From 9a65b8754c57e8640e208b9743272b9c74527e0e Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Mon, 29 Oct 2012 05:23:49 +0000 Subject: ahci: Optimise AHCI controller reset and start-up The existing code waits a whole second for the AHCI controller to reset. Instead, let's poll the status register to see if the reset has succeeded and return earlier if possible. This brings down the time for AHCI probing from 1s to 20ms. Signed-off-by: Stefan Reinauer Signed-off-by: Simon Glass --- drivers/block/ahci.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index d94da1f05a..ad397dcb6a 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -110,13 +110,15 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) /* reset must complete within 1 second, or * the hardware should be considered fried. */ - ssleep(1); - - tmp = readl(mmio + HOST_CTL); - if (tmp & HOST_RESET) { - debug("controller reset failed (0x%x)\n", tmp); - return -1; - } + i = 1000; + do { + udelay(1000); + tmp = readl(mmio + HOST_CTL); + if (!i--) { + debug("controller reset failed (0x%x)\n", tmp); + return -1; + } + } while (tmp & HOST_RESET); writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL); writel(cap_save, mmio + HOST_CAP); @@ -164,13 +166,17 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD); j = 0; - while (j < 100) { - msleep(10); + while (j < 1000) { tmp = readl(port_mmio + PORT_SCR_STAT); if ((tmp & 0xf) == 0x3) break; + udelay(1000); j++; } + if (j == 1000) + debug("timeout.\n"); + else + debug("ok.\n"); tmp = readl(port_mmio + PORT_SCR_ERR); debug("PORT_SCR_ERR 0x%x\n", tmp); -- cgit v1.2.1