From 89c05fa51f41e4491e877533afa7c972608f23ae Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 17 Dec 2015 17:47:43 +0900 Subject: ARM: uniphier: split ProXstream2 board data and change DDR frequency The DDR3 memory chips on ProXstream2 boards support up to 2133 MHz, while only up to 1866MHz on PH1-LD6b boards. Split the board data structure and change the DDR frequency of ProXstream2 boards to 2133 MHz. Signed-off-by: Masahiro Yamada --- arch/arm/mach-uniphier/boards.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c index f3281433c2..d075a11ca2 100644 --- a/arch/arm/mach-uniphier/boards.c +++ b/arch/arm/mach-uniphier/boards.c @@ -74,9 +74,23 @@ static const struct uniphier_board_data ph1_pro5_data = { }; #endif -#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ - defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) static const struct uniphier_board_data proxstream2_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x40000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xc0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_ch2_base = 0xe0000000, + .dram_ch2_size = 0x20000000, + .dram_ch2_width = 16, + .dram_freq = 2133, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) +static const struct uniphier_board_data ph1_ld6b_data = { .dram_ch0_base = 0x80000000, .dram_ch0_size = 0x40000000, .dram_ch0_width = 32, @@ -115,7 +129,7 @@ static const struct uniphier_board_id uniphier_boards[] = { { "socionext,proxstream2", &proxstream2_data, }, #endif #if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) - { "socionext,ph1-ld6b", &proxstream2_data, }, + { "socionext,ph1-ld6b", &ph1_ld6b_data, }, #endif }; -- cgit v1.2.1