From 151d63cb9145b5eeb4585cb1b5a9c95f985a0e12 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Mon, 20 Aug 2012 09:54:53 +0000 Subject: mx35: Clean up lowlevel_init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Clean up mx35 lowlevel_init: - Indent with tabs. - Fix comments. - Use defined values instead of literal constants. - Use defined macros instead of duplicating code. - Use macro parameters with default values instead of #define'd configs. Signed-off-by: Benoît Thébaudeau Cc: Stefano Babic --- arch/arm/include/asm/arch-mx35/lowlevel_macro.S | 191 ++++++++++++------------ board/CarMediaLab/flea3/lowlevel_init.S | 41 ----- board/freescale/mx35pdk/lowlevel_init.S | 119 +-------------- board/freescale/mx35pdk/mx35pdk.h | 25 ---- 4 files changed, 97 insertions(+), 279 deletions(-) diff --git a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S index 05aa951d10..bc6dbea665 100644 --- a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S +++ b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S @@ -19,122 +19,121 @@ * MA 02111-1307 USA */ +#include +#include +#include + /* * AIPS setup - Only setup MPROTx registers. * The PACR default values are good. + * + * Default argument values: + * - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to + * user-mode. + * - OPACR: Clear the on and off peripheral modules Supervisor Protect bit for + * SDMA to access them. */ -.macro init_aips - /* - * Set all MPROTx to be non-bufferable, trusted for R/W, - * not forced to user-mode. - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =AIPS_MPR_CONFIG - str r1, [r0, #0x00] - str r1, [r0, #0x04] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x00] - str r1, [r0, #0x04] +.macro init_aips mpr=0x77777777, opacr=0x00000000 + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =\mpr + str r1, [r0, #AIPS_MPR_0_7] + str r1, [r0, #AIPS_MPR_8_15] + ldr r2, =AIPS2_BASE_ADDR + str r1, [r2, #AIPS_MPR_0_7] + str r1, [r2, #AIPS_MPR_8_15] - /* - * Clear the on and off peripheral modules Supervisor Protect bit - * for SDMA to access them. Did not change the AIPS control registers - * (offset 0x20) access type - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =AIPS_OPACR_CONFIG - str r1, [r0, #0x40] - str r1, [r0, #0x44] - str r1, [r0, #0x48] - str r1, [r0, #0x4C] - str r1, [r0, #0x50] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x40] - str r1, [r0, #0x44] - str r1, [r0, #0x48] - str r1, [r0, #0x4C] - str r1, [r0, #0x50] + /* Did not change the AIPS control registers access type. */ + ldr r1, =\opacr + str r1, [r0, #AIPS_OPACR_0_7] + str r1, [r0, #AIPS_OPACR_8_15] + str r1, [r0, #AIPS_OPACR_16_23] + str r1, [r0, #AIPS_OPACR_24_31] + str r1, [r0, #AIPS_OPACR_32_39] + str r1, [r2, #AIPS_OPACR_0_7] + str r1, [r2, #AIPS_OPACR_8_15] + str r1, [r2, #AIPS_OPACR_16_23] + str r1, [r2, #AIPS_OPACR_24_31] + str r1, [r2, #AIPS_OPACR_32_39] .endm -/* MAX (Multi-Layer AHB Crossbar Switch) setup */ -.macro init_max - ldr r0, =MAX_BASE_ADDR - /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ - ldr r1, =MAX_MPR_CONFIG - str r1, [r0, #0x000] /* for S0 */ - str r1, [r0, #0x100] /* for S1 */ - str r1, [r0, #0x200] /* for S2 */ - str r1, [r0, #0x300] /* for S3 */ - str r1, [r0, #0x400] /* for S4 */ - /* SGPCR - always park on last master */ - ldr r1, =MAX_SGPCR_CONFIG - str r1, [r0, #0x010] /* for S0 */ - str r1, [r0, #0x110] /* for S1 */ - str r1, [r0, #0x210] /* for S2 */ - str r1, [r0, #0x310] /* for S3 */ - str r1, [r0, #0x410] /* for S4 */ - /* MGPCR - restore default values */ - ldr r1, =MAX_MGPCR_CONFIG - str r1, [r0, #0x800] /* for M0 */ - str r1, [r0, #0x900] /* for M1 */ - str r1, [r0, #0xA00] /* for M2 */ - str r1, [r0, #0xB00] /* for M3 */ - str r1, [r0, #0xC00] /* for M4 */ - str r1, [r0, #0xD00] /* for M5 */ +/* + * MAX (Multi-Layer AHB Crossbar Switch) setup + * + * Default argument values: + * - MPR: priority is M4 > M2 > M3 > M5 > M0 > M1 + * - SGPCR: always park on last master + * - MGPCR: restore default values + */ +.macro init_max mpr=0x00302154, sgpcr=0x00000010, mgpcr=0x00000000 + ldr r0, =MAX_BASE_ADDR + ldr r1, =\mpr + str r1, [r0, #MAX_MPR0] /* for S0 */ + str r1, [r0, #MAX_MPR1] /* for S1 */ + str r1, [r0, #MAX_MPR2] /* for S2 */ + str r1, [r0, #MAX_MPR3] /* for S3 */ + str r1, [r0, #MAX_MPR4] /* for S4 */ + ldr r1, =\sgpcr + str r1, [r0, #MAX_SGPCR0] /* for S0 */ + str r1, [r0, #MAX_SGPCR1] /* for S1 */ + str r1, [r0, #MAX_SGPCR2] /* for S2 */ + str r1, [r0, #MAX_SGPCR3] /* for S3 */ + str r1, [r0, #MAX_SGPCR4] /* for S4 */ + ldr r1, =\mgpcr + str r1, [r0, #MAX_MGPCR0] /* for M0 */ + str r1, [r0, #MAX_MGPCR1] /* for M1 */ + str r1, [r0, #MAX_MGPCR2] /* for M2 */ + str r1, [r0, #MAX_MGPCR3] /* for M3 */ + str r1, [r0, #MAX_MGPCR4] /* for M4 */ + str r1, [r0, #MAX_MGPCR5] /* for M5 */ .endm -/* M3IF setup */ -.macro init_m3if - /* Configure M3IF registers */ - ldr r1, =M3IF_BASE_ADDR - /* - * M3IF Control Register (M3IFCTL) - * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 - * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 - * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 - * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 - * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 - * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 - * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 - * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 - * ------------ - * 0x00000040 - */ - ldr r0, =M3IF_CONFIG - str r0, [r1] /* M3IF control reg */ +/* + * M3IF setup + * + * Default argument values: + * - CTL: + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = L2CC1 not on priority list (0 << 1) = 0x00000000 + * MRRP[2] = MBX not on priority list (0 << 2) = 0x00000000 + * MRRP[3] = MAX1 not on priority list (0 << 3) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 4) = 0x00000000 + * MRRP[5] = MPEG4 not on priority list (0 << 5) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 7) = 0x00000000 + * ------------ + * 0x00000040 + */ +.macro init_m3if ctl=0x00000040 + /* M3IF Control Register (M3IFCTL) */ + write32 M3IF_BASE_ADDR, \ctl .endm .macro core_init - mrc 15, 0, r1, c1, c0, 0 + mrc p15, 0, r1, c1, c0, 0 - mrc 15, 0, r0, c1, c0, 1 - orr r0, r0, #7 - mcr 15, 0, r0, c1, c0, 1 - orr r1, r1, #(1<<11) + /* Set branch prediction enable */ + mrc p15, 0, r0, c1, c0, 1 + orr r0, r0, #7 + mcr p15, 0, r0, c1, c0, 1 + orr r1, r1, #1 << 11 /* Set unaligned access enable */ - orr r1, r1, #(1<<22) + orr r1, r1, #1 << 22 /* Set low int latency enable */ - orr r1, r1, #(1<<21) + orr r1, r1, #1 << 21 - mcr 15, 0, r1, c1, c0, 0 + mcr p15, 0, r1, c1, c0, 0 - mov r0, #0 + mov r0, #0 - /* Set branch prediction enable */ - mcr 15, 0, r0, c15, c2, 4 + mcr p15, 0, r0, c15, c2, 4 - mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ - mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */ - mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ + mcr p15, 0, r0, c7, c7, 0 /* Invalidate I cache and D cache */ + mcr p15, 0, r0, c8, c7, 0 /* Invalidate TLBs */ + mcr p15, 0, r0, c7, c10, 4 /* Drain the write buffer */ - /* - * initializes very early AIPS - * Then it also initializes Multi-Layer AHB Crossbar Switch, - * M3IF - * Also setup the Peripheral Port Remap register inside the core - */ - ldr r0, =0x40000015 /* start from AIPS 2GB region */ - mcr p15, 0, r0, c15, c2, 4 + /* Setup the Peripheral Port Memory Remap Register */ + ldr r0, =0x40000015 /* Start from AIPS 2-GB region */ + mcr p15, 0, r0, c15, c2, 4 .endm diff --git a/board/CarMediaLab/flea3/lowlevel_init.S b/board/CarMediaLab/flea3/lowlevel_init.S index 2f42fc97af..57fb1b139e 100644 --- a/board/CarMediaLab/flea3/lowlevel_init.S +++ b/board/CarMediaLab/flea3/lowlevel_init.S @@ -22,47 +22,6 @@ */ #include -#include -#include -#include - -/* - * Configuration for the flea3 board. - * These defines are used by the included macros and must - * be defined first - */ -#define AIPS_MPR_CONFIG 0x77777777 -#define AIPS_OPACR_CONFIG 0x00000000 - -/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ -#define MAX_MPR_CONFIG 0x00302154 - -/* SGPCR - always park on last master */ -#define MAX_SGPCR_CONFIG 0x00000010 - -/* MGPCR - restore default values */ -#define MAX_MGPCR_CONFIG 0x00000000 - -/* - * M3IF Control Register (M3IFCTL) - * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 - * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 - * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 - * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 - * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 - * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 - * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 - * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 - * ------------ - * 0x00000040 - */ -#define M3IF_CONFIG 0x00000040 - -#define CCM_PDR0_CONFIG 0x00801000 - -/* - * includes MX35 utility macros - */ #include .globl lowlevel_init diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S index 698c4cf0c5..75bb958619 100644 --- a/board/freescale/mx35pdk/lowlevel_init.S +++ b/board/freescale/mx35pdk/lowlevel_init.S @@ -23,6 +23,7 @@ #include #include #include "mx35pdk.h" +#include /* * return soc version @@ -40,91 +41,6 @@ addne \ret, \ret, #0x10 .endm -/* - * AIPS setup - Only setup MPROTx registers. - * The PACR default values are good. - */ -.macro init_aips - /* - * Set all MPROTx to be non-bufferable, trusted for R/W, - * not forced to user-mode. - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =AIPS_MPR_CONFIG - str r1, [r0, #0x00] - str r1, [r0, #0x04] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x00] - str r1, [r0, #0x04] - - /* - * Clear the on and off peripheral modules Supervisor Protect bit - * for SDMA to access them. Did not change the AIPS control registers - * (offset 0x20) access type - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =AIPS_OPACR_CONFIG - str r1, [r0, #0x40] - str r1, [r0, #0x44] - str r1, [r0, #0x48] - str r1, [r0, #0x4C] - str r1, [r0, #0x50] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x40] - str r1, [r0, #0x44] - str r1, [r0, #0x48] - str r1, [r0, #0x4C] - str r1, [r0, #0x50] -.endm - -/* MAX (Multi-Layer AHB Crossbar Switch) setup */ -.macro init_max - ldr r0, =MAX_BASE_ADDR - /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ - ldr r1, =MAX_MPR_CONFIG - str r1, [r0, #0x000] /* for S0 */ - str r1, [r0, #0x100] /* for S1 */ - str r1, [r0, #0x200] /* for S2 */ - str r1, [r0, #0x300] /* for S3 */ - str r1, [r0, #0x400] /* for S4 */ - /* SGPCR - always park on last master */ - ldr r1, =MAX_SGPCR_CONFIG - str r1, [r0, #0x010] /* for S0 */ - str r1, [r0, #0x110] /* for S1 */ - str r1, [r0, #0x210] /* for S2 */ - str r1, [r0, #0x310] /* for S3 */ - str r1, [r0, #0x410] /* for S4 */ - /* MGPCR - restore default values */ - ldr r1, =MAX_MGPCR_CONFIG - str r1, [r0, #0x800] /* for M0 */ - str r1, [r0, #0x900] /* for M1 */ - str r1, [r0, #0xA00] /* for M2 */ - str r1, [r0, #0xB00] /* for M3 */ - str r1, [r0, #0xC00] /* for M4 */ - str r1, [r0, #0xD00] /* for M5 */ -.endm - -/* M3IF setup */ -.macro init_m3if - /* Configure M3IF registers */ - ldr r1, =M3IF_BASE_ADDR - /* - * M3IF Control Register (M3IFCTL) - * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 - * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 - * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 - * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 - * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 - * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 - * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 - * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 - * ------------ - * 0x00000040 - */ - ldr r0, =M3IF_CONFIG - str r0, [r1] /* M3IF control reg */ -.endm - /* CPLD on CS5 setup */ .macro init_debug_board ldr r0, =DBG_BASE_ADDR @@ -210,38 +126,7 @@ lowlevel_init: mov r10, lr - mrc 15, 0, r1, c1, c0, 0 - - mrc 15, 0, r0, c1, c0, 1 - orr r0, r0, #7 - mcr 15, 0, r0, c1, c0, 1 - orr r1, r1, #(1<<11) - - /* Set unaligned access enable */ - orr r1, r1, #(1<<22) - - /* Set low int latency enable */ - orr r1, r1, #(1<<21) - - mcr 15, 0, r1, c1, c0, 0 - - mov r0, #0 - - /* Set branch prediction enable */ - mcr 15, 0, r0, c15, c2, 4 - - mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ - mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */ - mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ - - /* - * initializes very early AIPS - * Then it also initializes Multi-Layer AHB Crossbar Switch, - * M3IF - * Also setup the Peripheral Port Remap register inside the core - */ - ldr r0, =0x40000015 /* start from AIPS 2GB region */ - mcr p15, 0, r0, c15, c2, 4 + core_init init_aips diff --git a/board/freescale/mx35pdk/mx35pdk.h b/board/freescale/mx35pdk/mx35pdk.h index 6aeb21835b..f15aa4f7be 100644 --- a/board/freescale/mx35pdk/mx35pdk.h +++ b/board/freescale/mx35pdk/mx35pdk.h @@ -26,31 +26,6 @@ #ifndef __BOARD_MX35_3STACK_H #define __BOARD_MX35_3STACK_H -#define AIPS_MPR_CONFIG 0x77777777 -#define AIPS_OPACR_CONFIG 0x00000000 - -/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ -#define MAX_MPR_CONFIG 0x00302154 -/* SGPCR - always park on last master */ -#define MAX_SGPCR_CONFIG 0x00000010 -/* MGPCR - restore default values */ -#define MAX_MGPCR_CONFIG 0x00000000 - -/* - * M3IF Control Register (M3IFCTL) - * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 - * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 - * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 - * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 - * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 - * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 - * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 - * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 - * ------------ - * 0x00000040 - */ -#define M3IF_CONFIG 0x00000040 - #define DBG_BASE_ADDR WEIM_CTRL_CS5 #define DBG_CSCR_U_CONFIG 0x0000D843 #define DBG_CSCR_L_CONFIG 0x22252521 -- cgit v1.2.1 From 6e3dc127545247f123de063a6a101960e3eb2ccd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Thu, 27 Sep 2012 10:26:02 +0000 Subject: mx35: Fix eSDHC clocks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Each eSDHC instance has a dedicated clock. gd->sdhc_clk must also be set accordingly. This is good for the case only a single SDHC instance is used (initialization made with fsl_esdhc_mmc_init()). A future patch will fix the multi-instance use case (initialization made directly with fsl_esdhc_initialize()). Signed-off-by: Benoît Thébaudeau Cc: Stefano Babic Cc: Eric Bénard Cc: Otavio Salvador --- arch/arm/cpu/arm1136/mx35/generic.c | 14 ++++++++++++-- arch/arm/include/asm/arch-mx35/clock.h | 4 +++- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index 7dc1a8ec58..41e9639d9c 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -361,8 +361,12 @@ unsigned int mxc_get_clock(enum mxc_clock clk) return get_ipg_per_clk(); case MXC_UART_CLK: return imx_get_uartclk(); - case MXC_ESDHC_CLK: + case MXC_ESDHC1_CLK: return mxc_get_peri_clock(ESDHC1_CLK); + case MXC_ESDHC2_CLK: + return mxc_get_peri_clock(ESDHC2_CLK); + case MXC_ESDHC3_CLK: + return mxc_get_peri_clock(ESDHC3_CLK); case MXC_USB_CLK: return mxc_get_main_clock(USB_CLK); case MXC_FEC_CLK: @@ -472,7 +476,13 @@ int cpu_mmc_init(bd_t *bis) int get_clocks(void) { #ifdef CONFIG_FSL_ESDHC - gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); +#if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR + gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); +#elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR + gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); +#else + gd->sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); +#endif #endif return 0; } diff --git a/arch/arm/include/asm/arch-mx35/clock.h b/arch/arm/include/asm/arch-mx35/clock.h index 2eff08d1d4..00679ef6a9 100644 --- a/arch/arm/include/asm/arch-mx35/clock.h +++ b/arch/arm/include/asm/arch-mx35/clock.h @@ -44,7 +44,9 @@ enum mxc_clock { MXC_IPG_CLK, MXC_IPG_PERCLK, MXC_UART_CLK, - MXC_ESDHC_CLK, + MXC_ESDHC1_CLK, + MXC_ESDHC2_CLK, + MXC_ESDHC3_CLK, MXC_USB_CLK, MXC_CSPI_CLK, MXC_FEC_CLK, -- cgit v1.2.1 From a2ac1b3a7d8e685e8fe3805b3169f3dac5c06cf8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Mon, 1 Oct 2012 08:36:25 +0000 Subject: mxc: Fix SDHC multi-instance clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On mxc, each SDHC instance has a dedicated clock, so gd->sdhc_clk is not suitable for the multi-instance use case (initialization made directly with fsl_esdhc_initialize()). This patch fixes this issue by adding a configuration field for the SDHC input clock frequency. Signed-off-by: Benoît Thébaudeau Cc: Stefano Babic Cc: Eric Bénard Cc: Otavio Salvador Cc: Fabio Estevam Cc: Jason Liu Cc: Matt Sealey Cc: Andy Fleming --- board/esg/ima3-mx53/ima3-mx53.c | 1 + board/freescale/mx35pdk/mx35pdk.c | 2 ++ board/freescale/mx51evk/mx51evk.c | 4 ++++ board/freescale/mx53ard/mx53ard.c | 4 ++++ board/freescale/mx53evk/mx53evk.c | 4 ++++ board/freescale/mx53loco/mx53loco.c | 3 +++ board/freescale/mx53smd/mx53smd.c | 3 +++ board/freescale/mx6qarm2/mx6qarm2.c | 4 ++++ board/freescale/mx6qsabreauto/mx6qsabreauto.c | 1 + board/freescale/mx6qsabrelite/mx6qsabrelite.c | 3 +++ board/freescale/mx6qsabresd/mx6qsabresd.c | 1 + board/genesi/mx51_efikamx/efikamx.c | 4 ++++ board/ttcontrol/vision2/vision2.c | 2 ++ drivers/mmc/fsl_esdhc.c | 5 +++-- include/fsl_esdhc.h | 1 + 15 files changed, 40 insertions(+), 2 deletions(-) diff --git a/board/esg/ima3-mx53/ima3-mx53.c b/board/esg/ima3-mx53/ima3-mx53.c index e947330a10..41d6bb6a9c 100644 --- a/board/esg/ima3-mx53/ima3-mx53.c +++ b/board/esg/ima3-mx53/ima3-mx53.c @@ -217,6 +217,7 @@ int board_mmc_init(bd_t *bis) PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg); } #endif diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index 7cb6b3086f..a12531fb89 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -292,6 +293,7 @@ int board_mmc_init(bd_t *bis) mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC); mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC); + esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg); } diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index a94701cbf1..341295204c 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -358,6 +359,9 @@ int board_mmc_init(bd_t *bis) u32 index; s32 status = 0; + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c index 08c779559a..2fc8570f23 100644 --- a/board/freescale/mx53ard/mx53ard.c +++ b/board/freescale/mx53ard/mx53ard.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -106,6 +107,9 @@ int board_mmc_init(bd_t *bis) u32 index; s32 status = 0; + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index b11a94c652..bb4621d62e 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -232,6 +233,9 @@ int board_mmc_init(bd_t *bis) u32 index; s32 status = 0; + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 65432099a1..20569a5a92 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -192,6 +192,9 @@ int board_mmc_init(bd_t *bis) u32 index; s32 status = 0; + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c index 7f35dddb84..761f727d08 100644 --- a/board/freescale/mx53smd/mx53smd.c +++ b/board/freescale/mx53smd/mx53smd.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -144,6 +145,8 @@ int board_mmc_init(bd_t *bis) u32 index; s32 status = 0; + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index d43b3271b8..dad4b95576 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -139,6 +140,9 @@ int board_mmc_init(bd_t *bis) s32 status = 0; u32 index = 0; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { switch (index) { case 0: diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index fcd83dc59b..17ff8ffcaf 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -114,6 +114,7 @@ int board_mmc_init(bd_t *bis) { imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); } #endif diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 4b4e89b0e2..3af843792d 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -264,6 +264,9 @@ int board_mmc_init(bd_t *bis) s32 status = 0; u32 index = 0; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { switch (index) { case 0: diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c index 03a6857323..e02daa4a59 100644 --- a/board/freescale/mx6qsabresd/mx6qsabresd.c +++ b/board/freescale/mx6qsabresd/mx6qsabresd.c @@ -120,6 +120,7 @@ int board_mmc_init(bd_t *bis) { imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); } #endif diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c index cfd2e938b9..e334c0133c 100644 --- a/board/genesi/mx51_efikamx/efikamx.c +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -349,6 +350,9 @@ int board_mmc_init(bd_t *bis) gpio_direction_input(EFIKASB_SDHC1_CD); } + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); if (machine_is_efikasb()) { diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index f28eab070b..ba3307bb02 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -590,6 +591,7 @@ int board_mmc_init(bd_t *bis) mxc_iomux_set_pad(MX51_PIN_GPIO1_1, PAD_CTL_HYS_ENABLE); + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); } #endif diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 3f8d30db4c..aa6a9f13ea 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -410,12 +410,12 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) return 0; } -void set_sysctl(struct mmc *mmc, uint clock) +static void set_sysctl(struct mmc *mmc, uint clock) { - int sdhc_clk = gd->sdhc_clk; int div, pre_div; struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; + int sdhc_clk = cfg->sdhc_clk; uint clk; if (clock < mmc->f_min) @@ -598,6 +598,7 @@ int fsl_esdhc_mmc_init(bd_t *bis) cfg = malloc(sizeof(struct fsl_esdhc_cfg)); memset(cfg, 0, sizeof(struct fsl_esdhc_cfg)); cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR; + cfg->sdhc_clk = gd->sdhc_clk; return fsl_esdhc_initialize(bis, cfg); } diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index 4e321e762c..47d2fe4f18 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -167,6 +167,7 @@ struct fsl_esdhc_cfg { u32 esdhc_base; + u32 sdhc_clk; }; /* Select the correct accessors depending on endianess */ -- cgit v1.2.1 From 903e779c5537e1c87470f911a178e4463984e562 Mon Sep 17 00:00:00 2001 From: Otavio Salvador Date: Tue, 2 Oct 2012 09:22:10 +0000 Subject: mx6qsabreauto: Change mmcroot so it works out of box The mmcroot setting vary between mx6qsabreauto and mx6qsabresd so we move this to the board configuration file. Signed-off-by: Otavio Salvador Acked-by: Fabio Estevam --- include/configs/mx6qsabre_common.h | 2 +- include/configs/mx6qsabreauto.h | 3 ++- include/configs/mx6qsabresd.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index 247e8d6dde..e25e9439e5 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -86,7 +86,7 @@ "initrd_high=0xffffffff\0" \ "mmcdev=0\0" \ "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index a878dec89a..760f3ce0c9 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -1,7 +1,7 @@ /* * Copyright (C) 2012 Freescale Semiconductor, Inc. * - * Configuration settings for the Freescale i.MX6Q SabreSD board. + * Configuration settings for the Freescale i.MX6Q SabreAuto board. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -15,6 +15,7 @@ #define CONFIG_MACH_TYPE 3529 #define CONFIG_MXC_UART_BASE UART4_BASE #define CONFIG_CONSOLE_DEV "ttymxc3" +#define CONFIG_MMCROOT "/dev/mmcblk0p2" #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) #include "mx6qsabre_common.h" diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h index f2ce79e9ec..771d1297f7 100644 --- a/include/configs/mx6qsabresd.h +++ b/include/configs/mx6qsabresd.h @@ -20,6 +20,7 @@ #define CONFIG_MACH_TYPE 3980 #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONSOLE_DEV "ttymxc0" +#define CONFIG_MMCROOT "/dev/mmcblk1p2" #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) #include "mx6qsabre_common.h" -- cgit v1.2.1 From dce67bd548a8c21bf0998806825b0b90fce0e48d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 2 Oct 2012 11:20:12 +0000 Subject: mx6qsabreauto: Pass the board revision to the kernel The kernel from Freescale expects that the bootloader passes the board revision. Read the board revision and pass it via get_board_rev(). Without passing the board revision the kernel does not operate properly as the initialization of peripherals are different in revA versus revB boards. Signed-off-by: Fabio Estevam --- arch/arm/include/asm/arch-mx6/imx-regs.h | 6 ++++ board/freescale/mx6qsabreauto/mx6qsabreauto.c | 48 +++++++++++++++++++++++++-- 2 files changed, 52 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index dc737ba127..09ab010138 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -200,6 +200,12 @@ struct src { u32 gpr10; }; +/* OCOTP Registers */ +struct ocotp_regs { + u32 reserved[0x198]; + u32 gp1; /* 0x660 */ +}; + /* GPR3 bitfields */ #define IOMUXC_GPR3_GPU_DBG_OFFSET 29 #define IOMUXC_GPR3_GPU_DBG_MASK (3< #include #include +#include + DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ @@ -165,9 +167,38 @@ int board_eth_init(bd_t *bis) return 0; } +#define BOARD_REV_B 0x200 +#define BOARD_REV_A 0x100 + +static int mx6sabre_rev(void) +{ + /* + * Get Board ID information from OCOTP_GP1[15:8] + * i.MX6Q ARD RevA: 0x01 + * i.MX6Q ARD RevB: 0x02 + */ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + int reg = readl(&ocotp->gp1); + int ret; + + switch (reg >> 8 & 0x0F) { + case 0x02: + ret = BOARD_REV_B; + break; + case 0x01: + default: + ret = BOARD_REV_A; + break; + } + + return ret; +} + u32 get_board_rev(void) { - return 0x63000; + int rev = mx6sabre_rev(); + + return (get_cpu_rev() & ~(0xF << 8)) | rev; } int board_early_init_f(void) @@ -187,7 +218,20 @@ int board_init(void) int checkboard(void) { - puts("Board: MX6Q-Sabreauto\n"); + int rev = mx6sabre_rev(); + char *revname; + + switch (rev) { + case BOARD_REV_B: + revname = "B"; + break; + case BOARD_REV_A: + default: + revname = "A"; + break; + } + + printf("Board: MX6Q-Sabreauto rev%s\n", revname); return 0; } -- cgit v1.2.1 From 5ae28d2db28695e5f0c0f2aab2187536cac9af6c Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Wed, 3 Oct 2012 07:26:37 +0000 Subject: i.MX: iomux: input pad array can be const Signed-off-by: Eric Nelson Signed-off-by: Stefano Babic --- arch/arm/imx-common/iomux-v3.c | 5 +++-- arch/arm/include/asm/imx-common/iomux-v3.h | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index da093fbe14..08fad7851c 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -54,9 +54,10 @@ int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) return 0; } -int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) +int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, + unsigned count) { - iomux_v3_cfg_t *p = pad_list; + iomux_v3_cfg_t const *p = pad_list; int i; int ret; diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 4558f4fba2..c34bb76ad4 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -98,6 +98,7 @@ typedef u64 iomux_v3_cfg_t; #define MUX_CONFIG_SION (0x1 << 4) int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); -int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count); +int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, + unsigned count); #endif /* __MACH_IOMUX_V3_H__*/ -- cgit v1.2.1 From 6e14232010ad7d105e40511ff5e19a3990050511 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Wed, 3 Oct 2012 07:26:38 +0000 Subject: i.MX: declare iomux_v3_cfg_t arrays as const Signed-off-by: Eric Nelson --- board/freescale/mx6qarm2/mx6qarm2.c | 8 ++++---- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 6 +++--- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 18 +++++++++--------- board/freescale/mx6qsabresd/mx6qsabresd.c | 6 +++--- board/genesi/mx51_efikamx/efikamx.c | 16 ++++++++-------- 5 files changed, 27 insertions(+), 27 deletions(-) diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index dad4b95576..ee20d4fc28 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -54,12 +54,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t uart4_pads[] = { +iomux_v3_cfg_t const uart4_pads[] = { MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t usdhc3_pads[] = { +iomux_v3_cfg_t const usdhc3_pads[] = { MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -73,7 +73,7 @@ iomux_v3_cfg_t usdhc3_pads[] = { MX6Q_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; -iomux_v3_cfg_t usdhc4_pads[] = { +iomux_v3_cfg_t const usdhc4_pads[] = { MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -86,7 +86,7 @@ iomux_v3_cfg_t usdhc4_pads[] = { MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; -iomux_v3_cfg_t enet_pads[] = { +iomux_v3_cfg_t const enet_pads[] = { MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index bd87901f4a..9e3700e1ee 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -53,12 +53,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t uart4_pads[] = { +iomux_v3_cfg_t const uart4_pads[] = { MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t enet_pads[] = { +iomux_v3_cfg_t const enet_pads[] = { MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -81,7 +81,7 @@ static void setup_iomux_enet(void) imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); } -iomux_v3_cfg_t usdhc3_pads[] = { +iomux_v3_cfg_t const usdhc3_pads[] = { MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 3af843792d..c19e83c729 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -70,12 +70,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t uart1_pads[] = { +iomux_v3_cfg_t const uart1_pads[] = { MX6Q_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), MX6Q_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t uart2_pads[] = { +iomux_v3_cfg_t const uart2_pads[] = { MX6Q_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), MX6Q_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; @@ -124,7 +124,7 @@ struct i2c_pads_info i2c_pad_info2 = { } }; -iomux_v3_cfg_t usdhc3_pads[] = { +iomux_v3_cfg_t const usdhc3_pads[] = { MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -134,7 +134,7 @@ iomux_v3_cfg_t usdhc3_pads[] = { MX6Q_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; -iomux_v3_cfg_t usdhc4_pads[] = { +iomux_v3_cfg_t const usdhc4_pads[] = { MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -144,7 +144,7 @@ iomux_v3_cfg_t usdhc4_pads[] = { MX6Q_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; -iomux_v3_cfg_t enet_pads1[] = { +iomux_v3_cfg_t const enet_pads1[] = { MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -170,7 +170,7 @@ iomux_v3_cfg_t enet_pads1[] = { MX6Q_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -iomux_v3_cfg_t enet_pads2[] = { +iomux_v3_cfg_t const enet_pads2[] = { MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -180,7 +180,7 @@ iomux_v3_cfg_t enet_pads2[] = { }; /* Button assignments for J14 */ -static iomux_v3_cfg_t button_pads[] = { +static iomux_v3_cfg_t const button_pads[] = { /* Menu */ MX6Q_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Back */ @@ -213,7 +213,7 @@ static void setup_iomux_enet(void) imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); } -iomux_v3_cfg_t usb_pads[] = { +iomux_v3_cfg_t const usb_pads[] = { MX6Q_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL), }; @@ -297,7 +297,7 @@ u32 get_board_rev(void) } #ifdef CONFIG_MXC_SPI -iomux_v3_cfg_t ecspi1_pads[] = { +iomux_v3_cfg_t const ecspi1_pads[] = { /* SS1 */ MX6Q_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL), MX6Q_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c index e02daa4a59..0240fb5479 100644 --- a/board/freescale/mx6qsabresd/mx6qsabresd.c +++ b/board/freescale/mx6qsabresd/mx6qsabresd.c @@ -51,12 +51,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t uart1_pads[] = { +iomux_v3_cfg_t const uart1_pads[] = { MX6Q_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), MX6Q_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t enet_pads[] = { +iomux_v3_cfg_t const enet_pads[] = { MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -86,7 +86,7 @@ static void setup_iomux_enet(void) gpio_set_value(IMX_GPIO_NR(1, 25), 1); } -iomux_v3_cfg_t usdhc3_pads[] = { +iomux_v3_cfg_t const usdhc3_pads[] = { MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c index e334c0133c..c2b2823ef9 100644 --- a/board/genesi/mx51_efikamx/efikamx.c +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -94,7 +94,7 @@ static u32 get_mx_rev(void) return (~rev & 0x7) + 1; } -static iomux_v3_cfg_t efikasb_revision_pads[] = { +static iomux_v3_cfg_t const efikasb_revision_pads[] = { MX51_PAD_EIM_CS3__GPIO2_28, MX51_PAD_EIM_CS4__GPIO2_29, }; @@ -141,7 +141,7 @@ int dram_init(void) /* * UART configuration */ -static iomux_v3_cfg_t efikamx_uart_pads[] = { +static iomux_v3_cfg_t const efikamx_uart_pads[] = { MX51_PAD_UART1_RXD__UART1_RXD, MX51_PAD_UART1_TXD__UART1_TXD, MX51_PAD_UART1_RTS__UART1_RTS, @@ -151,7 +151,7 @@ static iomux_v3_cfg_t efikamx_uart_pads[] = { /* * SPI configuration */ -static iomux_v3_cfg_t efikamx_spi_pads[] = { +static iomux_v3_cfg_t const efikamx_spi_pads[] = { MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, MX51_PAD_CSPI1_MISO__ECSPI1_MISO, MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, @@ -273,7 +273,7 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = { {MMC_SDHC2_BASE_ADDR}, }; -static iomux_v3_cfg_t efikamx_sdhc1_pads[] = { +static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = { MX51_PAD_SD1_CMD__SD1_CMD, MX51_PAD_SD1_CLK__SD1_CLK, MX51_PAD_SD1_DATA0__SD1_DATA0, @@ -285,7 +285,7 @@ static iomux_v3_cfg_t efikamx_sdhc1_pads[] = { #define EFIKAMX_SDHC1_WP IMX_GPIO_NR(1, 1) -static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = { +static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = { MX51_PAD_GPIO1_0__SD1_CD, MX51_PAD_EIM_CS2__SD1_CD, }; @@ -293,7 +293,7 @@ static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = { #define EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0) #define EFIKASB_SDHC1_CD IMX_GPIO_NR(2, 27) -static iomux_v3_cfg_t efikasb_sdhc2_pads[] = { +static iomux_v3_cfg_t const efikasb_sdhc2_pads[] = { MX51_PAD_SD2_CMD__SD2_CMD, MX51_PAD_SD2_CLK__SD2_CLK, MX51_PAD_SD2_DATA0__SD2_DATA0, @@ -372,7 +372,7 @@ int board_mmc_init(bd_t *bis) /* * PATA */ -static iomux_v3_cfg_t efikamx_pata_pads[] = { +static iomux_v3_cfg_t const efikamx_pata_pads[] = { MX51_PAD_NANDF_WE_B__PATA_DIOW, MX51_PAD_NANDF_RE_B__PATA_DIOR, MX51_PAD_NANDF_ALE__PATA_BUFFER_EN, @@ -423,7 +423,7 @@ static inline void setup_iomux_usb(void) { } #define EFIKAMX_LED_GREEN IMX_GPIO_NR(3, 14) #define EFIKAMX_LED_RED IMX_GPIO_NR(3, 15) -static iomux_v3_cfg_t efikasb_led_pads[] = { +static iomux_v3_cfg_t const efikasb_led_pads[] = { MX51_PAD_GPIO1_3__GPIO1_3, MX51_PAD_EIM_CS0__GPIO2_25, }; -- cgit v1.2.1 From 09c8bb264f27b89f31c5b6cbdab2393d68743e4e Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Wed, 3 Oct 2012 07:27:38 +0000 Subject: i.MX video: struct fb_videomode can be const Signed-off-by: Eric Nelson --- drivers/video/mxc_ipuv3_fb.c | 8 +++++--- include/ipu_pixfmt.h | 4 +++- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c index 47b336e7aa..ace226cece 100644 --- a/drivers/video/mxc_ipuv3_fb.c +++ b/drivers/video/mxc_ipuv3_fb.c @@ -45,7 +45,7 @@ static int mxcfb_unmap_video_memory(struct fb_info *fbi); /* graphics setup */ static GraphicDevice panel; -static struct fb_videomode *gmode; +static struct fb_videomode const *gmode; static uint8_t gdisp; static uint32_t gpixfmt; @@ -503,7 +503,7 @@ static struct fb_info *mxcfb_init_fbinfo(void) * @return Appropriate error code to the kernel common code */ static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp, - struct fb_videomode *mode) + struct fb_videomode const *mode) { struct fb_info *fbi; struct mxcfb_info *mxcfbi; @@ -619,7 +619,9 @@ void video_set_lut(unsigned int index, /* color number */ return; } -int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt) +int ipuv3_fb_init(struct fb_videomode const *mode, + uint8_t disp, + uint32_t pixfmt) { gmode = mode; gdisp = disp; diff --git a/include/ipu_pixfmt.h b/include/ipu_pixfmt.h index 4baa71187d..1163bf4b4e 100644 --- a/include/ipu_pixfmt.h +++ b/include/ipu_pixfmt.h @@ -76,7 +76,9 @@ #define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*< 16 YVU 4:2:2 */ #define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */ -int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt); +int ipuv3_fb_init(struct fb_videomode const *mode, + uint8_t disp, + uint32_t pixfmt); void ipuv3_fb_shutdown(void); #endif -- cgit v1.2.1 From 08fd6a3580876acc92ab8a8dceb70064f187447f Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Wed, 3 Oct 2012 07:27:39 +0000 Subject: i.MX: ipufb: add const to fb_videomode declarations Signed-off-by: Eric Nelson --- board/freescale/mx51evk/mx51evk.c | 2 +- board/freescale/mx53loco/mx53loco.c | 2 +- board/ttcontrol/vision2/vision2.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 341295204c..421d8c2244 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -471,7 +471,7 @@ int board_mmc_init(bd_t *bis) } #endif -static struct fb_videomode claa_wvga = { +static struct fb_videomode const claa_wvga = { .name = "CLAA07LC0ACW", .refresh = 57, .xres = 800, diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 20569a5a92..a11e883186 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -412,7 +412,7 @@ static void clock_1GHz(void) printf("CPU: Switch DDR clock to 400MHz failed\n"); } -static struct fb_videomode claa_wvga = { +static struct fb_videomode const claa_wvga = { .name = "CLAA07LC0ACW", .refresh = 57, .xres = 800, diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index ba3307bb02..abdd1aac2b 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -44,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR; -static struct fb_videomode nec_nl6448bc26_09c = { +static struct fb_videomode const nec_nl6448bc26_09c = { "NEC_NL6448BC26-09C", 60, /* Refresh */ 640, /* xres */ -- cgit v1.2.1 From 0fb1e57cb63ab7f71c7024d0fba8eae0bc28c909 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Wed, 3 Oct 2012 07:28:41 +0000 Subject: i.MX6: set drive strength for parallel RGB pads Default drive strength is disabled and won't function. Signed-off-by: Eric Nelson --- arch/arm/include/asm/arch-mx6/mx6x_pins.h | 58 +++++++++++++++---------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h index 3d66d64d20..3ade8dc433 100644 --- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h @@ -530,20 +530,20 @@ enum { MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0), MX6Q_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0), MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, 0), + MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0), MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, 0), + MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, 0), + MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0), @@ -551,7 +551,7 @@ enum { MX6Q_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9 = IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, 0), + MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0), @@ -564,17 +564,17 @@ enum { MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0), MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, 0), + MX6Q_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0), MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11 = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN = IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0), @@ -582,7 +582,7 @@ enum { MX6Q_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6 = IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0), @@ -590,7 +590,7 @@ enum { MX6Q_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7 = IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0), @@ -598,7 +598,7 @@ enum { MX6Q_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 = IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 = IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0), @@ -606,7 +606,7 @@ enum { MX6Q_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15 = IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0), @@ -614,7 +614,7 @@ enum { MX6Q_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10 = IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0), @@ -622,7 +622,7 @@ enum { MX6Q_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11 = IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0), @@ -630,7 +630,7 @@ enum { MX6Q_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12 = IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0), @@ -638,7 +638,7 @@ enum { MX6Q_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13 = IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0), @@ -646,41 +646,41 @@ enum { MX6Q_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14 = IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6 = IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15 = IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16 = IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED = IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17 = IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0), MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18 = IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0), MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19 = IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0), MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0), @@ -688,7 +688,7 @@ enum { MX6Q_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20 = IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0), MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0), @@ -696,7 +696,7 @@ enum { MX6Q_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21 = IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0), MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0), @@ -704,7 +704,7 @@ enum { MX6Q_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22 = IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27 = IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0), MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0), @@ -712,7 +712,7 @@ enum { MX6Q_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23 = IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0), MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0), @@ -720,7 +720,7 @@ enum { MX6Q_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24 = IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0), MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0), @@ -728,7 +728,7 @@ enum { MX6Q_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25 = IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0), MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0), @@ -736,7 +736,7 @@ enum { MX6Q_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26 = IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0), MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0), @@ -744,7 +744,7 @@ enum { MX6Q_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27 = IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, 0), + MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0), MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0), MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0), -- cgit v1.2.1 From f95c960bccffcf06c78f4336a71798821feeb3fb Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Wed, 3 Oct 2012 07:28:42 +0000 Subject: i.MX6: add HDMI transmitter register declarations from kernel WIP. Original source from Pengutronix HDMI driver work: http://git.pengutronix.de/?p=imx/linux-2.6.git;a=commitdiff;h=72c31cd67ac880bd90785af86f8e46f8ea7b3bb0 Signed-off-by: Eric Nelson --- arch/arm/include/asm/arch-mx6/mxc_hdmi.h | 1053 ++++++++++++++++++++++++++++++ 1 file changed, 1053 insertions(+) create mode 100644 arch/arm/include/asm/arch-mx6/mxc_hdmi.h diff --git a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h new file mode 100644 index 0000000000..02a413f2bc --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h @@ -0,0 +1,1053 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MXC_HDMI_H__ +#define __MXC_HDMI_H__ + +/* + * Hdmi controller registers + */ + +/* Identification Registers */ +#define HDMI_DESIGN_ID 0x0000 +#define HDMI_REVISION_ID 0x0001 +#define HDMI_PRODUCT_ID0 0x0002 +#define HDMI_PRODUCT_ID1 0x0003 +#define HDMI_CONFIG0_ID 0x0004 +#define HDMI_CONFIG1_ID 0x0005 +#define HDMI_CONFIG2_ID 0x0006 +#define HDMI_CONFIG3_ID 0x0007 + +/* Interrupt Registers */ +#define HDMI_IH_FC_STAT0 0x0100 +#define HDMI_IH_FC_STAT1 0x0101 +#define HDMI_IH_FC_STAT2 0x0102 +#define HDMI_IH_AS_STAT0 0x0103 +#define HDMI_IH_PHY_STAT0 0x0104 +#define HDMI_IH_I2CM_STAT0 0x0105 +#define HDMI_IH_CEC_STAT0 0x0106 +#define HDMI_IH_VP_STAT0 0x0107 +#define HDMI_IH_I2CMPHY_STAT0 0x0108 +#define HDMI_IH_AHBDMAAUD_STAT0 0x0109 + +#define HDMI_IH_MUTE_FC_STAT0 0x0180 +#define HDMI_IH_MUTE_FC_STAT1 0x0181 +#define HDMI_IH_MUTE_FC_STAT2 0x0182 +#define HDMI_IH_MUTE_AS_STAT0 0x0183 +#define HDMI_IH_MUTE_PHY_STAT0 0x0184 +#define HDMI_IH_MUTE_I2CM_STAT0 0x0185 +#define HDMI_IH_MUTE_CEC_STAT0 0x0186 +#define HDMI_IH_MUTE_VP_STAT0 0x0187 +#define HDMI_IH_MUTE_I2CMPHY_STAT0 0x0188 +#define HDMI_IH_MUTE_AHBDMAAUD_STAT0 0x0189 +#define HDMI_IH_MUTE 0x01FF + +/* Video Sample Registers */ +#define HDMI_TX_INVID0 0x0200 +#define HDMI_TX_INSTUFFING 0x0201 +#define HDMI_TX_GYDATA0 0x0202 +#define HDMI_TX_GYDATA1 0x0203 +#define HDMI_TX_RCRDATA0 0x0204 +#define HDMI_TX_RCRDATA1 0x0205 +#define HDMI_TX_BCBDATA0 0x0206 +#define HDMI_TX_BCBDATA1 0x0207 + +/* Video Packetizer Registers */ +#define HDMI_VP_STATUS 0x0800 +#define HDMI_VP_PR_CD 0x0801 +#define HDMI_VP_STUFF 0x0802 +#define HDMI_VP_REMAP 0x0803 +#define HDMI_VP_CONF 0x0804 +#define HDMI_VP_STAT 0x0805 +#define HDMI_VP_INT 0x0806 +#define HDMI_VP_MASK 0x0807 +#define HDMI_VP_POL 0x0808 + +/* Frame Composer Registers */ +#define HDMI_FC_INVIDCONF 0x1000 +#define HDMI_FC_INHACTV0 0x1001 +#define HDMI_FC_INHACTV1 0x1002 +#define HDMI_FC_INHBLANK0 0x1003 +#define HDMI_FC_INHBLANK1 0x1004 +#define HDMI_FC_INVACTV0 0x1005 +#define HDMI_FC_INVACTV1 0x1006 +#define HDMI_FC_INVBLANK 0x1007 +#define HDMI_FC_HSYNCINDELAY0 0x1008 +#define HDMI_FC_HSYNCINDELAY1 0x1009 +#define HDMI_FC_HSYNCINWIDTH0 0x100A +#define HDMI_FC_HSYNCINWIDTH1 0x100B +#define HDMI_FC_VSYNCINDELAY 0x100C +#define HDMI_FC_VSYNCINWIDTH 0x100D +#define HDMI_FC_INFREQ0 0x100E +#define HDMI_FC_INFREQ1 0x100F +#define HDMI_FC_INFREQ2 0x1010 +#define HDMI_FC_CTRLDUR 0x1011 +#define HDMI_FC_EXCTRLDUR 0x1012 +#define HDMI_FC_EXCTRLSPAC 0x1013 +#define HDMI_FC_CH0PREAM 0x1014 +#define HDMI_FC_CH1PREAM 0x1015 +#define HDMI_FC_CH2PREAM 0x1016 +#define HDMI_FC_AVICONF3 0x1017 +#define HDMI_FC_GCP 0x1018 +#define HDMI_FC_AVICONF0 0x1019 +#define HDMI_FC_AVICONF1 0x101A +#define HDMI_FC_AVICONF2 0x101B +#define HDMI_FC_AVIVID 0x101C +#define HDMI_FC_AVIETB0 0x101D +#define HDMI_FC_AVIETB1 0x101E +#define HDMI_FC_AVISBB0 0x101F +#define HDMI_FC_AVISBB1 0x1020 +#define HDMI_FC_AVIELB0 0x1021 +#define HDMI_FC_AVIELB1 0x1022 +#define HDMI_FC_AVISRB0 0x1023 +#define HDMI_FC_AVISRB1 0x1024 +#define HDMI_FC_AUDICONF0 0x1025 +#define HDMI_FC_AUDICONF1 0x1026 +#define HDMI_FC_AUDICONF2 0x1027 +#define HDMI_FC_AUDICONF3 0x1028 +#define HDMI_FC_VSDIEEEID0 0x1029 +#define HDMI_FC_VSDSIZE 0x102A +#define HDMI_FC_VSDIEEEID1 0x1030 +#define HDMI_FC_VSDIEEEID2 0x1031 +#define HDMI_FC_VSDPAYLOAD0 0x1032 +#define HDMI_FC_VSDPAYLOAD1 0x1033 +#define HDMI_FC_VSDPAYLOAD2 0x1034 +#define HDMI_FC_VSDPAYLOAD3 0x1035 +#define HDMI_FC_VSDPAYLOAD4 0x1036 +#define HDMI_FC_VSDPAYLOAD5 0x1037 +#define HDMI_FC_VSDPAYLOAD6 0x1038 +#define HDMI_FC_VSDPAYLOAD7 0x1039 +#define HDMI_FC_VSDPAYLOAD8 0x103A +#define HDMI_FC_VSDPAYLOAD9 0x103B +#define HDMI_FC_VSDPAYLOAD10 0x103C +#define HDMI_FC_VSDPAYLOAD11 0x103D +#define HDMI_FC_VSDPAYLOAD12 0x103E +#define HDMI_FC_VSDPAYLOAD13 0x103F +#define HDMI_FC_VSDPAYLOAD14 0x1040 +#define HDMI_FC_VSDPAYLOAD15 0x1041 +#define HDMI_FC_VSDPAYLOAD16 0x1042 +#define HDMI_FC_VSDPAYLOAD17 0x1043 +#define HDMI_FC_VSDPAYLOAD18 0x1044 +#define HDMI_FC_VSDPAYLOAD19 0x1045 +#define HDMI_FC_VSDPAYLOAD20 0x1046 +#define HDMI_FC_VSDPAYLOAD21 0x1047 +#define HDMI_FC_VSDPAYLOAD22 0x1048 +#define HDMI_FC_VSDPAYLOAD23 0x1049 +#define HDMI_FC_SPDVENDORNAME0 0x104A +#define HDMI_FC_SPDVENDORNAME1 0x104B +#define HDMI_FC_SPDVENDORNAME2 0x104C +#define HDMI_FC_SPDVENDORNAME3 0x104D +#define HDMI_FC_SPDVENDORNAME4 0x104E +#define HDMI_FC_SPDVENDORNAME5 0x104F +#define HDMI_FC_SPDVENDORNAME6 0x1050 +#define HDMI_FC_SPDVENDORNAME7 0x1051 +#define HDMI_FC_SDPPRODUCTNAME0 0x1052 +#define HDMI_FC_SDPPRODUCTNAME1 0x1053 +#define HDMI_FC_SDPPRODUCTNAME2 0x1054 +#define HDMI_FC_SDPPRODUCTNAME3 0x1055 +#define HDMI_FC_SDPPRODUCTNAME4 0x1056 +#define HDMI_FC_SDPPRODUCTNAME5 0x1057 +#define HDMI_FC_SDPPRODUCTNAME6 0x1058 +#define HDMI_FC_SDPPRODUCTNAME7 0x1059 +#define HDMI_FC_SDPPRODUCTNAME8 0x105A +#define HDMI_FC_SDPPRODUCTNAME9 0x105B +#define HDMI_FC_SDPPRODUCTNAME10 0x105C +#define HDMI_FC_SDPPRODUCTNAME11 0x105D +#define HDMI_FC_SDPPRODUCTNAME12 0x105E +#define HDMI_FC_SDPPRODUCTNAME13 0x105F +#define HDMI_FC_SDPPRODUCTNAME14 0x1060 +#define HDMI_FC_SPDPRODUCTNAME15 0x1061 +#define HDMI_FC_SPDDEVICEINF 0x1062 +#define HDMI_FC_AUDSCONF 0x1063 +#define HDMI_FC_AUDSSTAT 0x1064 +#define HDMI_FC_DATACH0FILL 0x1070 +#define HDMI_FC_DATACH1FILL 0x1071 +#define HDMI_FC_DATACH2FILL 0x1072 +#define HDMI_FC_CTRLQHIGH 0x1073 +#define HDMI_FC_CTRLQLOW 0x1074 +#define HDMI_FC_ACP0 0x1075 +#define HDMI_FC_ACP28 0x1076 +#define HDMI_FC_ACP27 0x1077 +#define HDMI_FC_ACP26 0x1078 +#define HDMI_FC_ACP25 0x1079 +#define HDMI_FC_ACP24 0x107A +#define HDMI_FC_ACP23 0x107B +#define HDMI_FC_ACP22 0x107C +#define HDMI_FC_ACP21 0x107D +#define HDMI_FC_ACP20 0x107E +#define HDMI_FC_ACP19 0x107F +#define HDMI_FC_ACP18 0x1080 +#define HDMI_FC_ACP17 0x1081 +#define HDMI_FC_ACP16 0x1082 +#define HDMI_FC_ACP15 0x1083 +#define HDMI_FC_ACP14 0x1084 +#define HDMI_FC_ACP13 0x1085 +#define HDMI_FC_ACP12 0x1086 +#define HDMI_FC_ACP11 0x1087 +#define HDMI_FC_ACP10 0x1088 +#define HDMI_FC_ACP9 0x1089 +#define HDMI_FC_ACP8 0x108A +#define HDMI_FC_ACP7 0x108B +#define HDMI_FC_ACP6 0x108C +#define HDMI_FC_ACP5 0x108D +#define HDMI_FC_ACP4 0x108E +#define HDMI_FC_ACP3 0x108F +#define HDMI_FC_ACP2 0x1090 +#define HDMI_FC_ACP1 0x1091 +#define HDMI_FC_ISCR1_0 0x1092 +#define HDMI_FC_ISCR1_16 0x1093 +#define HDMI_FC_ISCR1_15 0x1094 +#define HDMI_FC_ISCR1_14 0x1095 +#define HDMI_FC_ISCR1_13 0x1096 +#define HDMI_FC_ISCR1_12 0x1097 +#define HDMI_FC_ISCR1_11 0x1098 +#define HDMI_FC_ISCR1_10 0x1099 +#define HDMI_FC_ISCR1_9 0x109A +#define HDMI_FC_ISCR1_8 0x109B +#define HDMI_FC_ISCR1_7 0x109C +#define HDMI_FC_ISCR1_6 0x109D +#define HDMI_FC_ISCR1_5 0x109E +#define HDMI_FC_ISCR1_4 0x109F +#define HDMI_FC_ISCR1_3 0x10A0 +#define HDMI_FC_ISCR1_2 0x10A1 +#define HDMI_FC_ISCR1_1 0x10A2 +#define HDMI_FC_ISCR2_15 0x10A3 +#define HDMI_FC_ISCR2_14 0x10A4 +#define HDMI_FC_ISCR2_13 0x10A5 +#define HDMI_FC_ISCR2_12 0x10A6 +#define HDMI_FC_ISCR2_11 0x10A7 +#define HDMI_FC_ISCR2_10 0x10A8 +#define HDMI_FC_ISCR2_9 0x10A9 +#define HDMI_FC_ISCR2_8 0x10AA +#define HDMI_FC_ISCR2_7 0x10AB +#define HDMI_FC_ISCR2_6 0x10AC +#define HDMI_FC_ISCR2_5 0x10AD +#define HDMI_FC_ISCR2_4 0x10AE +#define HDMI_FC_ISCR2_3 0x10AF +#define HDMI_FC_ISCR2_2 0x10B0 +#define HDMI_FC_ISCR2_1 0x10B1 +#define HDMI_FC_ISCR2_0 0x10B2 +#define HDMI_FC_DATAUTO0 0x10B3 +#define HDMI_FC_DATAUTO1 0x10B4 +#define HDMI_FC_DATAUTO2 0x10B5 +#define HDMI_FC_DATMAN 0x10B6 +#define HDMI_FC_DATAUTO3 0x10B7 +#define HDMI_FC_RDRB0 0x10B8 +#define HDMI_FC_RDRB1 0x10B9 +#define HDMI_FC_RDRB2 0x10BA +#define HDMI_FC_RDRB3 0x10BB +#define HDMI_FC_RDRB4 0x10BC +#define HDMI_FC_RDRB5 0x10BD +#define HDMI_FC_RDRB6 0x10BE +#define HDMI_FC_RDRB7 0x10BF +#define HDMI_FC_STAT0 0x10D0 +#define HDMI_FC_INT0 0x10D1 +#define HDMI_FC_MASK0 0x10D2 +#define HDMI_FC_POL0 0x10D3 +#define HDMI_FC_STAT1 0x10D4 +#define HDMI_FC_INT1 0x10D5 +#define HDMI_FC_MASK1 0x10D6 +#define HDMI_FC_POL1 0x10D7 +#define HDMI_FC_STAT2 0x10D8 +#define HDMI_FC_INT2 0x10D9 +#define HDMI_FC_MASK2 0x10DA +#define HDMI_FC_POL2 0x10DB +#define HDMI_FC_PRCONF 0x10E0 + +#define HDMI_FC_GMD_STAT 0x1100 +#define HDMI_FC_GMD_EN 0x1101 +#define HDMI_FC_GMD_UP 0x1102 +#define HDMI_FC_GMD_CONF 0x1103 +#define HDMI_FC_GMD_HB 0x1104 +#define HDMI_FC_GMD_PB0 0x1105 +#define HDMI_FC_GMD_PB1 0x1106 +#define HDMI_FC_GMD_PB2 0x1107 +#define HDMI_FC_GMD_PB3 0x1108 +#define HDMI_FC_GMD_PB4 0x1109 +#define HDMI_FC_GMD_PB5 0x110A +#define HDMI_FC_GMD_PB6 0x110B +#define HDMI_FC_GMD_PB7 0x110C +#define HDMI_FC_GMD_PB8 0x110D +#define HDMI_FC_GMD_PB9 0x110E +#define HDMI_FC_GMD_PB10 0x110F +#define HDMI_FC_GMD_PB11 0x1110 +#define HDMI_FC_GMD_PB12 0x1111 +#define HDMI_FC_GMD_PB13 0x1112 +#define HDMI_FC_GMD_PB14 0x1113 +#define HDMI_FC_GMD_PB15 0x1114 +#define HDMI_FC_GMD_PB16 0x1115 +#define HDMI_FC_GMD_PB17 0x1116 +#define HDMI_FC_GMD_PB18 0x1117 +#define HDMI_FC_GMD_PB19 0x1118 +#define HDMI_FC_GMD_PB20 0x1119 +#define HDMI_FC_GMD_PB21 0x111A +#define HDMI_FC_GMD_PB22 0x111B +#define HDMI_FC_GMD_PB23 0x111C +#define HDMI_FC_GMD_PB24 0x111D +#define HDMI_FC_GMD_PB25 0x111E +#define HDMI_FC_GMD_PB26 0x111F +#define HDMI_FC_GMD_PB27 0x1120 + +#define HDMI_FC_DBGFORCE 0x1200 +#define HDMI_FC_DBGAUD0CH0 0x1201 +#define HDMI_FC_DBGAUD1CH0 0x1202 +#define HDMI_FC_DBGAUD2CH0 0x1203 +#define HDMI_FC_DBGAUD0CH1 0x1204 +#define HDMI_FC_DBGAUD1CH1 0x1205 +#define HDMI_FC_DBGAUD2CH1 0x1206 +#define HDMI_FC_DBGAUD0CH2 0x1207 +#define HDMI_FC_DBGAUD1CH2 0x1208 +#define HDMI_FC_DBGAUD2CH2 0x1209 +#define HDMI_FC_DBGAUD0CH3 0x120A +#define HDMI_FC_DBGAUD1CH3 0x120B +#define HDMI_FC_DBGAUD2CH3 0x120C +#define HDMI_FC_DBGAUD0CH4 0x120D +#define HDMI_FC_DBGAUD1CH4 0x120E +#define HDMI_FC_DBGAUD2CH4 0x120F +#define HDMI_FC_DBGAUD0CH5 0x1210 +#define HDMI_FC_DBGAUD1CH5 0x1211 +#define HDMI_FC_DBGAUD2CH5 0x1212 +#define HDMI_FC_DBGAUD0CH6 0x1213 +#define HDMI_FC_DBGAUD1CH6 0x1214 +#define HDMI_FC_DBGAUD2CH6 0x1215 +#define HDMI_FC_DBGAUD0CH7 0x1216 +#define HDMI_FC_DBGAUD1CH7 0x1217 +#define HDMI_FC_DBGAUD2CH7 0x1218 +#define HDMI_FC_DBGTMDS0 0x1219 +#define HDMI_FC_DBGTMDS1 0x121A +#define HDMI_FC_DBGTMDS2 0x121B + +/* HDMI Source PHY Registers */ +#define HDMI_PHY_CONF0 0x3000 +#define HDMI_PHY_TST0 0x3001 +#define HDMI_PHY_TST1 0x3002 +#define HDMI_PHY_TST2 0x3003 +#define HDMI_PHY_STAT0 0x3004 +#define HDMI_PHY_INT0 0x3005 +#define HDMI_PHY_MASK0 0x3006 +#define HDMI_PHY_POL0 0x3007 + +/* HDMI Master PHY Registers */ +#define HDMI_PHY_I2CM_SLAVE_ADDR 0x3020 +#define HDMI_PHY_I2CM_ADDRESS_ADDR 0x3021 +#define HDMI_PHY_I2CM_DATAO_1_ADDR 0x3022 +#define HDMI_PHY_I2CM_DATAO_0_ADDR 0x3023 +#define HDMI_PHY_I2CM_DATAI_1_ADDR 0x3024 +#define HDMI_PHY_I2CM_DATAI_0_ADDR 0x3025 +#define HDMI_PHY_I2CM_OPERATION_ADDR 0x3026 +#define HDMI_PHY_I2CM_INT_ADDR 0x3027 +#define HDMI_PHY_I2CM_CTLINT_ADDR 0x3028 +#define HDMI_PHY_I2CM_DIV_ADDR 0x3029 +#define HDMI_PHY_I2CM_SOFTRSTZ_ADDR 0x302a +#define HDMI_PHY_I2CM_SS_SCL_HCNT_1_ADDR 0x302b +#define HDMI_PHY_I2CM_SS_SCL_HCNT_0_ADDR 0x302c +#define HDMI_PHY_I2CM_SS_SCL_LCNT_1_ADDR 0x302d +#define HDMI_PHY_I2CM_SS_SCL_LCNT_0_ADDR 0x302e +#define HDMI_PHY_I2CM_FS_SCL_HCNT_1_ADDR 0x302f +#define HDMI_PHY_I2CM_FS_SCL_HCNT_0_ADDR 0x3030 +#define HDMI_PHY_I2CM_FS_SCL_LCNT_1_ADDR 0x3031 +#define HDMI_PHY_I2CM_FS_SCL_LCNT_0_ADDR 0x3032 + +/* Audio Sampler Registers */ +#define HDMI_AUD_CONF0 0x3100 +#define HDMI_AUD_CONF1 0x3101 +#define HDMI_AUD_INT 0x3102 +#define HDMI_AUD_CONF2 0x3103 +#define HDMI_AUD_N1 0x3200 +#define HDMI_AUD_N2 0x3201 +#define HDMI_AUD_N3 0x3202 +#define HDMI_AUD_CTS1 0x3203 +#define HDMI_AUD_CTS2 0x3204 +#define HDMI_AUD_CTS3 0x3205 +#define HDMI_AUD_INPUTCLKFS 0x3206 +#define HDMI_AUD_SPDIFINT 0x3302 +#define HDMI_AUD_CONF0_HBR 0x3400 +#define HDMI_AUD_HBR_STATUS 0x3401 +#define HDMI_AUD_HBR_INT 0x3402 +#define HDMI_AUD_HBR_POL 0x3403 +#define HDMI_AUD_HBR_MASK 0x3404 + +/* Generic Parallel Audio Interface Registers */ +/* Not used as GPAUD interface is not enabled in hw */ +#define HDMI_GP_CONF0 0x3500 +#define HDMI_GP_CONF1 0x3501 +#define HDMI_GP_CONF2 0x3502 +#define HDMI_GP_STAT 0x3503 +#define HDMI_GP_INT 0x3504 +#define HDMI_GP_MASK 0x3505 +#define HDMI_GP_POL 0x3506 + +/* Audio DMA Registers */ +#define HDMI_AHB_DMA_CONF0 0x3600 +#define HDMI_AHB_DMA_START 0x3601 +#define HDMI_AHB_DMA_STOP 0x3602 +#define HDMI_AHB_DMA_THRSLD 0x3603 +#define HDMI_AHB_DMA_STRADDR0 0x3604 +#define HDMI_AHB_DMA_STRADDR1 0x3605 +#define HDMI_AHB_DMA_STRADDR2 0x3606 +#define HDMI_AHB_DMA_STRADDR3 0x3607 +#define HDMI_AHB_DMA_STPADDR0 0x3608 +#define HDMI_AHB_DMA_STPADDR1 0x3609 +#define HDMI_AHB_DMA_STPADDR2 0x360a +#define HDMI_AHB_DMA_STPADDR3 0x360b +#define HDMI_AHB_DMA_BSTADDR0 0x360c +#define HDMI_AHB_DMA_BSTADDR1 0x360d +#define HDMI_AHB_DMA_BSTADDR2 0x360e +#define HDMI_AHB_DMA_BSTADDR3 0x360f +#define HDMI_AHB_DMA_MBLENGTH0 0x3610 +#define HDMI_AHB_DMA_MBLENGTH1 0x3611 +#define HDMI_AHB_DMA_STAT 0x3612 +#define HDMI_AHB_DMA_INT 0x3613 +#define HDMI_AHB_DMA_MASK 0x3614 +#define HDMI_AHB_DMA_POL 0x3615 +#define HDMI_AHB_DMA_CONF1 0x3616 +#define HDMI_AHB_DMA_BUFFSTAT 0x3617 +#define HDMI_AHB_DMA_BUFFINT 0x3618 +#define HDMI_AHB_DMA_BUFFMASK 0x3619 +#define HDMI_AHB_DMA_BUFFPOL 0x361a + +/* Main Controller Registers */ +#define HDMI_MC_SFRDIV 0x4000 +#define HDMI_MC_CLKDIS 0x4001 +#define HDMI_MC_SWRSTZ 0x4002 +#define HDMI_MC_OPCTRL 0x4003 +#define HDMI_MC_FLOWCTRL 0x4004 +#define HDMI_MC_PHYRSTZ 0x4005 +#define HDMI_MC_LOCKONCLOCK 0x4006 +#define HDMI_MC_HEACPHY_RST 0x4007 + +/* Color Space Converter Registers */ +#define HDMI_CSC_CFG 0x4100 +#define HDMI_CSC_SCALE 0x4101 +#define HDMI_CSC_COEF_A1_MSB 0x4102 +#define HDMI_CSC_COEF_A1_LSB 0x4103 +#define HDMI_CSC_COEF_A2_MSB 0x4104 +#define HDMI_CSC_COEF_A2_LSB 0x4105 +#define HDMI_CSC_COEF_A3_MSB 0x4106 +#define HDMI_CSC_COEF_A3_LSB 0x4107 +#define HDMI_CSC_COEF_A4_MSB 0x4108 +#define HDMI_CSC_COEF_A4_LSB 0x4109 +#define HDMI_CSC_COEF_B1_MSB 0x410A +#define HDMI_CSC_COEF_B1_LSB 0x410B +#define HDMI_CSC_COEF_B2_MSB 0x410C +#define HDMI_CSC_COEF_B2_LSB 0x410D +#define HDMI_CSC_COEF_B3_MSB 0x410E +#define HDMI_CSC_COEF_B3_LSB 0x410F +#define HDMI_CSC_COEF_B4_MSB 0x4110 +#define HDMI_CSC_COEF_B4_LSB 0x4111 +#define HDMI_CSC_COEF_C1_MSB 0x4112 +#define HDMI_CSC_COEF_C1_LSB 0x4113 +#define HDMI_CSC_COEF_C2_MSB 0x4114 +#define HDMI_CSC_COEF_C2_LSB 0x4115 +#define HDMI_CSC_COEF_C3_MSB 0x4116 +#define HDMI_CSC_COEF_C3_LSB 0x4117 +#define HDMI_CSC_COEF_C4_MSB 0x4118 +#define HDMI_CSC_COEF_C4_LSB 0x4119 + +/* HDCP Encryption Engine Registers */ +#define HDMI_A_HDCPCFG0 0x5000 +#define HDMI_A_HDCPCFG1 0x5001 +#define HDMI_A_HDCPOBS0 0x5002 +#define HDMI_A_HDCPOBS1 0x5003 +#define HDMI_A_HDCPOBS2 0x5004 +#define HDMI_A_HDCPOBS3 0x5005 +#define HDMI_A_APIINTCLR 0x5006 +#define HDMI_A_APIINTSTAT 0x5007 +#define HDMI_A_APIINTMSK 0x5008 +#define HDMI_A_VIDPOLCFG 0x5009 +#define HDMI_A_OESSWCFG 0x500A +#define HDMI_A_TIMER1SETUP0 0x500B +#define HDMI_A_TIMER1SETUP1 0x500C +#define HDMI_A_TIMER2SETUP0 0x500D +#define HDMI_A_TIMER2SETUP1 0x500E +#define HDMI_A_100MSCFG 0x500F +#define HDMI_A_2SCFG0 0x5010 +#define HDMI_A_2SCFG1 0x5011 +#define HDMI_A_5SCFG0 0x5012 +#define HDMI_A_5SCFG1 0x5013 +#define HDMI_A_SRMVERLSB 0x5014 +#define HDMI_A_SRMVERMSB 0x5015 +#define HDMI_A_SRMCTRL 0x5016 +#define HDMI_A_SFRSETUP 0x5017 +#define HDMI_A_I2CHSETUP 0x5018 +#define HDMI_A_INTSETUP 0x5019 +#define HDMI_A_PRESETUP 0x501A +#define HDMI_A_SRM_BASE 0x5020 + +/* CEC Engine Registers */ +#define HDMI_CEC_CTRL 0x7D00 +#define HDMI_CEC_STAT 0x7D01 +#define HDMI_CEC_MASK 0x7D02 +#define HDMI_CEC_POLARITY 0x7D03 +#define HDMI_CEC_INT 0x7D04 +#define HDMI_CEC_ADDR_L 0x7D05 +#define HDMI_CEC_ADDR_H 0x7D06 +#define HDMI_CEC_TX_CNT 0x7D07 +#define HDMI_CEC_RX_CNT 0x7D08 +#define HDMI_CEC_TX_DATA0 0x7D10 +#define HDMI_CEC_TX_DATA1 0x7D11 +#define HDMI_CEC_TX_DATA2 0x7D12 +#define HDMI_CEC_TX_DATA3 0x7D13 +#define HDMI_CEC_TX_DATA4 0x7D14 +#define HDMI_CEC_TX_DATA5 0x7D15 +#define HDMI_CEC_TX_DATA6 0x7D16 +#define HDMI_CEC_TX_DATA7 0x7D17 +#define HDMI_CEC_TX_DATA8 0x7D18 +#define HDMI_CEC_TX_DATA9 0x7D19 +#define HDMI_CEC_TX_DATA10 0x7D1a +#define HDMI_CEC_TX_DATA11 0x7D1b +#define HDMI_CEC_TX_DATA12 0x7D1c +#define HDMI_CEC_TX_DATA13 0x7D1d +#define HDMI_CEC_TX_DATA14 0x7D1e +#define HDMI_CEC_TX_DATA15 0x7D1f +#define HDMI_CEC_RX_DATA0 0x7D20 +#define HDMI_CEC_RX_DATA1 0x7D21 +#define HDMI_CEC_RX_DATA2 0x7D22 +#define HDMI_CEC_RX_DATA3 0x7D23 +#define HDMI_CEC_RX_DATA4 0x7D24 +#define HDMI_CEC_RX_DATA5 0x7D25 +#define HDMI_CEC_RX_DATA6 0x7D26 +#define HDMI_CEC_RX_DATA7 0x7D27 +#define HDMI_CEC_RX_DATA8 0x7D28 +#define HDMI_CEC_RX_DATA9 0x7D29 +#define HDMI_CEC_RX_DATA10 0x7D2a +#define HDMI_CEC_RX_DATA11 0x7D2b +#define HDMI_CEC_RX_DATA12 0x7D2c +#define HDMI_CEC_RX_DATA13 0x7D2d +#define HDMI_CEC_RX_DATA14 0x7D2e +#define HDMI_CEC_RX_DATA15 0x7D2f +#define HDMI_CEC_LOCK 0x7D30 +#define HDMI_CEC_WKUPCTRL 0x7D31 + +/* I2C Master Registers (E-DDC) */ +#define HDMI_I2CM_SLAVE 0x7E00 +#define HDMI_I2CMESS 0x7E01 +#define HDMI_I2CM_DATAO 0x7E02 +#define HDMI_I2CM_DATAI 0x7E03 +#define HDMI_I2CM_OPERATION 0x7E04 +#define HDMI_I2CM_INT 0x7E05 +#define HDMI_I2CM_CTLINT 0x7E06 +#define HDMI_I2CM_DIV 0x7E07 +#define HDMI_I2CM_SEGADDR 0x7E08 +#define HDMI_I2CM_SOFTRSTZ 0x7E09 +#define HDMI_I2CM_SEGPTR 0x7E0A +#define HDMI_I2CM_SS_SCL_HCNT_1_ADDR 0x7E0B +#define HDMI_I2CM_SS_SCL_HCNT_0_ADDR 0x7E0C +#define HDMI_I2CM_SS_SCL_LCNT_1_ADDR 0x7E0D +#define HDMI_I2CM_SS_SCL_LCNT_0_ADDR 0x7E0E +#define HDMI_I2CM_FS_SCL_HCNT_1_ADDR 0x7E0F +#define HDMI_I2CM_FS_SCL_HCNT_0_ADDR 0x7E10 +#define HDMI_I2CM_FS_SCL_LCNT_1_ADDR 0x7E11 +#define HDMI_I2CM_FS_SCL_LCNT_0_ADDR 0x7E12 + +/* Random Number Generator Registers (RNG) */ +#define HDMI_RNG_BASE 0x8000 + + +/* + * Register field definitions + */ +enum { +/* IH_FC_INT2 field values */ + HDMI_IH_FC_INT2_OVERFLOW_MASK = 0x03, + HDMI_IH_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_IH_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* IH_FC_STAT2 field values */ + HDMI_IH_FC_STAT2_OVERFLOW_MASK = 0x03, + HDMI_IH_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_IH_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* IH_PHY_STAT0 field values */ + HDMI_IH_PHY_STAT0_RX_SENSE3 = 0x20, + HDMI_IH_PHY_STAT0_RX_SENSE2 = 0x10, + HDMI_IH_PHY_STAT0_RX_SENSE1 = 0x8, + HDMI_IH_PHY_STAT0_RX_SENSE0 = 0x4, + HDMI_IH_PHY_STAT0_TX_PHY_LOCK = 0x2, + HDMI_IH_PHY_STAT0_HPD = 0x1, + +/* IH_MUTE_I2CMPHY_STAT0 field values */ + HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYDONE = 0x2, + HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYERROR = 0x1, + +/* IH_AHBDMAAUD_STAT0 field values */ + HDMI_IH_AHBDMAAUD_STAT0_ERROR = 0x20, + HDMI_IH_AHBDMAAUD_STAT0_LOST = 0x10, + HDMI_IH_AHBDMAAUD_STAT0_RETRY = 0x08, + HDMI_IH_AHBDMAAUD_STAT0_DONE = 0x04, + HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL = 0x02, + HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01, + +/* IH_MUTE_FC_STAT2 field values */ + HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK = 0x03, + HDMI_IH_MUTE_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_IH_MUTE_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* IH_MUTE_AHBDMAAUD_STAT0 field values */ + HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR = 0x20, + HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST = 0x10, + HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY = 0x08, + HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE = 0x04, + HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL = 0x02, + HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01, + +/* IH_MUTE field values */ + HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT = 0x2, + HDMI_IH_MUTE_MUTE_ALL_INTERRUPT = 0x1, + +/* TX_INVID0 field values */ + HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_MASK = 0x80, + HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_ENABLE = 0x80, + HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE = 0x00, + HDMI_TX_INVID0_VIDEO_MAPPING_MASK = 0x1F, + HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET = 0, + +/* TX_INSTUFFING field values */ + HDMI_TX_INSTUFFING_BDBDATA_STUFFING_MASK = 0x4, + HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE = 0x4, + HDMI_TX_INSTUFFING_BDBDATA_STUFFING_DISABLE = 0x0, + HDMI_TX_INSTUFFING_RCRDATA_STUFFING_MASK = 0x2, + HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE = 0x2, + HDMI_TX_INSTUFFING_RCRDATA_STUFFING_DISABLE = 0x0, + HDMI_TX_INSTUFFING_GYDATA_STUFFING_MASK = 0x1, + HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE = 0x1, + HDMI_TX_INSTUFFING_GYDATA_STUFFING_DISABLE = 0x0, + +/* VP_PR_CD field values */ + HDMI_VP_PR_CD_COLOR_DEPTH_MASK = 0xF0, + HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET = 4, + HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK = 0x0F, + HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET = 0, + +/* VP_STUFF field values */ + HDMI_VP_STUFF_IDEFAULT_PHASE_MASK = 0x20, + HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET = 5, + HDMI_VP_STUFF_IFIX_PP_TO_LAST_MASK = 0x10, + HDMI_VP_STUFF_IFIX_PP_TO_LAST_OFFSET = 4, + HDMI_VP_STUFF_ICX_GOTO_P0_ST_MASK = 0x8, + HDMI_VP_STUFF_ICX_GOTO_P0_ST_OFFSET = 3, + HDMI_VP_STUFF_YCC422_STUFFING_MASK = 0x4, + HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE = 0x4, + HDMI_VP_STUFF_YCC422_STUFFING_DIRECT_MODE = 0x0, + HDMI_VP_STUFF_PP_STUFFING_MASK = 0x2, + HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE = 0x2, + HDMI_VP_STUFF_PP_STUFFING_DIRECT_MODE = 0x0, + HDMI_VP_STUFF_PR_STUFFING_MASK = 0x1, + HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE = 0x1, + HDMI_VP_STUFF_PR_STUFFING_DIRECT_MODE = 0x0, + +/* VP_CONF field values */ + HDMI_VP_CONF_BYPASS_EN_MASK = 0x40, + HDMI_VP_CONF_BYPASS_EN_ENABLE = 0x40, + HDMI_VP_CONF_BYPASS_EN_DISABLE = 0x00, + HDMI_VP_CONF_PP_EN_ENMASK = 0x20, + HDMI_VP_CONF_PP_EN_ENABLE = 0x20, + HDMI_VP_CONF_PP_EN_DISABLE = 0x00, + HDMI_VP_CONF_PR_EN_MASK = 0x10, + HDMI_VP_CONF_PR_EN_ENABLE = 0x10, + HDMI_VP_CONF_PR_EN_DISABLE = 0x00, + HDMI_VP_CONF_YCC422_EN_MASK = 0x8, + HDMI_VP_CONF_YCC422_EN_ENABLE = 0x8, + HDMI_VP_CONF_YCC422_EN_DISABLE = 0x0, + HDMI_VP_CONF_BYPASS_SELECT_MASK = 0x4, + HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER = 0x4, + HDMI_VP_CONF_BYPASS_SELECT_PIX_REPEATER = 0x0, + HDMI_VP_CONF_OUTPUT_SELECTOR_MASK = 0x3, + HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS = 0x3, + HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422 = 0x1, + HDMI_VP_CONF_OUTPUT_SELECTOR_PP = 0x0, + +/* VP_REMAP field values */ + HDMI_VP_REMAP_MASK = 0x3, + HDMI_VP_REMAP_YCC422_24bit = 0x2, + HDMI_VP_REMAP_YCC422_20bit = 0x1, + HDMI_VP_REMAP_YCC422_16bit = 0x0, + +/* FC_INVIDCONF field values */ + HDMI_FC_INVIDCONF_HDCP_KEEPOUT_MASK = 0x80, + HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE = 0x80, + HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE = 0x00, + HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_MASK = 0x40, + HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH = 0x40, + HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW = 0x00, + HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_MASK = 0x20, + HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH = 0x20, + HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW = 0x00, + HDMI_FC_INVIDCONF_DE_IN_POLARITY_MASK = 0x10, + HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH = 0x10, + HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW = 0x00, + HDMI_FC_INVIDCONF_DVI_MODEZ_MASK = 0x8, + HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE = 0x8, + HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE = 0x0, + HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_MASK = 0x2, + HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH = 0x2, + HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW = 0x0, + HDMI_FC_INVIDCONF_IN_I_P_MASK = 0x1, + HDMI_FC_INVIDCONF_IN_I_P_INTERLACED = 0x1, + HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE = 0x0, + +/* FC_AUDICONF0 field values */ + HDMI_FC_AUDICONF0_CC_OFFSET = 4, + HDMI_FC_AUDICONF0_CC_MASK = 0x70, + HDMI_FC_AUDICONF0_CT_OFFSET = 0, + HDMI_FC_AUDICONF0_CT_MASK = 0xF, + +/* FC_AUDICONF1 field values */ + HDMI_FC_AUDICONF1_SS_OFFSET = 3, + HDMI_FC_AUDICONF1_SS_MASK = 0x18, + HDMI_FC_AUDICONF1_SF_OFFSET = 0, + HDMI_FC_AUDICONF1_SF_MASK = 0x7, + +/* FC_AUDICONF3 field values */ + HDMI_FC_AUDICONF3_LFEPBL_OFFSET = 5, + HDMI_FC_AUDICONF3_LFEPBL_MASK = 0x60, + HDMI_FC_AUDICONF3_DM_INH_OFFSET = 4, + HDMI_FC_AUDICONF3_DM_INH_MASK = 0x10, + HDMI_FC_AUDICONF3_LSV_OFFSET = 0, + HDMI_FC_AUDICONF3_LSV_MASK = 0xF, + +/* FC_AUDSCHNLS0 field values */ + HDMI_FC_AUDSCHNLS0_CGMSA_OFFSET = 4, + HDMI_FC_AUDSCHNLS0_CGMSA_MASK = 0x30, + HDMI_FC_AUDSCHNLS0_COPYRIGHT_OFFSET = 0, + HDMI_FC_AUDSCHNLS0_COPYRIGHT_MASK = 0x01, + +/* FC_AUDSCHNLS3-6 field values */ + HDMI_FC_AUDSCHNLS3_OIEC_CH0_OFFSET = 0, + HDMI_FC_AUDSCHNLS3_OIEC_CH0_MASK = 0x0f, + HDMI_FC_AUDSCHNLS3_OIEC_CH1_OFFSET = 4, + HDMI_FC_AUDSCHNLS3_OIEC_CH1_MASK = 0xf0, + HDMI_FC_AUDSCHNLS4_OIEC_CH2_OFFSET = 0, + HDMI_FC_AUDSCHNLS4_OIEC_CH2_MASK = 0x0f, + HDMI_FC_AUDSCHNLS4_OIEC_CH3_OFFSET = 4, + HDMI_FC_AUDSCHNLS4_OIEC_CH3_MASK = 0xf0, + + HDMI_FC_AUDSCHNLS5_OIEC_CH0_OFFSET = 0, + HDMI_FC_AUDSCHNLS5_OIEC_CH0_MASK = 0x0f, + HDMI_FC_AUDSCHNLS5_OIEC_CH1_OFFSET = 4, + HDMI_FC_AUDSCHNLS5_OIEC_CH1_MASK = 0xf0, + HDMI_FC_AUDSCHNLS6_OIEC_CH2_OFFSET = 0, + HDMI_FC_AUDSCHNLS6_OIEC_CH2_MASK = 0x0f, + HDMI_FC_AUDSCHNLS6_OIEC_CH3_OFFSET = 4, + HDMI_FC_AUDSCHNLS6_OIEC_CH3_MASK = 0xf0, + +/* HDMI_FC_AUDSCHNLS7 field values */ + HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4, + HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30, + +/* HDMI_FC_AUDSCHNLS8 field values */ + HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0, + HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET = 4, + HDMI_FC_AUDSCHNLS8_WORDLEGNTH_MASK = 0x0f, + HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET = 0, + +/* FC_AUDSCONF field values */ + HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_MASK = 0xF0, + HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_OFFSET = 4, + HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_MASK = 0x1, + HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_OFFSET = 0, + HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT1 = 0x1, + HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT0 = 0x0, + +/* FC_STAT2 field values */ + HDMI_FC_STAT2_OVERFLOW_MASK = 0x03, + HDMI_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* FC_INT2 field values */ + HDMI_FC_INT2_OVERFLOW_MASK = 0x03, + HDMI_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* FC_MASK2 field values */ + HDMI_FC_MASK2_OVERFLOW_MASK = 0x03, + HDMI_FC_MASK2_LOW_PRIORITY_OVERFLOW = 0x02, + HDMI_FC_MASK2_HIGH_PRIORITY_OVERFLOW = 0x01, + +/* FC_PRCONF field values */ + HDMI_FC_PRCONF_INCOMING_PR_FACTOR_MASK = 0xF0, + HDMI_FC_PRCONF_INCOMING_PR_FACTOR_OFFSET = 4, + HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_MASK = 0x0F, + HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_OFFSET = 0, + +/* FC_AVICONF0-FC_AVICONF3 field values */ + HDMI_FC_AVICONF0_PIX_FMT_MASK = 0x03, + HDMI_FC_AVICONF0_PIX_FMT_RGB = 0x00, + HDMI_FC_AVICONF0_PIX_FMT_YCBCR422 = 0x01, + HDMI_FC_AVICONF0_PIX_FMT_YCBCR444 = 0x02, + HDMI_FC_AVICONF0_ACTIVE_FMT_MASK = 0x40, + HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT = 0x40, + HDMI_FC_AVICONF0_ACTIVE_FMT_NO_INFO = 0x00, + HDMI_FC_AVICONF0_BAR_DATA_MASK = 0x0C, + HDMI_FC_AVICONF0_BAR_DATA_NO_DATA = 0x00, + HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR = 0x04, + HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR = 0x08, + HDMI_FC_AVICONF0_BAR_DATA_VERT_HORIZ_BAR = 0x0C, + HDMI_FC_AVICONF0_SCAN_INFO_MASK = 0x30, + HDMI_FC_AVICONF0_SCAN_INFO_OVERSCAN = 0x10, + HDMI_FC_AVICONF0_SCAN_INFO_UNDERSCAN = 0x20, + HDMI_FC_AVICONF0_SCAN_INFO_NODATA = 0x00, + + HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_MASK = 0x0F, + HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_USE_CODED = 0x08, + HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_4_3 = 0x09, + HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_16_9 = 0x0A, + HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_14_9 = 0x0B, + HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_MASK = 0x30, + HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_NO_DATA = 0x00, + HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_4_3 = 0x10, + HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_16_9 = 0x20, + HDMI_FC_AVICONF1_COLORIMETRY_MASK = 0xC0, + HDMI_FC_AVICONF1_COLORIMETRY_NO_DATA = 0x00, + HDMI_FC_AVICONF1_COLORIMETRY_SMPTE = 0x40, + HDMI_FC_AVICONF1_COLORIMETRY_ITUR = 0x80, + HDMI_FC_AVICONF1_COLORIMETRY_EXTENDED_INFO = 0xC0, + + HDMI_FC_AVICONF2_SCALING_MASK = 0x03, + HDMI_FC_AVICONF2_SCALING_NONE = 0x00, + HDMI_FC_AVICONF2_SCALING_HORIZ = 0x01, + HDMI_FC_AVICONF2_SCALING_VERT = 0x02, + HDMI_FC_AVICONF2_SCALING_HORIZ_VERT = 0x03, + HDMI_FC_AVICONF2_RGB_QUANT_MASK = 0x0C, + HDMI_FC_AVICONF2_RGB_QUANT_DEFAULT = 0x00, + HDMI_FC_AVICONF2_RGB_QUANT_LIMITED_RANGE = 0x04, + HDMI_FC_AVICONF2_RGB_QUANT_FULL_RANGE = 0x08, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_MASK = 0x70, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601 = 0x00, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC709 = 0x10, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_SYCC601 = 0x20, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_YCC601 = 0x30, + HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_RGB = 0x40, + HDMI_FC_AVICONF2_IT_CONTENT_MASK = 0x80, + HDMI_FC_AVICONF2_IT_CONTENT_NO_DATA = 0x00, + HDMI_FC_AVICONF2_IT_CONTENT_VALID = 0x80, + + HDMI_FC_AVICONF3_IT_CONTENT_TYPE_MASK = 0x03, + HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GRAPHICS = 0x00, + HDMI_FC_AVICONF3_IT_CONTENT_TYPE_PHOTO = 0x01, + HDMI_FC_AVICONF3_IT_CONTENT_TYPE_CINEMA = 0x02, + HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GAME = 0x03, + HDMI_FC_AVICONF3_QUANT_RANGE_MASK = 0x0C, + HDMI_FC_AVICONF3_QUANT_RANGE_LIMITED = 0x00, + HDMI_FC_AVICONF3_QUANT_RANGE_FULL = 0x04, + +/* FC_DBGFORCE field values */ + HDMI_FC_DBGFORCE_FORCEAUDIO = 0x10, + HDMI_FC_DBGFORCE_FORCEVIDEO = 0x1, + +/* PHY_CONF0 field values */ + HDMI_PHY_CONF0_PDZ_MASK = 0x80, + HDMI_PHY_CONF0_PDZ_OFFSET = 7, + HDMI_PHY_CONF0_ENTMDS_MASK = 0x40, + HDMI_PHY_CONF0_ENTMDS_OFFSET = 6, + HDMI_PHY_CONF0_SPARECTRL = 0x20, + HDMI_PHY_CONF0_GEN2_PDDQ_MASK = 0x10, + HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET = 4, + HDMI_PHY_CONF0_GEN2_TXPWRON_MASK = 0x8, + HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET = 3, + HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_MASK = 0x4, + HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_OFFSET = 2, + HDMI_PHY_CONF0_SELDATAENPOL_MASK = 0x2, + HDMI_PHY_CONF0_SELDATAENPOL_OFFSET = 1, + HDMI_PHY_CONF0_SELDIPIF_MASK = 0x1, + HDMI_PHY_CONF0_SELDIPIF_OFFSET = 0, + +/* PHY_TST0 field values */ + HDMI_PHY_TST0_TSTCLR_MASK = 0x20, + HDMI_PHY_TST0_TSTCLR_OFFSET = 5, + HDMI_PHY_TST0_TSTEN_MASK = 0x10, + HDMI_PHY_TST0_TSTEN_OFFSET = 4, + HDMI_PHY_TST0_TSTCLK_MASK = 0x1, + HDMI_PHY_TST0_TSTCLK_OFFSET = 0, + +/* PHY_STAT0 field values */ + HDMI_PHY_RX_SENSE3 = 0x80, + HDMI_PHY_RX_SENSE2 = 0x40, + HDMI_PHY_RX_SENSE1 = 0x20, + HDMI_PHY_RX_SENSE0 = 0x10, + HDMI_PHY_HPD = 0x02, + HDMI_PHY_TX_PHY_LOCK = 0x01, + +/* PHY_I2CM_SLAVE_ADDR field values */ + HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2 = 0x69, + HDMI_PHY_I2CM_SLAVE_ADDR_HEAC_PHY = 0x49, + +/* PHY_I2CM_OPERATION_ADDR field values */ + HDMI_PHY_I2CM_OPERATION_ADDR_WRITE = 0x10, + HDMI_PHY_I2CM_OPERATION_ADDR_READ = 0x1, + +/* HDMI_PHY_I2CM_INT_ADDR */ + HDMI_PHY_I2CM_INT_ADDR_DONE_POL = 0x08, + HDMI_PHY_I2CM_INT_ADDR_DONE_MASK = 0x04, + +/* HDMI_PHY_I2CM_CTLINT_ADDR */ + HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL = 0x80, + HDMI_PHY_I2CM_CTLINT_ADDR_NAC_MASK = 0x40, + HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL = 0x08, + HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_MASK = 0x04, + +/* AUD_CTS3 field values */ + HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5, + HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0, + HDMI_AUD_CTS3_N_SHIFT_1 = 0, + HDMI_AUD_CTS3_N_SHIFT_16 = 0x20, + HDMI_AUD_CTS3_N_SHIFT_32 = 0x40, + HDMI_AUD_CTS3_N_SHIFT_64 = 0x60, + HDMI_AUD_CTS3_N_SHIFT_128 = 0x80, + HDMI_AUD_CTS3_N_SHIFT_256 = 0xa0, + /* note that the CTS3 MANUAL bit has been removed + from our part. Can't set it, will read as 0. */ + HDMI_AUD_CTS3_CTS_MANUAL = 0x10, + HDMI_AUD_CTS3_AUDCTS19_16_MASK = 0x0f, + +/* AHB_DMA_CONF0 field values */ + HDMI_AHB_DMA_CONF0_SW_FIFO_RST_OFFSET = 7, + HDMI_AHB_DMA_CONF0_SW_FIFO_RST_MASK = 0x80, + HDMI_AHB_DMA_CONF0_HBR = 0x10, + HDMI_AHB_DMA_CONF0_EN_HLOCK_OFFSET = 3, + HDMI_AHB_DMA_CONF0_EN_HLOCK_MASK = 0x08, + HDMI_AHB_DMA_CONF0_INCR_TYPE_OFFSET = 1, + HDMI_AHB_DMA_CONF0_INCR_TYPE_MASK = 0x06, + HDMI_AHB_DMA_CONF0_INCR4 = 0x0, + HDMI_AHB_DMA_CONF0_INCR8 = 0x2, + HDMI_AHB_DMA_CONF0_INCR16 = 0x4, + HDMI_AHB_DMA_CONF0_BURST_MODE = 0x1, + +/* HDMI_AHB_DMA_START field values */ + HDMI_AHB_DMA_START_START_OFFSET = 0, + HDMI_AHB_DMA_START_START_MASK = 0x01, + +/* HDMI_AHB_DMA_STOP field values */ + HDMI_AHB_DMA_STOP_STOP_OFFSET = 0, + HDMI_AHB_DMA_STOP_STOP_MASK = 0x01, + +/* AHB_DMA_STAT, AHB_DMA_INT, AHB_DMA_MASK, AHB_DMA_POL field values */ + HDMI_AHB_DMA_DONE = 0x80, + HDMI_AHB_DMA_RETRY_SPLIT = 0x40, + HDMI_AHB_DMA_LOSTOWNERSHIP = 0x20, + HDMI_AHB_DMA_ERROR = 0x10, + HDMI_AHB_DMA_FIFO_THREMPTY = 0x04, + HDMI_AHB_DMA_FIFO_FULL = 0x02, + HDMI_AHB_DMA_FIFO_EMPTY = 0x01, + +/* AHB_DMA_BUFFSTAT, AHB_DMA_BUFFINT, AHB_DMA_BUFFMASK, AHB_DMA_BUFFPOL field values */ + HDMI_AHB_DMA_BUFFSTAT_FULL = 0x02, + HDMI_AHB_DMA_BUFFSTAT_EMPTY = 0x01, + +/* MC_CLKDIS field values */ + HDMI_MC_CLKDIS_HDCPCLK_DISABLE = 0x40, + HDMI_MC_CLKDIS_CECCLK_DISABLE = 0x20, + HDMI_MC_CLKDIS_CSCCLK_DISABLE = 0x10, + HDMI_MC_CLKDIS_AUDCLK_DISABLE = 0x8, + HDMI_MC_CLKDIS_PREPCLK_DISABLE = 0x4, + HDMI_MC_CLKDIS_TMDSCLK_DISABLE = 0x2, + HDMI_MC_CLKDIS_PIXELCLK_DISABLE = 0x1, + +/* MC_SWRSTZ field values */ + HDMI_MC_SWRSTZ_TMDSSWRST_REQ = 0x02, + +/* MC_FLOWCTRL field values */ + HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_MASK = 0x1, + HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH = 0x1, + HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS = 0x0, + +/* MC_PHYRSTZ field values */ + HDMI_MC_PHYRSTZ_ASSERT = 0x0, + HDMI_MC_PHYRSTZ_DEASSERT = 0x1, + +/* MC_HEACPHY_RST field values */ + HDMI_MC_HEACPHY_RST_ASSERT = 0x1, + HDMI_MC_HEACPHY_RST_DEASSERT = 0x0, + +/* CSC_CFG field values */ + HDMI_CSC_CFG_INTMODE_MASK = 0x30, + HDMI_CSC_CFG_INTMODE_OFFSET = 4, + HDMI_CSC_CFG_INTMODE_DISABLE = 0x00, + HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA1 = 0x10, + HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA2 = 0x20, + HDMI_CSC_CFG_DECMODE_MASK = 0x3, + HDMI_CSC_CFG_DECMODE_OFFSET = 0, + HDMI_CSC_CFG_DECMODE_DISABLE = 0x0, + HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA1 = 0x1, + HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA2 = 0x2, + HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA3 = 0x3, + +/* CSC_SCALE field values */ + HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK = 0xF0, + HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP = 0x00, + HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP = 0x50, + HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP = 0x60, + HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP = 0x70, + HDMI_CSC_SCALE_CSCSCALE_MASK = 0x03, + +/* A_HDCPCFG0 field values */ + HDMI_A_HDCPCFG0_ELVENA_MASK = 0x80, + HDMI_A_HDCPCFG0_ELVENA_ENABLE = 0x80, + HDMI_A_HDCPCFG0_ELVENA_DISABLE = 0x00, + HDMI_A_HDCPCFG0_I2CFASTMODE_MASK = 0x40, + HDMI_A_HDCPCFG0_I2CFASTMODE_ENABLE = 0x40, + HDMI_A_HDCPCFG0_I2CFASTMODE_DISABLE = 0x00, + HDMI_A_HDCPCFG0_BYPENCRYPTION_MASK = 0x20, + HDMI_A_HDCPCFG0_BYPENCRYPTION_ENABLE = 0x20, + HDMI_A_HDCPCFG0_BYPENCRYPTION_DISABLE = 0x00, + HDMI_A_HDCPCFG0_SYNCRICHECK_MASK = 0x10, + HDMI_A_HDCPCFG0_SYNCRICHECK_ENABLE = 0x10, + HDMI_A_HDCPCFG0_SYNCRICHECK_DISABLE = 0x00, + HDMI_A_HDCPCFG0_AVMUTE_MASK = 0x8, + HDMI_A_HDCPCFG0_AVMUTE_ENABLE = 0x8, + HDMI_A_HDCPCFG0_AVMUTE_DISABLE = 0x0, + HDMI_A_HDCPCFG0_RXDETECT_MASK = 0x4, + HDMI_A_HDCPCFG0_RXDETECT_ENABLE = 0x4, + HDMI_A_HDCPCFG0_RXDETECT_DISABLE = 0x0, + HDMI_A_HDCPCFG0_EN11FEATURE_MASK = 0x2, + HDMI_A_HDCPCFG0_EN11FEATURE_ENABLE = 0x2, + HDMI_A_HDCPCFG0_EN11FEATURE_DISABLE = 0x0, + HDMI_A_HDCPCFG0_HDMIDVI_MASK = 0x1, + HDMI_A_HDCPCFG0_HDMIDVI_HDMI = 0x1, + HDMI_A_HDCPCFG0_HDMIDVI_DVI = 0x0, + +/* A_HDCPCFG1 field values */ + HDMI_A_HDCPCFG1_DISSHA1CHECK_MASK = 0x8, + HDMI_A_HDCPCFG1_DISSHA1CHECK_DISABLE = 0x8, + HDMI_A_HDCPCFG1_DISSHA1CHECK_ENABLE = 0x0, + HDMI_A_HDCPCFG1_PH2UPSHFTENC_MASK = 0x4, + HDMI_A_HDCPCFG1_PH2UPSHFTENC_ENABLE = 0x4, + HDMI_A_HDCPCFG1_PH2UPSHFTENC_DISABLE = 0x0, + HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK = 0x2, + HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE = 0x2, + HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_ENABLE = 0x0, + HDMI_A_HDCPCFG1_SWRESET_MASK = 0x1, + HDMI_A_HDCPCFG1_SWRESET_ASSERT = 0x0, + +/* A_VIDPOLCFG field values */ + HDMI_A_VIDPOLCFG_UNENCRYPTCONF_MASK = 0x60, + HDMI_A_VIDPOLCFG_UNENCRYPTCONF_OFFSET = 5, + HDMI_A_VIDPOLCFG_DATAENPOL_MASK = 0x10, + HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH = 0x10, + HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW = 0x0, + HDMI_A_VIDPOLCFG_VSYNCPOL_MASK = 0x8, + HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_HIGH = 0x8, + HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_LOW = 0x0, + HDMI_A_VIDPOLCFG_HSYNCPOL_MASK = 0x2, + HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_HIGH = 0x2, + HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_LOW = 0x0, +}; + +#endif /* __MXC_HDMI_H__ */ -- cgit v1.2.1 From e58010b554500eab87603cb1ff9c546b46d8fd60 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Wed, 3 Oct 2012 07:28:43 +0000 Subject: i.MX6: mx6qsabrelite: Add splash screen support Adds support for HDMI, two LVDS panels and one RGB panel to the SABRE-Lite board. Displays supported: HDMI - 1024 x 768 for maximum compatibility Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1) wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600) wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480) Since the ipuv3_fb display driver currently supports only a single display, this code auto-detects panel by probing the HDMI Phy for Hot Plug Detect or the I2C touch controller of the LVDS and RGB displays in the priority listed above. Setting 'panel' environment variable to one of the names above will override auto-detection. Signed-off-by: Eric Nelson --- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 329 ++++++++++++++++++++++++++ include/configs/mx6qsabrelite.h | 15 +- 2 files changed, 343 insertions(+), 1 deletion(-) diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index c19e83c729..af6f9174d5 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -36,6 +36,12 @@ #include #include #include +#include +#include +#include +#include +#include + DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ @@ -375,14 +381,337 @@ int setup_sata(void) } #endif +#if defined(CONFIG_VIDEO_IPUV3) + +static iomux_v3_cfg_t const backlight_pads[] = { + /* Backlight on RGB connector: J15 */ + MX6Q_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL), +#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21) + + /* Backlight on LVDS connector: J6 */ + MX6Q_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL), +#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18) +}; + +static iomux_v3_cfg_t const rgb_pads[] = { + MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, + MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15, + MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2, + MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3, + MX6Q_PAD_DI0_PIN4__GPIO_4_20, + MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0, + MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1, + MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2, + MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3, + MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4, + MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5, + MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6, + MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7, + MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8, + MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9, + MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10, + MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11, + MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12, + MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13, + MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14, + MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15, + MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16, + MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17, + MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18, + MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19, + MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20, + MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21, + MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22, + MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23, +}; + +struct display_info_t { + int bus; + int addr; + int pixfmt; + int (*detect)(struct display_info_t const *dev); + void (*enable)(struct display_info_t const *dev); + struct fb_videomode mode; +}; + + +static int detect_hdmi(struct display_info_t const *dev) +{ + return __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0) & HDMI_PHY_HPD; +} + +static void enable_hdmi(struct display_info_t const *dev) +{ + u8 reg; + printf("%s: setup HDMI monitor\n", __func__); + reg = __raw_readb( + HDMI_ARB_BASE_ADDR + +HDMI_PHY_CONF0); + reg |= HDMI_PHY_CONF0_PDZ_MASK; + __raw_writeb(reg, + HDMI_ARB_BASE_ADDR + +HDMI_PHY_CONF0); + udelay(3000); + reg |= HDMI_PHY_CONF0_ENTMDS_MASK; + __raw_writeb(reg, + HDMI_ARB_BASE_ADDR + +HDMI_PHY_CONF0); + udelay(3000); + reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK; + __raw_writeb(reg, + HDMI_ARB_BASE_ADDR + +HDMI_PHY_CONF0); + __raw_writeb(HDMI_MC_PHYRSTZ_ASSERT, + HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ); +} + +static int detect_i2c(struct display_info_t const *dev) +{ + return ((0 == i2c_set_bus_num(dev->bus)) + && + (0 == i2c_probe(dev->addr))); +} + +static void enable_lvds(struct display_info_t const *dev) +{ + struct iomuxc *iomux = (struct iomuxc *) + IOMUXC_BASE_ADDR; + u32 reg = readl(&iomux->gpr[2]); + reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT; + writel(reg, &iomux->gpr[2]); + gpio_direction_output(LVDS_BACKLIGHT_GP, 1); +} + +static void enable_rgb(struct display_info_t const *dev) +{ + imx_iomux_v3_setup_multiple_pads( + rgb_pads, + ARRAY_SIZE(rgb_pads)); + gpio_direction_output(RGB_BACKLIGHT_GP, 1); +} + +static struct display_info_t const displays[] = {{ + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = detect_hdmi, + .enable = enable_hdmi, + .mode = { + .name = "HDMI", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x4, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = detect_i2c, + .enable = enable_lvds, + .mode = { + .name = "Hannstar-XGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x38, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = detect_i2c, + .enable = enable_lvds, + .mode = { + .name = "wsvga-lvds", + .refresh = 60, + .xres = 1024, + .yres = 600, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x48, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = detect_i2c, + .enable = enable_rgb, + .mode = { + .name = "wvga-rgb", + .refresh = 57, + .xres = 800, + .yres = 480, + .pixclock = 37037, + .left_margin = 40, + .right_margin = 60, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 20, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} } }; + +int board_video_skip(void) +{ + int i; + int ret; + char const *panel = getenv("panel"); + if (!panel) { + for (i = 0; i < ARRAY_SIZE(displays); i++) { + struct display_info_t const *dev = displays+i; + if (dev->detect(dev)) { + panel = dev->mode.name; + printf("auto-detected panel %s\n", panel); + break; + } + } + if (!panel) { + panel = displays[0].mode.name; + printf("No panel detected: default to %s\n", panel); + } + } else { + for (i = 0; i < ARRAY_SIZE(displays); i++) { + if (!strcmp(panel, displays[i].mode.name)) + break; + } + } + if (i < ARRAY_SIZE(displays)) { + ret = ipuv3_fb_init(&displays[i].mode, 0, + displays[i].pixfmt); + if (!ret) { + displays[i].enable(displays+i); + printf("Display: %s (%ux%u)\n", + displays[i].mode.name, + displays[i].mode.xres, + displays[i].mode.yres); + } else + printf("LCD %s cannot be configured: %d\n", + displays[i].mode.name, ret); + } else { + printf("unsupported panel %s\n", panel); + ret = -EINVAL; + } + return (0 != ret); +} + +static void setup_display(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + + int reg; + + /* Turn on LDB0,IPU,IPU DI0 clocks */ + reg = __raw_readl(&mxc_ccm->CCGR3); + reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET + |MXC_CCM_CCGR3_LDB_DI0_MASK; + writel(reg, &mxc_ccm->CCGR3); + + /* Turn on HDMI PHY clock */ + reg = __raw_readl(&mxc_ccm->CCGR2); + reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK + |MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK; + writel(reg, &mxc_ccm->CCGR2); + + /* clear HDMI PHY reset */ + __raw_writeb(HDMI_MC_PHYRSTZ_DEASSERT, + HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ); + + /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */ + writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr); + writel(0x13<pfd_480_set); + + /* set LDB0, LDB1 clk select to 011/011 */ + reg = readl(&mxc_ccm->cs2cdr); + reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK + |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); + reg |= (3<cs2cdr); + + reg = readl(&mxc_ccm->cscmr2); + reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV; + writel(reg, &mxc_ccm->cscmr2); + + reg = readl(&mxc_ccm->chsccdr); + reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK + |MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK + |MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK); + reg |= (CHSCCDR_CLK_SEL_LDB_DI0 + <chsccdr); + + reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES + |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH + |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW + |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG + |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT + |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG + |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT + |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED + |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0; + writel(reg, &iomux->gpr[2]); + + reg = readl(&iomux->gpr[3]); + reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK) + | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 + <gpr[3]); + + /* backlights off until needed */ + imx_iomux_v3_setup_multiple_pads(backlight_pads, + ARRAY_SIZE(backlight_pads)); + gpio_direction_input(LVDS_BACKLIGHT_GP); + gpio_direction_input(RGB_BACKLIGHT_GP); +} +#endif + int board_early_init_f(void) { setup_iomux_uart(); setup_buttons(); +#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif return 0; } +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + int board_init(void) { /* address of boot parameters */ diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index e7bf6582c3..c592a33b00 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -37,7 +37,7 @@ #define CONFIG_REVISION_TAG /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R @@ -119,6 +119,19 @@ /* Miscellaneous commands */ #define CONFIG_CMD_BMODE +/* Framebuffer and LCD */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_IPUV3_CLK 260000000 + /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 -- cgit v1.2.1 From 5676f598e7b62b0ed8f34c6dfb02940c0f66b84b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Mon, 8 Oct 2012 08:34:22 +0000 Subject: mx25: Clean up imx-regs.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Clean up i.MX25 imx-regs.h: - Update mx31 imx-regs.h filename. - Test for __KERNEL_STRICT_NAMES just in case. - Define internal RAM size. Signed-off-by: Benoît Thébaudeau Cc: Stefano Babic --- arch/arm/include/asm/arch-mx25/imx-regs.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index e78029604b..53aafe3075 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -2,7 +2,7 @@ * Copyright (C) 2009, DENX Software Engineering * Author: John Rigby * and arch-mx27/imx-regs.h @@ -33,8 +33,7 @@ #ifndef _IMX_REGS_H #define _IMX_REGS_H -#ifndef __ASSEMBLY__ - +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include #ifdef CONFIG_FEC_MXC @@ -254,6 +253,7 @@ struct aips_regs { /* 128K Internal Static RAM */ #define IMX_RAM_BASE (0x78000000) +#define IMX_RAM_SIZE (128 * 1024) /* SDRAM BANKS */ #define IMX_SDRAM_BANK0_BASE (0x80000000) -- cgit v1.2.1 From 758c3449451f20402af72fa0754a1ce32ba9af48 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 15 Oct 2012 05:37:15 +0000 Subject: mx5: lowlevel_init.S: Split init_clock macro init_clock is currently shared between mx51 and mx53 and it contains lots of ifdef's which makes it really hard to follow the code. Split the init_clock between mx51 and mx53 to allow easier readability. No functional changes are made. Signed-off-by: Fabio Estevam --- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 95 +++++++++++++++++++++++----------- 1 file changed, 65 insertions(+), 30 deletions(-) diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 529e35b440..d0bab4545a 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -162,9 +162,9 @@ setup_pll_func: .endm .macro init_clock +#if defined (CONFIG_MX51) ldr r0, =CCM_BASE_ADDR -#if defined(CONFIG_MX51) /* Gate of clocks to the peripherals first */ ldr r1, =0x3FFFFFFF str r1, [r0, #CLKCTL_CCGR0] @@ -190,21 +190,6 @@ setup_pll_func: 1: ldr r1, [r0, #CLKCTL_CDHIPR] cmp r1, #0x0 bne 1b -#else - ldr r1, =0x3FFFFFFF - str r1, [r0, #CLKCTL_CCGR0] - str r4, [r0, #CLKCTL_CCGR1] - str r4, [r0, #CLKCTL_CCGR2] - str r4, [r0, #CLKCTL_CCGR3] - str r4, [r0, #CLKCTL_CCGR7] - - ldr r1, =0x00030000 - str r1, [r0, #CLKCTL_CCGR4] - ldr r1, =0x00FFF030 - str r1, [r0, #CLKCTL_CCGR5] - ldr r1, =0x0F00030F - str r1, [r0, #CLKCTL_CCGR6] -#endif /* Switch ARM to step clock */ mov r1, #0x4 @@ -217,7 +202,6 @@ setup_pll_func: setup_pll PLL1_BASE_ADDR, 800 #endif -#if defined(CONFIG_MX51) setup_pll PLL3_BASE_ADDR, 665 /* Switch peripheral to PLL 3 */ @@ -234,7 +218,7 @@ setup_pll_func: str r1, [r0, #CLKCTL_CBCDR] ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] -#endif + setup_pll PLL3_BASE_ADDR, 216 /* Set the platform clock dividers */ @@ -244,21 +228,17 @@ setup_pll_func: ldr r0, =CCM_BASE_ADDR -#if defined(CONFIG_MX51) /* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */ ldr r3, [r4, #ROM_SI_REV] cmp r3, #0x10 movls r1, #0x1 movhi r1, #0 -#else - mov r1, #0 -#endif + str r1, [r0, #CLKCTL_CACRR] /* Switch ARM back to PLL 1 */ str r4, [r0, #CLKCTL_CCSR] -#if defined(CONFIG_MX51) /* setup the rest */ /* Use lp_apm (24MHz) source for perclk */ ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL @@ -266,7 +246,6 @@ setup_pll_func: /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ ldr r1, =CONFIG_SYS_CLKTL_CBCDR str r1, [r0, #CLKCTL_CBCDR] -#endif /* Restore the default values in the Gate registers */ ldr r1, =0xFFFFFFFF @@ -277,17 +256,72 @@ setup_pll_func: str r1, [r0, #CLKCTL_CCGR4] str r1, [r0, #CLKCTL_CCGR5] str r1, [r0, #CLKCTL_CCGR6] -#if defined(CONFIG_MX53) - str r1, [r0, #CLKCTL_CCGR7] -#endif -#if defined(CONFIG_MX51) /* Use PLL 2 for UART's, get 66.5MHz from it */ ldr r1, =0xA5A2A020 str r1, [r0, #CLKCTL_CSCMR1] ldr r1, =0x00C30321 str r1, [r0, #CLKCTL_CSCDR1] -#elif defined(CONFIG_MX53) + /* make sure divider effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + str r4, [r0, #CLKCTL_CCDR] + + /* for cko - for ARM div by 8 */ + mov r1, #0x000A0000 + add r1, r1, #0x00000F0 + str r1, [r0, #CLKCTL_CCOSR] +#else /* CONFIG_MX53 */ + ldr r0, =CCM_BASE_ADDR + + /* Gate of clocks to the peripherals first */ + ldr r1, =0x3FFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + str r4, [r0, #CLKCTL_CCGR1] + str r4, [r0, #CLKCTL_CCGR2] + str r4, [r0, #CLKCTL_CCGR3] + str r4, [r0, #CLKCTL_CCGR7] + ldr r1, =0x00030000 + str r1, [r0, #CLKCTL_CCGR4] + ldr r1, =0x00FFF030 + str r1, [r0, #CLKCTL_CCGR5] + ldr r1, =0x0F00030F + str r1, [r0, #CLKCTL_CCGR6] + + /* Switch ARM to step clock */ + mov r1, #0x4 + str r1, [r0, #CLKCTL_CCSR] + + setup_pll PLL1_BASE_ADDR, 800 + + setup_pll PLL3_BASE_ADDR, 216 + + /* Set the platform clock dividers */ + ldr r0, =ARM_BASE_ADDR + ldr r1, =0x00000725 + str r1, [r0, #0x14] + + ldr r0, =CCM_BASE_ADDR + + mov r1, #0 + str r1, [r0, #CLKCTL_CACRR] + + /* Switch ARM back to PLL 1 */ + str r4, [r0, #CLKCTL_CCSR] + + /* Restore the default values in the Gate registers */ + ldr r1, =0xFFFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + str r1, [r0, #CLKCTL_CCGR1] + str r1, [r0, #CLKCTL_CCGR2] + str r1, [r0, #CLKCTL_CCGR3] + str r1, [r0, #CLKCTL_CCGR4] + str r1, [r0, #CLKCTL_CCGR5] + str r1, [r0, #CLKCTL_CCGR6] + str r1, [r0, #CLKCTL_CCGR7] + /* Switch peripheral to PLL2 */ ldr r0, =CCM_BASE_ADDR ldr r1, =0x00808145 @@ -306,7 +340,7 @@ setup_pll_func: and r1, r1, #0xffffffc0 orr r1, r1, #0x0a str r1, [r0, #CLKCTL_CSCDR1] -#endif + /* make sure divider effective */ 1: ldr r1, [r0, #CLKCTL_CDHIPR] cmp r1, #0x0 @@ -318,6 +352,7 @@ setup_pll_func: mov r1, #0x000A0000 add r1, r1, #0x00000F0 str r1, [r0, #CLKCTL_CCOSR] +#endif /* CONFIG_MX53 */ .endm .macro setup_wdog -- cgit v1.2.1 From 782b02884126cc258056e8bf581a410a934f7372 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 15 Oct 2012 05:37:16 +0000 Subject: mx5: lowlevel_init.S: Fix PLL settings for mx53 Currently PLL2 is not explicitely configured for mx53 and it runs at 333MHz. Since PLL2 is the parent clock for DDR2, IPU, VPU, we should set it at 400MHz instead. Without doing so, it is not possible to use a 2.6.35 FSL kernel and display HDMI at 1080p because the IPU clock cannot reach the requested frequency. Set PLL2 to 400MHz, so that 1080p can be played and the DDR2 can run at its maximum frequency. Also, setup the other PLL's as done in FSL U-boot and re-arrange the code a little bit to allow easier comparison with the original clock setup from FSL U-boot. Signed-off-by: Fabio Estevam --- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 96 +++++++++++++++++++++----------- arch/arm/include/asm/arch-mx5/imx-regs.h | 4 ++ 2 files changed, 67 insertions(+), 33 deletions(-) diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index d0bab4545a..d62093be56 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -296,20 +296,66 @@ setup_pll_func: setup_pll PLL1_BASE_ADDR, 800 - setup_pll PLL3_BASE_ADDR, 216 + setup_pll PLL3_BASE_ADDR, 400 + + /* Switch peripheral to PLL3 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x00015154 + str r1, [r0, #CLKCTL_CBCMR] + ldr r1, =0x02888945 + orr r1, r1, #(1 << 16) + str r1, [r0, #CLKCTL_CBCDR] + /* make sure change is effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + setup_pll PLL2_BASE_ADDR, 400 + + /* Switch peripheral to PLL2 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x00808145 + orr r1, r1, #(2 << 10) + orr r1, r1, #(0 << 16) + orr r1, r1, #(1 << 19) + str r1, [r0, #CLKCTL_CBCDR] + + ldr r1, =0x00016154 + str r1, [r0, #CLKCTL_CBCMR] + + /*change uart clk parent to pll2*/ + ldr r1, [r0, #CLKCTL_CSCMR1] + and r1, r1, #0xfcffffff + orr r1, r1, #0x01000000 + str r1, [r0, #CLKCTL_CSCMR1] + + /* make sure change is effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + setup_pll PLL3_BASE_ADDR, 216 + + setup_pll PLL4_BASE_ADDR, 455 /* Set the platform clock dividers */ ldr r0, =ARM_BASE_ADDR - ldr r1, =0x00000725 + ldr r1, =0x00000124 str r1, [r0, #0x14] ldr r0, =CCM_BASE_ADDR - mov r1, #0 str r1, [r0, #CLKCTL_CACRR] - /* Switch ARM back to PLL 1 */ - str r4, [r0, #CLKCTL_CCSR] + /* Switch ARM back to PLL 1. */ + mov r1, #0x0 + str r1, [r0, #CLKCTL_CCSR] + + /* make uart div=6 */ + ldr r1, [r0, #CLKCTL_CSCDR1] + and r1, r1, #0xffffffc0 + orr r1, r1, #0x0a + str r1, [r0, #CLKCTL_CSCDR1] /* Restore the default values in the Gate registers */ ldr r1, =0xFFFFFFFF @@ -322,36 +368,14 @@ setup_pll_func: str r1, [r0, #CLKCTL_CCGR6] str r1, [r0, #CLKCTL_CCGR7] - /* Switch peripheral to PLL2 */ - ldr r0, =CCM_BASE_ADDR - ldr r1, =0x00808145 - orr r1, r1, #2 << 10 - orr r1, r1, #1 << 19 - str r1, [r0, #CLKCTL_CBCDR] + mov r1, #0x00000 + str r1, [r0, #CLKCTL_CCDR] - ldr r1, =0x00016154 - str r1, [r0, #CLKCTL_CBCMR] - /* Change uart clk parent to pll2*/ - ldr r1, [r0, #CLKCTL_CSCMR1] - and r1, r1, #0xfcffffff - orr r1, r1, #0x01000000 - str r1, [r0, #CLKCTL_CSCMR1] - ldr r1, [r0, #CLKCTL_CSCDR1] - and r1, r1, #0xffffffc0 - orr r1, r1, #0x0a - str r1, [r0, #CLKCTL_CSCDR1] - - /* make sure divider effective */ -1: ldr r1, [r0, #CLKCTL_CDHIPR] - cmp r1, #0x0 - bne 1b + /* for cko - for ARM div by 8 */ + mov r1, #0x000A0000 + add r1, r1, #0x00000F0 + str r1, [r0, #CLKCTL_CCOSR] - str r4, [r0, #CLKCTL_CCDR] - - /* for cko - for ARM div by 8 */ - mov r1, #0x000A0000 - add r1, r1, #0x00000F0 - str r1, [r0, #CLKCTL_CCOSR] #endif /* CONFIG_MX53 */ .endm @@ -405,3 +429,9 @@ W_DP_665: .word DP_OP_665 W_DP_216: .word DP_OP_216 .word DP_MFD_216 .word DP_MFN_216 +W_DP_400: .word DP_OP_400 + .word DP_MFD_400 + .word DP_MFN_400 +W_DP_455: .word DP_OP_455 + .word DP_MFD_455 + .word DP_MFN_455 diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 46017f4ad0..1d060fd23e 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -308,6 +308,10 @@ #define DP_MFD_400 (3 - 1) #define DP_MFN_400 1 +#define DP_OP_455 ((9 << 4) + ((2 - 1) << 0)) +#define DP_MFD_455 (48 - 1) +#define DP_MFN_455 23 + #define DP_OP_216 ((6 << 4) + ((3 - 1) << 0)) #define DP_MFD_216 (4 - 1) #define DP_MFN_216 3 -- cgit v1.2.1 From c606608a3427a6b35106e2ddd55c482b6b97265f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 15 Oct 2012 05:37:17 +0000 Subject: mx53loco: Adapt the IPU clock Since PLL2 now has changed, it is necessary to adapt the CONFIG_IPUV3_CLK accordingly. Signed-off-by: Fabio Estevam --- include/configs/mx53loco.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 6a6aaa1923..2ecfbd6bfc 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -222,6 +222,6 @@ #define CONFIG_SPLASH_SCREEN #define CONFIG_BMP_16BPP #define CONFIG_VIDEO_LOGO -#define CONFIG_IPUV3_CLK 133000000 +#define CONFIG_IPUV3_CLK 200000000 #endif /* __CONFIG_H */ -- cgit v1.2.1 From eca04423d14950bf9a7c8238b61a8c5fa26fda82 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 15 Oct 2012 07:26:16 +0000 Subject: configs: mx53loco: Remove CONFIG_HAS_ETH1 mx53loco has only one Ethernet port, so remove CONFIG_HAS_ETH1 option. Signed-off-by: Fabio Estevam --- include/configs/mx53loco.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 2ecfbd6bfc..0658dd3003 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -58,7 +58,6 @@ #define CONFIG_DOS_PARTITION /* Eth Configs */ -#define CONFIG_HAS_ETH1 #define CONFIG_MII #define CONFIG_FEC_MXC -- cgit v1.2.1 From ff7a89bb0f3a3a2a9b63097d899a43c2706f3253 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 15 Oct 2012 07:26:17 +0000 Subject: configs: mx51evk: Remove CONFIG_HAS_ETH1 mx51evk has only one Ethernet port, so remove CONFIG_HAS_ETH1 option. Signed-off-by: Fabio Estevam --- include/configs/mx51evk.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 34b07831cb..d3edcba19b 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -96,7 +96,6 @@ /* * Eth Configs */ -#define CONFIG_HAS_ETH1 #define CONFIG_MII #define CONFIG_FEC_MXC -- cgit v1.2.1 From 0690c69b279b39764925dc880aa11f3eb0f6141b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 15 Oct 2012 07:26:18 +0000 Subject: configs: mx53evk: Remove CONFIG_HAS_ETH1 mx53evk has only one Ethernet port, so remove CONFIG_HAS_ETH1 option. Signed-off-by: Fabio Estevam --- include/configs/mx53evk.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 832050ea97..8fc415eb70 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -73,7 +73,6 @@ #define CONFIG_DOS_PARTITION /* Eth Configs */ -#define CONFIG_HAS_ETH1 #define CONFIG_MII #define CONFIG_FEC_MXC -- cgit v1.2.1 From f5a289ba1ec0323bc588d504a5bb82a21f60cc0d Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Wed, 8 Aug 2012 02:26:31 +0000 Subject: mx6qsabrelite: enable DCache and MMC bounce buffer The recent U-Boot version 2012.07 has improved drivers (e.g. MMC and network/FEC) regarding DCache handling. So it should be safe to use the DCache on the i.MX6, now. Signed-off-by: Dirk Behme Acked-by: Stefano Babic --- include/configs/mx6qsabrelite.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index c592a33b00..5989eb21d9 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -72,6 +72,7 @@ #define CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC +#define CONFIG_MMC_BOUNCE_BUFFER #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -247,8 +248,6 @@ #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ -#define CONFIG_SYS_DCACHE_OFF - #ifndef CONFIG_SYS_DCACHE_OFF #define CONFIG_CMD_CACHE #endif -- cgit v1.2.1 From c4fe17f6d83fa369af90be0764e82150c5879bd0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 May 2012 10:56:00 +0000 Subject: mx5: Add workaround for ARM erratum ID 468414 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the software workaround for ARM erratum ID 468414. According to mx53/mx51 errata document: "ENGcm11133 - ARM: NEON load data can be incorrectly forwarded to a subsequent request Description: Under very specific set of conditions, data from a Neon load request can be incorrectly forwarded to a subsequent, unrelated memory request. The conditions are as follows: • Neon loads and stores must be in use • Neon L1 caching must be disabled • Trustzone must be configured and in use • The secure memory address space and the non-secure memory address space both use the same physical addresses, either as an alias or the same memory location or for separate memory locations The issue is reported by ARM, erratum ID 468414, Category 2" Signed-off-by: Fabio Estevam --- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index d62093be56..29ec95797b 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -26,6 +26,13 @@ .section ".text.init", "x" +.macro init_arm_erratum + /* ARM erratum ID #468414 */ + mrc 15, 0, r1, c1, c0, 1 + orr r1, r1, #(1 << 5) /* enable L1NEON bit */ + mcr 15, 0, r1, c1, c0, 1 +.endm + /* * L2CC Cache setup/invalidation/disable */ @@ -399,6 +406,8 @@ ENTRY(lowlevel_init) str r1, [r0, #0x4] #endif + init_arm_erratum + init_l2cc init_aips -- cgit v1.2.1 From 0208a53fb297bdc56731fd39fc07f0fff387e2ea Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 18 Oct 2012 18:42:00 +0000 Subject: mx25pdk: Use internal RAM for stack pointer Use internal RAM for stack pointer as it is done in other i.MX boards. Signed-off-by: Fabio Estevam --- include/configs/mx25pdk.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 96c143efb9..bd000a7f09 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -15,6 +15,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include + /* High Level Configuration Options */ #define CONFIG_SYS_HZ 1000 @@ -41,8 +43,13 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_ADDR IMX_RAM_BASE +#define CONFIG_SYS_INIT_RAM_SIZE IMX_RAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Memory Test */ #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2) -- cgit v1.2.1 From e6e85cd02624dc3d06192edf17b6c775127f76e8 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 17 Oct 2012 07:33:26 +0000 Subject: mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER Data cache and CONFIG_MMC_BOUNCE_BUFFER can be safely enabled now. Signed-off-by: Fabio Estevam --- include/configs/mx6qsabre_common.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index e25e9439e5..bfb9cd468e 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -45,6 +45,7 @@ #define CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC +#define CONFIG_MMC_BOUNCE_BUFFER #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -168,8 +169,6 @@ #define CONFIG_OF_LIBFDT -#define CONFIG_SYS_DCACHE_OFF - #ifndef CONFIG_SYS_DCACHE_OFF #define CONFIG_CMD_CACHE #endif -- cgit v1.2.1 From c2cfe57e7ce8ea8550cb9b8cc1f35053abe7815f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 17 Oct 2012 07:33:27 +0000 Subject: mx6qarm2: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER Data cache and CONFIG_MMC_BOUNCE_BUFFER can be safely enabled now. Signed-off-by: Fabio Estevam --- include/configs/mx6qarm2.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 965bea37ca..b425fedcf9 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -50,6 +50,7 @@ #define CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC +#define CONFIG_MMC_BOUNCE_BUFFER #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -164,6 +165,4 @@ #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ -#define CONFIG_SYS_DCACHE_OFF - #endif /* __CONFIG_H */ -- cgit v1.2.1 From 4d5fa985361f320c2c9830828bb52979927a4c0e Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Wed, 3 Oct 2012 15:47:03 +0000 Subject: imximage: check dcd_len as entries added Before the len was checked after the entire file was processed, so it could have already overflowed. Signed-off-by: Troy Kisky --- tools/imximage.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/tools/imximage.c b/tools/imximage.c index 03a7716673..c9170366b9 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -71,6 +71,7 @@ static uint32_t imximage_version; static set_dcd_val_t set_dcd_val; static set_dcd_rst_t set_dcd_rst; static set_imx_hdr_t set_imx_hdr; +static uint32_t max_dcd_entries; static uint32_t get_cfg_value(char *token, char *name, int linenr) { @@ -170,13 +171,6 @@ static void set_dcd_rst_v1(struct imx_header *imxhdr, uint32_t dcd_len, { dcd_v1_t *dcd_v1 = &imxhdr->header.hdr_v1.dcd_table; - if (dcd_len > MAX_HW_CFG_SIZE_V1) { - fprintf(stderr, "Error: %s[%d] -" - "DCD table exceeds maximum size(%d)\n", - name, lineno, MAX_HW_CFG_SIZE_V1); - exit(EXIT_FAILURE); - } - dcd_v1->preamble.barker = DCD_BARKER; dcd_v1->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t); } @@ -190,13 +184,6 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len, { dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table; - if (dcd_len > MAX_HW_CFG_SIZE_V2) { - fprintf(stderr, "Error: %s[%d] -" - "DCD table exceeds maximum size(%d)\n", - name, lineno, MAX_HW_CFG_SIZE_V2); - exit(EXIT_FAILURE); - } - dcd_v2->header.tag = DCD_HEADER_TAG; dcd_v2->header.length = cpu_to_be16( dcd_len * sizeof(dcd_addr_data_t) + 8); @@ -295,11 +282,13 @@ static void set_hdr_func(struct imx_header *imxhdr) set_dcd_val = set_dcd_val_v1; set_dcd_rst = set_dcd_rst_v1; set_imx_hdr = set_imx_hdr_v1; + max_dcd_entries = MAX_HW_CFG_SIZE_V1; break; case IMXIMAGE_V2: set_dcd_val = set_dcd_val_v2; set_dcd_rst = set_dcd_rst_v2; set_imx_hdr = set_imx_hdr_v2; + max_dcd_entries = MAX_HW_CFG_SIZE_V2; break; default: err_imximage_version(imximage_version); @@ -426,8 +415,15 @@ static void parse_cfg_fld(struct imx_header *imxhdr, int32_t *cmd, value = get_cfg_value(token, name, lineno); (*set_dcd_val)(imxhdr, name, lineno, fld, value, *dcd_len); - if (fld == CFG_REG_VALUE) + if (fld == CFG_REG_VALUE) { (*dcd_len)++; + if (*dcd_len > max_dcd_entries) { + fprintf(stderr, "Error: %s[%d] -" + "DCD table exceeds maximum size(%d)\n", + name, lineno, max_dcd_entries); + exit(EXIT_FAILURE); + } + } break; default: break; -- cgit v1.2.1 From f14e6258f3ff7488a1899d784c6d62957c2df859 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Wed, 3 Oct 2012 15:47:04 +0000 Subject: imximage: remove redundant setting of app_dest_ptr Signed-off-by: Troy Kisky Acked-by: Stefano Babic --- tools/imximage.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/imximage.c b/tools/imximage.c index c9170366b9..bda1a75df3 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -213,7 +213,6 @@ static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, /* Set magic number */ fhdr_v1->app_code_barker = APP_CODE_BARKER; - fhdr_v1->app_dest_ptr = params->addr; fhdr_v1->app_dest_ptr = params->ep - imxhdr->flash_offset - sizeof(struct imx_header); fhdr_v1->app_code_jump_vector = params->ep; -- cgit v1.2.1 From 8d8cc828f456a64143a0b94c751f8cfcecfe5dcc Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Wed, 3 Oct 2012 15:47:05 +0000 Subject: imximage: move flash_offset check to common location Both set_imx_hdr_v1 and set_imx_hdr_v2 perform the same check. Move check to before the set_imx_hdr call. Signed-off-by: Troy Kisky Acked-by: Stefano Babic --- tools/imximage.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/tools/imximage.c b/tools/imximage.c index bda1a75df3..3e9ee6ac5d 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -203,13 +203,6 @@ static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table; uint32_t base_offset; - /* Exit if there is no BOOT_FROM field specifying the flash_offset */ - if(imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) { - fprintf(stderr, "Error: Header v1: No BOOT_FROM tag in %s\n", - params->imagename); - exit(EXIT_FAILURE); - } - /* Set magic number */ fhdr_v1->app_code_barker = APP_CODE_BARKER; @@ -243,13 +236,6 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, imx_header_v2_t *hdr_v2 = &imxhdr->header.hdr_v2; flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr; - /* Exit if there is no BOOT_FROM field specifying the flash_offset */ - if(imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) { - fprintf(stderr, "Error: Header v2: No BOOT_FROM tag in %s\n", - params->imagename); - exit(EXIT_FAILURE); - } - /* Set magic number */ fhdr_v2->header.tag = IVT_HEADER_TAG; /* 0xD1 */ fhdr_v2->header.length = cpu_to_be16(sizeof(flash_header_v2_t)); @@ -475,6 +461,11 @@ static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name) (*set_dcd_rst)(imxhdr, dcd_len, name, lineno); fclose(fd); + /* Exit if there is no BOOT_FROM field specifying the flash_offset */ + if (imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) { + fprintf(stderr, "Error: No BOOT_FROM tag in %s\n", name); + exit(EXIT_FAILURE); + } return dcd_len; } -- cgit v1.2.1 From 348ca8efb79652d2b259fbd0ed6d317a77a8cbb9 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Wed, 3 Oct 2012 15:47:06 +0000 Subject: imximage: fix size of image to load. sbuf->st_size already includes sizeof(struct imx_header), so remove extra addition. Signed-off-by: Troy Kisky --- tools/imximage.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/tools/imximage.c b/tools/imximage.c index 3e9ee6ac5d..7dbf36cf4f 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -221,8 +221,7 @@ static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, /* The external flash header must be at the end of the DCD table */ dcd_v1->addr_data[dcd_len].type = sbuf->st_size + - imxhdr->flash_offset + - sizeof(struct imx_header); + imxhdr->flash_offset; /* Security feature are not supported */ fhdr_v1->app_code_csf = 0; @@ -253,8 +252,7 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, hdr_v2->boot_data.start = fhdr_v2->self - imxhdr->flash_offset; hdr_v2->boot_data.size = sbuf->st_size + - imxhdr->flash_offset + - sizeof(struct imx_header); + imxhdr->flash_offset; /* Security feature are not supported */ fhdr_v2->csf = 0; -- cgit v1.2.1 From 243319825fa6e79885d57b6b78e72f3fe10ef69c Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Wed, 3 Oct 2012 15:47:07 +0000 Subject: imximage: delay setting of image size When later we change to variable length header, we won't know the file size when set_imx_hdr is called. So this is prep work. Signed-off-by: Troy Kisky --- tools/imximage.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/imximage.c b/tools/imximage.c index 7dbf36cf4f..bed53f06bb 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -72,6 +72,7 @@ static set_dcd_val_t set_dcd_val; static set_dcd_rst_t set_dcd_rst; static set_imx_hdr_t set_imx_hdr; static uint32_t max_dcd_entries; +static uint32_t *header_size_ptr; static uint32_t get_cfg_value(char *token, char *name, int linenr) { @@ -202,6 +203,8 @@ static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr; dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table; uint32_t base_offset; + uint32_t header_length = (((char *)&dcd_v1->addr_data[dcd_len].addr) + - ((char *)imxhdr)); /* Set magic number */ fhdr_v1->app_code_barker = APP_CODE_BARKER; @@ -219,13 +222,10 @@ static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, fhdr_v1->dcd_ptr = base_offset + offsetof(imx_header_v1_t, dcd_table); - /* The external flash header must be at the end of the DCD table */ - dcd_v1->addr_data[dcd_len].type = sbuf->st_size + - imxhdr->flash_offset; - /* Security feature are not supported */ fhdr_v1->app_code_csf = 0; fhdr_v1->super_root_key = 0; + header_size_ptr = (uint32_t *)(((char *)imxhdr) + header_length - 4); } static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, @@ -251,11 +251,10 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, offsetof(imx_header_v2_t, boot_data); hdr_v2->boot_data.start = fhdr_v2->self - imxhdr->flash_offset; - hdr_v2->boot_data.size = sbuf->st_size + - imxhdr->flash_offset; /* Security feature are not supported */ fhdr_v2->csf = 0; + header_size_ptr = &hdr_v2->boot_data.size; } static void set_hdr_func(struct imx_header *imxhdr) @@ -526,6 +525,7 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, /* Set the imx header */ (*set_imx_hdr)(imxhdr, dcd_len, sbuf, params); + *header_size_ptr = sbuf->st_size + imxhdr->flash_offset; } int imximage_check_params(struct mkimage_params *params) -- cgit v1.2.1 From ad0826dcd81ba6cf4cc93a4ca8337e1bc676c238 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Wed, 3 Oct 2012 15:47:08 +0000 Subject: imximage: change parameters to set_imx_hdr Call with the value the function will use instead of going through a pointer. Signed-off-by: Troy Kisky --- tools/imximage.c | 20 +++++++++----------- tools/imximage.h | 6 ++---- 2 files changed, 11 insertions(+), 15 deletions(-) diff --git a/tools/imximage.c b/tools/imximage.c index bed53f06bb..87a6b59e00 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -196,8 +196,7 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len, } static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, - struct stat *sbuf, - struct mkimage_params *params) + uint32_t entry_point, uint32_t flash_offset) { imx_header_v1_t *hdr_v1 = &imxhdr->header.hdr_v1; flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr; @@ -209,11 +208,11 @@ static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, /* Set magic number */ fhdr_v1->app_code_barker = APP_CODE_BARKER; - fhdr_v1->app_dest_ptr = params->ep - imxhdr->flash_offset - + fhdr_v1->app_dest_ptr = entry_point - flash_offset - sizeof(struct imx_header); - fhdr_v1->app_code_jump_vector = params->ep; + fhdr_v1->app_code_jump_vector = entry_point; - base_offset = fhdr_v1->app_dest_ptr + imxhdr->flash_offset ; + base_offset = fhdr_v1->app_dest_ptr + flash_offset; fhdr_v1->dcd_ptr_ptr = (uint32_t) (offsetof(flash_header_v1_t, dcd_ptr) - offsetof(flash_header_v1_t, app_code_jump_vector) + @@ -229,8 +228,7 @@ static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, } static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, - struct stat *sbuf, - struct mkimage_params *params) + uint32_t entry_point, uint32_t flash_offset) { imx_header_v2_t *hdr_v2 = &imxhdr->header.hdr_v2; flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr; @@ -240,9 +238,9 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, fhdr_v2->header.length = cpu_to_be16(sizeof(flash_header_v2_t)); fhdr_v2->header.version = IVT_VERSION; /* 0x40 */ - fhdr_v2->entry = params->ep; + fhdr_v2->entry = entry_point; fhdr_v2->reserved1 = fhdr_v2->reserved2 = 0; - fhdr_v2->self = params->ep - sizeof(struct imx_header); + fhdr_v2->self = entry_point - sizeof(struct imx_header); fhdr_v2->dcd_ptr = fhdr_v2->self + offsetof(imx_header_v2_t, dcd_table); @@ -250,7 +248,7 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, fhdr_v2->boot_data_ptr = fhdr_v2->self + offsetof(imx_header_v2_t, boot_data); - hdr_v2->boot_data.start = fhdr_v2->self - imxhdr->flash_offset; + hdr_v2->boot_data.start = fhdr_v2->self - flash_offset; /* Security feature are not supported */ fhdr_v2->csf = 0; @@ -524,7 +522,7 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, dcd_len = parse_cfg_file(imxhdr, params->imagename); /* Set the imx header */ - (*set_imx_hdr)(imxhdr, dcd_len, sbuf, params); + (*set_imx_hdr)(imxhdr, dcd_len, params->ep, imxhdr->flash_offset); *header_size_ptr = sbuf->st_size + imxhdr->flash_offset; } diff --git a/tools/imximage.h b/tools/imximage.h index 34f293d95a..42b60906fd 100644 --- a/tools/imximage.h +++ b/tools/imximage.h @@ -168,9 +168,7 @@ typedef void (*set_dcd_rst_t)(struct imx_header *imxhdr, uint32_t dcd_len, char *name, int lineno); -typedef void (*set_imx_hdr_t)(struct imx_header *imxhdr, - uint32_t dcd_len, - struct stat *sbuf, - struct mkimage_params *params); +typedef void (*set_imx_hdr_t)(struct imx_header *imxhdr, uint32_t dcd_len, + uint32_t entry_point, uint32_t flash_offset); #endif /* _IMXIMAGE_H_ */ -- cgit v1.2.1 From ab857f2613be39274d0870768720067ff9d859c0 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Wed, 3 Oct 2012 15:47:09 +0000 Subject: imximage: make set_imx_hdr_v1/v2 easier to read Signed-off-by: Troy Kisky --- tools/imximage.c | 30 +++++++++++------------------- 1 file changed, 11 insertions(+), 19 deletions(-) diff --git a/tools/imximage.c b/tools/imximage.c index 87a6b59e00..63f88b6c42 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -201,25 +201,19 @@ static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, imx_header_v1_t *hdr_v1 = &imxhdr->header.hdr_v1; flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr; dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table; - uint32_t base_offset; + uint32_t hdr_base; uint32_t header_length = (((char *)&dcd_v1->addr_data[dcd_len].addr) - ((char *)imxhdr)); /* Set magic number */ fhdr_v1->app_code_barker = APP_CODE_BARKER; - fhdr_v1->app_dest_ptr = entry_point - flash_offset - - sizeof(struct imx_header); + hdr_base = entry_point - sizeof(struct imx_header); + fhdr_v1->app_dest_ptr = hdr_base - flash_offset; fhdr_v1->app_code_jump_vector = entry_point; - base_offset = fhdr_v1->app_dest_ptr + flash_offset; - fhdr_v1->dcd_ptr_ptr = - (uint32_t) (offsetof(flash_header_v1_t, dcd_ptr) - - offsetof(flash_header_v1_t, app_code_jump_vector) + - base_offset); - - fhdr_v1->dcd_ptr = base_offset + - offsetof(imx_header_v1_t, dcd_table); + fhdr_v1->dcd_ptr_ptr = hdr_base + offsetof(flash_header_v1_t, dcd_ptr); + fhdr_v1->dcd_ptr = hdr_base + offsetof(imx_header_v1_t, dcd_table); /* Security feature are not supported */ fhdr_v1->app_code_csf = 0; @@ -232,6 +226,7 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, { imx_header_v2_t *hdr_v2 = &imxhdr->header.hdr_v2; flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr; + uint32_t hdr_base; /* Set magic number */ fhdr_v2->header.tag = IVT_HEADER_TAG; /* 0xD1 */ @@ -240,15 +235,12 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, fhdr_v2->entry = entry_point; fhdr_v2->reserved1 = fhdr_v2->reserved2 = 0; - fhdr_v2->self = entry_point - sizeof(struct imx_header); - - fhdr_v2->dcd_ptr = fhdr_v2->self + - offsetof(imx_header_v2_t, dcd_table); - - fhdr_v2->boot_data_ptr = fhdr_v2->self + - offsetof(imx_header_v2_t, boot_data); + fhdr_v2->self = hdr_base = entry_point - sizeof(struct imx_header); - hdr_v2->boot_data.start = fhdr_v2->self - flash_offset; + fhdr_v2->dcd_ptr = hdr_base + offsetof(imx_header_v2_t, dcd_table); + fhdr_v2->boot_data_ptr = hdr_base + + offsetof(imx_header_v2_t, boot_data); + hdr_v2->boot_data.start = hdr_base - flash_offset; /* Security feature are not supported */ fhdr_v2->csf = 0; -- cgit v1.2.1 From 25164218b7c2abc3316c2a3ba7247487b4c81541 Mon Sep 17 00:00:00 2001 From: Andrew Bradford Date: Thu, 25 Oct 2012 08:21:29 -0400 Subject: am33xx: Enable UART{1,2,3,4,5} clocks If configured to use UART{1,2,3,4,5} such as on the Beaglebone RS232 cape or the am335x_evm daughterboard, enable the required clocks for the UART in use. Signed-off-by: Andrew Bradford --- arch/arm/cpu/armv7/am33xx/clock.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index f870859414..bc2abb657c 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -115,6 +115,41 @@ static void enable_per_clocks(void) while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN) ; + /* UART1 */ +#ifdef CONFIG_SERIAL2 + writel(PRCM_MOD_EN, &cmper->uart1clkctrl); + while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL2 */ + + /* UART2 */ +#ifdef CONFIG_SERIAL3 + writel(PRCM_MOD_EN, &cmper->uart2clkctrl); + while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL3 */ + + /* UART3 */ +#ifdef CONFIG_SERIAL4 + writel(PRCM_MOD_EN, &cmper->uart3clkctrl); + while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL4 */ + + /* UART4 */ +#ifdef CONFIG_SERIAL5 + writel(PRCM_MOD_EN, &cmper->uart4clkctrl); + while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL5 */ + + /* UART5 */ +#ifdef CONFIG_SERIAL6 + writel(PRCM_MOD_EN, &cmper->uart5clkctrl); + while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL6 */ + /* MMC0*/ writel(PRCM_MOD_EN, &cmper->mmc0clkctrl); while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN) -- cgit v1.2.1 From 6422b70bd511483231955431e6cb66546266acdc Mon Sep 17 00:00:00 2001 From: Andrew Bradford Date: Thu, 25 Oct 2012 08:21:30 -0400 Subject: am33xx: Enable UART{1,2,3,4,5} pin-mux If configured to use UART{1,2,3,4,5} such as on the Beaglebone RS232 cape or on the am335x_evm daughterboard, enable the proper pin-muxing. Signed-off-by: Andrew Bradford --- board/ti/am335x/board.c | 17 ++++++++++++++++ board/ti/am335x/board.h | 5 +++++ board/ti/am335x/mux.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 76 insertions(+) diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 5d279ecdbc..013ad881f0 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -242,7 +242,24 @@ void s_init(void) /* UART softreset */ u32 regVal; +#ifdef CONFIG_SERIAL1 enable_uart0_pin_mux(); +#endif /* CONFIG_SERIAL1 */ +#ifdef CONFIG_SERIAL2 + enable_uart1_pin_mux(); +#endif /* CONFIG_SERIAL2 */ +#ifdef CONFIG_SERIAL3 + enable_uart2_pin_mux(); +#endif /* CONFIG_SERIAL3 */ +#ifdef CONFIG_SERIAL4 + enable_uart3_pin_mux(); +#endif /* CONFIG_SERIAL4 */ +#ifdef CONFIG_SERIAL5 + enable_uart4_pin_mux(); +#endif /* CONFIG_SERIAL5 */ +#ifdef CONFIG_SERIAL6 + enable_uart5_pin_mux(); +#endif /* CONFIG_SERIAL6 */ regVal = readl(&uart_base->uartsyscfg); regVal |= UART_RESET; diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h index 7985ab2c14..48e112e230 100644 --- a/board/ti/am335x/board.h +++ b/board/ti/am335x/board.h @@ -44,6 +44,11 @@ struct am335x_baseboard_id { * is required on the board. */ void enable_uart0_pin_mux(void); +void enable_uart1_pin_mux(void); +void enable_uart2_pin_mux(void); +void enable_uart3_pin_mux(void); +void enable_uart4_pin_mux(void); +void enable_uart5_pin_mux(void); void enable_i2c0_pin_mux(void); void enable_board_pin_mux(struct am335x_baseboard_id *header); #endif diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 29929791fc..6a5f23a551 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -27,6 +27,36 @@ static struct module_pin_mux uart0_pin_mux[] = { {-1}, }; +static struct module_pin_mux uart1_pin_mux[] = { + {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */ + {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */ + {-1}, +}; + +static struct module_pin_mux uart2_pin_mux[] = { + {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */ + {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */ + {-1}, +}; + +static struct module_pin_mux uart3_pin_mux[] = { + {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ + {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ + {-1}, +}; + +static struct module_pin_mux uart4_pin_mux[] = { + {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */ + {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */ + {-1}, +}; + +static struct module_pin_mux uart5_pin_mux[] = { + {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */ + {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */ + {-1}, +}; + static struct module_pin_mux mmc0_pin_mux[] = { {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ @@ -135,6 +165,30 @@ void enable_uart0_pin_mux(void) configure_module_pin_mux(uart0_pin_mux); } +void enable_uart1_pin_mux(void) +{ + configure_module_pin_mux(uart1_pin_mux); +} + +void enable_uart2_pin_mux(void) +{ + configure_module_pin_mux(uart2_pin_mux); +} + +void enable_uart3_pin_mux(void) +{ + configure_module_pin_mux(uart3_pin_mux); +} + +void enable_uart4_pin_mux(void) +{ + configure_module_pin_mux(uart4_pin_mux); +} + +void enable_uart5_pin_mux(void) +{ + configure_module_pin_mux(uart5_pin_mux); +} void enable_i2c0_pin_mux(void) { -- cgit v1.2.1 From 96708a06052e49489b46fb91bf83f3f7d20430b8 Mon Sep 17 00:00:00 2001 From: Andrew Bradford Date: Thu, 25 Oct 2012 08:21:31 -0400 Subject: serial: ns16550: Enable COM5 and COM6 Increase the possible number of ns16550 serial devices from 4 to 6. Signed-off-by: Andrew Bradford --- drivers/serial/serial_ns16550.c | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c index b5d12481ca..5fb38410a8 100644 --- a/drivers/serial/serial_ns16550.c +++ b/drivers/serial/serial_ns16550.c @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; #if !defined(CONFIG_CONS_INDEX) -#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4) +#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 6) #error "Invalid console index value." #endif @@ -46,12 +46,16 @@ DECLARE_GLOBAL_DATA_PTR; #error "Console port 3 defined but not configured." #elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4) #error "Console port 4 defined but not configured." +#elif CONFIG_CONS_INDEX == 5 && !defined(CONFIG_SYS_NS16550_COM5) +#error "Console port 5 defined but not configured." +#elif CONFIG_CONS_INDEX == 6 && !defined(CONFIG_SYS_NS16550_COM6) +#error "Console port 6 defined but not configured." #endif /* Note: The port number specified in the functions is 1 based. * the array is 0 based. */ -static NS16550_t serial_ports[4] = { +static NS16550_t serial_ports[6] = { #ifdef CONFIG_SYS_NS16550_COM1 (NS16550_t)CONFIG_SYS_NS16550_COM1, #else @@ -68,7 +72,17 @@ static NS16550_t serial_ports[4] = { NULL, #endif #ifdef CONFIG_SYS_NS16550_COM4 - (NS16550_t)CONFIG_SYS_NS16550_COM4 + (NS16550_t)CONFIG_SYS_NS16550_COM4, +#else + NULL, +#endif +#ifdef CONFIG_SYS_NS16550_COM5 + (NS16550_t)CONFIG_SYS_NS16550_COM5, +#else + NULL, +#endif +#ifdef CONFIG_SYS_NS16550_COM6 + (NS16550_t)CONFIG_SYS_NS16550_COM6 #else NULL #endif @@ -231,6 +245,12 @@ struct serial_device eserial3_device = DECLARE_ESERIAL_FUNCTIONS(4); struct serial_device eserial4_device = INIT_ESERIAL_STRUCTURE(4, "eserial3"); +DECLARE_ESERIAL_FUNCTIONS(5); +struct serial_device eserial5_device = + INIT_ESERIAL_STRUCTURE(5, "eserial4"); +DECLARE_ESERIAL_FUNCTIONS(6); +struct serial_device eserial6_device = + INIT_ESERIAL_STRUCTURE(6, "eserial5"); __weak struct serial_device *default_serial_console(void) { @@ -242,6 +262,10 @@ __weak struct serial_device *default_serial_console(void) return &eserial3_device; #elif CONFIG_CONS_INDEX == 4 return &eserial4_device; +#elif CONFIG_CONS_INDEX == 5 + return &eserial5_device; +#elif CONFIG_CONS_INDEX == 6 + return &eserial6_device; #else #error "Bad CONFIG_CONS_INDEX." #endif @@ -261,4 +285,10 @@ void ns16550_serial_initialize(void) #if defined(CONFIG_SYS_NS16550_COM4) serial_register(&eserial4_device); #endif +#if defined(CONFIG_SYS_NS16550_COM5) + serial_register(&eserial5_device); +#endif +#if defined(CONFIG_SYS_NS16550_COM6) + serial_register(&eserial6_device); +#endif } -- cgit v1.2.1 From c3f8318f33eb4eb79b3b5c5204a438d499572de0 Mon Sep 17 00:00:00 2001 From: Andrew Bradford Date: Thu, 25 Oct 2012 08:21:32 -0400 Subject: am335x_evm: Enable use of UART{1,2,3,4,5} Add targets of am335x_evm_uart{1,2,3,4,5} to have serial input/output on UART{1,2,3,4,5} for use with the Beaglebone RS232 cape, am335x_evm daughterboard, and other custom configurations. Modify target for am335x_evm to include SERIAL1 and CONS_INDEX=1 options in order to clarify UART selection requirements. Signed-off-by: Andrew Bradford --- boards.cfg | 7 ++++++- include/configs/am335x_evm.h | 12 +++++++----- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/boards.cfg b/boards.cfg index d467f566c0..a1bae069c2 100644 --- a/boards.cfg +++ b/boards.cfg @@ -225,7 +225,12 @@ versatileqemu arm arm926ejs versatile armltd integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES ca9x4_ct_vxp arm armv7 vexpress armltd -am335x_evm arm armv7 am335x ti am33xx +am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1 +am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2 +am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3 +am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4 +am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5 +am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6 highbank arm armv7 highbank - highbank mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 58d62d0c7d..cdb6697890 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -158,9 +158,15 @@ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SERIAL_MULTI #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ /* I2C Configuration */ #define CONFIG_I2C @@ -182,11 +188,7 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 -#define CONFIG_CONS_INDEX 1 +#define CONFIG_ENV_OVERWRITE 1 #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_ENV_IS_NOWHERE -- cgit v1.2.1 From 01968b96a24414ff8f0735111907cbb750c7af43 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Wed, 24 Oct 2012 10:06:28 +0200 Subject: MX5: fix warning in clock.c Patch fix warnings compiling with ELDK-4.2: clock.c: In function 'get_standard_pll_sel_clk': clock.c:341: warning: 'freq' may be used uninitialized in this function Reported-by : Marek Vasut Signed-off-by: Stefano Babic --- arch/arm/cpu/armv7/mx5/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index 2709860ca2..1c9223fa07 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -338,7 +338,7 @@ static u32 get_ipg_per_clk(void) /* Get the output clock rate of a standard PLL MUX for peripherals. */ static u32 get_standard_pll_sel_clk(u32 clk_sel) { - u32 freq; + u32 freq = 0; switch (clk_sel & 0x3) { case 0: -- cgit v1.2.1 From 73286d8729c0a2325911719492218477caa2c58e Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Wed, 3 Oct 2012 04:26:28 +0000 Subject: tegra: move common features to a common makefile For Non-Nvidia boards to include newly added features (like emc clock scaling) it would be necessary to add each feature to their own board Makefile. This is because currently the top Makefile automaticly includes these features only for Nvidia boards. This patch adds a simple Makefile include so all new features become available for non-Nvidia board vendors. Cc: Stephen Warren Cc: Tom Warren Cc: Thierry Reding Cc: Lucas Stach Signed-off-by: Marc Dietrich Acked-by: Stephen Warren Acked-by: Thierry Reding Signed-off-by: Tom Warren --- board/avionic-design/medcom-wide/Makefile | 6 ++++-- board/avionic-design/plutux/Makefile | 6 ++++-- board/avionic-design/tec/Makefile | 6 ++++-- board/compal/paz00/Makefile | 6 ++++-- board/compulab/trimslice/Makefile | 6 ++++-- board/nvidia/common/Makefile | 4 +--- board/nvidia/common/common.mk | 4 ++++ 7 files changed, 25 insertions(+), 13 deletions(-) create mode 100644 board/nvidia/common/common.mk diff --git a/board/avionic-design/medcom-wide/Makefile b/board/avionic-design/medcom-wide/Makefile index 864bc0ec01..e8c1e8b287 100644 --- a/board/avionic-design/medcom-wide/Makefile +++ b/board/avionic-design/medcom-wide/Makefile @@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := ../../nvidia/common/board.o -COBJS += ../common/tamonten.o +COBJS-y := ../common/tamonten.o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/avionic-design/plutux/Makefile b/board/avionic-design/plutux/Makefile index 864bc0ec01..e8c1e8b287 100644 --- a/board/avionic-design/plutux/Makefile +++ b/board/avionic-design/plutux/Makefile @@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := ../../nvidia/common/board.o -COBJS += ../common/tamonten.o +COBJS-y := ../common/tamonten.o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/avionic-design/tec/Makefile b/board/avionic-design/tec/Makefile index 864bc0ec01..e8c1e8b287 100644 --- a/board/avionic-design/tec/Makefile +++ b/board/avionic-design/tec/Makefile @@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := ../../nvidia/common/board.o -COBJS += ../common/tamonten.o +COBJS-y := ../common/tamonten.o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile index 7f7287ee9a..fa5c510340 100644 --- a/board/compal/paz00/Makefile +++ b/board/compal/paz00/Makefile @@ -20,9 +20,11 @@ $(shell mkdir -p $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := $(BOARD).o -COBJS += ../../nvidia/common/board.o +COBJS-y := $(BOARD).o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile index ff0787967d..cc844d2e07 100644 --- a/board/compulab/trimslice/Makefile +++ b/board/compulab/trimslice/Makefile @@ -28,9 +28,11 @@ $(shell mkdir -p $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := $(BOARD).o -COBJS += ../../nvidia/common/board.o +COBJS-y := $(BOARD).o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/nvidia/common/Makefile b/board/nvidia/common/Makefile index a93d4583e7..f6f419e0ce 100644 --- a/board/nvidia/common/Makefile +++ b/board/nvidia/common/Makefile @@ -25,9 +25,7 @@ endif LIB = $(obj)lib$(VENDOR).o -COBJS-y += board.o -COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o -COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o +include common.mk COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/nvidia/common/common.mk b/board/nvidia/common/common.mk new file mode 100644 index 0000000000..bd6202c299 --- /dev/null +++ b/board/nvidia/common/common.mk @@ -0,0 +1,4 @@ +# common options for all tegra boards +COBJS-y += ../../nvidia/common/board.o +COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o +COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o -- cgit v1.2.1 From 6bbda88384948808dd4050624a6c27d6d63265a1 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Sun, 7 Oct 2012 11:36:06 +0000 Subject: tegra: add Colibri T20 board support This adds board support for the Toradex Colibri T20 module. Working functions: - SD card boot - USB boot - Network - NAND environment Signed-off-by: Lucas Stach Signed-off-by: Tom Warren --- MAINTAINERS | 4 ++ .../colibri_t20-common/colibri_t20-common.c | 44 ++++++++++++ .../colibri_t20-common/colibri_t20-common.h | 16 +++++ board/toradex/colibri_t20_iris/Makefile | 40 +++++++++++ board/toradex/colibri_t20_iris/colibri_t20_iris.c | 46 ++++++++++++ board/toradex/dts/tegra20-colibri_t20_iris.dts | 38 ++++++++++ boards.cfg | 1 + include/configs/colibri_t20_iris.h | 83 ++++++++++++++++++++++ 8 files changed, 272 insertions(+) create mode 100644 board/toradex/colibri_t20-common/colibri_t20-common.c create mode 100644 board/toradex/colibri_t20-common/colibri_t20-common.h create mode 100644 board/toradex/colibri_t20_iris/Makefile create mode 100644 board/toradex/colibri_t20_iris/colibri_t20_iris.c create mode 100644 board/toradex/dts/tegra20-colibri_t20_iris.dts create mode 100644 include/configs/colibri_t20_iris.h diff --git a/MAINTAINERS b/MAINTAINERS index 1b2da9421a..5a500c5a24 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -902,6 +902,10 @@ Michal Simek zynq ARM ARMV7 (Zynq SoC) +Lucas Stach + + colibri_t20_iris Tegra20 (ARM7 & A9 Dual Core) + Nick Thompson da830evm ARM926EJS (DA830/OMAP-L137) diff --git a/board/toradex/colibri_t20-common/colibri_t20-common.c b/board/toradex/colibri_t20-common/colibri_t20-common.c new file mode 100644 index 0000000000..6d5e47d38e --- /dev/null +++ b/board/toradex/colibri_t20-common/colibri_t20-common.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include + +#include "colibri_t20-common.h" + +#ifdef CONFIG_USB_EHCI_TEGRA +void colibri_t20_common_pin_mux_usb(void) +{ + /* module internal USB bus to connect ethernet chipset */ + funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI); + /* ULPI reference clock output */ + pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4); + pinmux_tristate_disable(PINGRP_CDEV2); + /* PHY reset GPIO */ + pinmux_tristate_disable(PINGRP_UAC); + /* VBus GPIO */ + pinmux_tristate_disable(PINGRP_DTE); +} +#endif + +#ifdef CONFIG_TEGRA_NAND +void pin_mux_nand(void) +{ + funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_NDFLASH_KBC_8_BIT); +} +#endif diff --git a/board/toradex/colibri_t20-common/colibri_t20-common.h b/board/toradex/colibri_t20-common/colibri_t20-common.h new file mode 100644 index 0000000000..76dc8608d5 --- /dev/null +++ b/board/toradex/colibri_t20-common/colibri_t20-common.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +void colibri_t20_common_pin_mux_usb(void); diff --git a/board/toradex/colibri_t20_iris/Makefile b/board/toradex/colibri_t20_iris/Makefile new file mode 100644 index 0000000000..c138729a48 --- /dev/null +++ b/board/toradex/colibri_t20_iris/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2012 Lucas Stach +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# + +include $(TOPDIR)/config.mk + +$(shell mkdir -p $(obj)../../nvidia/common) +$(shell mkdir -p $(obj)../colibri_t20-common) + +LIB = $(obj)lib$(BOARD).o + +COBJS := ../../nvidia/common/board.o +COBJS += ../colibri_t20-common/colibri_t20-common.o +COBJS += $(BOARD).o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/toradex/colibri_t20_iris/colibri_t20_iris.c b/board/toradex/colibri_t20_iris/colibri_t20_iris.c new file mode 100644 index 0000000000..e40a98609f --- /dev/null +++ b/board/toradex/colibri_t20_iris/colibri_t20_iris.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "../colibri_t20-common/colibri_t20-common.h" + +#ifdef CONFIG_USB_EHCI_TEGRA +void pin_mux_usb(void) +{ + colibri_t20_common_pin_mux_usb(); + + /* USB 1 aka Tegra USB port 3 VBus*/ + pinmux_tristate_disable(PINGRP_SPIG); +} +#endif + +#ifdef CONFIG_TEGRA_MMC +int board_mmc_init(bd_t *bd) +{ + funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT); + pinmux_tristate_disable(PINGRP_GMB); + + tegra_mmc_init(0, 4, -1, GPIO_PC7); + + return 0; +} +#endif diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts new file mode 100644 index 0000000000..c29b43a0ef --- /dev/null +++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ ARCH_CPU_DTS + +/ { + model = "Toradex Colibri T20"; + compatible = "toradex,t20", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + usb1 = "/usb@c5000000"; + usb2 = "/usb@c5004000"; + }; + + usb@c5000000 { + dr_mode = "otg"; + }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */ + nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */ + }; + + usb@c5008000 { + nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */ + }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */ + nvidia,width = <8>; + nvidia,timing = <15 100 25 80 25 10 15 10 100>; + + nand@0 { + reg = <0>; + compatible = "nand-flash"; + }; + }; +}; diff --git a/boards.cfg b/boards.cfg index 4c63789041..c45556e8fd 100644 --- a/boards.cfg +++ b/boards.cfg @@ -278,6 +278,7 @@ harmony arm armv7:arm720t harmony nvidia seaboard arm armv7:arm720t seaboard nvidia tegra20 ventana arm armv7:arm720t ventana nvidia tegra20 whistler arm armv7:arm720t whistler nvidia tegra20 +colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20 u8500_href arm armv7 u8500 st-ericsson u8500 snowball arm armv7 snowball st-ericsson u8500 kzm9g arm armv7 kzm9g kmc rmobile diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h new file mode 100644 index 0000000000..0e5f281b25 --- /dev/null +++ b/include/configs/colibri_t20_iris.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "tegra20-common.h" + +/* Enable FDT support */ +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +/* High-level configuration options */ +#define V_PROMPT "Tegra20 (Colibri) # " +#define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris" + +/* Board-specific serial config */ +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_TEGRA_UARTA_SDIO1 +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE + +#define CONFIG_BOARD_EARLY_INIT_F + +/* SD/MMC support */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* File system support */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT + +/* USB host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_ULPI +#define CONFIG_USB_ULPI_VIEWPORT +#define CONFIG_USB_STORAGE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING + +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_2M) +#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */ +#define CONFIG_ENV_SIZE (SZ_64K) + +/* Debug commands */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CACHE + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ -- cgit v1.2.1 From 7f1b767aea949d954e75fa635968a9d315d2e7ff Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 20 Sep 2012 09:29:03 +0000 Subject: ARM: tegra: define CONFIG_SYS_BOOTMAPSZ This define indicates the size of the memory region where it is safe to place data passed to the Linux kernel (ATAGs, DTB, initrd). The value needs to be: a) Less than or equal to RAM size. b) Small enough that the area is not within the kernel's highmem region, since the kernel cannot access ATAGs/DTB/initrd from highmem. c) Large enough to hold the kernel+DTB+initrd. 256M seems large enough for (c) in most circumstances, and small enough to satisfy (a) and (b) across any possible Tegra board. Note that the user can override this value via environment variable "bootm_mapsize" if needed. The advantage of defining BOOTMAPSZ is that we no longer need to define variable fdt_high in the default environment. Previously, we defined this to prevent the DTB from being relocated to the very end of RAM, which on most Tegra systems is within highmem, and hence which would cause boot failures. A user can still define this variable themselves if they want the FDT to be either left in-place wherever loaded, or copied to some other specific location. Similarly, there should no longer be a strict requirement for the user to define initrd_high if using an initrd. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- include/configs/tegra-common-post.h | 1 - include/configs/tegra20-common.h | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 9698c23dad..5d1d3ddcb7 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -143,7 +143,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ "fdt_load=0x01000000\0" \ - "fdt_high=01100000\0" \ BOOTCMDS_COMMON /* overrides for SPL build here */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index dc7444d1cc..70c5cfbba8 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -171,6 +171,8 @@ #define CONFIG_SYS_TEXT_BASE 0x0010c000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ + #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ -- cgit v1.2.1 From 938176a48274361c0b86b237ff6c0953a08233b3 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 2 Oct 2012 09:26:51 +0000 Subject: ARM: tegra: use standard variables to define load addresses Currently, Tegra's default environment uses non-standard variables to define where boot scripts should load the kernel, FDT, and initrd. This change both changes the variable names to match those described in U-Boot's README, and shuffles their values around a little so that the values make a little more sense; see comments in the patch for rationale behind the values chosen. Note that this patch does remove the old non-standard variable "fdt_load" from the default environment, so this patch requires people to change their boot scripts. Signed-off-by: Stephen Warren Acked-by: Simon Glass Signed-off-by: Tom Warren --- include/configs/tegra-common-post.h | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 5d1d3ddcb7..6835155d11 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -95,8 +95,6 @@ #endif #define BOOTCMDS_COMMON \ - "scriptaddr=0x400000\0" \ - \ "rootpart=1\0" \ \ "script_boot=" \ @@ -140,9 +138,36 @@ #endif +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x10000000\0" \ + "kernel_addr_r=0x01000000\0" \ + "fdt_addr_r=0x02000000\0" \ + "ramdisk_addr_r=0x02100000\0" \ + #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ - "fdt_load=0x01000000\0" \ + MEM_LAYOUT_ENV_SETTINGS \ BOOTCMDS_COMMON /* overrides for SPL build here */ -- cgit v1.2.1 From 699c40e8789cfbb5c3ca4ef2849a4bd051ff79bb Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 12 Oct 2012 09:45:48 +0000 Subject: ARM: tegra: Harmony: enable ULPI USB port The ULPI port is routed onto pins on the mini PCI Express connector. A standard breakout board may be used to access the port. * Add required DT entries to configure the ULPI port. * Setup up the ULPI pinmux in the board code. * Enable multiple USB controller and ULPI support in the board config. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- board/nvidia/dts/tegra20-harmony.dts | 3 ++- board/nvidia/harmony/harmony.c | 9 +++++++++ include/configs/harmony.h | 3 +++ 3 files changed, 14 insertions(+), 1 deletion(-) diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts index ca5facb7fe..5645a8d477 100644 --- a/board/nvidia/dts/tegra20-harmony.dts +++ b/board/nvidia/dts/tegra20-harmony.dts @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + usb1 = "/usb@c5004000"; }; memory { @@ -52,7 +53,7 @@ }; usb@c5004000 { - status = "disabled"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ }; nand-controller@70008000 { diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index 32ed9bb7d1..c7590ac6cf 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -75,3 +75,12 @@ int board_mmc_init(bd_t *bd) return 0; } #endif + +void pin_mux_usb(void) +{ + funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI); + pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4); + pinmux_tristate_disable(PINGRP_CDEV2); + /* USB2 PHY reset GPIO */ + pinmux_tristate_disable(PINGRP_UAC); +} diff --git a/include/configs/harmony.h b/include/configs/harmony.h index d582ae1ab6..040bfe48eb 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -72,8 +72,11 @@ #define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sector size */ /* USB Host support */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_ULPI +#define CONFIG_USB_ULPI_VIEWPORT #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB -- cgit v1.2.1 From e73c7cdd1ea152f35f6cf2bc850362cd859f36b6 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 12 Oct 2012 09:45:49 +0000 Subject: ARM: tegra: Seaboard: enable multiple USB ports The device tree already contains the required configuration for both the USB1 and USB3 ports. Enable the required configuration options to enable both these ports, which in turn allows the USB1 port to be used. Note that on a true Seaboard, this port is typically used as a device port hosting Tegra's USB recovery protocol. However, on the Springbank derivative, this port is the only external USB port, so we enable it as a host port so that USB peripherals may be used. Enabling this port in U-Boot as a host port doesn't prevent the port from reverting to a device port when the CPU is reset into recovery mode. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- include/configs/seaboard.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index 0727a4c6f8..74d3b94887 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -81,6 +81,7 @@ #define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE -- cgit v1.2.1 From 56f42f85f5a14040fb0e74fd6cad3910643830d6 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 12 Oct 2012 09:45:50 +0000 Subject: ARM: tegra: Whistler: remove unused USB alias Port USB1 on Whistler is intended as a device port for USB recovery. Whistler's DT currently contains an alias for this USB port, even though Whistler's config doesn't enable multiple USB controllers, so the alias is unused. Remove the unused alias for consistency for now. Similar, explicitly disable the port in the device tree too. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- board/nvidia/dts/tegra20-whistler.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts index 38599bd67d..f830cf3995 100644 --- a/board/nvidia/dts/tegra20-whistler.dts +++ b/board/nvidia/dts/tegra20-whistler.dts @@ -9,7 +9,6 @@ aliases { i2c0 = "/i2c@7000d000"; usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; }; memory { @@ -61,6 +60,10 @@ }; }; + usb@c5000000 { + status = "disabled"; + }; + usb@c5004000 { status = "disabled"; }; -- cgit v1.2.1 From a833b95039a08cd52980f95564b567c8b3138cfe Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Sun, 7 Oct 2012 11:29:38 +0000 Subject: tegra: nand: make ONFI detection work Add the missing bits to the Tegra NAND driver to make ONFI detection work properly. Also add it to the Tegra default config, as it seems to be a reasonable thing to have it available on all boards that use any kind of NAND. Signed-off-by: Lucas Stach Acked-by: Scott Wood Signed-off-by: Tom Warren --- drivers/mtd/nand/tegra_nand.c | 36 ++++++++++++++++++++++++++++++++++++ include/configs/tegra20-common.h | 1 + 2 files changed, 37 insertions(+) diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c index 5408c51ffb..4d94cc6f56 100644 --- a/drivers/mtd/nand/tegra_nand.c +++ b/drivers/mtd/nand/tegra_nand.c @@ -218,6 +218,34 @@ static uint8_t read_byte(struct mtd_info *mtd) return (uint8_t)dword_read; } +/** + * Read len bytes from the chip into a buffer + * + * @param mtd MTD device structure + * @param buf buffer to store data to + * @param len number of bytes to read + * + * Read function for 8bit bus-width + */ +static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i, s; + unsigned int reg; + struct nand_chip *chip = mtd->priv; + struct nand_drv *info = (struct nand_drv *)chip->priv; + + for (i = 0; i < len; i += 4) { + s = (len - i) > 4 ? 4 : len - i; + writel(CMD_PIO | CMD_RX | CMD_A_VALID | CMD_CE0 | + ((s - 1) << CMD_TRANS_SIZE_SHIFT) | CMD_GO, + &info->reg->command); + if (!nand_waitfor_cmd_completion(info->reg)) + puts("Command timeout during read_buf\n"); + reg = readl(&info->reg->resp); + memcpy(buf + i, ®, s); + } +} + /** * Check NAND status to see if it is ready or not * @@ -317,6 +345,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, switch (command) { case NAND_CMD_READID: writel(NAND_CMD_READID, &info->reg->cmd_reg1); + writel(column & 0xFF, &info->reg->addr_reg1); writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_PIO | CMD_RX | ((4 - 1) << CMD_TRANS_SIZE_SHIFT) @@ -324,6 +353,12 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, &info->reg->command); info->pio_byte_index = 0; break; + case NAND_CMD_PARAM: + writel(NAND_CMD_PARAM, &info->reg->cmd_reg1); + writel(column & 0xFF, &info->reg->addr_reg1); + writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_CE0, + &info->reg->command); + break; case NAND_CMD_READ0: writel(NAND_CMD_READ0, &info->reg->cmd_reg1); writel(NAND_CMD_READSTART, &info->reg->cmd_reg2); @@ -976,6 +1011,7 @@ int tegra_nand_init(struct nand_chip *nand, int devnum) nand->options = LP_OPTIONS; nand->cmdfunc = nand_command; nand->read_byte = read_byte; + nand->read_buf = read_buf; nand->ecc.read_page = nand_read_page_hwecc; nand->ecc.write_page = nand_write_page_hwecc; nand->ecc.read_page_raw = nand_read_page_raw; diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 70c5cfbba8..272c46e06b 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -200,5 +200,6 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" #define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_SYS_NAND_ONFI_DETECTION #endif /* __TEGRA20_COMMON_H */ -- cgit v1.2.1 From 2b7818d49f00ec185eb97650fc1b306c0c6e4565 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 22 Oct 2012 06:19:33 +0000 Subject: ARM: enhance u-boot.lds to detect over-sized SPL Add an ASSERT() to u-boot.lds to detect an SPL that doesn't fit within SPL_TEXT_BASE..SPL_MAX_SIZE. Different .lds files implement this check in two possible ways: 1) An ASSERT() like this 2) Defining a MEMORY region of size SPL_MAX_SIZE, and re-directing all linker output into that region. Since u-boot.lds is used for both SPL and main U-Boot, this would entail only sometimes defining a MEMORY region, and only sometimes performing that redirection, and hence option (1) was deemed much simpler, and hence implemented. Note that this causes build failures at least for NVIDIA Tegra Seaboard and Ventana. However, these are legitimate; the SPL doesn't fit within the required space, and this does cause runtime issues. Signed-off-by: Stephen Warren Acked-by: Simon Glass Acked-by: Allen Martin Acked-by: Tom Rini Tested-by: Simon Glass Signed-off-by: Tom Warren --- arch/arm/cpu/u-boot.lds | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index 1996b97536..e6b202bd14 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -94,3 +94,7 @@ SECTIONS /DISCARD/ : { *(.interp*) } /DISCARD/ : { *(.gnu*) } } + +#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE) +ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big"); +#endif -- cgit v1.2.1 From 644a69ec85a73b4d24c3a7b0369da76e2c336bce Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 22 Oct 2012 06:19:34 +0000 Subject: ARM: tegra: derive CONFIG_SPL_MAX_SIZE instead of hard-coding it For Tegra, the SPL and main U-Boot are concatenated together to form a single memory image. Hence, the maximum SPL size is the different in TEXT_BASE for SPL and main U-Boot. Instead of manually calculating SPL_MAX_SIZE based on those two TEXT_BASE, which can lead to errors if one TEXT_BASE is changed without updating SPL_MAX_SIZE, simply perform the calculation automatically. Signed-off-by: Stephen Warren Acked-by: Simon Glass Acked-by: Allen Martin Tested-by: Simon Glass Signed-off-by: Tom Warren --- include/configs/tegra20-common.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 272c46e06b..5b048e0094 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -188,7 +188,8 @@ #define CONFIG_SPL #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x00108000 -#define CONFIG_SPL_MAX_SIZE 0x00004000 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \ + CONFIG_SPL_TEXT_BASE) #define CONFIG_SYS_SPL_MALLOC_START 0x00090000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 #define CONFIG_SPL_STACK 0x000ffffc -- cgit v1.2.1 From da1f735272aaccf201b7d289c86fe8c6ff848f4f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 22 Oct 2012 06:19:35 +0000 Subject: ARM: tegra: select between Seaboard/Ventana at compile time Seaboard and Ventana are very similar boards, and so share the seaboard.c board file. The one difference needed so far is detected at run-time by calling machine_is_ventana(). This bloats the Ventana build with code that is never used. Switch to detecting Ventana at compile time to remove bloat. This shaves ~5K off the SPL size on Ventana, and makes the SPL fit within the max size. Signed-off-by: Stephen Warren Acked-by: Simon Glass Tested-by: Simon Glass Signed-off-by: Tom Warren --- board/nvidia/seaboard/seaboard.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index 4e8a183b8b..ea431e9f62 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -34,7 +34,7 @@ #endif /* TODO: Remove this code when the SPI switch is working */ -#ifndef CONFIG_SPI_UART_SWITCH +#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA) /* * Routine: gpio_config_uart_seaboard * Description: Force GPIO_PI3 low on Seaboard so UART4 works. @@ -48,8 +48,6 @@ static void gpio_config_uart_seaboard(void) void gpio_early_init_uart(void) { - if (machine_is_ventana()) - return; gpio_config_uart_seaboard(); } #endif -- cgit v1.2.1 From a2ab6b7d320423ab4d925d75c588c2a13fce61c6 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 22 Oct 2012 06:19:36 +0000 Subject: ARM: tegra: don't request GPIO from Seaboard's SPL Seaboard has a GPIO that switches an external mux between Tegra's debug UART and SPI flash. This is initialized from the SPL so that SPL debug output can be seen. Simplify the code that does this, and don't actually request the GPIO in the SPL; just program it. This saves ~4.5K from the size of the SPL, mostly BSS due to the large gpio_names[] table that is no longer required. This makes Seaboard's SPL fit within the current max size. Signed-off-by: Stephen Warren Acked-by: Simon Glass Acked-by: Allen Martin Tested-by: Simon Glass Signed-off-by: Tom Warren --- board/nvidia/seaboard/seaboard.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index ea431e9f62..c412c077da 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -35,21 +36,14 @@ /* TODO: Remove this code when the SPI switch is working */ #if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA) -/* - * Routine: gpio_config_uart_seaboard - * Description: Force GPIO_PI3 low on Seaboard so UART4 works. - */ -static void gpio_config_uart_seaboard(void) +void gpio_early_init_uart(void) { /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ +#ifndef CONFIG_SPL_BUILD gpio_request(GPIO_PI3, NULL); +#endif gpio_direction_output(GPIO_PI3, 0); } - -void gpio_early_init_uart(void) -{ - gpio_config_uart_seaboard(); -} #endif #ifdef CONFIG_TEGRA_MMC -- cgit v1.2.1 From a759f1e0db7be05ab562e060cf024af262920426 Mon Sep 17 00:00:00 2001 From: Allen Martin Date: Fri, 19 Oct 2012 21:08:22 +0000 Subject: SPL: make jump_to_image_no_args a weak symbol Change jump_to_image_no_args() to a weak symbol to allow override by SoC specific code. This is required by tegra because the SPL runs on a different CPU from the image it is loading, so tegra specific initialization is required to start the host CPU. Pass in spl_image as a parameter for the same reason. Signed-off-by: Allen Martin Acked-by: Tom Rini Acked-by: Simon Glass Tested-by: Simon Glass Signed-off-by: Tom Warren --- common/spl/spl.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/common/spl/spl.c b/common/spl/spl.c index 0d829c0f12..f068abd8f8 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -113,13 +113,13 @@ void spl_parse_image_header(const struct image_header *header) } } -static void __noreturn jump_to_image_no_args(void) +__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { typedef void __noreturn (*image_entry_noargs_t)(u32 *); image_entry_noargs_t image_entry = - (image_entry_noargs_t) spl_image.entry_point; + (image_entry_noargs_t) spl_image->entry_point; - debug("image entry point: 0x%X\n", spl_image.entry_point); + debug("image entry point: 0x%X\n", spl_image->entry_point); /* Pass the saved boot_params from rom code */ #if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU) image_entry = (image_entry_noargs_t)0x80100000; @@ -223,7 +223,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) default: debug("Unsupported OS image.. Jumping nevertheless..\n"); } - jump_to_image_no_args(); + jump_to_image_no_args(&spl_image); } /* -- cgit v1.2.1 From b2f9893826c48f2653d4a1ffaff8623fdec22303 Mon Sep 17 00:00:00 2001 From: Allen Martin Date: Fri, 19 Oct 2012 21:08:23 +0000 Subject: tegra: move to common SPL framework Change tegra SPL to use common SPL framework. Any tegra specific initialization is now done in spl_board_init() instead of board_init_f()/board_init_r(). Only one SPL boot target is supported on tegra, which is boot to RAM image. jump_to_image_no_args() must be overridden on tegra so the host CPU can be initialized. Signed-off-by: Allen Martin Acked-by: Stephen Warren Tested-by: Stephen Warren Tested-by: Lucas Stach Acked-by: Simon Glass Tested-by: Simon Glass Signed-off-by: Tom Warren --- arch/arm/cpu/arm720t/tegra-common/spl.c | 91 +++++---------------------------- arch/arm/include/asm/arch-tegra20/spl.h | 28 ++++++++++ include/configs/tegra20-common.h | 4 ++ 3 files changed, 46 insertions(+), 77 deletions(-) create mode 100644 arch/arm/include/asm/arch-tegra20/spl.h diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c index 0d37ce83c8..c280ab7d0f 100644 --- a/arch/arm/cpu/arm720t/tegra-common/spl.c +++ b/arch/arm/cpu/arm720t/tegra-common/spl.c @@ -23,105 +23,42 @@ * MA 02111-1307 USA */ #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include "cpu.h" +#include #include #include #include #include #include -#include -#include -#include -#include +#include -DECLARE_GLOBAL_DATA_PTR; -/* Define global data structure pointer to it*/ -static gd_t gdata __attribute__ ((section(".data"))); -static bd_t bdata __attribute__ ((section(".data"))); - -inline void hang(void) +void spl_board_init(void) { - puts("### ERROR ### Please RESET the board ###\n"); - for (;;) - ; -} + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + + /* enable JTAG */ + writel(0xC0, &pmt->pmt_cfg_ctl); -void board_init_f(ulong dummy) -{ board_init_uart_f(); /* Initialize periph GPIOs */ gpio_early_init_uart(); - /* - * We call relocate_code() with relocation target same as the - * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting - * skipped. Instead, only .bss initialization will happen. That's - * all we need - */ - debug(">>board_init_f()\n"); - relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE); + clock_early_init(); + preloader_console_init(); } -/* This requires UART clocks to be enabled */ -static void preloader_console_init(void) +u32 spl_boot_device(void) { - const char *u_boot_rev = U_BOOT_VERSION; - - gd = &gdata; - gd->bd = &bdata; - gd->flags |= GD_FLG_RELOC; - gd->baudrate = CONFIG_BAUDRATE; - - serial_init(); /* serial communications setup */ - - gd->have_console = 1; - - /* Avoid a second "U-Boot" coming from this string */ - u_boot_rev = &u_boot_rev[7]; - - printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE, - U_BOOT_TIME); + return BOOT_DEVICE_RAM; } -void board_init_r(gd_t *id, ulong dummy) +void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { - struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; - - /* enable JTAG */ - writel(0xC0, &pmt->pmt_cfg_ctl); - - debug(">>spl:board_init_r()\n"); - - mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, - CONFIG_SYS_SPL_MALLOC_SIZE); - -#ifdef CONFIG_SPL_BOARD_INIT - spl_board_init(); -#endif + debug("image entry point: 0x%X\n", spl_image->entry_point); - clock_early_init(); - serial_init(); - preloader_console_init(); - - start_cpu((u32)CONFIG_SYS_TEXT_BASE); + start_cpu((u32)spl_image->entry_point); halt_avp(); - /* not reached */ -} - -int board_usb_init(const void *blob) -{ - return 0; } diff --git a/arch/arm/include/asm/arch-tegra20/spl.h b/arch/arm/include/asm/arch-tegra20/spl.h new file mode 100644 index 0000000000..5e453c5cc7 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/spl.h @@ -0,0 +1,28 @@ +/* + * (C) Copyright 2012 + * NVIDIA Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_ARCH_SPL_H_ + +#define BOOT_DEVICE_RAM 1 + +#endif diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 5b048e0094..15bd9bb146 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -169,6 +169,7 @@ #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_TEXT_BASE 0x0010c000 +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ @@ -186,6 +187,9 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_RAM_DEVICE +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x00108000 #define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \ -- cgit v1.2.1 From ee2e185f62d7b9962fa295acbb55688fbace4ad4 Mon Sep 17 00:00:00 2001 From: Allen Martin Date: Fri, 19 Oct 2012 21:18:03 +0000 Subject: tegra20: initialize variable to avoid compiler warning Initialize this variable to avoid a compiler warning about possible use of uninitialized variable with gcc 4.4.6. Signed-off-by: Allen Martin Acked-by: Stephen Warren Acked-by: Simon Glass Tested-by: Simon Glass Signed-off-by: Tom Warren --- arch/arm/cpu/tegra20-common/emc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/tegra20-common/emc.c b/arch/arm/cpu/tegra20-common/emc.c index 97420d7066..90edf00a5e 100644 --- a/arch/arm/cpu/tegra20-common/emc.c +++ b/arch/arm/cpu/tegra20-common/emc.c @@ -257,7 +257,7 @@ static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp, int tegra_set_emc(const void *blob, unsigned rate) { struct emc_ctlr *emc; - const u32 *table; + const u32 *table = NULL; int err, i; err = decode_emc(blob, rate, &emc, &table); -- cgit v1.2.1 From e4ec9346735fdccce4d9b75a5896affe224a38be Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 16 Oct 2012 11:50:07 +0000 Subject: ARM: tegra: combine duplicate Makefile rules The rules to generate u-boot-{no,}dtb-tegra.bin were almost identical. Combine them into a single paremeterized rule. This will allow the next patch to edit a single rule, rather than being cut/paste twice. Signed-off-by: Stephen Warren Acked-by: Simon Glass Signed-off-by: Tom Warren --- Makefile | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/Makefile b/Makefile index d385467e8e..216ad02e05 100644 --- a/Makefile +++ b/Makefile @@ -515,17 +515,18 @@ $(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin ifeq ($(SOC),tegra20) ifeq ($(CONFIG_OF_SEPARATE),y) -$(obj)u-boot-dtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)u-boot.dtb - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin - cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(obj)u-boot.dtb > $@ - rm $(obj)spl/u-boot-spl-pad.bin +nodtb=dtb +dtbfile=$(obj)u-boot.dtb else -$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin +nodtb=nodtb +dtbfile= +endif + +$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile) $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin - cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ + cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@ rm $(obj)spl/u-boot-spl-pad.bin endif -endif ifeq ($(CONFIG_SANDBOX),y) GEN_UBOOT = \ -- cgit v1.2.1 From 0f8998022294ea744b5e2db0faacb96cddba2018 Mon Sep 17 00:00:00 2001 From: Allen Martin Date: Thu, 25 Oct 2012 13:30:14 +0000 Subject: serial: remove calls to serial_assign() Remove calls to serial_assign() that are failing now that it returns a proper error code. This calls were not actually doing anything because they passed the name of a stdio_dev when a serial_device name is exptectd. Signed-off-by: Allen Martin Acked-by: Joe Hershberger Acked-by: Marek Vasut Acked-by: Simon Glass Tested-by: Simon Glass Tested-by: Stephen Warren Signed-off-by: Tom Warren --- common/cmd_nvedit.c | 3 --- common/iomux.c | 10 ---------- 2 files changed, 13 deletions(-) diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 1f9c674260..68c38f4e5c 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -238,9 +238,6 @@ int env_check_apply(const char *name, const char *oldval, /* Try assigning specified device */ if (console_assign(console, newval) < 0) return 1; - - if (serial_assign(newval) < 0) - return 1; #endif /* CONFIG_CONSOLE_MUX */ } diff --git a/common/iomux.c b/common/iomux.c index dbc231250c..6a757041f6 100644 --- a/common/iomux.c +++ b/common/iomux.c @@ -135,16 +135,6 @@ int iomux_doenv(const int console, const char *arg) */ if (console_assign(console, start[j]) < 0) continue; - /* - * This was taken from common/cmd_nvedit.c. - * This will never work because serial_assign() returns - * 1 upon error, not -1. - * This would almost always return an error anyway because - * serial_assign() expects the name of a serial device, like - * serial_smc, but the user generally only wants to set serial. - */ - if (serial_assign(start[j]) < 0) - continue; cons_set[cs_idx++] = dev; } free(console_args); -- cgit v1.2.1 From d598e0fe739e5a75db74cc144beabd09e3c51433 Mon Sep 17 00:00:00 2001 From: Allen Martin Date: Mon, 29 Oct 2012 10:47:43 +0000 Subject: arm720t: add back common.h include Add back common.h header that was removed in previous patch so that CONFIG_TEGRA can be evaluated correctly. Signed-off-by: Allen Martin Signed-off-by: Tom Warren --- arch/arm/cpu/arm720t/interrupts.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index 8e763b7788..623a24b651 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -26,6 +26,8 @@ * MA 02111-1307 USA */ +#include + #ifdef CONFIG_USE_IRQ void do_irq (struct pt_regs *pt_regs) { -- cgit v1.2.1 From 89e6f13849fa583a475aa2bd733021d850098bf4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Fri, 19 Oct 2012 02:00:04 +0000 Subject: arm bootm: Allow to pass board specified atags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Board can implement function setup_board_tags which is used for adding atags Signed-off-by: Pali Rohár --- arch/arm/include/asm/setup.h | 5 +++++ arch/arm/lib/bootm.c | 4 ++++ 2 files changed, 9 insertions(+) diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 89df4dc708..78a7facfc3 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -267,3 +267,8 @@ struct meminfo { extern struct meminfo meminfo; #endif + +/* + * Board specified tags + */ +void setup_board_tags(struct tag **in_params); diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 37476cc90d..1bd2730856 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -34,6 +34,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -269,6 +270,8 @@ static int create_fdt(bootm_headers_t *images) } #endif +__weak void setup_board_tags(struct tag **in_params) {} + /* Subcommand: PREP */ static void boot_prep_linux(bootm_headers_t *images) { @@ -310,6 +313,7 @@ static void boot_prep_linux(bootm_headers_t *images) setup_initrd_tag(gd->bd, images->rd_start, images->rd_end); #endif + setup_board_tags(¶ms); setup_end_tag(gd->bd); #else /* all tags */ printf("FDT and ATAGS support not compiled in - hanging\n"); -- cgit v1.2.1 From 318e70e2447d2706b27e7d3b66a6dbc54ec01e7d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Fri, 19 Oct 2012 02:00:06 +0000 Subject: Add power bus message definitions in twl4030.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * Code copied from linux kernel 3.0.0 from file include/linux/i2c/twl.h * commit 6523b148b44be38d89c2ee9865d34da30d9f5f1c Signed-off-by: Pali Rohár --- include/twl4030.h | 98 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) diff --git a/include/twl4030.h b/include/twl4030.h index 9cd32ab45a..0c17f5929b 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -151,6 +151,103 @@ #define TWL4030_PM_MASTER_SW_EVENTS_DEVSLP (1 << 1) #define TWL4030_PM_MASTER_SW_EVENTS_DEVOFF (1 << 0) +/* Power bus message definitions */ + +/* The TWL4030/5030 splits its power-management resources (the various + * regulators, clock and reset lines) into 3 processor groups - P1, P2 and + * P3. These groups can then be configured to transition between sleep, wait-on + * and active states by sending messages to the power bus. See Section 5.4.2 + * Power Resources of TWL4030 TRM + */ + +/* Processor groups */ +#define DEV_GRP_NULL 0x0 +#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ +#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ +#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ + +/* Resource groups */ +#define RES_GRP_RES 0x0 /* Reserved */ +#define RES_GRP_PP 0x1 /* Power providers */ +#define RES_GRP_RC 0x2 /* Reset and control */ +#define RES_GRP_PP_RC 0x3 +#define RES_GRP_PR 0x4 /* Power references */ +#define RES_GRP_PP_PR 0x5 +#define RES_GRP_RC_PR 0x6 +#define RES_GRP_ALL 0x7 /* All resource groups */ + +#define RES_TYPE2_R0 0x0 + +#define RES_TYPE_ALL 0x7 + +/* Resource states */ +#define RES_STATE_WRST 0xF +#define RES_STATE_ACTIVE 0xE +#define RES_STATE_SLEEP 0x8 +#define RES_STATE_OFF 0x0 + +/* Power resources */ + +/* Power providers */ +#define RES_VAUX1 1 +#define RES_VAUX2 2 +#define RES_VAUX3 3 +#define RES_VAUX4 4 +#define RES_VMMC1 5 +#define RES_VMMC2 6 +#define RES_VPLL1 7 +#define RES_VPLL2 8 +#define RES_VSIM 9 +#define RES_VDAC 10 +#define RES_VINTANA1 11 +#define RES_VINTANA2 12 +#define RES_VINTDIG 13 +#define RES_VIO 14 +#define RES_VDD1 15 +#define RES_VDD2 16 +#define RES_VUSB_1V5 17 +#define RES_VUSB_1V8 18 +#define RES_VUSB_3V1 19 +#define RES_VUSBCP 20 +#define RES_REGEN 21 +/* Reset and control */ +#define RES_NRES_PWRON 22 +#define RES_CLKEN 23 +#define RES_SYSEN 24 +#define RES_HFCLKOUT 25 +#define RES_32KCLKOUT 26 +#define RES_RESET 27 +/* Power Reference */ +#define RES_Main_Ref 28 + +#define TOTAL_RESOURCES 28 +/* + * Power Bus Message Format ... these can be sent individually by Linux, + * but are usually part of downloaded scripts that are run when various + * power events are triggered. + * + * Broadcast Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4] + * RES_STATE[3:0] + * + * Singular Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] + */ + +#define MSG_BROADCAST(devgrp, grp, type, type2, state) \ + ((devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \ + | (type) << 4 | (state)) + +#define MSG_SINGULAR(devgrp, id, state) \ + ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state)) + +#define MSG_BROADCAST_ALL(devgrp, state) \ + ((devgrp) << 5 | (state)) + +#define MSG_BROADCAST_REF MSG_BROADCAST_ALL +#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL +#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL + /* Power Managment Receiver */ #define TWL4030_PM_RECEIVER_SC_CONFIG 0x5B #define TWL4030_PM_RECEIVER_SC_DETECT1 0x5C @@ -311,6 +408,7 @@ #define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_32 0x03 +#define TWL4030_PM_RECEIVER_VSIM_VSEL_18 0x03 /* Device Selection in PM Receiver Module */ #define TWL4030_PM_RECEIVER_DEV_GRP_P1 0x20 -- cgit v1.2.1 From 33a35bbbe09a9b63b46e86a97d5dfbdae5481401 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Fri, 19 Oct 2012 13:30:09 +0000 Subject: cfb_console: Add support for some ANSI terminal escape codes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add optional support for some ANSI escape sequences to the cfb_console driver. Define CONFIG_CFB_CONSOLE_ANSI to enable cursor moving, color reverting and clearing the cfb console via ANSI escape codes. Signed-off-by: Pali Rohár Signed-off-by: Anatolij Gustschin --- README | 4 + drivers/video/cfb_console.c | 328 ++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 323 insertions(+), 9 deletions(-) diff --git a/README b/README index df4aed14e4..61e2e1ffc7 100644 --- a/README +++ b/README @@ -655,6 +655,10 @@ The following options need to be configured: additional board info beside the logo + When CONFIG_CFB_CONSOLE_ANSI is defined, console will support + a limited number of ANSI escape sequences (cursor control, + erase functions and limited graphics rendition control). + When CONFIG_CFB_CONSOLE is defined, video console is default i/o. Serial console can be forced with environment 'console=serial'. diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 9f7794fe53..9c67b63bf4 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -385,6 +385,13 @@ static u32 eorx, fgx, bgx; /* color pats */ static int cfb_do_flush_cache; +#ifdef CONFIG_CFB_CONSOLE_ANSI +static char ansi_buf[10]; +static int ansi_buf_size; +static int ansi_colors_need_revert; +static int ansi_cursor_hidden; +#endif + static const int video_font_draw_table8[] = { 0x00000000, 0x000000ff, 0x0000ff00, 0x0000ffff, 0x00ff0000, 0x00ff00ff, 0x00ffff00, 0x00ffffff, @@ -768,9 +775,97 @@ static void console_back(void) } } -static void console_newline(void) +#ifdef CONFIG_CFB_CONSOLE_ANSI + +static void console_clear(void) +{ +#ifdef VIDEO_HW_RECTFILL + video_hw_rectfill(VIDEO_PIXEL_SIZE, /* bytes per pixel */ + 0, /* dest pos x */ + video_logo_height, /* dest pos y */ + VIDEO_VISIBLE_COLS, /* frame width */ + VIDEO_VISIBLE_ROWS, /* frame height */ + bgx /* fill color */ + ); +#else + memsetl(CONSOLE_ROW_FIRST, CONSOLE_SIZE, bgx); +#endif +} + +static void console_cursor_fix(void) +{ + if (console_row < 0) + console_row = 0; + if (console_row >= CONSOLE_ROWS) + console_row = CONSOLE_ROWS - 1; + if (console_col < 0) + console_col = 0; + if (console_col >= CONSOLE_COLS) + console_col = CONSOLE_COLS - 1; +} + +static void console_cursor_up(int n) +{ + console_row -= n; + console_cursor_fix(); +} + +static void console_cursor_down(int n) +{ + console_row += n; + console_cursor_fix(); +} + +static void console_cursor_left(int n) +{ + console_col -= n; + console_cursor_fix(); +} + +static void console_cursor_right(int n) +{ + console_col += n; + console_cursor_fix(); +} + +static void console_cursor_set_position(int row, int col) +{ + if (console_row != -1) + console_row = row; + if (console_col != -1) + console_col = col; + console_cursor_fix(); +} + +static void console_previousline(int n) { - console_row++; + /* FIXME: also scroll terminal ? */ + console_row -= n; + console_cursor_fix(); +} + +static void console_swap_colors(void) +{ + eorx = fgx; + fgx = bgx; + bgx = eorx; + eorx = fgx ^ bgx; +} + +static inline int console_cursor_is_visible(void) +{ + return !ansi_cursor_hidden; +} +#else +static inline int console_cursor_is_visible(void) +{ + return 1; +} +#endif + +static void console_newline(int n) +{ + console_row += n; console_col = 0; /* Check if we need to scroll the terminal */ @@ -779,7 +874,7 @@ static void console_newline(void) console_scrollup(); /* Decrement row number */ - console_row--; + console_row = CONSOLE_ROWS - 1; } } @@ -788,11 +883,12 @@ static void console_cr(void) console_col = 0; } -void video_putc(const char c) +static void parse_putc(const char c) { static int nl = 1; - CURSOR_OFF; + if (console_cursor_is_visible()) + CURSOR_OFF; switch (c) { case 13: /* back to first column */ @@ -801,7 +897,7 @@ void video_putc(const char c) case '\n': /* next line */ if (console_col || (!console_col && nl)) - console_newline(); + console_newline(1); nl = 1; break; @@ -810,7 +906,7 @@ void video_putc(const char c) console_col &= ~0x0007; if (console_col >= CONSOLE_COLS) - console_newline(); + console_newline(1); break; case 8: /* backspace */ @@ -827,11 +923,225 @@ void video_putc(const char c) /* check for newline */ if (console_col >= CONSOLE_COLS) { - console_newline(); + console_newline(1); nl = 0; } } - CURSOR_SET; + + if (console_cursor_is_visible()) + CURSOR_SET; +} + +void video_putc(const char c) +{ +#ifdef CONFIG_CFB_CONSOLE_ANSI + int i; + + if (c == 27) { + for (i = 0; i < ansi_buf_size; ++i) + parse_putc(ansi_buf[i]); + ansi_buf[0] = 27; + ansi_buf_size = 1; + return; + } + + if (ansi_buf_size > 0) { + /* + * 0 - ESC + * 1 - [ + * 2 - num1 + * 3 - .. + * 4 - ; + * 5 - num2 + * 6 - .. + * - cchar + */ + int next = 0; + + int flush = 0; + int fail = 0; + + int num1 = 0; + int num2 = 0; + int cchar = 0; + + ansi_buf[ansi_buf_size++] = c; + + if (ansi_buf_size >= sizeof(ansi_buf)) + fail = 1; + + for (i = 0; i < ansi_buf_size; ++i) { + if (fail) + break; + + switch (next) { + case 0: + if (ansi_buf[i] == 27) + next = 1; + else + fail = 1; + break; + + case 1: + if (ansi_buf[i] == '[') + next = 2; + else + fail = 1; + break; + + case 2: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num1 = ansi_buf[i]-'0'; + next = 3; + } else if (ansi_buf[i] != '?') { + --i; + num1 = 1; + next = 4; + } + break; + + case 3: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num1 *= 10; + num1 += ansi_buf[i]-'0'; + } else { + --i; + next = 4; + } + break; + + case 4: + if (ansi_buf[i] != ';') { + --i; + next = 7; + } else + next = 5; + break; + + case 5: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num2 = ansi_buf[i]-'0'; + next = 6; + } else + fail = 1; + break; + + case 6: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num2 *= 10; + num2 += ansi_buf[i]-'0'; + } else { + --i; + next = 7; + } + break; + + case 7: + if ((ansi_buf[i] >= 'A' && ansi_buf[i] <= 'H') + || ansi_buf[i] == 'J' + || ansi_buf[i] == 'K' + || ansi_buf[i] == 'h' + || ansi_buf[i] == 'l' + || ansi_buf[i] == 'm') { + cchar = ansi_buf[i]; + flush = 1; + } else + fail = 1; + break; + } + } + + if (fail) { + for (i = 0; i < ansi_buf_size; ++i) + parse_putc(ansi_buf[i]); + ansi_buf_size = 0; + return; + } + + if (flush) { + if (!ansi_cursor_hidden) + CURSOR_OFF; + ansi_buf_size = 0; + switch (cchar) { + case 'A': + /* move cursor num1 rows up */ + console_cursor_up(num1); + break; + case 'B': + /* move cursor num1 rows down */ + console_cursor_down(num1); + break; + case 'C': + /* move cursor num1 columns forward */ + console_cursor_right(num1); + break; + case 'D': + /* move cursor num1 columns back */ + console_cursor_left(num1); + break; + case 'E': + /* move cursor num1 rows up at begin of row */ + console_previousline(num1); + break; + case 'F': + /* move cursor num1 rows down at begin of row */ + console_newline(num1); + break; + case 'G': + /* move cursor to column num1 */ + console_cursor_set_position(-1, num1-1); + break; + case 'H': + /* move cursor to row num1, column num2 */ + console_cursor_set_position(num1-1, num2-1); + break; + case 'J': + /* clear console and move cursor to 0, 0 */ + console_clear(); + console_cursor_set_position(0, 0); + break; + case 'K': + /* clear line */ + if (num1 == 0) + console_clear_line(console_row, + console_col, + CONSOLE_COLS-1); + else if (num1 == 1) + console_clear_line(console_row, + 0, console_col); + else + console_clear_line(console_row, + 0, CONSOLE_COLS-1); + break; + case 'h': + ansi_cursor_hidden = 0; + break; + case 'l': + ansi_cursor_hidden = 1; + break; + case 'm': + if (num1 == 0) { /* reset swapped colors */ + if (ansi_colors_need_revert) { + console_swap_colors(); + ansi_colors_need_revert = 0; + } + } else if (num1 == 7) { /* once swap colors */ + if (!ansi_colors_need_revert) { + console_swap_colors(); + ansi_colors_need_revert = 1; + } + } + break; + } + if (!ansi_cursor_hidden) + CURSOR_SET; + } + } else { + parse_putc(c); + } +#else + parse_putc(c); +#endif } void video_puts(const char *s) -- cgit v1.2.1 From ed407be53e1e8f0be90d5723ca71ab1c37e2eed8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Mon, 29 Oct 2012 07:54:01 +0000 Subject: New board support: Nokia RX-51 aka N900 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on previous work by: Alistair Buxton Signed-off-by: Pali Rohár Cc: Ивайло Димитров --- MAINTAINERS | 4 + board/nokia/rx51/Makefile | 46 +++ board/nokia/rx51/lowlevel_init.S | 209 ++++++++++++ board/nokia/rx51/rx51.c | 677 +++++++++++++++++++++++++++++++++++++++ board/nokia/rx51/rx51.h | 389 ++++++++++++++++++++++ board/nokia/rx51/tag_omap.h | 311 ++++++++++++++++++ boards.cfg | 1 + doc/README.nokia_rx51 | 104 ++++++ include/configs/nokia_rx51.h | 452 ++++++++++++++++++++++++++ 9 files changed, 2193 insertions(+) create mode 100644 board/nokia/rx51/Makefile create mode 100644 board/nokia/rx51/lowlevel_init.S create mode 100644 board/nokia/rx51/rx51.c create mode 100644 board/nokia/rx51/rx51.h create mode 100644 board/nokia/rx51/tag_omap.h create mode 100644 doc/README.nokia_rx51 create mode 100644 include/configs/nokia_rx51.h diff --git a/MAINTAINERS b/MAINTAINERS index c0fff0e40c..d4c511783f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1013,6 +1013,10 @@ Nobuhiro Iwamatsu armadillo-800eva R8A7740 (RMOBILE SoC) +Pali Rohár + + nokia_rx51 ARM ARMV7 (OMAP34xx SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards: diff --git a/board/nokia/rx51/Makefile b/board/nokia/rx51/Makefile new file mode 100644 index 0000000000..86fb48cc99 --- /dev/null +++ b/board/nokia/rx51/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o +SOBJS-y := lowlevel_init.o + +COBJS := $(sort $(COBJS-y)) +SOBJS := $(sort $(SOBJS-y)) +SRCS := $(COBJS:.o=.c) $(SOBJS:.o=.S) +OBJS := $(addprefix $(obj),$(COBJS)) $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/nokia/rx51/lowlevel_init.S b/board/nokia/rx51/lowlevel_init.S new file mode 100644 index 0000000000..055b1038d1 --- /dev/null +++ b/board/nokia/rx51/lowlevel_init.S @@ -0,0 +1,209 @@ +/* + * (C) Copyright 2011-2012 + * Pali Rohár + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +relocaddr: /* address of this relocaddr section after coping */ + .word . /* address of section (calculated at compile time) */ + +startaddr: /* address of u-boot after copying */ + .word CONFIG_SYS_TEXT_BASE + +kernaddr: /* address of kernel after copying */ + .word KERNEL_ADDRESS + +kernsize: /* maximal size of kernel image */ + .word KERNEL_MAXSIZE + +kernoffs: /* offset of kernel image in loaded u-boot */ + .word KERNEL_OFFSET + +imagesize: /* maximal size of image */ + .word IMAGE_MAXSIZE + +ih_magic: /* IH_MAGIC in big endian from include/image.h */ + .word 0x56190527 + +/* + * Routine: save_boot_params (called after reset from start.S) + * Description: Copy attached kernel to address KERNEL_ADDRESS + * Copy u-boot to address CONFIG_SYS_TEXT_BASE + * Return to copied u-boot address + */ + +.global save_boot_params +save_boot_params: + + +/* Copy valid attached kernel to address KERNEL_ADDRESS */ + +copy_kernel_start: + adr r0, relocaddr /* r0 - address of section relocaddr */ + ldr r1, relocaddr /* r1 - address of relocaddr after relocation */ + cmp r0, r1 + + /* r4 - calculated offset */ + subhi r4, r0, r1 + sublo r4, r1, r0 + + /* r0 - start of kernel before */ + ldr r0, startaddr + addhi r0, r0, r4 + sublo r0, r0, r4 + ldr r1, kernoffs + add r0, r0, r1 + + /* r3 - start of kernel after */ + ldr r3, kernaddr + + /* r2 - end of kernel after */ + ldr r1, kernsize + add r2, r3, r1 + + /* r1 - end of kernel before */ + add r1, r0, r1 + + /* remove header in target kernel */ + mov r5, #0 + str r5, [r3] + + /* check for valid kernel uImage */ + ldr r4, [r0] /* r4 - 4 bytes header of kernel */ + ldr r5, ih_magic /* r5 - IH_MAGIC */ + cmp r4, r5 + bne copy_kernel_end /* skip if invalid image */ + +copy_kernel_loop: + ldmdb r1!, {r3 - r10} + stmdb r2!, {r3 - r10} + cmp r1, r0 + bhi copy_kernel_loop + +copy_kernel_end: + mov r5, #0 + str r5, [r0] /* remove 4 bytes header of kernel */ + + +/* Fix u-boot code */ + +fix_start: + adr r0, relocaddr /* r0 - address of section relocaddr */ + ldr r1, relocaddr /* r1 - address of relocaddr after relocation */ + cmp r0, r1 + + beq copy_uboot_end /* skip if u-boot is on correct address */ + + /* r5 - calculated offset */ + subhi r5, r0, r1 + sublo r5, r1, r0 + + /* r6 - maximal u-boot size */ + ldr r6, imagesize + + /* fix return address */ + subhi lr, lr, r5 + addlo lr, lr, r5 + + /* r1 - start of u-boot after */ + ldr r1, startaddr + + /* r0 - start of u-boot before */ + addhi r0, r1, r5 + sublo r0, r1, r5 + + /* check if we need to move uboot copy code before calling it */ + cmp r5, r6 + bhi copy_uboot_start /* now coping u-boot code directly is safe */ + + +copy_code_start: + /* r0 - start of u-boot before */ + /* r1 - start of u-boot after */ + /* r6 - maximal u-boot size */ + + /* r7 - maximal kernel size */ + ldr r7, kernsize + + /* r4 - end of kernel before */ + add r4, r0, r6 + add r4, r4, r7 + + /* r5 - end of u-boot after */ + ldr r5, startaddr + add r5, r5, r6 + + /* r2 - start of loop code after */ + cmp r4, r5 /* higher address (r4 or r5) */ + movhs r2, r4 + movlo r2, r5 + + /* r3 - end of loop code before */ + adr r3, end + + /* r4 - end of loop code after */ + adr r4, copy_uboot_start + sub r4, r3, r4 + add r4, r2, r4 + +copy_code_loop: + ldmdb r3!, {r7 - r10} + stmdb r4!, {r7 - r10} + cmp r4, r2 + bhi copy_code_loop + +copy_code_end: + mov pc, r2 + + +/* Copy u-boot to address CONFIG_SYS_TEXT_BASE */ + +copy_uboot_start: + /* r0 - start of u-boot before */ + /* r1 - start of u-boot after */ + /* r6 - maximal u-boot size */ + + /* r2 - end of u-boot after */ + add r2, r1, r6 + + /* condition for copying from left to right */ + cmp r0, r1 + addlo r1, r0, r6 /* r1 - end of u-boot before */ + blo copy_uboot_loop_right + +copy_uboot_loop_left: + ldmia r0!, {r3 - r10} + stmia r1!, {r3 - r10} + cmp r1, r2 + blo copy_uboot_loop_left + b copy_uboot_end + +copy_uboot_loop_right: + ldmdb r1!, {r3 - r10} + stmdb r2!, {r3 - r10} + cmp r1, r0 + bhi copy_uboot_loop_right + +copy_uboot_end: + bx lr + +end: diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c new file mode 100644 index 0000000000..b2fe1c531a --- /dev/null +++ b/board/nokia/rx51/rx51.c @@ -0,0 +1,677 @@ +/* + * (C) Copyright 2012 + * Ивайло Димитров + * + * (C) Copyright 2011-2012 + * Pali Rohár + * + * (C) Copyright 2010 + * Alistair Buxton + * + * Derived from Beagle Board and 3430 SDP code: + * (C) Copyright 2004-2008 + * Texas Instruments, + * + * Author : + * Sunil Kumar + * Shashi Ranjan + * + * Richard Woodruff + * Syed Mohammed Khasim + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "rx51.h" +#include "tag_omap.h" + +DECLARE_GLOBAL_DATA_PTR; + +GraphicDevice gdev; + +const omap3_sysinfo sysinfo = { + DDR_STACKED, + "Nokia RX-51", + "OneNAND" +}; + +/* This structure contains default omap tags needed for booting Maemo 5 */ +static struct tag_omap omap[] = { + OMAP_TAG_UART_CONFIG(0x04), + OMAP_TAG_SERIAL_CONSOLE_CONFIG(0x03, 0x01C200), + OMAP_TAG_LCD_CONFIG("acx565akm", "internal", 90, 0x18), + OMAP_TAG_GPIO_SWITCH_CONFIG("cam_focus", 0x44, 0x1, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cam_launch", 0x45, 0x1, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cam_shutter", 0x6e, 0x1, 0x0, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_apeslpx", 0x46, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_bsi", 0x9d, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_en", 0x4a, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst", 0x4b, 0x6, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst_rq", 0x49, 0x6, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_wddis", 0x0d, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("headphone", 0xb1, 0x1, 0x1, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("kb_lock", 0x71, 0x1, 0x0, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("proximity", 0x59, 0x0, 0x0, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("sleep_ind", 0xa2, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("slide", GPIO_SLIDE, 0x0, 0x0, 0x0), + OMAP_TAG_WLAN_CX3110X_CONFIG(0x25, 0xff, 87, 42, -1), + OMAP_TAG_PARTITION_CONFIG(PART1_NAME, PART1_SIZE * PART1_MULL, + PART1_OFFS, PART1_MASK), + OMAP_TAG_PARTITION_CONFIG(PART2_NAME, PART2_SIZE * PART2_MULL, + PART2_OFFS, PART2_MASK), + OMAP_TAG_PARTITION_CONFIG(PART3_NAME, PART3_SIZE * PART3_MULL, + PART3_OFFS, PART3_MASK), + OMAP_TAG_PARTITION_CONFIG(PART4_NAME, PART4_SIZE * PART4_MULL, + PART4_OFFS, PART4_MASK), + OMAP_TAG_PARTITION_CONFIG(PART5_NAME, PART5_SIZE * PART5_MULL, + PART5_OFFS, PART5_MASK), + OMAP_TAG_PARTITION_CONFIG(PART6_NAME, PART6_SIZE * PART6_MULL, + PART6_OFFS, PART6_MASK), + OMAP_TAG_BOOT_REASON_CONFIG("pwr_key"), + OMAP_TAG_VERSION_STR_CONFIG("product", "RX-51"), + OMAP_TAG_VERSION_STR_CONFIG("hw-build", "2101"), + OMAP_TAG_VERSION_STR_CONFIG("nolo", "1.4.14"), + OMAP_TAG_VERSION_STR_CONFIG("boot-mode", "normal"), + { } +}; + +static char *boot_reason_ptr; +static char *hw_build_ptr; +static char *nolo_version_ptr; +static char *boot_mode_ptr; + +/* + * Routine: init_omap_tags + * Description: Initialize pointers to values in tag_omap + */ +static void init_omap_tags(void) +{ + char *component; + char *version; + int i = 0; + while (omap[i].hdr.tag) { + switch (omap[i].hdr.tag) { + case OMAP_TAG_BOOT_REASON: + boot_reason_ptr = omap[i].u.boot_reason.reason_str; + break; + case OMAP_TAG_VERSION_STR: + component = omap[i].u.version.component; + version = omap[i].u.version.version; + if (strcmp(component, "hw-build") == 0) + hw_build_ptr = version; + else if (strcmp(component, "nolo") == 0) + nolo_version_ptr = version; + else if (strcmp(component, "boot-mode") == 0) + boot_mode_ptr = version; + break; + default: + break; + } + i++; + } +} + +static void reuse_omap_atags(struct tag_omap *t) +{ + char *component; + char *version; + while (t->hdr.tag) { + switch (t->hdr.tag) { + case OMAP_TAG_BOOT_REASON: + memset(boot_reason_ptr, 0, 12); + strcpy(boot_reason_ptr, t->u.boot_reason.reason_str); + break; + case OMAP_TAG_VERSION_STR: + component = t->u.version.component; + version = t->u.version.version; + if (strcmp(component, "hw-build") == 0) { + memset(hw_build_ptr, 0, 12); + strcpy(hw_build_ptr, version); + } else if (strcmp(component, "nolo") == 0) { + memset(nolo_version_ptr, 0, 12); + strcpy(nolo_version_ptr, version); + } else if (strcmp(component, "boot-mode") == 0) { + memset(boot_mode_ptr, 0, 12); + strcpy(boot_mode_ptr, version); + } + break; + default: + break; + } + t = tag_omap_next(t); + } +} + +/* + * Routine: reuse_atags + * Description: Reuse atags from previous bootloader. + * Reuse only only HW build, boot reason, boot mode and nolo + */ +static void reuse_atags(void) +{ + struct tag *t = (struct tag *)gd->bd->bi_boot_params; + + /* First tag must be ATAG_CORE */ + if (t->hdr.tag != ATAG_CORE) + return; + + if (!boot_reason_ptr || !hw_build_ptr) + return; + + /* Last tag must be ATAG_NONE */ + while (t->hdr.tag != ATAG_NONE) { + switch (t->hdr.tag) { + case ATAG_REVISION: + memset(hw_build_ptr, 0, 12); + sprintf(hw_build_ptr, "%x", t->u.revision.rev); + break; + case ATAG_BOARD: + reuse_omap_atags((struct tag_omap *)&t->u); + break; + default: + break; + } + t = tag_next(t); + } +} + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + /* in SRAM or SDRAM, finish GPMC */ + gpmc_init(); + /* boot param addr */ + gd->bd->bi_boot_params = OMAP34XX_SDRC_CS0 + 0x100; + return 0; +} + +/* + * Routine: get_board_revision + * Description: Return board revision. + */ +u32 get_board_rev(void) +{ + return simple_strtol(hw_build_ptr, NULL, 16); +} + +/* + * Routine: setup_board_tags + * Description: Append board specific boot tags. + */ +void setup_board_tags(struct tag **in_params) +{ + int setup_console_atag; + char *setup_boot_reason_atag; + char *setup_boot_mode_atag; + char *str; + int i; + int size; + int total_size; + struct tag *params; + struct tag_omap *t; + + params = (struct tag *)gd->bd->bi_boot_params; + + params->u.core.flags = 0x0; + params->u.core.pagesize = 0x1000; + params->u.core.rootdev = 0x0; + + /* append omap atag only if env setup_omap_atag is set to 1 */ + str = getenv("setup_omap_atag"); + if (!str || str[0] != '1') + return; + + str = getenv("setup_console_atag"); + if (str && str[0] == '1') + setup_console_atag = 1; + else + setup_console_atag = 0; + + setup_boot_reason_atag = getenv("setup_boot_reason_atag"); + setup_boot_mode_atag = getenv("setup_boot_mode_atag"); + + params = *in_params; + t = (struct tag_omap *)¶ms->u; + total_size = sizeof(struct tag_header); + + for (i = 0; omap[i].hdr.tag; i++) { + + /* skip serial console tag */ + if (!setup_console_atag && + omap[i].hdr.tag == OMAP_TAG_SERIAL_CONSOLE) + continue; + + size = omap[i].hdr.size + sizeof(struct tag_omap_header); + memcpy(t, &omap[i], size); + + /* set uart tag to 0 - disable serial console */ + if (!setup_console_atag && omap[i].hdr.tag == OMAP_TAG_UART) + t->u.uart.enabled_uarts = 0; + + /* change boot reason */ + if (setup_boot_reason_atag && + omap[i].hdr.tag == OMAP_TAG_BOOT_REASON) { + memset(t->u.boot_reason.reason_str, 0, 12); + strcpy(t->u.boot_reason.reason_str, + setup_boot_reason_atag); + } + + /* change boot mode */ + if (setup_boot_mode_atag && + omap[i].hdr.tag == OMAP_TAG_VERSION_STR && + strcmp(omap[i].u.version.component, "boot-mode") == 0) { + memset(t->u.version.version, 0, 12); + strcpy(t->u.version.version, setup_boot_mode_atag); + } + + total_size += size; + t = tag_omap_next(t); + + } + + params->hdr.tag = ATAG_BOARD; + params->hdr.size = total_size >> 2; + params = tag_next(params); + + *in_params = params; +} + +/* + * Routine: video_hw_init + * Description: Set up the GraphicDevice depending on sys_boot. + */ +void *video_hw_init(void) +{ + /* fill in Graphic Device */ + gdev.frameAdrs = 0x8f9c0000; + gdev.winSizeX = 800; + gdev.winSizeY = 480; + gdev.gdfBytesPP = 2; + gdev.gdfIndex = GDF_16BIT_565RGB; + memset((void *)gdev.frameAdrs, 0, 0xbb800); + return (void *) &gdev; +} + +/* + * Routine: twl4030_regulator_set_mode + * Description: Set twl4030 regulator mode over i2c powerbus. + */ +static void twl4030_regulator_set_mode(u8 id, u8 mode) +{ + u16 msg = MSG_SINGULAR(DEV_GRP_P1, id, mode); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg >> 8, + TWL4030_PM_MASTER_PB_WORD_MSB); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg & 0xff, + TWL4030_PM_MASTER_PB_WORD_LSB); +} + +static void omap3_emu_romcode_call(u32 service_id, u32 *parameters) +{ + u32 i, num_params = *parameters; + u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA; + + /* + * copy the parameters to an un-cached area to avoid coherency + * issues + */ + for (i = 0; i < num_params; i++) { + __raw_writel(*parameters, sram_scratch_space); + parameters++; + sram_scratch_space++; + } + + /* Now make the PPA call */ + do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA); +} + +/* + * Routine: omap3_update_aux_cr_secure_rx51 + * Description: Modify the contents Auxiliary Control Register. + * Parameters: + * set_bits - bits to set in ACR + * clr_bits - bits to clear in ACR + */ +static void omap3_update_aux_cr_secure_rx51(u32 set_bits, u32 clear_bits) +{ + struct emu_hal_params_rx51 emu_romcode_params = { 0, }; + u32 acr; + + /* Read ACR */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + acr &= ~clear_bits; + acr |= set_bits; + + emu_romcode_params.num_params = 2; + emu_romcode_params.param1 = acr; + + omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR, + (u32 *)&emu_romcode_params); +} + +/* + * Routine: misc_init_r + * Description: Configure board specific parts. + */ +int misc_init_r(void) +{ + char buf[12]; + u8 state; + + /* reset lp5523 led */ + i2c_set_bus_num(1); + state = 0xff; + i2c_write(0x32, 0x3d, 1, &state, 1); + i2c_set_bus_num(0); + + /* initialize twl4030 power managment */ + twl4030_power_init(); + + /* set VSIM to 1.8V */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED, + TWL4030_PM_RECEIVER_VSIM_VSEL_18, + TWL4030_PM_RECEIVER_VSIM_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + + /* store I2C access state */ + twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &state, + TWL4030_PM_MASTER_PB_CFG); + + /* enable I2C access to powerbus (needed for twl4030 regulator) */ + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x02, + TWL4030_PM_MASTER_PB_CFG); + + /* set VAUX3, VSIM and VMMC1 state to active - enable eMMC memory */ + twl4030_regulator_set_mode(RES_VAUX3, RES_STATE_ACTIVE); + twl4030_regulator_set_mode(RES_VSIM, RES_STATE_ACTIVE); + twl4030_regulator_set_mode(RES_VMMC1, RES_STATE_ACTIVE); + + /* restore I2C access state */ + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, state, + TWL4030_PM_MASTER_PB_CFG); + + /* set env variable attkernaddr for relocated kernel */ + sprintf(buf, "%#x", KERNEL_ADDRESS); + setenv("attkernaddr", buf); + + /* initialize omap tags */ + init_omap_tags(); + + /* reuse atags from previous bootloader */ + reuse_atags(); + + dieid_num_r(); + print_cpuinfo(); + + /* + * Cortex-A8(r1p0..r1p2) errata 430973 workaround + * Set IBE bit in Auxiliary Control Register + */ + omap3_update_aux_cr_secure_rx51(1 << 6, 0); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_RX51(); +} + +static unsigned long int twl_wd_time; /* last time of watchdog reset */ +static unsigned long int twl_i2c_lock; + +/* + * Routine: hw_watchdog_reset + * Description: Reset timeout of twl4030 watchdog. + */ +void hw_watchdog_reset(void) +{ + u8 timeout = 0; + + /* do not reset watchdog too often - max every 4s */ + if (get_timer(twl_wd_time) < 4 * CONFIG_SYS_HZ) + return; + + /* localy lock twl4030 i2c bus */ + if (test_and_set_bit(0, &twl_i2c_lock)) + return; + + /* read actual watchdog timeout */ + twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout, + TWL4030_PM_RECEIVER_WATCHDOG_CFG); + + /* timeout 0 means watchdog is disabled */ + /* reset watchdog timeout to 31s (maximum) */ + if (timeout != 0) + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 31, + TWL4030_PM_RECEIVER_WATCHDOG_CFG); + + /* store last watchdog reset time */ + twl_wd_time = get_timer(0); + + /* localy unlock twl4030 i2c bus */ + test_and_clear_bit(0, &twl_i2c_lock); +} + +/* + * TWL4030 keypad handler for cfb_console + */ + +static const char keymap[] = { + /* normal */ + 'q', 'o', 'p', ',', '\b', 0, 'a', 's', + 'w', 'd', 'f', 'g', 'h', 'j', 'k', 'l', + 'e', '.', 0, '\r', 0, 'z', 'x', 'c', + 'r', 'v', 'b', 'n', 'm', ' ', ' ', 0, + 't', 0, 0, 0, 0, 0, 0, 0, + 'y', 0, 0, 0, 0, 0, 0, 0, + 'u', 0, 0, 0, 0, 0, 0, 0, + 'i', 5, 6, 0, 0, 0, 0, 0, + /* fn */ + '1', '9', '0', '=', '\b', 0, '*', '+', + '2', '#', '-', '_', '(', ')', '&', '!', + '3', '?', '^', '\r', 0, 156, '$', 238, + '4', '/', '\\', '"', '\'', '@', 0, '<', + '5', '|', '>', 0, 0, 0, 0, 0, + '6', 0, 0, 0, 0, 0, 0, 0, + '7', 0, 0, 0, 0, 0, 0, 0, + '8', 16, 17, 0, 0, 0, 0, 0, +}; + +static u8 keys[8]; +static u8 old_keys[8] = {0, 0, 0, 0, 0, 0, 0, 0}; +#define KEYBUF_SIZE 32 +static u8 keybuf[KEYBUF_SIZE]; +static u8 keybuf_head; +static u8 keybuf_tail; + +/* + * Routine: rx51_kp_init + * Description: Initialize HW keyboard. + */ +int rx51_kp_init(void) +{ + int ret = 0; + u8 ctrl; + ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &ctrl, + TWL4030_KEYPAD_KEYP_CTRL_REG); + + if (ret) + return ret; + + /* turn on keyboard and use hardware scanning */ + ctrl |= TWL4030_KEYPAD_CTRL_KBD_ON; + ctrl |= TWL4030_KEYPAD_CTRL_SOFT_NRST; + ctrl |= TWL4030_KEYPAD_CTRL_SOFTMODEN; + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, ctrl, + TWL4030_KEYPAD_KEYP_CTRL_REG); + /* enable key event status */ + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0xfe, + TWL4030_KEYPAD_KEYP_IMR1); + /* enable interrupt generation on rising and falling */ + /* this is a workaround for qemu twl4030 emulation */ + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x57, + TWL4030_KEYPAD_KEYP_EDR); + /* enable ISR clear on read */ + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x05, + TWL4030_KEYPAD_KEYP_SIH_CTRL); + return 0; +} + +static void rx51_kp_fill(u8 k, u8 mods) +{ + /* check if some cursor key without meta fn key was pressed */ + if (!(mods & 2) && (k == 18 || k == 31 || k == 33 || k == 34)) { + keybuf[keybuf_tail++] = '\e'; + keybuf_tail %= KEYBUF_SIZE; + keybuf[keybuf_tail++] = '['; + keybuf_tail %= KEYBUF_SIZE; + if (k == 18) /* up */ + keybuf[keybuf_tail++] = 'A'; + else if (k == 31) /* left */ + keybuf[keybuf_tail++] = 'D'; + else if (k == 33) /* down */ + keybuf[keybuf_tail++] = 'B'; + else if (k == 34) /* right */ + keybuf[keybuf_tail++] = 'C'; + keybuf_tail %= KEYBUF_SIZE; + return; + } + + if (mods & 2) { /* fn meta key was pressed */ + k = keymap[k+64]; + } else { + k = keymap[k]; + if (mods & 1) { /* ctrl key was pressed */ + if (k >= 'a' && k <= 'z') + k -= 'a' - 1; + } + if (mods & 4) { /* shift key was pressed */ + if (k >= 'a' && k <= 'z') + k += 'A' - 'a'; + else if (k == '.') + k = ':'; + else if (k == ',') + k = ';'; + } + } + keybuf[keybuf_tail++] = k; + keybuf_tail %= KEYBUF_SIZE; +} + +/* + * Routine: rx51_kp_tstc + * Description: Test if key was pressed (from buffer). + */ +int rx51_kp_tstc(void) +{ + u8 c, r, dk, i; + u8 intr; + u8 mods; + + /* localy lock twl4030 i2c bus */ + if (test_and_set_bit(0, &twl_i2c_lock)) + return 0; + + /* twl4030 remembers up to 2 events */ + for (i = 0; i < 2; i++) { + + /* check interrupt register for events */ + twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &intr, + TWL4030_KEYPAD_KEYP_ISR1+(2*i)); + + /* no event */ + if (!(intr&1)) + continue; + + /* read the key state */ + i2c_read(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_FULL_CODE_7_0, 1, keys, 8); + + /* cut out modifier keys from the keystate */ + mods = keys[4] >> 4; + keys[4] &= 0x0f; + + for (c = 0; c < 8; c++) { + + /* get newly pressed keys only */ + dk = ((keys[c] ^ old_keys[c])&keys[c]); + old_keys[c] = keys[c]; + + /* fill the keybuf */ + for (r = 0; r < 8; r++) { + if (dk&1) + rx51_kp_fill((c*8)+r, mods); + dk = dk >> 1; + } + + } + + } + + /* localy unlock twl4030 i2c bus */ + test_and_clear_bit(0, &twl_i2c_lock); + + return (KEYBUF_SIZE + keybuf_tail - keybuf_head)%KEYBUF_SIZE; +} + +/* + * Routine: rx51_kp_getc + * Description: Get last pressed key (from buffer). + */ +int rx51_kp_getc(void) +{ + keybuf_head %= KEYBUF_SIZE; + while (!rx51_kp_tstc()) + WATCHDOG_RESET(); + return keybuf[keybuf_head++]; +} + +/* + * Routine: board_mmc_init + * Description: Initialize mmc devices. + */ +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0, 0, 0); + omap_mmc_init(1, 0, 0); + return 0; +} diff --git a/board/nokia/rx51/rx51.h b/board/nokia/rx51/rx51.h new file mode 100644 index 0000000000..e66e241488 --- /dev/null +++ b/board/nokia/rx51/rx51.h @@ -0,0 +1,389 @@ +/* + * (C) Copyright 2012 + * Ивайло Димитров + * + * (C) Copyright 2011-2012 + * Pali Rohár + * + * (C) Copyright 2008 + * Dirk Behme + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _RX51_H_ +#define _RX51_H_ + +/* Needed for ROM SMC call */ +struct emu_hal_params_rx51 { + u32 num_params; + u32 param1; + u32 param2; + u32 param3; + u32 param4; +}; + +int print_cpuinfo(void); + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_RX51() \ +/* SDRC */\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ +/* GPMC */\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*nDMA_REQ2*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*nDMA_REQ3*/\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ +/* DSS */\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ +/* CAMERA */\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS*/\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS*/\ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ +/* Audio Interface */\ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLK*/\ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ +/* Expansion card */\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ +/* Wireless LAN */\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ +/* Bluetooth */\ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\ + MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144*/\ + MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\ + MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\ +/* Modem Interface */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/\ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT*/\ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG*/\ + MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY*/\ + MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\ + MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ + MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ +/* Serial Interface */\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX*/\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOM*/\ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\ + MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\ + MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ +/* USB EHCI (port 2) */\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | DIS | M3)) /*HSUSB2_DA2*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTU | DIS | M3)) /*HSUSB2_DA7*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTU | DIS | M3)) /*HSUSB2_DA4*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTU | DIS | M3)) /*HSUSB2_DA5*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTU | DIS | M3)) /*HSUSB2_DA6*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTU | DIS | M3)) /*HSUSB2_DA3*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DIR*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_NXT*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DA0*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DA1*/\ +/* Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*MMC1_WP*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MD*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA0*/\ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA1*/\ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA2*/\ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA7*/\ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA4*/\ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA5*/\ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA6*/\ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA3*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26m*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespw*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswa*/\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9ni*/\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmare0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmare1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmare2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmare3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrs*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtc*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeu*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlere*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleac*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusfl*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusfl*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ + +#define MUX_RX51_C() \ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/ + +#endif diff --git a/board/nokia/rx51/tag_omap.h b/board/nokia/rx51/tag_omap.h new file mode 100644 index 0000000000..60fa26f3e1 --- /dev/null +++ b/board/nokia/rx51/tag_omap.h @@ -0,0 +1,311 @@ +/* + * (C) Copyright 2011-2012 + * Pali Rohár + * + * (C) Copyright 2011 + * marcel@mesa.nl, Mesa Consulting B.V. + * + * (C) Copyright 2004-2005 + * Nokia Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +/* + * Code copied from maemo kernel 2.6.28 file + * arch/arm/plat-omap/include/mach/board.h + * + * Information structures for board-specific data + * + * Copyright (C) 2004 Nokia Corporation + * Written by Juha Yrjölä + */ + +/* Different peripheral ids */ +#define OMAP_TAG_CLOCK 0x4f01 +#define OMAP_TAG_SERIAL_CONSOLE 0x4f03 +#define OMAP_TAG_USB 0x4f04 +#define OMAP_TAG_LCD 0x4f05 +#define OMAP_TAG_GPIO_SWITCH 0x4f06 +#define OMAP_TAG_UART 0x4f07 +#define OMAP_TAG_FBMEM 0x4f08 +#define OMAP_TAG_STI_CONSOLE 0x4f09 +#define OMAP_TAG_CAMERA_SENSOR 0x4f0a +#define OMAP_TAG_PARTITION 0x4f0b +#define OMAP_TAG_TEA5761 0x4f10 +#define OMAP_TAG_TMP105 0x4f11 + +#define OMAP_TAG_BOOT_REASON 0x4f80 +#define OMAP_TAG_FLASH_PART_STR 0x4f81 +#define OMAP_TAG_VERSION_STR 0x4f82 + +#define OMAP_TAG_NOKIA_BT 0x4e01 +#define OMAP_TAG_WLAN_CX3110X 0x4e02 +#define OMAP_TAG_CBUS 0x4e03 +#define OMAP_TAG_EM_ASIC_BB5 0x4e04 + + +struct omap_clock_config { + /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ + u8 system_clock_type; +}; + +struct omap_serial_console_config { + u8 console_uart; + u32 console_speed; +}; + +struct omap_sti_console_config { + unsigned enable:1; + u8 channel; +}; + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; +}; + +struct omap_lcd_config { + char panel_name[16]; + char ctrl_name[16]; + s16 nreset_gpio; + u8 data_lines; +}; + +struct omap_fbmem_config { + u32 start; + u32 size; +}; + +struct omap_gpio_switch_config { + char name[12]; + u16 gpio; + u8 flags:4; + u8 type:4; + unsigned int key_code:24; /* Linux key code */ +}; + +struct omap_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +struct omap_tea5761_config { + u16 enable_gpio; +}; + +struct omap_partition_config { + char name[16]; + unsigned int size; + unsigned int offset; + /* same as in include/linux/mtd/partitions.h */ + unsigned int mask_flags; +}; + +struct omap_flash_part_str_config { + char part_table[0]; +}; + +struct omap_boot_reason_config { + char reason_str[12]; +}; + +struct omap_version_config { + char component[12]; + char version[12]; +}; + +/* + * Code copied from maemo kernel 2.6.28 file + * arch/arm/plat-omap/include/mach/board-nokia.h + * + * Information structures for Nokia-specific board config data + * + * Copyright (C) 2005 Nokia Corporation + */ + +struct omap_bluetooth_config { + u8 chip_type; + u8 bt_wakeup_gpio; + u8 host_wakeup_gpio; + u8 reset_gpio; + u8 bt_uart; + u8 bd_addr[6]; + u8 bt_sysclk; +}; + +struct omap_wlan_cx3110x_config { + u8 chip_type; + u8 reserverd; + s16 power_gpio; + s16 irq_gpio; + s16 spi_cs_gpio; +}; + +struct omap_cbus_config { + s16 clk_gpio; + s16 dat_gpio; + s16 sel_gpio; +}; + +struct omap_em_asic_bb5_config { + s16 retu_irq_gpio; + s16 tahvo_irq_gpio; +}; + +/* + * omap_tag handling + * + * processing omap tag structures + * + * Copyright (C) 2011 marcel@mesa.nl, Mesa Consulting B.V. + * Copyright (C) 2012 Pali Rohár + */ + +/* TI OMAP specific information */ +#define ATAG_BOARD 0x414f4d50 + +struct tag_omap_header { + u16 tag; + u16 size; +}; + +struct tag_omap { + struct tag_omap_header hdr; + union { + struct omap_clock_config clock; + struct omap_serial_console_config serial_console; + struct omap_sti_console_config sti_console; + struct omap_usb_config usb; + struct omap_lcd_config lcd; + struct omap_fbmem_config fbmem; + struct omap_gpio_switch_config gpio_switch; + struct omap_uart_config uart; + struct omap_tea5761_config tea5761; + struct omap_partition_config partition; + struct omap_flash_part_str_config flash_part_str; + struct omap_boot_reason_config boot_reason; + struct omap_version_config version; + struct omap_bluetooth_config bluetooth; + struct omap_wlan_cx3110x_config wlan_cx3110x; + struct omap_cbus_config cbus; + struct omap_em_asic_bb5_config em_asic_bb5; + } u; +}; + +#define tag_omap_next(t) ((struct tag_omap *)((u8 *)(t) + \ + (t)->hdr.size + sizeof(struct tag_omap_header))) + +#define OMAP_TAG_HEADER_CONFIG(config, type) \ + .hdr.tag = config, \ + .hdr.size = sizeof(struct type) + +#define OMAP_TAG_UART_CONFIG(p1) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_UART, omap_uart_config), \ + .u.uart.enabled_uarts = p1, \ + } + +#define OMAP_TAG_SERIAL_CONSOLE_CONFIG(p1, p2) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_SERIAL_CONSOLE, \ + omap_serial_console_config), \ + .u.serial_console.console_uart = p1, \ + .u.serial_console.console_speed = p2, \ + } + +#define OMAP_TAG_LCD_CONFIG(p1, p2, p3, p4) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_LCD, omap_lcd_config), \ + .u.lcd.panel_name = p1, \ + .u.lcd.ctrl_name = p2, \ + .u.lcd.nreset_gpio = p3, \ + .u.lcd.data_lines = p4, \ + } + +#define OMAP_TAG_GPIO_SWITCH_CONFIG(p1, p2, p3, p4, p5) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_GPIO_SWITCH, \ + omap_gpio_switch_config), \ + .u.gpio_switch.name = p1, \ + .u.gpio_switch.gpio = p2, \ + .u.gpio_switch.flags = p3, \ + .u.gpio_switch.type = p4, \ + .u.gpio_switch.key_code = p5, \ + } + +#define OMAP_TAG_WLAN_CX3110X_CONFIG(p1, p2, p3, p4, p5) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_WLAN_CX3110X, \ + omap_wlan_cx3110x_config), \ + .u.wlan_cx3110x.chip_type = p1, \ + .u.wlan_cx3110x.reserverd = p2, \ + .u.wlan_cx3110x.power_gpio = p3, \ + .u.wlan_cx3110x.irq_gpio = p4, \ + .u.wlan_cx3110x.spi_cs_gpio = p5, \ + } + +#define OMAP_TAG_PARTITION_CONFIG(p1, p2, p3, p4) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_PARTITION, \ + omap_partition_config), \ + .u.partition.name = p1, \ + .u.partition.size = p2, \ + .u.partition.offset = p3, \ + .u.partition.mask_flags = p4, \ + } + +#define OMAP_TAG_BOOT_REASON_CONFIG(p1) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_BOOT_REASON, \ + omap_boot_reason_config), \ + .u.boot_reason.reason_str = p1, \ + } + +#define OMAP_TAG_VERSION_STR_CONFIG(p1, p2) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_VERSION_STR, \ + omap_version_config), \ + .u.version.component = p1, \ + .u.version.version = p2, \ + } diff --git a/boards.cfg b/boards.cfg index a1bae069c2..92eb778d56 100644 --- a/boards.cfg +++ b/boards.cfg @@ -269,6 +269,7 @@ devkit8000 arm armv7 devkit8000 timll mcx arm armv7 mcx htkw omap3 tricorder arm armv7 tricorder corscience omap3 twister arm armv7 twister technexion omap3 +nokia_rx51 arm armv7 rx51 nokia omap3 omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 omap5_evm arm armv7 omap5_evm ti omap5 diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51 new file mode 100644 index 0000000000..a8fdfcd372 --- /dev/null +++ b/doc/README.nokia_rx51 @@ -0,0 +1,104 @@ +Board: Nokia RX-51 aka N900 + +This board definition results in a u-boot.bin which can be chainloaded +from NOLO in qemu or on a real N900. It does very little hardware config +because NOLO has already configured the board. Only needed is enabling +internal eMMC memory via twl4030 regulator which is not enabled by NOLO. + +NOLO is expecting a kernel image and will treat any image it finds in +onenand as such. This u-boot is intended to be flashed to the N900 like +a kernel. In order to transparently boot the original kernel, it will be +appended to u-boot.bin at 0x40000. NOLO will load the entire image into +(random) memory and execute u-boot, which saves hw revision, boot reason +and boot mode ATAGs set by NOLO. Then the bootscripts will attempt to load +uImage or boot.scr from a fat, ext2/ext3 or ext4 filesystem in external +SD card or internal eMMC memory. If this fails or keyboard is closed then +the appended kernel image will be booted using some generated and some +stored ATAGs (see boot order). + +There is support for hardware watchdog. Hardware watchdog is started by +NOLO so u-boot must kick watchdog to prevent reboot device (but not very +often, max every 2 seconds). There is also support for framebuffer display +output with ANSI espace codes and the N900 HW keyboard input. USB tty works +but is disabled because it prevents the current Maemo kernel from booting. + +When U-Boot is starting it enable IBE bit in Auxiliary Control Register, +which is needed for Thumb-2 ISA support. It is workaround for errata 430973. + +Default boot order: + + * 0. if keyboard is closed boot automatically attached kernel image + * 1. try boot from external SD card + * 2. try boot from internal eMMC memory + * 3. try boot from attached kernel image + +Boot from SD or eMMC in this order: + + * 1. + * 1.1 find boot.scr on first fat partition + * 1.2 find uImage on first fat parition + * 1.3 same order for 2. - 4. fat partition + * 2. same as 1. but for ext2/3 partition + * 3. same as 1. but for ext4 partition + + +Available additional commands/variables: + + * run sercon - Use serial port for control + * run usbcon - Use usbtty for control + * run vgacon - Use framebuffer and HW keyboard for control (default) + + * run sdboot - Boot from external SD card (see boot order) + * run emmcboot - Boot from internal eMMC memory (see boot order) + * run attachboot - Boot attached kernel image (attached to U-Boot binary) + + * run scriptload - Load boot script ${mmcscriptfile} + * run scriptboot - Run loaded boot script + * run kernload - Load kernel image ${mmckernfile} + * run initrdload - Load initrd image ${mmcinitrdfile} + * run kernboot - Boot loaded kernel image + * run kerninitrdboot - Boot loaded kernel image with loaded initrd image + + * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile} + * run trymmckernboot - Try to load and boot kernel image ${mmckernfile} + * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile} + with initrd image ${mmcinitrdfile} + +Additional variables for loading files from mmc: + + * mmc ${mmcnum} (0 - external, 1 - internal) + * partition number ${mmcpart} (1 - 4) + * parition type ${mmctype} (fat, ext2) + +Additional varuables for booting kernel: + + * setup_omap_atag - Add OMAP table into atags structure (needs maemo kernel) + * setup_console_atag - Enable serial console in OMAP table + * setup_boot_reason_atag - Change boot reason in OMAP table + * setup_boot_mode_atag - Change boot mode in OMAP table + +USB TTY: + + Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled. + For enabling USB TTY just add this line to file include/configs/nokia_rx51.h + + #define CONFIG_USB_TTY + + +ONENAND support: + + ONENAND support is disabled because not working yet and cause linux kernel to + crash or no access to mtd. For enabling ONENAND support add this line at begin + of file include/configs/nokia_rx51.h + + #define ONENAND_SUPPORT + + +UBIFS support: + + UBIFS support is disabled, because U-Boot image is too big and cannot be + flashed with attached zImage to RX-51 kernel nand area. For enabling UBIFS + support first enable ONENAND support and then add this line at begin of file + include/configs/nokia_rx51.h + + #define UBIFS_SUPPORT diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h new file mode 100644 index 0000000000..8506604a76 --- /dev/null +++ b/include/configs/nokia_rx51.h @@ -0,0 +1,452 @@ +/* + * (C) Copyright 2011-2012 + * Pali Rohár + * + * (C) Copyright 2010 + * Alistair Buxton + * + * Derived from Beagle Board code: + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff + * Syed Mohammed Khasim + * + * Configuration settings for the Nokia RX-51 aka N900. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ + +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_OMAP34XX /* which is a 34XX */ +#define CONFIG_OMAP3430 /* which is in a 3430 */ +#define CONFIG_OMAP3_RX51 /* working with RX51 */ +#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ + +#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 + +/* + * Nokia X-Loader loading secondary image to address 0x80400000 + * NOLO loading boot image to random place, so it doesn't really + * matter what we set this to. We have to copy u-boot to this address + */ +#define CONFIG_SYS_TEXT_BASE 0x80008000 + +#define CONFIG_SDRC /* The chip has SDRC controller */ + +#include /* get chip and board defs */ +#include +#include +#include + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R +#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ + +#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */ +#define CONFIG_INITRD_TAG /* enable passing initrd */ +#define CONFIG_REVISION_TAG /* enable passing revision tag*/ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_UBI_SIZE (512 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \ + (128 << 10)) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 on RX-51 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_MUSB_UDC +#define CONFIG_MUSB_HDC +#define CONFIG_USB_OMAP3 +#define CONFIG_TWL4030_USB + +/* USB device configuration */ +#define CONFIG_USB_DEVICE +#define CONFIG_USBD_VENDORID 0x0421 +#define CONFIG_USBD_PRODUCTID 0x01c8 +#define CONFIG_USBD_MANUFACTURER "Nokia" +#define CONFIG_USBD_PRODUCT_NAME "N900" + +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_NO_FLASH + +/* commands to include */ +#include + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_EXT4 /* EXT4 Support */ +#define CONFIG_CMD_FAT /* FAT support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_GPIO /* Enable gpio command */ + +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ + +#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ + +#ifdef ONENAND_SUPPORT + +#define CONFIG_CMD_ONENAND /* ONENAND support */ +#define CONFIG_CMD_MTDPARTS /* mtd parts support */ + +#ifdef UBIFS_SUPPORT +#define CONFIG_CMD_UBI /* UBI Support */ +#define CONFIG_CMD_UBIFS /* UBIFS Support */ +#endif + +#endif + +/* commands not needed from config_cmd_default.h */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS /* NFS support */ +#undef CONFIG_CMD_SAVEENV /* saveenv */ +#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ + +#define CONFIG_OMAP3_SPI +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP34XX_I2C + +/* + * TWL4030 + */ +#define CONFIG_TWL4030_POWER +#define CONFIG_TWL4030_LED +#define CONFIG_TWL4030_KEYPAD + +#define CONFIG_OMAP_GPIO +#define GPIO_SLIDE 71 + +/* + * Board ONENAND Info. + */ + +#define PART1_NAME "bootloader" +#define PART1_SIZE 128 +#define PART1_MULL 1024 +#define PART1_SUFF "k" +#define PART1_OFFS 0x00000000 +#define PART1_MASK 0x00000003 + +#define PART2_NAME "config" +#define PART2_SIZE 384 +#define PART2_MULL 1024 +#define PART2_SUFF "k" +#define PART2_OFFS 0x00020000 +#define PART2_MASK 0x00000000 + +#define PART3_NAME "log" +#define PART3_SIZE 256 +#define PART3_MULL 1024 +#define PART3_SUFF "k" +#define PART3_OFFS 0x00080000 +#define PART3_MASK 0x00000000 + +#define PART4_NAME "kernel" +#define PART4_SIZE 2 +#define PART4_MULL 1024*1024 +#define PART4_SUFF "m" +#define PART4_OFFS 0x000c0000 +#define PART4_MASK 0x00000000 + +#define PART5_NAME "initfs" +#define PART5_SIZE 2 +#define PART5_MULL 1024*1024 +#define PART5_SUFF "m" +#define PART5_OFFS 0x002c0000 +#define PART5_MASK 0x00000000 + +#define PART6_NAME "rootfs" +#define PART6_SIZE 257280 +#define PART6_MULL 1024 +#define PART6_SUFF "k" +#define PART6_OFFS 0x004c0000 +#define PART6_MASK 0x00000000 + +#ifdef ONENAND_SUPPORT + +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#ifdef UBIFS_SUPPORT +#define CONFIG_RBTREE +#define CONFIG_LZO +#endif + +#define MTDIDS_DEFAULT "onenand0=onenand" +#define MTDPARTS_DEFAULT "mtdparts=onenand:" \ + __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \ + __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \ + __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \ + __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \ + __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \ + "-(" PART6_NAME ")" + +#endif + +/* Watchdog support */ +#define CONFIG_HW_WATCHDOG + +/* + * Framebuffer + */ +/* Video console */ +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */ +#define CONFIG_VIDEO_LOGO +#define VIDEO_FB_16BPP_PIXEL_SWAP +#define VIDEO_FB_16BPP_WORD_SWAP +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN + +/* functions for cfb_console */ +#define VIDEO_KBD_INIT_FCT rx51_kp_init() +#define VIDEO_TSTC_FCT rx51_kp_tstc +#define VIDEO_GETC_FCT rx51_kp_getc +#ifndef __ASSEMBLY__ +int rx51_kp_init(void); +int rx51_kp_tstc(void); +int rx51_kp_getc(void); +#endif + +#ifndef MTDPARTS_DEFAULT +#define MTDPARTS_DEFAULT +#endif + +/* Environment information */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "usbtty=cdc_acm\0" \ + "stdin=vga\0" \ + "stdout=vga\0" \ + "stderr=vga\0" \ + "setcon=setenv stdin ${con};" \ + "setenv stdout ${con};" \ + "setenv stderr ${con}\0" \ + "sercon=setenv con serial; run setcon\0" \ + "usbcon=setenv con usbtty; run setcon\0" \ + "vgacon=setenv con vga; run setcon\0" \ + "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ + "switchmmc=mmc dev ${mmcnum}\0" \ + "kernaddr=0x82008000\0" \ + "initrdaddr=0x84008000\0" \ + "scriptaddr=0x86008000\0" \ + "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ + "${loadaddr} ${mmcfile}\0" \ + "kernload=setenv loadaddr ${kernaddr};" \ + "setenv mmcfile ${mmckernfile};" \ + "run fileload\0" \ + "initrdload=setenv loadaddr ${initrdaddr};" \ + "setenv mmcfile ${mmcinitrdfile};" \ + "run fileload\0" \ + "scriptload=setenv loadaddr ${scriptaddr};" \ + "setenv mmcfile ${mmcscriptfile};" \ + "run fileload\0" \ + "scriptboot=echo Running ${mmcscriptfile} from mmc " \ + "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ + "kernboot=echo Booting ${mmckernfile} from mmc " \ + "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \ + "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ + "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \ + "attachboot=echo Booting attached kernel image ...;" \ + "setenv setup_omap_atag 1;" \ + "bootm ${attkernaddr};" \ + "setenv setup_omap_atag\0" \ + "trymmcscriptboot=if run switchmmc; then " \ + "if run scriptload; then " \ + "run scriptboot;" \ + "fi;" \ + "fi\0" \ + "trymmckernboot=if run switchmmc; then " \ + "if run kernload; then " \ + "run kernboot;" \ + "fi;" \ + "fi\0" \ + "trymmckerninitrdboot=if run switchmmc; then " \ + "if run initrdload; then " \ + "if run kernload; then " \ + "run kerninitrdboot;" \ + "fi;" \ + "fi; " \ + "fi\0" \ + "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ + "setenv mmckernfile uImage; run trymmckernboot\0" \ + "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ + "setenv mmcpart 2; run trymmcpartboot;" \ + "setenv mmcpart 3; run trymmcpartboot;" \ + "setenv mmcpart 4; run trymmcpartboot\0" \ + "trymmcboot=if run switchmmc; then " \ + "setenv mmctype fat;" \ + "run trymmcallpartboot;" \ + "setenv mmctype ext2;" \ + "run trymmcallpartboot;" \ + "setenv mmctype ext4;" \ + "run trymmcallpartboot;" \ + "fi\0" \ + "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ + "sdboot=setenv mmcnum 0; run trymmcboot\0" \ + "" + +#define CONFIG_PREBOOT \ + "if run slide; then true; else run attachboot; fi;" \ + "echo Extra commands:;" \ + "echo run sercon - Use serial port for control.;" \ + "echo run usbcon - Use usbtty for control.;" \ + "echo run vgacon - Use framebuffer/keyboard.;" \ + "echo run sdboot - Boot from SD card slot.;" \ + "echo run emmcboot - Boot internal eMMC memory.;" \ + "echo run attachboot - Boot attached kernel image.;" \ + "echo" + +#define CONFIG_BOOTCOMMAND \ + "run sdboot;" \ + "run emmcboot;" \ + "run attachboot;" \ + "echo" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Nokia RX-51 # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/ + +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 + +/* + * FLASH and environment organization + */ + +#define CONFIG_ENV_IS_NOWHERE + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + +/* + * Attached kernel image + */ + +#define SDRAM_SIZE 0x10000000 /* 256 MB */ +#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE) + +#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ +#define KERNEL_OFFSET 0x40000 /* 256 kB */ +#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) +#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) + +/* Reserve protected RAM for attached kernel */ +#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) + +#endif /* __CONFIG_H */ -- cgit v1.2.1 From 843a7ee8c4b1e47fae41268d6b95306f7e6408f5 Mon Sep 17 00:00:00 2001 From: Raphael Assenat Date: Mon, 22 Oct 2012 05:23:46 +0000 Subject: eco5pk: Add new board and default config Signed-off-by: Raphael Assenat [trini: Squash boards.cfg / MAINTAINERS change into main patch] Signed-off-by: Tom Rini --- MAINTAINERS | 4 + board/8dtech/eco5pk/Makefile | 43 +++++ board/8dtech/eco5pk/eco5pk.c | 61 +++++++ board/8dtech/eco5pk/eco5pk.h | 404 +++++++++++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/eco5pk.h | 81 +++++++++ 6 files changed, 594 insertions(+) create mode 100644 board/8dtech/eco5pk/Makefile create mode 100644 board/8dtech/eco5pk/eco5pk.c create mode 100644 board/8dtech/eco5pk/eco5pk.h create mode 100644 include/configs/eco5pk.h diff --git a/MAINTAINERS b/MAINTAINERS index d4c511783f..f4625c3f05 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -573,6 +573,10 @@ Albert ARIBAUD edminiv2 ARM926EJS (Orion5x SoC) +Raphael Assenat + + eco5pk ARM ARMV7 (AM35x SoC) + Stefano Babic ea20 davinci diff --git a/board/8dtech/eco5pk/Makefile b/board/8dtech/eco5pk/Makefile new file mode 100644 index 0000000000..befe60aac0 --- /dev/null +++ b/board/8dtech/eco5pk/Makefile @@ -0,0 +1,43 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Adapted from ti/evm/Makefile +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := eco5pk.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/board/8dtech/eco5pk/eco5pk.c b/board/8dtech/eco5pk/eco5pk.c new file mode 100644 index 0000000000..cdb5b6f67d --- /dev/null +++ b/board/8dtech/eco5pk/eco5pk.c @@ -0,0 +1,61 @@ +/* + * eco5pk.c - board file for 8D Technology's AM3517 based eco5pk board + * + * Based on am3517evm.c + * + * Copyright (C) 2011-2012 8D Technologies inc. + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "eco5pk.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + gpio_request(30, "RESOUT"); + gpio_direction_output(30, 1); + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_ECO5_PK(); +} diff --git a/board/8dtech/eco5pk/eco5pk.h b/board/8dtech/eco5pk/eco5pk.h new file mode 100644 index 0000000000..d289e2bf1d --- /dev/null +++ b/board/8dtech/eco5pk/eco5pk.h @@ -0,0 +1,404 @@ +/* + * eco5.h - Header file for the 8D Technologies ECO5 board. + * + * Based on am3517evm.h + * Based on ti/evm/evm.h + * + * Copyright (C) 2011 8D Technologies inc. + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ECO5PK_H__ +#define _ECO5PK_H__ + +const omap3_sysinfo sysinfo = { + DDR_DISCRETE, + "ECO5 Board", + "NAND", +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_ECO5_PK() \ + /* SDRC */\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_CKE0), (M0)) \ + MUX_VAL(CP(SDRC_CKE1), (M0)) \ + MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \ + /* GPMC */\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M3)) \ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | DIS | M4)) \ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \ + /* - ETH_nRESET*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) \ + /* DSS */\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA0), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA1), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA2), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA3), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA4), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA5), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA6), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA7), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | EN | M4)) \ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | EN | M4)) \ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | EN | M4)) \ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \ + /* CAMERA */\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + /* - CAM_RESET*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \ + /* MMC */\ + MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \ + \ + MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M0)) \ + /* McBSP */\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /* LED ACT */ \ + \ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_152*/\ + /* - LCD_INI*/\ + MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\ + /* - LCD_ENVDD */\ + MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\ + /* - LCD_QVGA/nVGA */\ + MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_155*/\ + /* - LCD_RESB */\ + /* UART */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \ + \ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \ + /* I2C */\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \ + /* McSPI */\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\ + MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\ + /* - LAN_INTR*/\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) \ + \ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \ + /* LCD_EN_BACKLIGHT */\ + MUX_VAL(CP(MCSPI2_CS1), (IDIS | PTD | EN | M4)) \ + /* CCDC */\ + MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \ + MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \ + MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \ + /* RMII */\ + MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \ + MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \ + MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_RXER), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \ + MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \ + /* HECC */\ + MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \ + /* HSUSB */\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \ + /* HDQ */\ + MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) \ + /* Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \ + /* SYS_nRESWARM */\ + MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \ + /* - GPIO30 */\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\ + /* - PEN_IRQ */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /* GPIO_8 */\ + /* - VIO_1V8*/\ + MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \ + \ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \ + /* JTAG */\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) \ + /* ETK (ES2 onwards) */\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) \ + /* Die to Die */\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) + +#endif diff --git a/boards.cfg b/boards.cfg index 92eb778d56..36415a79b2 100644 --- a/boards.cfg +++ b/boards.cfg @@ -245,6 +245,7 @@ mx6qarm2 arm armv7 mx6qarm2 freesca mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +eco5pk arm armv7 eco5pk 8dtech omap3 cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 diff --git a/include/configs/eco5pk.h b/include/configs/eco5pk.h new file mode 100644 index 0000000000..b9ebf6a2a8 --- /dev/null +++ b/include/configs/eco5pk.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2012 8D Technologies inc. + * Based on mt_ventoux.h, original banner below: + * + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * Copyright (C) 2009 TechNexion Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "tam3517-common.h" + +#undef CONFIG_USB_EHCI +#undef CONFIG_USB_EHCI_OMAP +#undef CONFIG_USB_OMAP3 +#undef CONFIG_CMD_USB + +/* Our console port is port3 */ +#undef CONFIG_CONS_INDEX +#undef CONFIG_SYS_NS16550_COM1 +#undef CONFIG_SERIAL1 + +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 + +#define MACH_TYPE_ECO5_PK 4017 +#define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK + +#define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_AUTO_COMPLETE + +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "ECO5-PK # " +#define CONFIG_SYS_PROMPT V_PROMPT + +/* + * Set its own mtdparts, different from common + */ +#undef MTDIDS_DEFAULT +#undef MTDPARTS_DEFAULT +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(xloader-nand)," \ + "1024k(uboot-nand),256k(params-nand)," \ + "5120k(kernel),-(ubifs)" + +/* + * The arithmetic in tam3517.h is wrong for us and the kernel gets overwritten. + */ +#undef CONFIG_ENV_OFFSET_REDUND +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_SYS_ENV_SECT_SIZE) + +#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \ + "install_kernel=if dhcp $bootfile; then nand erase kernel;" \ + "nand write $fileaddr kernel; fi\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" \ + "serverip=192.168.142.60\0" + + +#endif /* __CONFIG_H */ -- cgit v1.2.1 From 9cd7b4cdca2500608b218fb4de215eddd8e66111 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Tue, 23 Oct 2012 01:56:40 +0000 Subject: am335x: add mux config for DDR3 version of beaglebone This fixes the following boothang in SPL: Unknown board, cannot configure pinmux.### ERROR ### Please RESET the board ### Future commits will add pinmuxes for more on-board peripherals. Signed-off-by: Koen Kooi --- board/ti/am335x/mux.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 6a5f23a551..acb8ff3e5c 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -256,6 +256,12 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) configure_module_pin_mux(gpio0_7_pin_mux); configure_module_pin_mux(rgmii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux_sk_evm); + } else if (!strncmp(header->name, "A335BNLT", HDR_NAME_LEN)) { + /* Beaglebone LT pinmux */ + configure_module_pin_mux(i2c1_pin_mux); + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(mmc1_pin_mux); } else { puts("Unknown board, cannot configure pinmux."); hang(); -- cgit v1.2.1 From 57f588be60eac8135cdfb366237fbf6e6dc2d316 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 30 Oct 2012 22:23:28 -0700 Subject: omap3: Rework board.c for !CONFIG_SYS_L2CACHE_OFF When CONFIG_SYS_L2CACHE_OFF is defined we end up with a few warnings currently. Re-order functions so that we don't have that anymore. Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/omap3/board.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 9cee1d9b49..f3cd81ad98 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -50,7 +50,9 @@ DECLARE_GLOBAL_DATA_PTR; /* Declarations */ extern omap3_sysinfo sysinfo; static void omap3_setup_aux_cr(void); +#ifndef CONFIG_SYS_L2CACHE_OFF static void omap3_invalidate_l2_cache_secure(void); +#endif static const struct gpio_bank gpio_bank_34xx[6] = { { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, @@ -410,19 +412,6 @@ static void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits) } } -static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits) -{ - u32 acr; - - /* Read ACR */ - asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); - acr &= ~clear_bits; - acr |= set_bits; - - /* Write ACR - affects non-secure banked bits */ - asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr)); -} - static void omap3_setup_aux_cr(void) { /* Workaround for Cortex-A8 errata: #454179 #430973 @@ -436,6 +425,19 @@ static void omap3_setup_aux_cr(void) } #ifndef CONFIG_SYS_L2CACHE_OFF +static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits) +{ + u32 acr; + + /* Read ACR */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + acr &= ~clear_bits; + acr |= set_bits; + + /* Write ACR - affects non-secure banked bits */ + asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr)); +} + /* Invalidate the entire L2 cache from secure mode */ static void omap3_invalidate_l2_cache_secure(void) { -- cgit v1.2.1 From a956bdcb3ff759f753e3f0c5e40e58f4c3056e22 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Fri, 2 Nov 2012 03:35:59 +0000 Subject: am335x: add initial AM335x IDK board support This patch extends the am335x_evm board for the AM335x IDK. The IDK board uses MII for the ethernet phy (same as Beaglebone board) and MMC0 for storage (but without card detect line). The IDK uses UART3 for console. So u-boot must be build with CONFIG_SERIAL4 and CONFIG_CONS_INDEX=4 or for the am335x_evm_uart3 board configuration as introduced by Andrew Bradfords recent patch series "am33xx: Enable UART {1,2,3,4,5}...". When using the IDK with console on UART0, those patches are not required. In this case the board slightly needs to be modified. Signed-off-by: Matthias Fuchs --- board/ti/am335x/board.c | 7 ++++++- board/ti/am335x/mux.c | 20 ++++++++++++++++++++ 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 013ad881f0..e5ad76e9a0 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -68,6 +68,11 @@ static inline int board_is_evm_sk(void) return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); } +static inline int board_is_idk(void) +{ + return !strncmp(header.config, "SKU#02", 6); +} + /* * Read header information from EEPROM into global structure. */ @@ -378,7 +383,7 @@ int board_eth_init(bd_t *bis) return -1; } - if (board_is_bone() || board_is_bone_lt()) { + if (board_is_bone() || board_is_bone_lt() || board_is_idk()) { writel(MII_MODE_ENABLE, &cdev->miisel); cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_MII; diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index acb8ff3e5c..8437ef515a 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -69,6 +69,17 @@ static struct module_pin_mux mmc0_pin_mux[] = { {-1}, }; +static struct module_pin_mux mmc0_no_cd_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ + {-1}, +}; + static struct module_pin_mux mmc0_pin_mux_sk_evm[] = { {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ @@ -250,6 +261,15 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) configure_module_pin_mux(mmc1_pin_mux); configure_module_pin_mux(spi0_pin_mux); } + } else if (!strncmp(header->config, "SKU#02", 6)) { + /* + * Industrial Motor Control (IDK) + * note: IDK console is on UART3 by default. + * So u-boot mus be build with CONFIG_SERIAL4 and + * CONFIG_CONS_INDEX=4 + */ + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_no_cd_pin_mux); } else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) { /* Starter Kit EVM */ configure_module_pin_mux(i2c1_pin_mux); -- cgit v1.2.1 From cc69cc002714422cbb551e3d6ebf7e2723c0c6de Mon Sep 17 00:00:00 2001 From: "Jens Scharsig (BuS Elektronik)" Date: Thu, 18 Oct 2012 21:41:10 +0000 Subject: arm: atmel: cpux9k2: add missing cache configs * add CONFIG_SYS_CACHELINE_SIZE to eb_cpux9k2 board config header * dissable dcache (CONFIG_SYS_DCACHE_OFF) for eb_cpux9k2 Signed-off-by: Jens Scharsig (BuS Elektronik) --- include/configs/eb_cpux9k2.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 9371ec31f3..3be4929fc2 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -43,6 +43,10 @@ #define MACH_TYPE_EB_CPUX9K2 1977 #define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 + +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_DCACHE_OFF + /*--------------------------------------------------------------------------*/ #ifndef CONFIG_RAMBOOT #define CONFIG_SYS_TEXT_BASE 0x00000000 @@ -56,7 +60,6 @@ #define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 #define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ - #define CONFIG_BOOT_RETRY_TIME 30 #define CONFIG_CMDLINE_EDITING -- cgit v1.2.1 From 7ae534cef9393bd60d261aedff87872a319aa769 Mon Sep 17 00:00:00 2001 From: Vikram Narayanan Date: Tue, 23 Oct 2012 00:21:16 +0000 Subject: socfpga/spl: Remove timer_init from spl_board_init Timer is initialized already in board_init_r function in (common/spl/spl.c) No need to initialize it again Signed-off-by: Vikram Narayanan Cc: Dinh Nguyen --- arch/arm/cpu/armv7/socfpga/spl.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c index 944238bad1..23053fd90f 100644 --- a/arch/arm/cpu/armv7/socfpga/spl.c +++ b/arch/arm/cpu/armv7/socfpga/spl.c @@ -37,9 +37,6 @@ u32 spl_boot_device(void) */ void spl_board_init(void) { - /* init timer for enabling delay function */ - timer_init(); - /* de-assert reset for peripherals and bridges based on handoff */ reset_deassert_peripherals_handoff(); -- cgit v1.2.1 From 46d626d3926cf6b9f9c477782c5a0ee620a424cd Mon Sep 17 00:00:00 2001 From: Vikram Narayanan Date: Tue, 23 Oct 2012 00:22:53 +0000 Subject: socfpga/spl: Remove malloc.h Remove unused header Signed-off-by: Vikram Narayanan --- arch/arm/cpu/armv7/socfpga/spl.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c index 23053fd90f..84216eb1ef 100644 --- a/arch/arm/cpu/armv7/socfpga/spl.c +++ b/arch/arm/cpu/armv7/socfpga/spl.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include -- cgit v1.2.1