 0x15) | (1 << 0x16) | (1 << 0x17) | - (1 << 0x18) | (1 << 0x1c), + .cfg = (1 << 1) | (1 << 6) | (1 << 7) | (1 << 9) | + (1 << 0xd) | (1 << 0x15) | (1 << 0x16) | (1 << 0x17) | + (1 << 0x18) | (1 << 0x19) | (1 << 0x1a) | (1 << 0x1b), }, [LAW_TRGT_IF_PCIE_3] = { - .cfg = (1 << 6) | (1 << 7) | (1 << 9) | (1 << 0xd) | - (1 << 0x15) | (1 << 0x16) | (1 << 0x17) | (1 << 0x18) | - (1 << 0x19) | (1 << 0x1a) | (1 << 0x1b), + .cfg = (1 << 0) | (1 << 1) | (1 << 6) | (1 << 7) | (1 << 9) | + (1 << 0xa) | (1 << 0xb) | (1 << 0xd) | (1 << 0x15) | + (1 << 0x16) | (1 << 0x17) | (1 << 0x18) | (1 << 0x1c), }, }; #elif defined(CONFIG_P2010) || defined(CONFIG_P2020) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index ef3a1e1c03..e7954e657c 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1873,8 +1873,13 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000 #define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000 #define MPC85xx_PORDEVSR_PCI1 0x00800000 +#if defined(CONFIG_P1013) || defined(CONFIG_P1022) +#define MPC85xx_PORDEVSR_IO_SEL 0x007c0000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 18 +#else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 +#endif #define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000 #define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000 #define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000 -- cgit v1.2.1 From 3f0202ed13add5fd6e2ed66fcb3f5e1228cdf766 Mon Sep 17 00:00:00 2001 From: Lan Chunhe Date: Wed, 21 Apr 2010 07:40:50 -0500 Subject: mpc85xx: Add the ability to set LCRR[CLKDIV] to improve R/W speed of flash Signed-off-by: Lan Chunhe Signed-off-by: Roy Zang Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc85xx/cpu_init.c | 15 +++++++++++++++ arch/powerpc/include/asm/fsl_lbc.h | 6 +++++- 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index b517e06608..e578b296df 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -260,6 +260,10 @@ void cpu_init_f (void) int cpu_init_r(void) { +#ifdef CONFIG_SYS_LBC_LCRR + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); +#endif + puts ("L2: "); #if defined(CONFIG_L2_CACHE) @@ -383,6 +387,17 @@ int cpu_init_r(void) #if defined(CONFIG_MP) setup_mp(); #endif + +#ifdef CONFIG_SYS_LBC_LCRR + /* + * Modify the CLKDIV field of LCRR register to improve the writing + * speed for NOR flash. + */ + clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR); + __raw_readl(&lbc->lcrr); + isync(); +#endif + return 0; } diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 5723de643a..dfe8f793a3 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2008,2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -125,8 +125,12 @@ #define OR_GPCM_SETA_SHIFT 3 #define OR_GPCM_TRLX 0x00000004 #define OR_GPCM_TRLX_SHIFT 2 +#define OR_GPCM_TRLX_CLEAR 0x00000000 +#define OR_GPCM_TRLX_SET 0x00000004 #define OR_GPCM_EHTR 0x00000002 #define OR_GPCM_EHTR_SHIFT 1 +#define OR_GPCM_EHTR_CLEAR 0x00000000 +#define OR_GPCM_EHTR_SET 0x00000002 #define OR_GPCM_EAD 0x00000001 #define OR_GPCM_EAD_SHIFT 0 -- cgit v1.2.1 From 7e1afb62a7e68843248b9a76a265c9193e716768 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 20 Apr 2010 10:02:24 -0500 Subject: ppc: Split MPC83xx SERDES code from MPC85xx/MPC86xx/QorIQ The MPC83xx SERDES control is different from the other FSL PPC chips. For now lets split it out so we can standardize on interfaces for determining of a device on SERDES is configured. Signed-off-by: Kumar Gala Acked-by: Kim Phillips --- arch/powerpc/cpu/mpc83xx/serdes.c | 2 +- arch/powerpc/include/asm/fsl_mpc83xx_serdes.h | 36 +++++++++++++++++++++++++++ board/freescale/mpc837xemds/mpc837xemds.c | 2 +- board/freescale/mpc837xemds/pci.c | 2 +- board/freescale/mpc837xerdb/mpc837xerdb.c | 2 +- 5 files changed, 40 insertions(+), 4 deletions(-) create mode 100644 arch/powerpc/include/asm/fsl_mpc83xx_serdes.h diff --git a/arch/powerpc/cpu/mpc83xx/serdes.c b/arch/powerpc/cpu/mpc83xx/serdes.c index 64033fe4c3..fecfc80f81 100644 --- a/arch/powerpc/cpu/mpc83xx/serdes.c +++ b/arch/powerpc/cpu/mpc83xx/serdes.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include /* SerDes registers */ #define FSL_SRDSCR0_OFFS 0x0 diff --git a/arch/powerpc/include/asm/fsl_mpc83xx_serdes.h b/arch/powerpc/include/asm/fsl_mpc83xx_serdes.h new file mode 100644 index 0000000000..2d813f4188 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_mpc83xx_serdes.h @@ -0,0 +1,36 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FSL_MPC83XX_SERDES_H +#define __FSL_MPC83XX_SERDES_H + +#include + +#define FSL_SERDES_CLK_100 (0 << 28) +#define FSL_SERDES_CLK_125 (1 << 28) +#define FSL_SERDES_CLK_150 (3 << 28) +#define FSL_SERDES_PROTO_SATA 0 +#define FSL_SERDES_PROTO_PEX 1 +#define FSL_SERDES_PROTO_PEX_X2 2 +#define FSL_SERDES_PROTO_SGMII 3 +#define FSL_SERDES_VDD_1V 1 + +extern void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd); + +#endif /* __FSL_MPC83XX_SERDES_H */ diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index 9d8b18d993..32a87adb9e 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c index 6b7b8b2e7f..82f34f85c8 100644 --- a/board/freescale/mpc837xemds/pci.c +++ b/board/freescale/mpc837xemds/pci.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include static struct pci_region pci_regions[] = { { diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index c5c2e40833..d636796f85 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #include #include -- cgit v1.2.1