From 93a0ea501e1eca1ae5d7d2624906b656c765e5e8 Mon Sep 17 00:00:00 2001 From: Andrew Ruder Date: Tue, 12 Aug 2014 09:26:00 -0500 Subject: arm: mx31: use common timer functions This patch moves mx31 to the common timer functions added in commit 8dfafdd - Introduce common timer functions The (removed) mx31 timer code (specifically __udelay()) could deadlock at the 32-bit boundary of get_ticks(). get_ticks() returned a 32-bit value cast up to a 64-bit value. If get_ticks() + tmo in __udelay() crossed the 32-bit boundary, the while condition became unconditionally true and locks the processor. Rather than patch the specific mx31 issues, simply move everything over to the common code. Signed-off-by: Andrew Ruder Cc: Marek Vasut Cc: Linus Walleij Cc: Wolfgang Denk Cc: Fabio Estevam Cc: Helmut Raiger --- arch/arm/cpu/arm1136/mx31/timer.c | 104 +----------------------------- arch/arm/include/asm/arch-mx31/imx-regs.h | 10 +++ 2 files changed, 12 insertions(+), 102 deletions(-) diff --git a/arch/arm/cpu/arm1136/mx31/timer.c b/arch/arm/cpu/arm1136/mx31/timer.c index f111242e53..3a81ce427c 100644 --- a/arch/arm/cpu/arm1136/mx31/timer.c +++ b/arch/arm/cpu/arm1136/mx31/timer.c @@ -7,9 +7,6 @@ #include #include -#include -#include -#include #include #define TIMER_BASE 0x53f90000 /* General purpose timer 1 */ @@ -28,57 +25,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* - * "time" is measured in 1 / CONFIG_SYS_HZ seconds, - * "tick" is internal timer period - */ - -#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION -/* ~0.4% error - measured with stop-watch on 100s boot-delay */ -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, MXC_CLK32); - return tick; -} - -static inline unsigned long long time_to_tick(unsigned long long time) -{ - time *= MXC_CLK32; - do_div(time, CONFIG_SYS_HZ); - return time; -} - -static inline unsigned long long us_to_tick(unsigned long long us) -{ - us = us * MXC_CLK32 + 999999; - do_div(us, 1000000); - return us; -} -#else -/* ~2% error */ -#define TICK_PER_TIME ((MXC_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ) -#define US_PER_TICK (1000000 / MXC_CLK32) - -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - do_div(tick, TICK_PER_TIME); - return tick; -} - -static inline unsigned long long time_to_tick(unsigned long long time) -{ - return time * TICK_PER_TIME; -} - -static inline unsigned long long us_to_tick(unsigned long long us) -{ - us += US_PER_TICK - 1; - do_div(us, US_PER_TICK); - return us; -} -#endif - /* The 32768Hz 32-bit timer overruns in 131072 seconds */ int timer_init(void) { @@ -95,53 +41,7 @@ int timer_init(void) return 0; } -unsigned long long get_ticks(void) -{ - ulong now = GPTCNT; /* current tick value */ - - if (now >= gd->arch.lastinc) /* normal mode (non roll) */ - /* move stamp forward with absolut diff ticks */ - gd->arch.tbl += (now - gd->arch.lastinc); - else /* we have rollover of incrementer */ - gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now; - gd->arch.lastinc = now; - return gd->arch.tbl; -} - -ulong get_timer_masked(void) -{ - /* - * get_ticks() returns a long long (64 bit), it wraps in - * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~ - * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in - * 5 * 10^6 days - long enough. - */ - return tick_to_time(get_ticks()); -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* delay x useconds AND preserve advance timestamp value */ -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - ulong tmo; - - tmo = us_to_tick(usec); - tmp = get_ticks() + tmo; /* get current timestamp */ - - while (get_ticks() < tmp) /* loop till event */ - /*NOP*/; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) +unsigned long timer_read_counter(void) { - return MXC_CLK32; + return GPTCNT; } diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index f23350e5c2..71ebd243d7 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -909,9 +909,19 @@ struct esdc_regs { #define MXC_CSPIPERIOD_32KHZ (1 << 15) #define MAX_SPI_BYTES 4 + #define MXC_SPI_BASE_ADDRESSES \ 0x43fa4000, \ 0x50010000, \ 0x53f84000, +/* + * Generic timer support + */ +#ifdef CONFIG_MX31_CLK32 +#define CONFIG_SYS_TIMER_RATE CONFIG_MX31_CLK32 +#else +#define CONFIG_SYS_TIMER_RATE 32768 +#endif + #endif /* __ASM_ARCH_MX31_IMX_REGS_H */ -- cgit v1.2.1 From 816264fc6672dbb7c7b22ad9e67b8d0056873394 Mon Sep 17 00:00:00 2001 From: Andrew Ruder Date: Tue, 12 Aug 2014 09:26:01 -0500 Subject: arm: mx35: use common timer functions This patch moves mx35 to the common timer functions added in commit 8dfafdd - Introduce common timer functions The (removed) mx35 timer code (specifically __udelay()) could deadlock at the 32-bit boundary of get_ticks(). get_ticks() returned a 32-bit value cast up to a 64-bit value. If get_ticks() + tmo in __udelay() crossed the 32-bit boundary, the while condition became unconditionally true and locks the processor. Rather than patch the specific mx35 issues, simply move everything over to the common code. Signed-off-by: Andrew Ruder Cc: Marek Vasut Cc: Stefano Babic --- arch/arm/cpu/arm1136/mx35/timer.c | 83 ------------------------------- arch/arm/include/asm/arch-mx35/imx-regs.h | 12 +++++ 2 files changed, 12 insertions(+), 83 deletions(-) diff --git a/arch/arm/cpu/arm1136/mx35/timer.c b/arch/arm/cpu/arm1136/mx35/timer.c index cc6166f938..4edf533e2a 100644 --- a/arch/arm/cpu/arm1136/mx35/timer.c +++ b/arch/arm/cpu/arm1136/mx35/timer.c @@ -9,43 +9,17 @@ #include #include -#include #include #include -#include DECLARE_GLOBAL_DATA_PTR; -#define timestamp (gd->arch.tbl) -#define lastinc (gd->arch.lastinc) - /* General purpose timers bitfields */ #define GPTCR_SWR (1<<15) /* Software reset */ #define GPTCR_FRR (1<<9) /* Freerun / restart */ #define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */ #define GPTCR_TEN (1) /* Timer enable */ -/* - * "time" is measured in 1 / CONFIG_SYS_HZ seconds, - * "tick" is internal timer period - */ -/* ~0.4% error - measured with stop-watch on 100s boot-delay */ -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, MXC_CLK32); - - return tick; -} - -static inline unsigned long long us_to_tick(unsigned long long us) -{ - us = us * MXC_CLK32 + 999999; - do_div(us, 1000000); - - return us; -} - /* * nothing really to do with interrupts, just starts up a counter. * The 32KHz 32-bit timer overruns in 134217 seconds @@ -71,60 +45,3 @@ int timer_init(void) return 0; } - -unsigned long long get_ticks(void) -{ - struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR; - ulong now = readl(&gpt->counter); /* current tick value */ - - if (now >= lastinc) { - /* - * normal mode (non roll) - * move stamp forward with absolut diff ticks - */ - timestamp += (now - lastinc); - } else { - /* we have rollover of incrementer */ - timestamp += (0xFFFFFFFF - lastinc) + now; - } - lastinc = now; - return timestamp; -} - -ulong get_timer_masked(void) -{ - /* - * get_ticks() returns a long long (64 bit), it wraps in - * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~ - * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in - * 5 * 10^6 days - long enough. - */ - return tick_to_time(get_ticks()); -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* delay x useconds AND preserve advance timstamp value */ -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - ulong tmo; - - tmo = us_to_tick(usec); - tmp = get_ticks() + tmo; /* get current timestamp */ - - while (get_ticks() < tmp) /* loop till event */ - /*NOP*/; -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return MXC_CLK32; -} diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index b5300291a9..28a47ed44d 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -372,4 +372,16 @@ struct aips_regs { #define CCM_RCSR_NF_16BIT_SEL (1 << 14) #endif + +/* + * Generic timer support + */ +#ifdef CONFIG_MX35_CLK32 +#define CONFIG_SYS_TIMER_RATE CONFIG_MX35_CLK32 +#else +#define CONFIG_SYS_TIMER_RATE 32768 +#endif + +#define CONFIG_SYS_TIMER_COUNTER (GPT1_BASE_ADDR+36) + #endif /* __ASM_ARCH_MX35_H */ -- cgit v1.2.1 From 72d7beabf72867da0a2e4dd37381cc3838ca8316 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Fri, 12 Sep 2014 13:06:35 +0200 Subject: mtd: nand: add Freescale vf610_nfc driver This adds initial support for Freescale NFC (NAND Flash Controller) found in ARM Vybrid SoC's, Power Architecture MPC5125 and others. The driver is called vf610_nfc since this is the first supported and tested hardware platform supported by the driver. Signed-off-by: Stefan Agner Acked-by: Bill Pringlemeir --- drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/vf610_nfc.c | 724 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 725 insertions(+) create mode 100644 drivers/mtd/nand/vf610_nfc.c diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index bf1312a373..eef86d1eca 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o obj-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o +obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o obj-$(CONFIG_NAND_MXC) += mxc_nand.o obj-$(CONFIG_NAND_MXS) += mxs_nand.o obj-$(CONFIG_NAND_NDFC) += ndfc.o diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c new file mode 100644 index 0000000000..7feb3a7b1e --- /dev/null +++ b/drivers/mtd/nand/vf610_nfc.c @@ -0,0 +1,724 @@ +/* + * Copyright 2009-2014 Freescale Semiconductor, Inc. and others + * + * Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver. + * Ported to U-Boot by Stefan Agner + * Based on RFC driver posted on Kernel Mailing list by Bill Pringlemeir + * Jason ported to M54418TWR and MVFA5. + * Authors: Stefan Agner + * Bill Pringlemeir + * Shaohui Xie + * Jason Jin + * + * Based on original driver mpc5121_nfc.c. + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Limitations: + * - Untested on MPC5125 and M54418. + * - DMA not used. + * - 2K pages or less. + * - Only 2K page w. 64+OOB and hardware ECC. + */ + +#include +#include + +#include +#include +#include + +#include +#include +#include + +/* Register Offsets */ +#define NFC_FLASH_CMD1 0x3F00 +#define NFC_FLASH_CMD2 0x3F04 +#define NFC_COL_ADDR 0x3F08 +#define NFC_ROW_ADDR 0x3F0c +#define NFC_ROW_ADDR_INC 0x3F14 +#define NFC_FLASH_STATUS1 0x3F18 +#define NFC_FLASH_STATUS2 0x3F1c +#define NFC_CACHE_SWAP 0x3F28 +#define NFC_SECTOR_SIZE 0x3F2c +#define NFC_FLASH_CONFIG 0x3F30 +#define NFC_IRQ_STATUS 0x3F38 + +/* Addresses for NFC MAIN RAM BUFFER areas */ +#define NFC_MAIN_AREA(n) ((n) * 0x1000) + +#define PAGE_2K 0x0800 +#define OOB_64 0x0040 + +/* + * NFC_CMD2[CODE] values. See section: + * - 31.4.7 Flash Command Code Description, Vybrid manual + * - 23.8.6 Flash Command Sequencer, MPC5125 manual + * + * Briefly these are bitmasks of controller cycles. + */ +#define READ_PAGE_CMD_CODE 0x7EE0 +#define PROGRAM_PAGE_CMD_CODE 0x7FC0 +#define ERASE_CMD_CODE 0x4EC0 +#define READ_ID_CMD_CODE 0x4804 +#define RESET_CMD_CODE 0x4040 +#define STATUS_READ_CMD_CODE 0x4068 + +/* NFC ECC mode define */ +#define ECC_BYPASS 0 +#define ECC_45_BYTE 6 + +/*** Register Mask and bit definitions */ + +/* NFC_FLASH_CMD1 Field */ +#define CMD_BYTE2_MASK 0xFF000000 +#define CMD_BYTE2_SHIFT 24 + +/* NFC_FLASH_CM2 Field */ +#define CMD_BYTE1_MASK 0xFF000000 +#define CMD_BYTE1_SHIFT 24 +#define CMD_CODE_MASK 0x00FFFF00 +#define CMD_CODE_SHIFT 8 +#define BUFNO_MASK 0x00000006 +#define BUFNO_SHIFT 1 +#define START_BIT (1<<0) + +/* NFC_COL_ADDR Field */ +#define COL_ADDR_MASK 0x0000FFFF +#define COL_ADDR_SHIFT 0 + +/* NFC_ROW_ADDR Field */ +#define ROW_ADDR_MASK 0x00FFFFFF +#define ROW_ADDR_SHIFT 0 +#define ROW_ADDR_CHIP_SEL_RB_MASK 0xF0000000 +#define ROW_ADDR_CHIP_SEL_RB_SHIFT 28 +#define ROW_ADDR_CHIP_SEL_MASK 0x0F000000 +#define ROW_ADDR_CHIP_SEL_SHIFT 24 + +/* NFC_FLASH_STATUS2 Field */ +#define STATUS_BYTE1_MASK 0x000000FF + +/* NFC_FLASH_CONFIG Field */ +#define CONFIG_ECC_SRAM_ADDR_MASK 0x7FC00000 +#define CONFIG_ECC_SRAM_ADDR_SHIFT 22 +#define CONFIG_ECC_SRAM_REQ_BIT (1<<21) +#define CONFIG_DMA_REQ_BIT (1<<20) +#define CONFIG_ECC_MODE_MASK 0x000E0000 +#define CONFIG_ECC_MODE_SHIFT 17 +#define CONFIG_FAST_FLASH_BIT (1<<16) +#define CONFIG_16BIT (1<<7) +#define CONFIG_BOOT_MODE_BIT (1<<6) +#define CONFIG_ADDR_AUTO_INCR_BIT (1<<5) +#define CONFIG_BUFNO_AUTO_INCR_BIT (1<<4) +#define CONFIG_PAGE_CNT_MASK 0xF +#define CONFIG_PAGE_CNT_SHIFT 0 + +/* NFC_IRQ_STATUS Field */ +#define IDLE_IRQ_BIT (1<<29) +#define IDLE_EN_BIT (1<<20) +#define CMD_DONE_CLEAR_BIT (1<<18) +#define IDLE_CLEAR_BIT (1<<17) + +#define NFC_TIMEOUT (1000) + +/* ECC status placed at end of buffers. */ +#define ECC_SRAM_ADDR ((PAGE_2K+256-8) >> 3) +#define ECC_STATUS_MASK 0x80 +#define ECC_ERR_COUNT 0x3F + +/* + * ECC status is stored at NFC_CFG[ECCADD] +4 for little-endian + * and +7 for big-endian SOC. + */ +#ifdef CONFIG_VF610 +#define ECC_OFFSET 4 +#else +#define ECC_OFFSET 7 +#endif + +struct vf610_nfc { + struct mtd_info *mtd; + struct nand_chip chip; + void __iomem *regs; + uint column; + int spareonly; + int page; + /* Status and ID are in alternate locations. */ + int alt_buf; +#define ALT_BUF_ID 1 +#define ALT_BUF_STAT 2 + struct clk *clk; +}; + +#define mtd_to_nfc(_mtd) \ + (struct vf610_nfc *)((struct nand_chip *)_mtd->priv)->priv + +static u8 bbt_pattern[] = {'B', 'b', 't', '0' }; +static u8 mirror_pattern[] = {'1', 't', 'b', 'B' }; + +static struct nand_bbt_descr bbt_main_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | + NAND_BBT_2BIT | NAND_BBT_VERSION, + .offs = 11, + .len = 4, + .veroffs = 15, + .maxblocks = 4, + .pattern = bbt_pattern, +}; + +static struct nand_bbt_descr bbt_mirror_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | + NAND_BBT_2BIT | NAND_BBT_VERSION, + .offs = 11, + .len = 4, + .veroffs = 15, + .maxblocks = 4, + .pattern = mirror_pattern, +}; + +static struct nand_ecclayout vf610_nfc_ecc45 = { + .eccbytes = 45, + .eccpos = {19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63}, + .oobfree = { + {.offset = 8, + .length = 11} } +}; + +static inline u32 vf610_nfc_read(struct mtd_info *mtd, uint reg) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + + return readl(nfc->regs + reg); +} + +static inline void vf610_nfc_write(struct mtd_info *mtd, uint reg, u32 val) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + + writel(val, nfc->regs + reg); +} + +static inline void vf610_nfc_set(struct mtd_info *mtd, uint reg, u32 bits) +{ + vf610_nfc_write(mtd, reg, vf610_nfc_read(mtd, reg) | bits); +} + +static inline void vf610_nfc_clear(struct mtd_info *mtd, uint reg, u32 bits) +{ + vf610_nfc_write(mtd, reg, vf610_nfc_read(mtd, reg) & ~bits); +} + +static inline void vf610_nfc_set_field(struct mtd_info *mtd, u32 reg, + u32 mask, u32 shift, u32 val) +{ + vf610_nfc_write(mtd, reg, + (vf610_nfc_read(mtd, reg) & (~mask)) | val << shift); +} + +static inline void vf610_nfc_memcpy(void *dst, const void *src, size_t n) +{ + /* + * Use this accessor for the interal SRAM buffers. On ARM we can + * treat the SRAM buffer as if its memory, hence use memcpy + */ + memcpy(dst, src, n); +} + +/* Clear flags for upcoming command */ +static inline void vf610_nfc_clear_status(void __iomem *regbase) +{ + void __iomem *reg = regbase + NFC_IRQ_STATUS; + u32 tmp = __raw_readl(reg); + tmp |= CMD_DONE_CLEAR_BIT | IDLE_CLEAR_BIT; + __raw_writel(tmp, reg); +} + +/* Wait for complete operation */ +static inline void vf610_nfc_done(struct mtd_info *mtd) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + uint start; + + /* + * Barrier is needed after this write. This write need + * to be done before reading the next register the first + * time. + * vf610_nfc_set implicates such a barrier by using writel + * to write to the register. + */ + vf610_nfc_set(mtd, NFC_FLASH_CMD2, START_BIT); + + start = get_timer(0); + + while (!(vf610_nfc_read(mtd, NFC_IRQ_STATUS) & IDLE_IRQ_BIT)) { + if (get_timer(start) > NFC_TIMEOUT) { + printf("Timeout while waiting for !BUSY.\n"); + return; + } + } + vf610_nfc_clear_status(nfc->regs); +} + +static u8 vf610_nfc_get_id(struct mtd_info *mtd, int col) +{ + u32 flash_id; + + if (col < 4) { + flash_id = vf610_nfc_read(mtd, NFC_FLASH_STATUS1); + return (flash_id >> (3-col)*8) & 0xff; + } else { + flash_id = vf610_nfc_read(mtd, NFC_FLASH_STATUS2); + return flash_id >> 24; + } +} + +static u8 vf610_nfc_get_status(struct mtd_info *mtd) +{ + return vf610_nfc_read(mtd, NFC_FLASH_STATUS2) & STATUS_BYTE1_MASK; +} + +/* Single command */ +static void vf610_nfc_send_command(void __iomem *regbase, u32 cmd_byte1, + u32 cmd_code) +{ + void __iomem *reg = regbase + NFC_FLASH_CMD2; + u32 tmp; + vf610_nfc_clear_status(regbase); + + tmp = __raw_readl(reg); + tmp &= ~(CMD_BYTE1_MASK | CMD_CODE_MASK | BUFNO_MASK); + tmp |= cmd_byte1 << CMD_BYTE1_SHIFT; + tmp |= cmd_code << CMD_CODE_SHIFT; + __raw_writel(tmp, reg); +} + +/* Two commands */ +static void vf610_nfc_send_commands(void __iomem *regbase, u32 cmd_byte1, + u32 cmd_byte2, u32 cmd_code) +{ + void __iomem *reg = regbase + NFC_FLASH_CMD1; + u32 tmp; + vf610_nfc_send_command(regbase, cmd_byte1, cmd_code); + + tmp = __raw_readl(reg); + tmp &= ~CMD_BYTE2_MASK; + tmp |= cmd_byte2 << CMD_BYTE2_SHIFT; + __raw_writel(tmp, reg); +} + +static void vf610_nfc_addr_cycle(struct mtd_info *mtd, int column, int page) +{ + if (column != -1) { + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + if (nfc->chip.options | NAND_BUSWIDTH_16) + column = column/2; + vf610_nfc_set_field(mtd, NFC_COL_ADDR, COL_ADDR_MASK, + COL_ADDR_SHIFT, column); + } + if (page != -1) + vf610_nfc_set_field(mtd, NFC_ROW_ADDR, ROW_ADDR_MASK, + ROW_ADDR_SHIFT, page); +} + +/* Send command to NAND chip */ +static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, + int column, int page) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + + nfc->column = max(column, 0); + nfc->spareonly = 0; + nfc->alt_buf = 0; + + switch (command) { + case NAND_CMD_PAGEPROG: + nfc->page = -1; + vf610_nfc_send_commands(nfc->regs, NAND_CMD_SEQIN, + command, PROGRAM_PAGE_CMD_CODE); + vf610_nfc_addr_cycle(mtd, column, page); + break; + + case NAND_CMD_RESET: + vf610_nfc_send_command(nfc->regs, command, RESET_CMD_CODE); + break; + /* + * NFC does not support sub-page reads and writes, + * so emulate them using full page transfers. + */ + case NAND_CMD_READOOB: + nfc->spareonly = 1; + case NAND_CMD_SEQIN: /* Pre-read for partial writes. */ + case NAND_CMD_READ0: + column = 0; + /* Already read? */ + if (nfc->page == page) + return; + nfc->page = page; + vf610_nfc_send_commands(nfc->regs, NAND_CMD_READ0, + NAND_CMD_READSTART, READ_PAGE_CMD_CODE); + vf610_nfc_addr_cycle(mtd, column, page); + break; + + case NAND_CMD_ERASE1: + if (nfc->page == page) + nfc->page = -1; + vf610_nfc_send_commands(nfc->regs, command, + NAND_CMD_ERASE2, ERASE_CMD_CODE); + vf610_nfc_addr_cycle(mtd, column, page); + break; + + case NAND_CMD_READID: + nfc->alt_buf = ALT_BUF_ID; + vf610_nfc_send_command(nfc->regs, command, READ_ID_CMD_CODE); + break; + + case NAND_CMD_STATUS: + nfc->alt_buf = ALT_BUF_STAT; + vf610_nfc_send_command(nfc->regs, command, + STATUS_READ_CMD_CODE); + break; + default: + return; + } + + vf610_nfc_done(mtd); +} + +static inline void vf610_nfc_read_spare(struct mtd_info *mtd, void *buf, + int len) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + + len = min(mtd->oobsize, (uint)len); + if (len > 0) + vf610_nfc_memcpy(buf, nfc->regs + mtd->writesize, len); +} + +/* Read data from NFC buffers */ +static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + uint c = nfc->column; + uint l; + + /* Handle main area */ + if (!nfc->spareonly) { + l = min((uint)len, mtd->writesize - c); + nfc->column += l; + + if (!nfc->alt_buf) + vf610_nfc_memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c, + l); + else + if (nfc->alt_buf & ALT_BUF_ID) + *buf = vf610_nfc_get_id(mtd, c); + else + *buf = vf610_nfc_get_status(mtd); + + buf += l; + len -= l; + } + + /* Handle spare area access */ + if (len) { + nfc->column += len; + vf610_nfc_read_spare(mtd, buf, len); + } +} + +/* Write data to NFC buffers */ +static void vf610_nfc_write_buf(struct mtd_info *mtd, const u_char *buf, + int len) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + uint c = nfc->column; + uint l; + + l = min((uint)len, mtd->writesize + mtd->oobsize - c); + nfc->column += l; + vf610_nfc_memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l); +} + +/* Read byte from NFC buffers */ +static u8 vf610_nfc_read_byte(struct mtd_info *mtd) +{ + u8 tmp; + vf610_nfc_read_buf(mtd, &tmp, sizeof(tmp)); + return tmp; +} + +/* Read word from NFC buffers */ +static u16 vf610_nfc_read_word(struct mtd_info *mtd) +{ + u16 tmp; + vf610_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp)); + return tmp; +} + +/* If not provided, upper layers apply a fixed delay. */ +static int vf610_nfc_dev_ready(struct mtd_info *mtd) +{ + /* NFC handles R/B internally; always ready. */ + return 1; +} + +/* + * This function supports Vybrid only (MPC5125 would have full RB and four CS) + */ +static void vf610_nfc_select_chip(struct mtd_info *mtd, int chip) +{ +#ifdef CONFIG_VF610 + u32 tmp = vf610_nfc_read(mtd, NFC_ROW_ADDR); + tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK); + tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT; + + if (chip == 0) + tmp |= 1 << ROW_ADDR_CHIP_SEL_SHIFT; + else if (chip == 1) + tmp |= 2 << ROW_ADDR_CHIP_SEL_SHIFT; + + vf610_nfc_write(mtd, NFC_ROW_ADDR, tmp); +#endif +} + +/* Count the number of 0's in buff upto max_bits */ +static inline int count_written_bits(uint8_t *buff, int size, int max_bits) +{ + uint32_t *buff32 = (uint32_t *)buff; + int k, written_bits = 0; + + for (k = 0; k < (size / 4); k++) { + written_bits += hweight32(~buff32[k]); + if (written_bits > max_bits) + break; + } + + return written_bits; +} + +static inline int vf610_nfc_correct_data(struct mtd_info *mtd, u_char *dat) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + u8 ecc_status; + u8 ecc_count; + int flip; + + ecc_status = __raw_readb(nfc->regs + ECC_SRAM_ADDR * 8 + ECC_OFFSET); + ecc_count = ecc_status & ECC_ERR_COUNT; + if (!(ecc_status & ECC_STATUS_MASK)) + return ecc_count; + + /* If 'ecc_count' zero or less then buffer is all 0xff or erased. */ + flip = count_written_bits(dat, nfc->chip.ecc.size, ecc_count); + + /* ECC failed. */ + if (flip > ecc_count) { + nfc->page = -1; + return -1; + } + + /* Erased page. */ + memset(dat, 0xff, nfc->chip.ecc.size); + return 0; +} + + +static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + int eccsize = chip->ecc.size; + int stat; + uint8_t *p = buf; + + + vf610_nfc_read_buf(mtd, p, eccsize); + + if (oob_required) + vf610_nfc_read_buf(mtd, chip->oob_poi, mtd->oobsize); + + stat = vf610_nfc_correct_data(mtd, p); + + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + + return 0; +} + +/* + * ECC will be calculated automatically + */ +static int vf610_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + vf610_nfc_write_buf(mtd, buf, mtd->writesize); + if (oob_required) + vf610_nfc_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + +struct vf610_nfc_config { + int hardware_ecc; + int width; + int flash_bbt; +}; + +static int vf610_nfc_nand_init(int devnum, void __iomem *addr) +{ + struct mtd_info *mtd = &nand_info[devnum]; + struct nand_chip *chip; + struct vf610_nfc *nfc; + int err = 0; + int page_sz; + struct vf610_nfc_config cfg = { + .hardware_ecc = 1, +#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT + .width = 16, +#else + .width = 8, +#endif + .flash_bbt = 1, + }; + + nfc = malloc(sizeof(*nfc)); + if (!nfc) { + printf(KERN_ERR "%s: Memory exhausted!\n", __func__); + return -ENOMEM; + } + + chip = &nfc->chip; + nfc->regs = addr; + + mtd->priv = chip; + chip->priv = nfc; + + if (cfg.width == 16) { + chip->options |= NAND_BUSWIDTH_16; + vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT); + } else { + chip->options &= ~NAND_BUSWIDTH_16; + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT); + } + + chip->dev_ready = vf610_nfc_dev_ready; + chip->cmdfunc = vf610_nfc_command; + chip->read_byte = vf610_nfc_read_byte; + chip->read_word = vf610_nfc_read_word; + chip->read_buf = vf610_nfc_read_buf; + chip->write_buf = vf610_nfc_write_buf; + chip->select_chip = vf610_nfc_select_chip; + + /* Bad block options. */ + if (cfg.flash_bbt) + chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_CREATE; + + /* Default to software ECC until flash ID. */ + vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, + CONFIG_ECC_MODE_MASK, + CONFIG_ECC_MODE_SHIFT, ECC_BYPASS); + + chip->bbt_td = &bbt_main_descr; + chip->bbt_md = &bbt_mirror_descr; + + page_sz = PAGE_2K + OOB_64; + page_sz += cfg.width == 16 ? 1 : 0; + vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz); + + /* Set configuration register. */ + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT); + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT); + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT); + vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT); + vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT); + + /* Enable Idle IRQ */ + vf610_nfc_set(mtd, NFC_IRQ_STATUS, IDLE_EN_BIT); + + /* PAGE_CNT = 1 */ + vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK, + CONFIG_PAGE_CNT_SHIFT, 1); + + /* Set ECC_STATUS offset */ + vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, + CONFIG_ECC_SRAM_ADDR_MASK, + CONFIG_ECC_SRAM_ADDR_SHIFT, ECC_SRAM_ADDR); + + /* first scan to find the device and get the page size */ + if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL)) { + err = -ENXIO; + goto error; + } + + chip->ecc.mode = NAND_ECC_SOFT; /* default */ + + page_sz = mtd->writesize + mtd->oobsize; + + /* Single buffer only, max 256 OOB minus ECC status */ + if (page_sz > PAGE_2K + 256 - 8) { + dev_err(nfc->dev, "Unsupported flash size\n"); + err = -ENXIO; + goto error; + } + page_sz += cfg.width == 16 ? 1 : 0; + vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz); + + if (cfg.hardware_ecc) { + if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) { + dev_err(nfc->dev, "Unsupported flash with hwecc\n"); + err = -ENXIO; + goto error; + } + + chip->ecc.layout = &vf610_nfc_ecc45; + + /* propagate ecc.layout to mtd_info */ + mtd->ecclayout = chip->ecc.layout; + chip->ecc.read_page = vf610_nfc_read_page; + chip->ecc.write_page = vf610_nfc_write_page; + chip->ecc.mode = NAND_ECC_HW; + + chip->ecc.bytes = 45; + chip->ecc.size = PAGE_2K; + chip->ecc.strength = 24; + + /* set ECC mode to 45 bytes OOB with 24 bits correction */ + vf610_nfc_set_field(mtd, NFC_FLASH_CONFIG, + CONFIG_ECC_MODE_MASK, + CONFIG_ECC_MODE_SHIFT, ECC_45_BYTE); + + /* Enable ECC_STATUS */ + vf610_nfc_set(mtd, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT); + } + + /* second phase scan */ + err = nand_scan_tail(mtd); + if (err) + return err; + + err = nand_register(devnum); + if (err) + return err; + + return 0; + +error: + return err; +} + +void board_nand_init(void) +{ + int err = vf610_nfc_nand_init(0, (void __iomem *)CONFIG_SYS_NAND_BASE); + if (err) + printf("VF610 NAND init failed (err %d)\n", err); +} -- cgit v1.2.1 From d6d07a9bec3bc30a58c45f8e6343c92dfef96fee Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Fri, 12 Sep 2014 13:06:36 +0200 Subject: arm: vf610: add NAND support for vf610twr This adds NAND support for the Vybrid tower system (TWR-VF65GS10) provided by the vf610_nfc driver. Full 16-Bit bus width is supported. Also an aditional config vf610twr_nand is introduced which gets the environment from NAND. However, booting U-Boot from NAND is not yet possible due to missing boot configuration block (BCB). Signed-off-by: Stefan Agner --- board/freescale/vf610twr/vf610twr.c | 47 ++++++++++++++++++++++++++++++++++--- configs/vf610twr_defconfig | 2 +- configs/vf610twr_nand_defconfig | 3 +++ include/configs/vf610twr.h | 46 +++++++++++++++++++++++++++++++++++- 4 files changed, 93 insertions(+), 5 deletions(-) create mode 100644 configs/vf610twr_nand_defconfig diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c index 54a9f2c7c3..4d0979632a 100644 --- a/board/freescale/vf610twr/vf610twr.c +++ b/board/freescale/vf610twr/vf610twr.c @@ -278,6 +278,39 @@ static void setup_iomux_i2c(void) imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads)); } +#ifdef CONFIG_NAND_VF610_NFC +static void setup_iomux_nfc(void) +{ + static const iomux_v3_cfg_t nfc_pads[] = { + VF610_PAD_PTD31__NF_IO15, + VF610_PAD_PTD30__NF_IO14, + VF610_PAD_PTD29__NF_IO13, + VF610_PAD_PTD28__NF_IO12, + VF610_PAD_PTD27__NF_IO11, + VF610_PAD_PTD26__NF_IO10, + VF610_PAD_PTD25__NF_IO9, + VF610_PAD_PTD24__NF_IO8, + VF610_PAD_PTD23__NF_IO7, + VF610_PAD_PTD22__NF_IO6, + VF610_PAD_PTD21__NF_IO5, + VF610_PAD_PTD20__NF_IO4, + VF610_PAD_PTD19__NF_IO3, + VF610_PAD_PTD18__NF_IO2, + VF610_PAD_PTD17__NF_IO1, + VF610_PAD_PTD16__NF_IO0, + VF610_PAD_PTB24__NF_WE_B, + VF610_PAD_PTB25__NF_CE0_B, + VF610_PAD_PTB27__NF_RE_B, + VF610_PAD_PTC26__NF_RB_B, + VF610_PAD_PTC27__NF_ALE, + VF610_PAD_PTC28__NF_CLE + }; + + imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads)); +} +#endif + + static void setup_iomux_qspi(void) { static const iomux_v3_cfg_t qspi0_pads[] = { @@ -354,6 +387,8 @@ static void clock_init(void) CCM_CCGR7_SDHC1_CTRL_MASK); clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK, CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK, + CCM_CCGR10_NFC_CTRL_MASK); clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN, ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT); @@ -373,14 +408,17 @@ static void clock_init(void) CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) | CCM_CACRR_ARM_CLK_DIV(0)); clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK, - CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3)); + CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3) | + CCM_CSCMR1_NFC_CLK_SEL(0)); clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK, CCM_CSCDR1_RMII_CLK_EN); clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK, - CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0)); + CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) | + CCM_CSCDR2_NFC_EN); clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK, CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) | - CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3)); + CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3) | + CCM_CSCDR3_NFC_PRE_DIV(5)); clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK, CCM_CSCMR2_RMII_CLK_SEL(0)); } @@ -411,6 +449,9 @@ int board_early_init_f(void) setup_iomux_enet(); setup_iomux_i2c(); setup_iomux_qspi(); +#ifdef CONFIG_NAND_VF610_NFC + setup_iomux_nfc(); +#endif return 0; } diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig index 10e6432bb4..7de374a406 100644 --- a/configs/vf610twr_defconfig +++ b/configs/vf610twr_defconfig @@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC" CONFIG_ARM=y CONFIG_TARGET_VF610TWR=y diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig new file mode 100644 index 0000000000..e78db26ff6 --- /dev/null +++ b/configs/vf610twr_nand_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_NAND" +CONFIG_ARM=y +CONFIG_TARGET_VF610TWR=y diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 0342550412..6fd0b173eb 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -14,6 +14,7 @@ #define CONFIG_VF610 +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -44,6 +45,41 @@ #undef CONFIG_CMD_IMLS +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS + +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_VF610_NFC +#define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_USE_ARCH_MEMCPY +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR + +/* UBI */ +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +/* Dynamic MTD partition support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define MTDIDS_DEFAULT "nand0=fsl_nfc" +#define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \ + "128k(vf-bcb)ro," \ + "1408k(u-boot)ro," \ + "512k(u-boot-env)," \ + "4m(kernel)," \ + "512k(fdt)," \ + "-(rootfs)" +#endif + #define CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 @@ -218,11 +254,19 @@ /* FLASH and environment organization */ #define CONFIG_SYS_NO_FLASH +#ifdef CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET (12 * 64 * 1024) #define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +#ifdef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (64 * 2048) +#define CONFIG_ENV_SECT_SIZE (64 * 2048) +#define CONFIG_ENV_RANGE (512 * 1024) +#define CONFIG_ENV_OFFSET 0x180000 +#endif #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ -- cgit v1.2.1 From 152adee1b6174611903b81fa8d3b9797d70b0ca1 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 15 Sep 2014 14:59:16 +0800 Subject: imx:mx6sxsabresd: change CONFIG_SYS_FSL_ESDHC_ADDR Define CONFIG_SYS_FSL_ESDHC_ADDR using USDHC4_BASE_ADDR which is used in board_mmc_init. If board_mmc_init failed, cpu_mmc_init->fsl_esdhc_mmc_init will use CONFIG_SYS_FSL_ESDHC_ADDR to initialize sdhc. So set this macro to correct value. Signed-off-by: Peng Fan --- include/configs/mx6sxsabresd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index b92d9443d4..fd74c6980d 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -159,7 +159,7 @@ /* MMC Configuration */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR #define CONFIG_MMC #define CONFIG_CMD_MMC -- cgit v1.2.1 From 95083b3a0887e1653df04ef4e1aa3c42920ffa11 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 15 Sep 2014 14:59:17 +0800 Subject: imx:mx6qarm2: change CONFIG_SYS_FSL_ESDHC_ADDR Define CONFIG_SYS_FSL_ESDHC_ADDR using USDHC4_BASE_ADDR. USDHC3 and USDHC4 are both initialized in board_mmc_init. There is no restriction on USDHC3 addr or USDHC4 addr should be assigned to CONFIG_SYS_FSL_ESDHC_ADDR. So, just choose USDHC4_BASE_ADDR to avoid errors when fsl_esdhc_mmc_init is invoked. Signed-off-by: Peng Fan --- include/configs/mx6qarm2.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 35c0a85080..e2469a1165 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -37,7 +37,7 @@ /* MMC Configs */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_MMC -- cgit v1.2.1 From 08129d618c3906a696bdaf758bd7e923ea43eced Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 15 Sep 2014 14:59:18 +0800 Subject: imx:mx6slevk: change CONFIG_SYS_FSL_ESDHC_ADDR Define CONFIG_SYS_FSL_ESDHC_ADDR using USDHC2_BASE_ADDR which is used in board_mmc_init. Signed-off-by: Peng Fan --- include/configs/mx6slevk.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 194d7bdb76..55b983c7ad 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -40,7 +40,7 @@ /* MMC Configs */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR #define CONFIG_MMC #define CONFIG_CMD_MMC -- cgit v1.2.1 From bcaa075a637af55e2d59e7333eddb250758bd545 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 13 Sep 2014 18:21:35 -0300 Subject: mx6sxsabresd: Staticize i2c_pad_info1 i2c_pad_info1 is only used locally, so it can be made static. Fix the following sparse warning: board/freescale/mx6sxsabresd/mx6sxsabresd.c:160:22: warning: symbol 'i2c_pad_info1' was not declared. Should it be static? Signed-off-by: Fabio Estevam --- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 5eaec1bdb1..68d37184a3 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -157,7 +157,7 @@ int board_eth_init(bd_t *bis) #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC */ -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC, .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC, -- cgit v1.2.1 From 067a659317639187fd170f73b10dfc5c2a7df9da Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 13 Sep 2014 18:21:36 -0300 Subject: mx6qsabreauto: Staticize when possible Turn all local symbols into static in order to make sparse happy. Signed-off-by: Fabio Estevam --- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 928dadf809..dd6d2a660f 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -50,12 +50,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t const uart4_pads[] = { +static iomux_v3_cfg_t const uart4_pads[] = { MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t const enet_pads[] = { +static iomux_v3_cfg_t const enet_pads[] = { MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -74,7 +74,7 @@ iomux_v3_cfg_t const enet_pads[] = { }; /* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */ -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC, .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, @@ -91,7 +91,7 @@ struct i2c_pads_info i2c_pad_info1 = { * I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor, * Compass Sensor, Accelerometer, Res Touch */ -struct i2c_pads_info i2c_pad_info2 = { +static struct i2c_pads_info i2c_pad_info2 = { .scl = { .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC, .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC, @@ -104,11 +104,11 @@ struct i2c_pads_info i2c_pad_info2 = { } }; -iomux_v3_cfg_t const i2c3_pads[] = { +static iomux_v3_cfg_t const i2c3_pads[] = { MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -iomux_v3_cfg_t const port_exp[] = { +static iomux_v3_cfg_t const port_exp[] = { MX6_PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), }; @@ -117,7 +117,7 @@ static void setup_iomux_enet(void) imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); } -iomux_v3_cfg_t const usdhc3_pads[] = { +static iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -138,7 +138,7 @@ static void setup_iomux_uart(void) } #ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg usdhc_cfg[1] = { +static struct fsl_esdhc_cfg usdhc_cfg[1] = { {USDHC3_BASE_ADDR}, }; -- cgit v1.2.1 From 0fdfafd225a0cead05a0b332f189c2f667b5f1d6 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Tue, 16 Sep 2014 16:02:00 +0200 Subject: imx: Fix warning by building vf610twr_nand commit d6d07a9b... arm: vf610: add NAND support for vf610twr generates the following warnings: WARNING: no status info for 'vf610twr_nand' WARNING: no maintainers for 'vf610twr_nand'WARNING: no status info for 'vf610twr_nand' This is due to the fact that vf610twr_nand_defconfig has no Maintainer. This patch proposed Alison as Maintainer and fix it. Signed-off-by: Stefano Babic Acked-by: Alison Wang CC: Stefan Agner --- board/freescale/vf610twr/MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/board/freescale/vf610twr/MAINTAINERS b/board/freescale/vf610twr/MAINTAINERS index 56a09c9ad9..f2997f05c3 100644 --- a/board/freescale/vf610twr/MAINTAINERS +++ b/board/freescale/vf610twr/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/freescale/vf610twr/ F: include/configs/vf610twr.h F: configs/vf610twr_defconfig +F: configs/vf610twr_nand_defconfig -- cgit v1.2.1 From e425436ca83e3c285000d53acc1700b63d39893b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 20 Sep 2014 20:05:36 -0300 Subject: cm_fx6: Remove CONFIG_NETMASK We should not hardcode CONFIG_NETMASK in the config file. Signed-off-by: Fabio Estevam Acked-by: Igor Grinberg Acked-by: Nikita Kiryanov --- include/configs/cm_fx6.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 10d02b4e18..7cf241e31d 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -222,7 +222,6 @@ #define CONFIG_MII #define CONFIG_ETHPRIME "FEC0" #define CONFIG_ARP_TIMEOUT 200UL -#define CONFIG_NETMASK 255.255.255.0 #define CONFIG_NET_RETRY_COUNT 5 /* USB */ -- cgit v1.2.1 From 9992792be07517647fa2f07a54263d7051ff420f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 16 Sep 2014 20:03:40 -0300 Subject: mx51evk: Fix CONFIG_SYS_FSL_ESDHC_ADDR We should pass the SDHC1 base address into CONFIG_SYS_FSL_ESDHC_ADDR. Signed-off-by: Fabio Estevam --- include/configs/mx51evk.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index b389475ebe..b0d401c928 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -69,7 +69,7 @@ * MMC Configs * */ #define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_NUM 2 #define CONFIG_MMC -- cgit v1.2.1 From 7a56bddd7fb9fe27c775cadd18ebde6f883d7cff Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 16 Sep 2014 20:03:41 -0300 Subject: mx51evk: Add generic board support Let's enable CONFIG_SYS_GENERIC_BOARD in order to get rid of warnings related to generic board not being supported. Signed-off-by: Fabio Estevam --- include/configs/mx51evk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index b0d401c928..d6e8ec4e13 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -26,6 +26,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_OF_LIBFDT -- cgit v1.2.1 From 05d1c24517726c73fabb16c483a5cbd3737ed2a6 Mon Sep 17 00:00:00 2001 From: Guillaume GARDET Date: Thu, 11 Sep 2014 11:59:52 +0200 Subject: imx: nitrogen6x: Make use of both uSD and SD slots to load script or kernel on Sabrelite board Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. This patch makes use of both slots instead of only one. Signed-off-by: Guillaume GARDET Cc: Stefano Babic Cc: Eric Nelson Reviewed-by: Eric Nelson Acked-by: Eric Nelson Reviewed-by: Eric Nelson Acked-by: Eric Nelson --- include/configs/nitrogen6x.h | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index d4b0ac9fdb..2a1eb3b773 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -186,7 +186,7 @@ "fdt_addr=0x18000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ - "mmcdev=0\0" \ + "mmcdevs=0 1\0" \ "mmcpart=1\0" \ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -238,16 +238,19 @@ "fi;\0" #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" + "for mmcdev in ${mmcdevs}; do " \ + "mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi; " \ + "fi; " \ + "fi; " \ + "done; " \ + "run netboot; " #else #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc1\0" \ -- cgit v1.2.1 From 7972913512568bc48ca6ea1f2b1cc25db61275ff Mon Sep 17 00:00:00 2001 From: Nitin Garg Date: Mon, 15 Sep 2014 08:56:46 -0500 Subject: imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board Provide cgtqmx6eval board its own variant of ddr setup config file. Move board/freescale/imx/ddr/ mx6q_4x_mt41j128.cfg to board/freescale/mx6sabresd/ as this is was designed for the mx6sabresd board. Signed-off-by: Nitin Garg Acked-by: Stefano Babic --- board/congatec/cgtqmx6eval/imximage.cfg | 169 ++++++++++++++++++++++++ board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 169 ------------------------ board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg | 169 ++++++++++++++++++++++++ configs/cgtqmx6qeval_defconfig | 2 +- configs/mx6qsabresd_defconfig | 2 +- 5 files changed, 340 insertions(+), 171 deletions(-) create mode 100644 board/congatec/cgtqmx6eval/imximage.cfg delete mode 100644 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg create mode 100644 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg diff --git a/board/congatec/cgtqmx6eval/imximage.cfg b/board/congatec/cgtqmx6eval/imximage.cfg new file mode 100644 index 0000000000..bb6c60b4c3 --- /dev/null +++ b/board/congatec/cgtqmx6eval/imximage.cfg @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020e05a8 0x00000030 +DATA 4 0x020e05b0 0x00000030 +DATA 4 0x020e0524 0x00000030 +DATA 4 0x020e051c 0x00000030 + +DATA 4 0x020e0518 0x00000030 +DATA 4 0x020e050c 0x00000030 +DATA 4 0x020e05b8 0x00000030 +DATA 4 0x020e05c0 0x00000030 + +DATA 4 0x020e05ac 0x00020030 +DATA 4 0x020e05b4 0x00020030 +DATA 4 0x020e0528 0x00020030 +DATA 4 0x020e0520 0x00020030 + +DATA 4 0x020e0514 0x00020030 +DATA 4 0x020e0510 0x00020030 +DATA 4 0x020e05bc 0x00020030 +DATA 4 0x020e05c4 0x00020030 + +DATA 4 0x020e056c 0x00020030 +DATA 4 0x020e0578 0x00020030 +DATA 4 0x020e0588 0x00020030 +DATA 4 0x020e0594 0x00020030 + +DATA 4 0x020e057c 0x00020030 +DATA 4 0x020e0590 0x00003000 +DATA 4 0x020e0598 0x00003000 +DATA 4 0x020e058c 0x00000000 + +DATA 4 0x020e059c 0x00003030 +DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e0784 0x00000030 +DATA 4 0x020e0788 0x00000030 + +DATA 4 0x020e0794 0x00000030 +DATA 4 0x020e079c 0x00000030 +DATA 4 0x020e07a0 0x00000030 +DATA 4 0x020e07a4 0x00000030 + +DATA 4 0x020e07a8 0x00000030 +DATA 4 0x020e0748 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e0750 0x00020000 + +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0774 0x00020000 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0798 0x000C0000 + +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 + +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 + +DATA 4 0x021b0018 0x00081740 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b000c 0x555A7974 +DATA 4 0x021b0010 0xDB538F64 +DATA 4 0x021b0014 0x01FF00DB +DATA 4 0x021b002c 0x000026D2 + +DATA 4 0x021b0030 0x005A1023 +DATA 4 0x021b0008 0x09444040 +DATA 4 0x021b0004 0x00025576 +DATA 4 0x021b0040 0x00000027 +DATA 4 0x021b0000 0x831A0000 + +DATA 4 0x021b001c 0x04088032 +DATA 4 0x021b001c 0x0408803A +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x0000803B +DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00428039 +DATA 4 0x021b001c 0x19308030 +DATA 4 0x021b001c 0x19308038 + +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b001c 0x04008048 +DATA 4 0x021b0800 0xA1380003 +DATA 4 0x021b4800 0xA1380003 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00022227 +DATA 4 0x021b4818 0x00022227 + +DATA 4 0x021b083c 0x434B0350 +DATA 4 0x021b0840 0x034C0359 +DATA 4 0x021b483c 0x434B0350 +DATA 4 0x021b4840 0x03650348 +DATA 4 0x021b0848 0x4436383B +DATA 4 0x021b4848 0x39393341 +DATA 4 0x021b0850 0x35373933 +DATA 4 0x021b4850 0x48254A36 + +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F + +DATA 4 0x021b480c 0x00440044 +DATA 4 0x021b4810 0x00440044 + +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 + +DATA 4 0x021b001c 0x00000000 +DATA 4 0x021b0404 0x00011006 + +/* set the default clock gate to save power */ +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +/* + * Setup CCM_CCOSR register as follows: + * + * cko1_en = 1 --> CKO1 enabled + * cko1_div = 111 --> divide by 8 + * cko1_sel = 1011 --> ahb_clk_root + * + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz + */ +DATA 4 0x020c4060 0x000000fb diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg deleted file mode 100644 index bb6c60b4c3..0000000000 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. - * Jason Liu - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM sd - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -DATA 4 0x020e05a8 0x00000030 -DATA 4 0x020e05b0 0x00000030 -DATA 4 0x020e0524 0x00000030 -DATA 4 0x020e051c 0x00000030 - -DATA 4 0x020e0518 0x00000030 -DATA 4 0x020e050c 0x00000030 -DATA 4 0x020e05b8 0x00000030 -DATA 4 0x020e05c0 0x00000030 - -DATA 4 0x020e05ac 0x00020030 -DATA 4 0x020e05b4 0x00020030 -DATA 4 0x020e0528 0x00020030 -DATA 4 0x020e0520 0x00020030 - -DATA 4 0x020e0514 0x00020030 -DATA 4 0x020e0510 0x00020030 -DATA 4 0x020e05bc 0x00020030 -DATA 4 0x020e05c4 0x00020030 - -DATA 4 0x020e056c 0x00020030 -DATA 4 0x020e0578 0x00020030 -DATA 4 0x020e0588 0x00020030 -DATA 4 0x020e0594 0x00020030 - -DATA 4 0x020e057c 0x00020030 -DATA 4 0x020e0590 0x00003000 -DATA 4 0x020e0598 0x00003000 -DATA 4 0x020e058c 0x00000000 - -DATA 4 0x020e059c 0x00003030 -DATA 4 0x020e05a0 0x00003030 -DATA 4 0x020e0784 0x00000030 -DATA 4 0x020e0788 0x00000030 - -DATA 4 0x020e0794 0x00000030 -DATA 4 0x020e079c 0x00000030 -DATA 4 0x020e07a0 0x00000030 -DATA 4 0x020e07a4 0x00000030 - -DATA 4 0x020e07a8 0x00000030 -DATA 4 0x020e0748 0x00000030 -DATA 4 0x020e074c 0x00000030 -DATA 4 0x020e0750 0x00020000 - -DATA 4 0x020e0758 0x00000000 -DATA 4 0x020e0774 0x00020000 -DATA 4 0x020e078c 0x00000030 -DATA 4 0x020e0798 0x000C0000 - -DATA 4 0x021b081c 0x33333333 -DATA 4 0x021b0820 0x33333333 -DATA 4 0x021b0824 0x33333333 -DATA 4 0x021b0828 0x33333333 - -DATA 4 0x021b481c 0x33333333 -DATA 4 0x021b4820 0x33333333 -DATA 4 0x021b4824 0x33333333 -DATA 4 0x021b4828 0x33333333 - -DATA 4 0x021b0018 0x00081740 - -DATA 4 0x021b001c 0x00008000 -DATA 4 0x021b000c 0x555A7974 -DATA 4 0x021b0010 0xDB538F64 -DATA 4 0x021b0014 0x01FF00DB -DATA 4 0x021b002c 0x000026D2 - -DATA 4 0x021b0030 0x005A1023 -DATA 4 0x021b0008 0x09444040 -DATA 4 0x021b0004 0x00025576 -DATA 4 0x021b0040 0x00000027 -DATA 4 0x021b0000 0x831A0000 - -DATA 4 0x021b001c 0x04088032 -DATA 4 0x021b001c 0x0408803A -DATA 4 0x021b001c 0x00008033 -DATA 4 0x021b001c 0x0000803B -DATA 4 0x021b001c 0x00428031 -DATA 4 0x021b001c 0x00428039 -DATA 4 0x021b001c 0x19308030 -DATA 4 0x021b001c 0x19308038 - -DATA 4 0x021b001c 0x04008040 -DATA 4 0x021b001c 0x04008048 -DATA 4 0x021b0800 0xA1380003 -DATA 4 0x021b4800 0xA1380003 -DATA 4 0x021b0020 0x00005800 -DATA 4 0x021b0818 0x00022227 -DATA 4 0x021b4818 0x00022227 - -DATA 4 0x021b083c 0x434B0350 -DATA 4 0x021b0840 0x034C0359 -DATA 4 0x021b483c 0x434B0350 -DATA 4 0x021b4840 0x03650348 -DATA 4 0x021b0848 0x4436383B -DATA 4 0x021b4848 0x39393341 -DATA 4 0x021b0850 0x35373933 -DATA 4 0x021b4850 0x48254A36 - -DATA 4 0x021b080c 0x001F001F -DATA 4 0x021b0810 0x001F001F - -DATA 4 0x021b480c 0x00440044 -DATA 4 0x021b4810 0x00440044 - -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b48b8 0x00000800 - -DATA 4 0x021b001c 0x00000000 -DATA 4 0x021b0404 0x00011006 - -/* set the default clock gate to save power */ -DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC03 -DATA 4 0x020c4070 0x0FFFC000 -DATA 4 0x020c4074 0x3FF00000 -DATA 4 0x020c4078 0x00FFF300 -DATA 4 0x020c407c 0x0F0000C3 -DATA 4 0x020c4080 0x000003FF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4 0x020e0010 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4 0x020e0018 0x007F007F -DATA 4 0x020e001c 0x007F007F - -/* - * Setup CCM_CCOSR register as follows: - * - * cko1_en = 1 --> CKO1 enabled - * cko1_div = 111 --> divide by 8 - * cko1_sel = 1011 --> ahb_clk_root - * - * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz - */ -DATA 4 0x020c4060 0x000000fb diff --git a/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg b/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg new file mode 100644 index 0000000000..bb6c60b4c3 --- /dev/null +++ b/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020e05a8 0x00000030 +DATA 4 0x020e05b0 0x00000030 +DATA 4 0x020e0524 0x00000030 +DATA 4 0x020e051c 0x00000030 + +DATA 4 0x020e0518 0x00000030 +DATA 4 0x020e050c 0x00000030 +DATA 4 0x020e05b8 0x00000030 +DATA 4 0x020e05c0 0x00000030 + +DATA 4 0x020e05ac 0x00020030 +DATA 4 0x020e05b4 0x00020030 +DATA 4 0x020e0528 0x00020030 +DATA 4 0x020e0520 0x00020030 + +DATA 4 0x020e0514 0x00020030 +DATA 4 0x020e0510 0x00020030 +DATA 4 0x020e05bc 0x00020030 +DATA 4 0x020e05c4 0x00020030 + +DATA 4 0x020e056c 0x00020030 +DATA 4 0x020e0578 0x00020030 +DATA 4 0x020e0588 0x00020030 +DATA 4 0x020e0594 0x00020030 + +DATA 4 0x020e057c 0x00020030 +DATA 4 0x020e0590 0x00003000 +DATA 4 0x020e0598 0x00003000 +DATA 4 0x020e058c 0x00000000 + +DATA 4 0x020e059c 0x00003030 +DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e0784 0x00000030 +DATA 4 0x020e0788 0x00000030 + +DATA 4 0x020e0794 0x00000030 +DATA 4 0x020e079c 0x00000030 +DATA 4 0x020e07a0 0x00000030 +DATA 4 0x020e07a4 0x00000030 + +DATA 4 0x020e07a8 0x00000030 +DATA 4 0x020e0748 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e0750 0x00020000 + +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0774 0x00020000 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0798 0x000C0000 + +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 + +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 + +DATA 4 0x021b0018 0x00081740 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b000c 0x555A7974 +DATA 4 0x021b0010 0xDB538F64 +DATA 4 0x021b0014 0x01FF00DB +DATA 4 0x021b002c 0x000026D2 + +DATA 4 0x021b0030 0x005A1023 +DATA 4 0x021b0008 0x09444040 +DATA 4 0x021b0004 0x00025576 +DATA 4 0x021b0040 0x00000027 +DATA 4 0x021b0000 0x831A0000 + +DATA 4 0x021b001c 0x04088032 +DATA 4 0x021b001c 0x0408803A +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x0000803B +DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00428039 +DATA 4 0x021b001c 0x19308030 +DATA 4 0x021b001c 0x19308038 + +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b001c 0x04008048 +DATA 4 0x021b0800 0xA1380003 +DATA 4 0x021b4800 0xA1380003 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00022227 +DATA 4 0x021b4818 0x00022227 + +DATA 4 0x021b083c 0x434B0350 +DATA 4 0x021b0840 0x034C0359 +DATA 4 0x021b483c 0x434B0350 +DATA 4 0x021b4840 0x03650348 +DATA 4 0x021b0848 0x4436383B +DATA 4 0x021b4848 0x39393341 +DATA 4 0x021b0850 0x35373933 +DATA 4 0x021b4850 0x48254A36 + +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F + +DATA 4 0x021b480c 0x00440044 +DATA 4 0x021b4810 0x00440044 + +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 + +DATA 4 0x021b001c 0x00000000 +DATA 4 0x021b0404 0x00011006 + +/* set the default clock gate to save power */ +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +/* + * Setup CCM_CCOSR register as follows: + * + * cko1_en = 1 --> CKO1 enabled + * cko1_div = 111 --> divide by 8 + * cko1_sel = 1011 --> ahb_clk_root + * + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz + */ +DATA 4 0x020c4060 0x000000fb diff --git a/configs/cgtqmx6qeval_defconfig b/configs/cgtqmx6qeval_defconfig index 669938138c..4eba4bea6d 100644 --- a/configs/cgtqmx6qeval_defconfig +++ b/configs/cgtqmx6qeval_defconfig @@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/congatec/cgtqmx6eval/imximage.cfg,MX6Q" CONFIG_ARM=y CONFIG_TARGET_CGTQMX6EVAL=y diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig index dc8e254df9..67c1b77e05 100644 --- a/configs/mx6qsabresd_defconfig +++ b/configs/mx6qsabresd_defconfig @@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q" CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y -- cgit v1.2.1 From 3098ef429c1ee6678ac1c643cb7246c13137070d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 16 Sep 2014 11:13:12 -0300 Subject: mx25pdk: Fix CONFIG_SYS_FSL_ESDHC_ADDR We should pass the MMC1 base address into CONFIG_SYS_FSL_ESDHC_ADDR. Signed-off-by: Fabio Estevam --- include/configs/mx25pdk.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index d464ad964b..34199af203 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -100,7 +100,7 @@ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_ADDR IMX_MMC_SDHC1_BASE #define CONFIG_SYS_FSL_ESDHC_NUM 1 /* PMIC Configs */ -- cgit v1.2.1 From 4f797c4c1c93b508928786f539cd6a4a98a68f22 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 16 Sep 2014 11:13:13 -0300 Subject: mx25pdk: Add generic board support Let's enable CONFIG_SYS_GENERIC_BOARD in order to get rid of warnings related to generic board support is not in place. Signed-off-by: Fabio Estevam --- include/configs/mx25pdk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 34199af203..c02e29be9a 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -14,6 +14,7 @@ #define CONFIG_MX25 #define CONFIG_SYS_TEXT_BASE 0x81200000 #define CONFIG_MXC_GPIO +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TIMER_RATE 32768 #define CONFIG_SYS_TIMER_COUNTER \ -- cgit v1.2.1 From 36c1ca4d46ef11ac7b3c0afb5c42dadb4e8773f3 Mon Sep 17 00:00:00 2001 From: Nitin Garg Date: Tue, 16 Sep 2014 13:33:25 -0500 Subject: imx: Support i.MX6 High Assurance Boot authentication When CONFIG_SECURE_BOOT is enabled, the signed images like kernel and dtb can be authenticated using iMX6 CAAM. The added command hab_auth_img can be used for HAB authentication of images. The command takes the image DDR location, IVT (Image Vector Table) offset inside image as parameters. Detailed info about signing images can be found in Freescale AppNote AN4581. Signed-off-by: Nitin Garg --- arch/arm/cpu/armv7/mx6/clock.c | 27 ++++++ arch/arm/cpu/armv7/mx6/hab.c | 169 +++++++++++++++++++++++++++++++++- arch/arm/cpu/armv7/mx6/soc.c | 15 +++ arch/arm/include/asm/arch-mx6/clock.h | 1 + 4 files changed, 211 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 336e557a27..d200531030 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -642,6 +642,33 @@ int enable_pcie_clock(void) BM_ANADIG_PLL_ENET_ENABLE_PCIE); } +#ifdef CONFIG_SECURE_BOOT +void hab_caam_clock_enable(unsigned char enable) +{ + u32 reg; + + /* CG4 ~ CG6, CAAM clocks */ + reg = __raw_readl(&imx_ccm->CCGR0); + if (enable) + reg |= (MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); + else + reg &= ~(MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK); + __raw_writel(reg, &imx_ccm->CCGR0); + + /* EMI slow clk */ + reg = __raw_readl(&imx_ccm->CCGR6); + if (enable) + reg |= MXC_CCM_CCGR6_EMI_SLOW_MASK; + else + reg &= ~MXC_CCM_CCGR6_EMI_SLOW_MASK; + __raw_writel(reg, &imx_ccm->CCGR6); +} +#endif + unsigned int mxc_get_clock(enum mxc_clock clk) { switch (clk) { diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/cpu/armv7/mx6/hab.c index f6810a680d..8dee595eaf 100644 --- a/arch/arm/cpu/armv7/mx6/hab.c +++ b/arch/arm/cpu/armv7/mx6/hab.c @@ -1,12 +1,14 @@ /* - * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * Copyright (C) 2010-2014 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ #include #include +#include #include +#include #include /* -------- start of HAB API updates ------------*/ @@ -71,6 +73,44 @@ ((hab_rvt_exit_t *)HAB_RVT_EXIT) \ ) +#define IVT_SIZE 0x20 +#define ALIGN_SIZE 0x1000 +#define CSF_PAD_SIZE 0x2000 +#define MX6DQ_PU_IROM_MMU_EN_VAR 0x009024a8 +#define MX6DLS_PU_IROM_MMU_EN_VAR 0x00901dd0 +#define MX6SL_PU_IROM_MMU_EN_VAR 0x00900a18 + +/* + * +------------+ 0x0 (DDR_UIMAGE_START) - + * | Header | | + * +------------+ 0x40 | + * | | | + * | | | + * | | | + * | | | + * | Image Data | | + * . | | + * . | > Stuff to be authenticated ----+ + * . | | | + * | | | | + * | | | | + * +------------+ | | + * | | | | + * | Fill Data | | | + * | | | | + * +------------+ Align to ALIGN_SIZE | | + * | IVT | | | + * +------------+ + IVT_SIZE - | + * | | | + * | CSF DATA | <---------------------------------------------------------+ + * | | + * +------------+ + * | | + * | Fill Data | + * | | + * +------------+ + CSF_PAD_SIZE + */ + bool is_hab_enabled(void) { struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; @@ -144,6 +184,108 @@ int get_hab_status(void) return 0; } +uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) +{ + uint32_t load_addr = 0; + size_t bytes; + ptrdiff_t ivt_offset = 0; + int result = 0; + ulong start; + hab_rvt_authenticate_image_t *hab_rvt_authenticate_image; + hab_rvt_entry_t *hab_rvt_entry; + hab_rvt_exit_t *hab_rvt_exit; + + hab_rvt_authenticate_image = hab_rvt_authenticate_image_p; + hab_rvt_entry = hab_rvt_entry_p; + hab_rvt_exit = hab_rvt_exit_p; + + if (is_hab_enabled()) { + printf("\nAuthenticate image from DDR location 0x%x...\n", + ddr_start); + + hab_caam_clock_enable(1); + + if (hab_rvt_entry() == HAB_SUCCESS) { + /* If not already aligned, Align to ALIGN_SIZE */ + ivt_offset = (image_size + ALIGN_SIZE - 1) & + ~(ALIGN_SIZE - 1); + + start = ddr_start; + bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE; +#ifdef DEBUG + printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", + ivt_offset, ddr_start + ivt_offset); + puts("Dumping IVT\n"); + print_buffer(ddr_start + ivt_offset, + (void *)(ddr_start + ivt_offset), + 4, 0x8, 0); + + puts("Dumping CSF Header\n"); + print_buffer(ddr_start + ivt_offset+IVT_SIZE, + (void *)(ddr_start + ivt_offset+IVT_SIZE), + 4, 0x10, 0); + + get_hab_status(); + + puts("\nCalling authenticate_image in ROM\n"); + printf("\tivt_offset = 0x%x\n", ivt_offset); + printf("\tstart = 0x%08lx\n", start); + printf("\tbytes = 0x%x\n", bytes); +#endif + /* + * If the MMU is enabled, we have to notify the ROM + * code, or it won't flush the caches when needed. + * This is done, by setting the "pu_irom_mmu_enabled" + * word to 1. You can find its address by looking in + * the ROM map. This is critical for + * authenticate_image(). If MMU is enabled, without + * setting this bit, authentication will fail and may + * crash. + */ + /* Check MMU enabled */ + if (get_cr() & CR_M) { + if (is_cpu_type(MXC_CPU_MX6Q) || + is_cpu_type(MXC_CPU_MX6D)) { + /* + * This won't work on Rev 1.0.0 of + * i.MX6Q/D, since their ROM doesn't + * do cache flushes. don't think any + * exist, so we ignore them. + */ + writel(1, MX6DQ_PU_IROM_MMU_EN_VAR); + } else if (is_cpu_type(MXC_CPU_MX6DL) || + is_cpu_type(MXC_CPU_MX6SOLO)) { + writel(1, MX6DLS_PU_IROM_MMU_EN_VAR); + } else if (is_cpu_type(MXC_CPU_MX6SL)) { + writel(1, MX6SL_PU_IROM_MMU_EN_VAR); + } + } + + load_addr = (uint32_t)hab_rvt_authenticate_image( + HAB_CID_UBOOT, + ivt_offset, (void **)&start, + (size_t *)&bytes, NULL); + if (hab_rvt_exit() != HAB_SUCCESS) { + puts("hab exit function fail\n"); + load_addr = 0; + } + } else { + puts("hab entry function fail\n"); + } + + hab_caam_clock_enable(0); + + get_hab_status(); + } else { + puts("hab fuse not enabled\n"); + } + + if ((!is_hab_enabled()) || (load_addr != 0)) + result = 1; + + return result; +} + int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if ((argc != 1)) { @@ -156,8 +298,33 @@ int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + ulong addr, ivt_offset; + int rcode = 0; + + if (argc < 3) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[1], NULL, 16); + ivt_offset = simple_strtoul(argv[2], NULL, 16); + + rcode = authenticate_image(addr, ivt_offset); + + return rcode; +} + U_BOOT_CMD( hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status, "display HAB status", "" ); + +U_BOOT_CMD( + hab_auth_img, 3, 0, do_authenticate_image, + "authenticate image via HAB", + "addr ivt_offset\n" + "addr - image hex address\n" + "ivt_offset - hex offset of IVT in the image" + ); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index ba21cfe580..05683a3400 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -273,10 +273,25 @@ int board_postclk_init(void) #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) { +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) + enum dcache_option option = DCACHE_WRITETHROUGH; +#else + enum dcache_option option = DCACHE_WRITEBACK; +#endif + /* Avoid random hang when download by usb */ invalidate_dcache_all(); + /* Enable D-cache. I-cache is already enabled in start.S */ dcache_enable(); + + /* Enable caching on OCRAM and ROM */ + mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR, + ROMCP_ARB_END_ADDR, + option); + mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR, + IRAM_SIZE, + option); } #endif diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index c11674ff8a..3c58a0ab60 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -53,6 +53,7 @@ u32 imx_get_uartclk(void); u32 imx_get_fecclk(void); unsigned int mxc_get_clock(enum mxc_clock clk); void setup_gpmi_io_clk(u32 cfg); +void hab_caam_clock_enable(unsigned char enable); void enable_ocotp_clk(unsigned char enable); void enable_usboh3_clk(unsigned char enable); void enable_uart_clk(unsigned char enable); -- cgit v1.2.1 From dd24b57bb78422eba6780f0b6cc4c0b049a82371 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 28 Apr 2014 03:38:39 +0200 Subject: usb: ehci: mxs: Add board-specific callbacks Add board-specific callbacks for enabling/disabling port power into the MXS EHCI controller driver. This is in-line with the names of callbacks on other systems. Signed-off-by: Marek Vasut Cc: Stefano Babic --- drivers/usb/host/ehci-mxs.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c index 4d652b32db..6b8d969bb0 100644 --- a/drivers/usb/host/ehci-mxs.c +++ b/drivers/usb/host/ehci-mxs.c @@ -77,6 +77,16 @@ static int ehci_mxs_toggle_clock(const struct ehci_mxs_port *port, int enable) return 0; } +int __weak board_ehci_hcd_init(int port) +{ + return 0; +} + +int __weak board_ehci_hcd_exit(int port) +{ + return 0; +} + int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { @@ -90,6 +100,10 @@ int ehci_hcd_init(int index, enum usb_init_type init, return -EINVAL; } + ret = board_ehci_hcd_init(index); + if (ret) + return ret; + port = &mxs_port[index]; /* Reset the PHY block */ @@ -154,5 +168,7 @@ int ehci_hcd_stop(int index) /* Disable USB clock */ ret = ehci_mxs_toggle_clock(port, 0); + board_ehci_hcd_exit(index); + return ret; } -- cgit v1.2.1 From be0ecdbed5efc7833275701ebdb1ff8ef7ffd4c0 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 28 Apr 2014 03:38:40 +0200 Subject: arm: mxs: Wait when disabling VDDMEM current limiter According to i.MX23 datasheet Table 32-17, we must wait for the supply to settle before disabling the current limiter. Indeed, not waiting a little here causes the system to crash at times. Signed-off-by: Marek Vasut Cc: Stefano Babic --- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index 3baf4ddefc..de8841a0e1 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -240,9 +240,14 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; + /* We must wait before and after disabling the current limiter! */ + early_delay(10000); + clrbits_le32(&power_regs->hw_power_vddmemctrl, POWER_VDDMEMCTRL_ENABLE_ILIMIT); + early_delay(10000); + } static void mx23_mem_init(void) -- cgit v1.2.1 From 7c604e98c2213619af6a8c3064418af9b689cf56 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 28 Apr 2014 03:38:41 +0200 Subject: arm: mxs: Wait for DRAM to start Instead of waiting for a fixed period of time and hoping for the best that the DRAM will start, read back an EMI status register which tells us exactly when the DRAM started. Signed-off-by: Marek Vasut Cc: Stefano Babic --- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index de8841a0e1..97ef67d8c5 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -274,7 +274,13 @@ static void mx23_mem_init(void) setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16); clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17); - early_delay(20000); + + /* Wait for EMI_STAT bit DRAM_HALTED */ + for (;;) { + if (!(readl(MXS_EMI_BASE + 0x10) & (1 << 1))) + break; + early_delay(1000); + } /* Adjust EMI port priority. */ clrsetbits_le32(0x80020000, 0x1f << 16, 0x2); -- cgit v1.2.1 From ca11db2603e58cfee8e64931dcc3c87023ecb1cf Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 28 Apr 2014 03:38:42 +0200 Subject: arm: mxs: olinuxino: Enable USB only when needed Enable the power to the USB port only when the USB port is really needed. Do not enable the power unconditionally. Signed-off-by: Marek Vasut Cc: Stefano Babic --- board/olimex/mx23_olinuxino/mx23_olinuxino.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index e2a03a110b..65cbbf15b7 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -30,13 +30,25 @@ int board_early_init_f(void) /* SSP0 clock at 96MHz */ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); + return 0; +} + #ifdef CONFIG_CMD_USB - /* Enable LAN9512 */ +int board_ehci_hcd_init(int port) +{ + /* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */ gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); -#endif + udelay(100); + return 0; +} +int board_ehci_hcd_exit(int port) +{ + /* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */ + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 0); return 0; } +#endif int dram_init(void) { -- cgit v1.2.1 From 1fb065feae451b8f22cb9b8b156508ea541c36d7 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 28 Apr 2014 03:38:43 +0200 Subject: arm: mxs: olinuxino: Fine-tune DRAM configuration Add fine-tuning for the DRAM configuration according to the DRAM chip datasheet. THis configuration applies to both Hynix HY5DU12622DTP and Samsung K5H511538J-D43 . Signed-off-by: Marek Vasut Cc: Stefano Babic --- board/olimex/mx23_olinuxino/mx23_olinuxino.c | 30 ++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index 65cbbf15b7..313ab20e26 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -78,3 +78,33 @@ int board_init(void) return 0; } + +/* Fine-tune the DRAM configuration. */ +void mxs_adjust_memory_params(uint32_t *dram_vals) +{ + /* Enable Auto Precharge. */ + dram_vals[3] |= 1 << 8; + /* Enable Fast Writes. */ + dram_vals[5] |= 1 << 8; + /* tEMRS = 3*tCK */ + dram_vals[10] &= ~(0x3 << 8); + dram_vals[10] |= (0x3 << 8); + /* CASLAT = 3*tCK */ + dram_vals[11] &= ~(0x3 << 0); + dram_vals[11] |= (0x3 << 0); + /* tCKE = 1*tCK */ + dram_vals[12] &= ~(0x7 << 0); + dram_vals[12] |= (0x1 << 0); + /* CASLAT_LIN_GATE = 3*tCK , CASLAT_LIN = 3*tCK, tWTR=2*tCK */ + dram_vals[13] &= ~((0xf << 16) | (0xf << 24) | (0xf << 0)); + dram_vals[13] |= (0x6 << 16) | (0x6 << 24) | (0x2 << 0); + /* tDAL = 6*tCK */ + dram_vals[15] &= ~(0xf << 16); + dram_vals[15] |= (0x6 << 16); + /* tREF = 1040*tCK */ + dram_vals[26] &= ~0xffff; + dram_vals[26] |= 0x0410; + /* tRAS_MAX = 9334*tCK */ + dram_vals[32] &= ~0xffff; + dram_vals[32] |= 0x2475; +} -- cgit v1.2.1 From e7380a1fdc90a88c450458f87899199bd8f4681e Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Tue, 9 Sep 2014 10:16:57 +0800 Subject: imx: mx6qarm2: Add the kernel FDT Loading support To support loading FDT file for kernel, add the fdt address, file and loading script to arm2 board default environment. Signed-off-by: Ye.Li --- include/configs/mx6qarm2.h | 41 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 38 insertions(+), 3 deletions(-) diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index e2469a1165..a8c496d065 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -69,15 +69,19 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_LOADADDR 0x10800000 +#define CONFIG_LOADADDR 0x12000000 #define CONFIG_SYS_TEXT_BASE 0x17800000 #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "console=ttymxc3\0" \ + "fdt_file=imx6q-arm2.dtb\0" \ + "fdt_addr=0x18000000\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=1\0" \ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ @@ -88,15 +92,46 @@ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootz\0" \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ "run netargs; " \ - "dhcp ${image}; bootz\0" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev};" \ -- cgit v1.2.1 From adca1875c8090dea9b163550d8607ccba5418819 Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Tue, 9 Sep 2014 10:16:58 +0800 Subject: imx: mx6qarm2: Change the mmcroot and mmcpart env value 1. Set the image load partition to the first FAT partition. 2. Set the kernel rootfs partition to the second partition. Signed-off-by: Ye.Li --- include/configs/mx6qarm2.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index a8c496d065..aa01647c97 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -83,8 +83,8 @@ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev=1\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ -- cgit v1.2.1 From 9293d7fd502ce29302fadb8b4ccb9231ec0bcc66 Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Tue, 9 Sep 2014 10:17:00 +0800 Subject: imx: mx6: Checking PLL2 PFD0 and PFD2 for periph_clk before PFD reset Checking the pre_periph_clk_sel and pre_periph2_clk of CCM CBCMR register, if the PLL2 PFD0 or PLL2 PFD2 is used for the clock source, do not reset this PFD to avoid system hang. Customers may set this in DDR script or use BT_FREQ to select low freq boot. Signed-off-by: Ye.Li --- arch/arm/cpu/armv7/mx6/soc.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 05683a3400..6352422253 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -354,10 +354,10 @@ const struct boot_mode soc_boot_modes[] = { void s_init(void) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; - int is_6q = is_cpu_type(MXC_CPU_MX6Q); + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; u32 mask480; u32 mask528; - + u32 reg, periph1, periph2; if (is_cpu_type(MXC_CPU_MX6SX)) return; @@ -372,15 +372,23 @@ void s_init(void) ANATOP_PFD_CLKGATE_MASK(1) | ANATOP_PFD_CLKGATE_MASK(2) | ANATOP_PFD_CLKGATE_MASK(3); - mask528 = ANATOP_PFD_CLKGATE_MASK(0) | - ANATOP_PFD_CLKGATE_MASK(1) | + mask528 = ANATOP_PFD_CLKGATE_MASK(1) | ANATOP_PFD_CLKGATE_MASK(3); - /* - * Don't reset PFD2 on DL/S - */ - if (is_6q) + reg = readl(&ccm->cbcmr); + periph2 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) + >> MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET); + periph1 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK) + >> MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET); + + /* Checking if PLL2 PFD0 or PLL2 PFD2 is using for periph clock */ + if ((periph2 != 0x2) && (periph1 != 0x2)) + mask528 |= ANATOP_PFD_CLKGATE_MASK(0); + + if ((periph2 != 0x1) && (periph1 != 0x1) && + (periph2 != 0x3) && (periph1 != 0x3)) mask528 |= ANATOP_PFD_CLKGATE_MASK(2); + writel(mask480, &anatop->pfd_480_set); writel(mask528, &anatop->pfd_528_set); writel(mask480, &anatop->pfd_480_clr); -- cgit v1.2.1 From 5546ad0734bb5eed2b3cd6333dbcec51ae45185a Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Mon, 15 Sep 2014 17:23:14 +0800 Subject: usb: ehci-mx6: Rename the USB register base address The mx6sl/mx6sx has 2 OTG and 1 host. So they have name "USBO2H_USB_BASE_ADDR" in imx-regs.h. The driver hard codes the USB base address name to "USBOH3", which causes the driver failed to build for mx6sl/mx6sx. This patch uniform the address name to "USB_BASE_ADDR" for all mx6 series. Signed-off-by: Ye.Li --- arch/arm/include/asm/arch-mx6/imx-regs.h | 9 ++------- drivers/usb/host/ehci-mx6.c | 4 ++-- 2 files changed, 4 insertions(+), 9 deletions(-) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 22614fcd0e..a159309bb9 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -215,13 +215,8 @@ #define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000) #define CAAM_BASE_ADDR (ATZ2_BASE_ADDR) #define ARM_BASE_ADDR (ATZ2_BASE_ADDR + 0x40000) -#ifdef CONFIG_MX6SL -#define USBO2H_PL301_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000) -#define USBO2H_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) -#else -#define USBOH3_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000) -#define USBOH3_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) -#endif +#define USB_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000) +#define USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) #define ENET_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x8000) #ifdef CONFIG_MX6SL diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index c0a557b2ad..9ec5a0a539 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -174,7 +174,7 @@ struct usbnc_regs { static void usb_oc_config(int index) { - struct usbnc_regs *usbnc = (struct usbnc_regs *)(USBOH3_USB_BASE_ADDR + + struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET); void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]); u32 val; @@ -207,7 +207,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { enum usb_init_type type; - struct usb_ehci *ehci = (struct usb_ehci *)(USBOH3_USB_BASE_ADDR + + struct usb_ehci *ehci = (struct usb_ehci *)(USB_BASE_ADDR + (0x200 * index)); if (index > 3) -- cgit v1.2.1 From 4ba9b1c2e3805c1399b2c432b5c0b2f1d985b88a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 23 Sep 2014 13:18:18 +0200 Subject: arm: m28evk: Test if bootscript exists before loading it Make sure the boot.scr exists on the card before loading it from the card to avoid annoying message on the console. Signed-off-by: Marek Vasut Cc: Stefano Babic --- include/configs/m28evk.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index fccd29dc26..2d9ad5f23c 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -279,10 +279,12 @@ "bootm ${kernel_addr_r}\0" \ "try_bootscript=" \ "mmc rescan;" \ + "if test -e mmc 0:2 ${bootscript} ; then " \ "if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};" \ "then;" \ "\techo Running bootscript...;" \ "\tsource ${kernel_addr_r};" \ + "fi ; " \ "fi\0" /* The rest of the configuration is shared */ -- cgit v1.2.1 From 14b256e5c084e1b693f4ad73c6a8beee7ffcb4af Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 23 Sep 2014 13:18:19 +0200 Subject: arm: m53evk: Test if bootscript exists before loading it Make sure the boot.scr exists on the card before loading it from the card to avoid annoying message on the console. Signed-off-by: Marek Vasut Cc: Stefano Babic --- include/configs/m53evk.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index df6a226109..ad9c39c16c 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -348,10 +348,12 @@ "bootm ${kernel_addr_r}\0" \ "try_bootscript=" \ "mmc rescan;" \ + "if test -e mmc 0:1 ${bootscript} ; then " \ "if ext4load mmc 0:1 ${kernel_addr_r} ${bootscript};" \ "then;" \ "\techo Running bootscript...;" \ "\tsource ${kernel_addr_r};" \ + "fi ; " \ "fi\0" #endif /* __M53EVK_CONFIG_H__ */ -- cgit v1.2.1 From fc532a921aae1151dd39322d8f50b55a735de8d5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 23 Sep 2014 13:18:20 +0200 Subject: arm: m28evk: Enable FS_GENERIC Enable the CONFIG_CMD_FS_GENERIC on m28evk to avoid per-fs specific commands and tweak the environment to cater for this new option. Signed-off-by: Marek Vasut Cc: Stefano Babic --- include/configs/m28evk.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 2d9ad5f23c..322b45fd99 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -32,6 +32,7 @@ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_GPIO #define CONFIG_CMD_GREPENV #define CONFIG_CMD_I2C @@ -236,7 +237,7 @@ "addargs=run addcons addmtd addmisc\0" \ "mmcload=" \ "mmc rescan ; " \ - "ext4load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \ + "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \ "ubiload=" \ "ubi part UBI ; ubifsmount ubi0:rootfs ; " \ "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \ @@ -280,7 +281,7 @@ "try_bootscript=" \ "mmc rescan;" \ "if test -e mmc 0:2 ${bootscript} ; then " \ - "if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};" \ + "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \ "then;" \ "\techo Running bootscript...;" \ "\tsource ${kernel_addr_r};" \ -- cgit v1.2.1 From febae49a2b282283db98c1217aa04c4538704585 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 23 Sep 2014 13:18:21 +0200 Subject: arm: m53evk: Enable FS_GENERIC Enable the CONFIG_CMD_FS_GENERIC on m53evk to avoid per-fs specific commands and tweak the environment to cater for this new option. Signed-off-by: Marek Vasut Cc: Stefano Babic --- include/configs/m53evk.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index ad9c39c16c..ee4eb10e46 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -38,6 +38,7 @@ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_GREPENV #define CONFIG_CMD_I2C #define CONFIG_CMD_MII @@ -305,7 +306,7 @@ "addargs=run addcons addmtd addmisc\0" \ "mmcload=" \ "mmc rescan ; " \ - "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \ + "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \ "ubiload=" \ "ubi part UBI ; ubifsmount ubi0:rootfs ; " \ "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \ @@ -349,7 +350,7 @@ "try_bootscript=" \ "mmc rescan;" \ "if test -e mmc 0:1 ${bootscript} ; then " \ - "if ext4load mmc 0:1 ${kernel_addr_r} ${bootscript};" \ + "if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \ "then;" \ "\techo Running bootscript...;" \ "\tsource ${kernel_addr_r};" \ -- cgit v1.2.1 From b357503f1cdedade6d31991fa6aabb4174f92989 Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Mon, 29 Sep 2014 23:26:28 +0800 Subject: imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2 shared the same board with i.MX6Q ARM2 board since the i.MX6DL is pin-pin compatible with i.MX6Q. The patch also support the DDR 32-BIT mode option. Please define CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT mode.But due to the board design, it's 64bit DDR buswidth physically, so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it. Signed-off-by: Ye.Li --- board/freescale/mx6qarm2/MAINTAINERS | 2 + board/freescale/mx6qarm2/imximage_mx6dl.cfg | 143 ++++++++++++++++++++++++++++ board/freescale/mx6qarm2/mx6qarm2.c | 4 + configs/mx6dlarm2_defconfig | 3 + configs/mx6qarm2_defconfig | 2 +- include/configs/mx6qarm2.h | 5 +- 6 files changed, 157 insertions(+), 2 deletions(-) create mode 100644 board/freescale/mx6qarm2/imximage_mx6dl.cfg create mode 100644 configs/mx6dlarm2_defconfig diff --git a/board/freescale/mx6qarm2/MAINTAINERS b/board/freescale/mx6qarm2/MAINTAINERS index 42c19d13ec..c8d594b17f 100644 --- a/board/freescale/mx6qarm2/MAINTAINERS +++ b/board/freescale/mx6qarm2/MAINTAINERS @@ -1,6 +1,8 @@ MX6QARM2 BOARD M: Jason Liu +M: Ye Li S: Maintained F: board/freescale/mx6qarm2/ F: include/configs/mx6qarm2.h F: configs/mx6qarm2_defconfig +F: configs/mx6dlarm2_defconfig diff --git a/board/freescale/mx6qarm2/imximage_mx6dl.cfg b/board/freescale/mx6qarm2/imximage_mx6dl.cfg new file mode 100644 index 0000000000..eef723c254 --- /dev/null +++ b/board/freescale/mx6qarm2/imximage_mx6dl.cfg @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * Jason Liu + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020e0798 0x000c0000 +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0588 0x00000030 +DATA 4 0x020e0594 0x00000030 +DATA 4 0x020e056c 0x00000030 +DATA 4 0x020e0578 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e057c 0x00000030 +DATA 4 0x020e0590 0x00003000 +DATA 4 0x020e0598 0x00003000 +DATA 4 0x020e058c 0x00000000 +DATA 4 0x020e059c 0x00003030 +DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0750 0x00020000 +DATA 4 0x020e05a8 0x00000030 +DATA 4 0x020e05b0 0x00000030 +DATA 4 0x020e0524 0x00000030 +DATA 4 0x020e051c 0x00000030 +DATA 4 0x020e0518 0x00000030 +DATA 4 0x020e050c 0x00000030 +DATA 4 0x020e05b8 0x00000030 +DATA 4 0x020e05c0 0x00000030 +DATA 4 0x020e0774 0x00020000 +DATA 4 0x020e0784 0x00000030 +DATA 4 0x020e0788 0x00000030 +DATA 4 0x020e0794 0x00000030 +DATA 4 0x020e079c 0x00000030 +DATA 4 0x020e07a0 0x00000030 +DATA 4 0x020e07a4 0x00000030 +DATA 4 0x020e07a8 0x00000030 +DATA 4 0x020e0748 0x00000030 +DATA 4 0x020e05ac 0x00000030 +DATA 4 0x020e05b4 0x00000030 +DATA 4 0x020e0528 0x00000030 +DATA 4 0x020e0520 0x00000030 +DATA 4 0x020e0514 0x00000030 +DATA 4 0x020e0510 0x00000030 +DATA 4 0x020e05bc 0x00000030 +DATA 4 0x020e05c4 0x00000030 + +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b4800 0xa1390003 +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F +DATA 4 0x021b480c 0x00370037 +DATA 4 0x021b4810 0x00370037 +DATA 4 0x021b083c 0x422f0220 +DATA 4 0x021b0840 0x021f0219 +DATA 4 0x021b483C 0x422f0220 +DATA 4 0x021b4840 0x022d022f +DATA 4 0x021b0848 0x47494b49 +DATA 4 0x021b4848 0x48484c47 +DATA 4 0x021b0850 0x39382b2f +DATA 4 0x021b4850 0x2f35312c +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 +DATA 4 0x021b0004 0x0002002d +DATA 4 0x021b0008 0x00333030 + +DATA 4 0x021b000c 0x40445323 +DATA 4 0x021b0010 0xb66e8c63 + +DATA 4 0x021b0014 0x01ff00db +DATA 4 0x021b0018 0x00081740 +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b002c 0x000026d2 +DATA 4 0x021b0030 0x00440e21 +#ifdef CONFIG_DDR_32BIT +DATA 4 0x021b0040 0x00000017 +DATA 4 0x021b0000 0xc3190000 +#else +DATA 4 0x021b0040 0x00000027 +DATA 4 0x021b0000 0xc31a0000 +#endif +DATA 4 0x021b001c 0x04008032 +DATA 4 0x021b001c 0x0400803a +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x0000803b +DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00428039 +DATA 4 0x021b001c 0x07208030 +DATA 4 0x021b001c 0x07208038 +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b001c 0x04008048 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00000007 +DATA 4 0x021b4818 0x00000007 +DATA 4 0x021b0004 0x0002556d +DATA 4 0x021b4004 0x00011006 +DATA 4 0x021b001c 0x00000000 + +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +DATA 4 0x020e0010 0xF00000CF +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index 6c51f3a182..f2e577d514 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -224,7 +224,11 @@ int board_init(void) int checkboard(void) { +#ifdef CONFIG_MX6DL + puts("Board: MX6DL-Armadillo2\n"); +#else puts("Board: MX6Q-Armadillo2\n"); +#endif return 0; } diff --git a/configs/mx6dlarm2_defconfig b/configs/mx6dlarm2_defconfig new file mode 100644 index 0000000000..b4b78e5ab5 --- /dev/null +++ b/configs/mx6dlarm2_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL" +CONFIG_ARM=y +CONFIG_TARGET_MX6QARM2=y diff --git a/configs/mx6qarm2_defconfig b/configs/mx6qarm2_defconfig index bdcc672b57..a251615a38 100644 --- a/configs/mx6qarm2_defconfig +++ b/configs/mx6qarm2_defconfig @@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q" CONFIG_ARM=y CONFIG_TARGET_MX6QARM2=y diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index aa01647c97..ed57e4aa87 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -10,7 +10,6 @@ #define __CONFIG_H #define CONFIG_MX6 -#define CONFIG_MX6Q #include "mx6_common.h" @@ -169,7 +168,11 @@ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#ifdef CONFIG_DDR_32BIT +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) +#else #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) +#endif #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -- cgit v1.2.1 From 661139faf7b03a8d88da55ee36ad4b0fb7e35964 Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Mon, 29 Sep 2014 23:26:29 +0800 Subject: imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards Update the ddr scripts for LPDDR2 and add two build configs for LPDDR2 arm2 board. Since the LPDDR2 arm2 board has different DDR size, use CONFIG_DDR_MB in defconfig to replace the PHYS_SDRAM_SIZE. Signed-off-by: Ye.Li --- board/freescale/mx6qarm2/MAINTAINERS | 2 + board/freescale/mx6qarm2/imximage.cfg | 189 +++++++++++++++- board/freescale/mx6qarm2/imximage_mx6dl.cfg | 319 ++++++++++++++++++++++++++++ board/freescale/mx6qarm2/mx6qarm2.c | 7 +- configs/mx6dlarm2_defconfig | 2 +- configs/mx6dlarm2_lpddr2_defconfig | 3 + configs/mx6qarm2_defconfig | 2 +- configs/mx6qarm2_lpddr2_defconfig | 3 + include/configs/mx6qarm2.h | 5 - 9 files changed, 518 insertions(+), 14 deletions(-) create mode 100644 configs/mx6dlarm2_lpddr2_defconfig create mode 100644 configs/mx6qarm2_lpddr2_defconfig diff --git a/board/freescale/mx6qarm2/MAINTAINERS b/board/freescale/mx6qarm2/MAINTAINERS index c8d594b17f..52cf7f935a 100644 --- a/board/freescale/mx6qarm2/MAINTAINERS +++ b/board/freescale/mx6qarm2/MAINTAINERS @@ -6,3 +6,5 @@ F: board/freescale/mx6qarm2/ F: include/configs/mx6qarm2.h F: configs/mx6qarm2_defconfig F: configs/mx6dlarm2_defconfig +F: configs/mx6qarm2_lpddr2_defconfig +F: configs/mx6dlarm2_lpddr2_defconfig diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg index 710f34d9a5..c85bde510e 100644 --- a/board/freescale/mx6qarm2/imximage.cfg +++ b/board/freescale/mx6qarm2/imximage.cfg @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Copyright (C) 2011-2014 Freescale Semiconductor, Inc. * Jason Liu * * SPDX-License-Identifier: GPL-2.0+ @@ -30,6 +30,185 @@ BOOT_FROM sd * Address absolute address of the register * value value to be stored in the register */ +#ifdef CONFIG_MX6DQ_LPDDR2 +/* DCD */ +DATA 4 0x020C4018 0x60324 + +DATA 4 0x020E05a8 0x00003038 +DATA 4 0x020E05b0 0x00003038 +DATA 4 0x020E0524 0x00003038 +DATA 4 0x020E051c 0x00003038 + +DATA 4 0x020E0518 0x00003038 +DATA 4 0x020E050c 0x00003038 +DATA 4 0x020E05b8 0x00003038 +DATA 4 0x020E05c0 0x00003038 + +DATA 4 0x020E05ac 0x00000038 +DATA 4 0x020E05b4 0x00000038 +DATA 4 0x020E0528 0x00000038 +DATA 4 0x020E0520 0x00000038 + +DATA 4 0x020E0514 0x00000038 +DATA 4 0x020E0510 0x00000038 +DATA 4 0x020E05bc 0x00000038 +DATA 4 0x020E05c4 0x00000038 + +DATA 4 0x020E056c 0x00000038 +DATA 4 0x020E0578 0x00000038 +DATA 4 0x020E0588 0x00000038 +DATA 4 0x020E0594 0x00000038 + +DATA 4 0x020E057c 0x00000038 +DATA 4 0x020E0590 0x00000038 +DATA 4 0x020E0598 0x00000038 +DATA 4 0x020E058c 0x00000000 + +DATA 4 0x020E059c 0x00000038 +DATA 4 0x020E05a0 0x00000038 +DATA 4 0x020E0784 0x00000038 +DATA 4 0x020E0788 0x00000038 + +DATA 4 0x020E0794 0x00000038 +DATA 4 0x020E079c 0x00000038 +DATA 4 0x020E07a0 0x00000038 +DATA 4 0x020E07a4 0x00000038 + +DATA 4 0x020E07a8 0x00000038 +DATA 4 0x020E0748 0x00000038 +DATA 4 0x020E074c 0x00000038 +DATA 4 0x020E0750 0x00020000 + +DATA 4 0x020E0758 0x00000000 +DATA 4 0x020E0774 0x00020000 +DATA 4 0x020E078c 0x00000038 +DATA 4 0x020E0798 0x00080000 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b401c 0x00008000 + +DATA 4 0x021b085c 0x1b5f01ff +DATA 4 0x021b485c 0x1b5f01ff + +DATA 4 0x021b0800 0xa1390000 +DATA 4 0x021b4800 0xa1390000 + +DATA 4 0x021b0890 0x00400000 +DATA 4 0x021b4890 0x00400000 + +DATA 4 0x021b48bc 0x00055555 + +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 + +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 + +DATA 4 0x021b082c 0xf3333333 +DATA 4 0x021b0830 0xf3333333 +DATA 4 0x021b0834 0xf3333333 +DATA 4 0x021b0838 0xf3333333 +DATA 4 0x021b482c 0xf3333333 +DATA 4 0x021b4830 0xf3333333 +DATA 4 0x021b4834 0xf3333333 +DATA 4 0x021b4838 0xf3333333 + +DATA 4 0x021b0848 0x49383b39 +DATA 4 0x021b0850 0x30364738 +DATA 4 0x021b4848 0x3e3c3846 +DATA 4 0x021b4850 0x4c294b35 + +DATA 4 0x021b083c 0x20000000 +DATA 4 0x021b0840 0x0 +DATA 4 0x021b483c 0x20000000 +DATA 4 0x021b4840 0x0 + +DATA 4 0x021b0858 0xf00 +DATA 4 0x021b4858 0xf00 + +DATA 4 0x021b08b8 0x800 +DATA 4 0x021b48b8 0x800 + +DATA 4 0x021b000c 0x555a61a5 +DATA 4 0x021b0004 0x20036 +DATA 4 0x021b0010 0x160e83 +DATA 4 0x021b0014 0xdd +DATA 4 0x021b0018 0x8174c +DATA 4 0x021b002c 0xf9f26d2 +DATA 4 0x021b0030 0x20e +DATA 4 0x021b0038 0x200aac +DATA 4 0x021b0008 0x0 + +DATA 4 0x021b0040 0x5f + +DATA 4 0x021b0000 0xc3010000 + +DATA 4 0x021b400c 0x555a61a5 +DATA 4 0x021b4004 0x20036 +DATA 4 0x021b4010 0x160e83 +DATA 4 0x021b4014 0xdd +DATA 4 0x021b4018 0x8174c +DATA 4 0x021b402c 0xf9f26d2 +DATA 4 0x021b4030 0x20e +DATA 4 0x021b4038 0x200aac +DATA 4 0x021b4008 0x0 + +DATA 4 0x021b4040 0x3f +DATA 4 0x021b4000 0xc3010000 + +DATA 4 0x021b001c 0x3f8030 +DATA 4 0x021b001c 0xff0a8030 +DATA 4 0x021b001c 0xc2018030 +DATA 4 0x021b001c 0x6028030 +DATA 4 0x021b001c 0x2038030 + +DATA 4 0x021b401c 0x3f8030 +DATA 4 0x021b401c 0xff0a8030 +DATA 4 0x021b401c 0xc2018030 +DATA 4 0x021b401c 0x6028030 +DATA 4 0x021b401c 0x2038030 + +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b4800 0xa1390003 + +DATA 4 0x021b0020 0x7800 +DATA 4 0x021b4020 0x7800 + +DATA 4 0x021b0818 0x0 +DATA 4 0x021b4818 0x0 + +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b4800 0xa1390003 + +DATA 4 0x021b08b8 0x800 +DATA 4 0x021b48b8 0x800 + +DATA 4 0x021b001c 0x0 +DATA 4 0x021b401c 0x0 + +DATA 4 0x021b0404 0x00011006 + +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +#else DATA 4 0x020e05a8 0x00000030 DATA 4 0x020e05b0 0x00000030 DATA 4 0x020e0524 0x00000030 @@ -142,12 +321,8 @@ DATA 4 0x021b48b8 0x00000800 DATA 4 0x021b001c 0x00000000 DATA 4 0x021b0404 0x00011006 -DATA 4 0x020e0010 0xF00000FF -DATA 4 0x020e0018 0x00070007 -DATA 4 0x020e001c 0x00070007 - DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC00 +DATA 4 0x020c406c 0x0030FC03 DATA 4 0x020c4070 0x0FFFC000 DATA 4 0x020c4074 0x3FF00000 DATA 4 0x020c4078 0x00FFF300 @@ -159,3 +334,5 @@ DATA 4 0x020e0010 0xF00000CF /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F + +#endif /* CONFIG_MX6DQ_LPDDR2 */ diff --git a/board/freescale/mx6qarm2/imximage_mx6dl.cfg b/board/freescale/mx6qarm2/imximage_mx6dl.cfg index eef723c254..ae8dcc626e 100644 --- a/board/freescale/mx6qarm2/imximage_mx6dl.cfg +++ b/board/freescale/mx6qarm2/imximage_mx6dl.cfg @@ -30,6 +30,324 @@ BOOT_FROM sd * Address absolute address of the register * value value to be stored in the register */ + + + +#ifdef CONFIG_MX6DL_LPDDR2 + +/* IOMUX SETTINGS */ +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 */ +DATA 4 0x020E04bc 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 */ +DATA 4 0x020E04c0 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 */ +DATA 4 0x020E04c4 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 */ +DATA 4 0x020E04c8 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS4 */ +DATA 4 0x020E04cc 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS5 */ +DATA 4 0x020E04d0 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS6 */ +DATA 4 0x020E04d4 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS7 */ +DATA 4 0x020E04d8 0x00003028 + +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0 */ +DATA 4 0x020E0470 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1 */ +DATA 4 0x020E0474 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM2 */ +DATA 4 0x020E0478 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM3 */ +DATA 4 0x020E047c 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM4 */ +DATA 4 0x020E0480 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM5 */ +DATA 4 0x020E0484 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM6 */ +DATA 4 0x020E0488 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM7 */ +DATA 4 0x020E048c 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS */ +DATA 4 0x020E0464 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS */ +DATA 4 0x020E0490 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_0 */ +DATA 4 0x020E04ac 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_1 */ +DATA 4 0x020E04b0 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_RESET */ +DATA 4 0x020E0494 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCKE0 */ +DATA 4 0x020E04a4 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCKE1 */ +DATA 4 0x020E04a8 0x00000038 +/* + * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDBA2 + * DSE can be configured using Group Control Register: + * IOMUXC_SW_PAD_CTL_GRP_CTLDS + */ +DATA 4 0x020E04a0 0x00000000 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT0 */ +DATA 4 0x020E04b4 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT1 */ +DATA 4 0x020E04b8 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B0DS */ +DATA 4 0x020E0764 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B1DS */ +DATA 4 0x020E0770 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B2DS */ +DATA 4 0x020E0778 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B3DS */ +DATA 4 0x020E077c 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B4DS */ +DATA 4 0x020E0780 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B5DS */ +DATA 4 0x020E0784 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B6DS */ +DATA 4 0x020E078c 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B7DS */ +DATA 4 0x020E0748 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_ADDDS */ +DATA 4 0x020E074c 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_CTLDS */ +DATA 4 0x020E076c 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL */ +DATA 4 0x020E0750 0x00020000 +/* IOMUXC_SW_PAD_CTL_GRP_DDRPKE */ +DATA 4 0x020E0754 0x00000000 +/* IOMUXC_SW_PAD_CTL_GRP_DDRMODE */ +DATA 4 0x020E0760 0x00020000 +/* IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE */ +DATA 4 0x020E0774 0x00080000 + +/* + * DDR Controller Registers + * + * Manufacturer: Mocron + * Device Part Number: MT42L64M64D2KH-18 + * Clock Freq.: 528MHz + * MMDC channels: Both MMDC0, MMDC1 + *Density per CS in Gb: 256M + * Chip Selects used: 2 + * Number of Banks: 8 + * Row address: 14 + * Column address: 9 + * Data bus width 32 + */ + +/* MMDC_P0_BASE_ADDR = 0x021b0000 */ +/* MMDC_P1_BASE_ADDR = 0x021b4000 */ + +/* MMDC0_MDSCR, set the Configuration request bit during MMDC set up */ +DATA 4 0x021b001c 0x00008000 + +/* MMDC0_MDSCR, set the Configuration request bit during MMDC set up */ +DATA 4 0x021b401c 0x00008000 + +/*LPDDR2 ZQ params */ +DATA 4 0x021b085c 0x1b5f01ff +DATA 4 0x021b485c 0x1b5f01ff + +/* Calibration setup. */ +/* DDR_PHY_P0_MPZQHWCTRL, enable on time ZQ calibration */ +DATA 4 0x021b0800 0xa1390003 + +/*ca bus abs delay */ +DATA 4 0x021b0890 0x00400000 +/*ca bus abs delay */ +DATA 4 0x021b4890 0x00400000 +/* values of 20,40,50,60,7f tried. no difference seen */ + +/* DDR_PHY_P1_MPWRCADL */ +DATA 4 0x021b48bc 0x00055555 + +/*frc_msr.*/ +DATA 4 0x021b08b8 0x00000800 +/*frc_msr.*/ +DATA 4 0x021b48b8 0x00000800 + +/* DDR_PHY_P0_MPREDQBY0DL3 */ +DATA 4 0x021b081c 0x33333333 +/* DDR_PHY_P0_MPREDQBY1DL3 */ +DATA 4 0x021b0820 0x33333333 +/* DDR_PHY_P0_MPREDQBY2DL3 */ +DATA 4 0x021b0824 0x33333333 +/* DDR_PHY_P0_MPREDQBY3DL3 */ +DATA 4 0x021b0828 0x33333333 +/* DDR_PHY_P1_MPREDQBY0DL3 */ +DATA 4 0x021b481c 0x33333333 +/* DDR_PHY_P1_MPREDQBY1DL3 */ +DATA 4 0x021b4820 0x33333333 +/* DDR_PHY_P1_MPREDQBY2DL3 */ +DATA 4 0x021b4824 0x33333333 +/* DDR_PHY_P1_MPREDQBY3DL3 */ +DATA 4 0x021b4828 0x33333333 + +/* + * Read and write data delay, per byte. + * For optimized DDR operation it is recommended to run mmdc_calibration + * on your board, and replace 4 delay register assigns with resulted values + * Note: + * a. DQS gating is not relevant for LPDDR2. DSQ gating calibration section + * should be skipped, or the write/read calibration comming after that + * will stall + * b. The calibration code that runs for both MMDC0 & MMDC1 should be used. + */ + +DATA 4 0x021b0848 0x4b4b524f +DATA 4 0x021b4848 0x494f4c44 + +DATA 4 0x021b0850 0x3c3d303c +DATA 4 0x021b4850 0x3c343d38 + +/*dqs gating dis */ +DATA 4 0x021b083c 0x20000000 +DATA 4 0x021b0840 0x0 +DATA 4 0x021b483c 0x20000000 +DATA 4 0x021b4840 0x0 + +/*clk delay */ +DATA 4 0x021b0858 0xa00 +/*clk delay */ +DATA 4 0x021b4858 0xa00 + +/*frc_msr */ +DATA 4 0x021b08b8 0x00000800 +/*frc_msr */ +DATA 4 0x021b48b8 0x00000800 +/* Calibration setup end */ + +/* Channel0 - startng address 0x80000000 */ +/* MMDC0_MDCFG0 */ +DATA 4 0x021b000c 0x34386145 + +/* MMDC0_MDPDC */ +DATA 4 0x021b0004 0x00020036 +/* MMDC0_MDCFG1 */ +DATA 4 0x021b0010 0x00100c83 +/* MMDC0_MDCFG2 */ +DATA 4 0x021b0014 0x000000Dc +/* MMDC0_MDMISC */ +DATA 4 0x021b0018 0x0000174C +/* MMDC0_MDRWD;*/ +DATA 4 0x021b002c 0x0f9f26d2 +/* MMDC0_MDOR */ +DATA 4 0x021b0030 0x0000020e +/* MMDC0_MDCFG3LP */ +DATA 4 0x021b0038 0x00190778 +/* MMDC0_MDOTC */ +DATA 4 0x021b0008 0x00000000 + +/* CS0_END */ +DATA 4 0x021b0040 0x0000005f +/* ROC */ +DATA 4 0x021b0404 0x0000000f + +/* MMDC0_MDCTL */ +DATA 4 0x021b0000 0xc3010000 + +/* Channel1 - starting address 0x10000000 */ +/* MMDC1_MDCFG0 */ +DATA 4 0x021b400c 0x34386145 + +/* MMDC1_MDPDC */ +DATA 4 0x021b4004 0x00020036 +/* MMDC1_MDCFG1 */ +DATA 4 0x021b4010 0x00100c83 +/* MMDC1_MDCFG2 */ +DATA 4 0x021b4014 0x000000Dc +/* MMDC1_MDMISC */ +DATA 4 0x021b4018 0x0000174C +/* MMDC1_MDRWD;*/ +DATA 4 0x021b402c 0x0f9f26d2 +/* MMDC1_MDOR */ +DATA 4 0x021b4030 0x0000020e +/* MMDC1_MDCFG3LP */ +DATA 4 0x021b4038 0x00190778 +/* MMDC1_MDOTC */ +DATA 4 0x021b4008 0x00000000 + +/* CS0_END */ +DATA 4 0x021b4040 0x0000003f + +/* MMDC1_MDCTL */ +DATA 4 0x021b4000 0xc3010000 + +/* Channel0 : Configure DDR device:*/ +/* MRW: BA=0 CS=0 MR_ADDR=63 MR_OP=0 */ +DATA 4 0x021b001c 0x003f8030 +/* MRW: BA=0 CS=0 MR_ADDR=10 MR_OP=ff */ +DATA 4 0x021b001c 0xff0a8030 +/* MRW: BA=0 CS=0 MR_ADDR=1 MR_OP=a2 */ +DATA 4 0x021b001c 0xa2018030 +/* MRW: BA=0 CS=0 MR_ADDR=2 MR_OP=6. tcl=8, tcwl=4 */ +DATA 4 0x021b001c 0x06028030 +/* MRW: BA=0 CS=0 MR_ADDR=3 MR_OP=2.drive=240/6 */ +DATA 4 0x021b001c 0x01038030 + +/* Channel1 : Configure DDR device:*/ +/* MRW: BA=0 CS=0 MR_ADDR=63 MR_OP=0 */ +DATA 4 0x021b401c 0x003f8030 +/* MRW: BA=0 CS=0 MR_ADDR=10 MR_OP=ff */ +DATA 4 0x021b401c 0xff0a8030 +/* MRW: BA=0 CS=0 MR_ADDR=1 MR_OP=a2 */ +DATA 4 0x021b401c 0xa2018030 +/* MRW: BA=0 CS=0 MR_ADDR=2 MR_OP=6. tcl=8, tcwl=4 */ +DATA 4 0x021b401c 0x06028030 +/* MRW: BA=0 CS=0 MR_ADDR=3 MR_OP=2.drive=240/6 */ +DATA 4 0x021b401c 0x01038030 + +/* MMDC0_MDREF */ +DATA 4 0x021b0020 0x00005800 +/* MMDC1_MDREF */ +DATA 4 0x021b4020 0x00005800 + +/* DDR_PHY_P0_MPODTCTRL */ +DATA 4 0x021b0818 0x0 +/* DDR_PHY_P1_MPODTCTRL */ +DATA 4 0x021b4818 0x0 + +/* + * calibration values based on calibration compare of 0x00ffff00: + * Note, these calibration values are based on Freescale's board + * May need to run calibration on target board to fine tune these + */ + +/* DDR_PHY_P0_MPZQHWCTRL, enable automatic ZQ calibration */ +DATA 4 0x021b0800 0xa1310003 + +/* DDR_PHY_P0_MPMUR0, frc_msr */ +DATA 4 0x021b08b8 0x00000800 +/* DDR_PHY_P1_MPMUR0, frc_msr */ +DATA 4 0x021b48b8 0x00000800 + +/* + * MMDC0_MDSCR, clear this register + * (especially the configuration bit as initialization is complete) + */ +DATA 4 0x021b001c 0x00000000 +/* + * MMDC0_MDSCR, clear this register + * (especially the configuration bit as initialization is complete) + */ +DATA 4 0x021b401c 0x00000000 + +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +DATA 4 0x020e0010 0xF00000CF +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +#else /* CONFIG_MX6DL_LPDDR2 */ + DATA 4 0x020e0798 0x000c0000 DATA 4 0x020e0758 0x00000000 DATA 4 0x020e0588 0x00000030 @@ -141,3 +459,4 @@ DATA 4 0x020c4080 0x000003FF DATA 4 0x020e0010 0xF00000CF DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F +#endif /* CONFIG_MX6DL_LPDDR2 */ diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index f2e577d514..667dca532f 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -32,7 +32,12 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { - gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); +#if defined(CONFIG_MX6DL) && !defined(CONFIG_MX6DL_LPDDR2) && \ + defined(CONFIG_DDR_32BIT) + gd->ram_size = ((phys_size_t)CONFIG_DDR_MB * 1024 * 1024) / 2; +#else + gd->ram_size = (phys_size_t)CONFIG_DDR_MB * 1024 * 1024; +#endif return 0; } diff --git a/configs/mx6dlarm2_defconfig b/configs/mx6dlarm2_defconfig index b4b78e5ab5..de0193f4cc 100644 --- a/configs/mx6dlarm2_defconfig +++ b/configs/mx6dlarm2_defconfig @@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,DDR_MB=2048" CONFIG_ARM=y CONFIG_TARGET_MX6QARM2=y diff --git a/configs/mx6dlarm2_lpddr2_defconfig b/configs/mx6dlarm2_lpddr2_defconfig new file mode 100644 index 0000000000..cc432cfb54 --- /dev/null +++ b/configs/mx6dlarm2_lpddr2_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,MX6DL_LPDDR2,DDR_MB=512" +CONFIG_ARM=y +CONFIG_TARGET_MX6QARM2=y diff --git a/configs/mx6qarm2_defconfig b/configs/mx6qarm2_defconfig index a251615a38..3fe3559a17 100644 --- a/configs/mx6qarm2_defconfig +++ b/configs/mx6qarm2_defconfig @@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,DDR_MB=2048" CONFIG_ARM=y CONFIG_TARGET_MX6QARM2=y diff --git a/configs/mx6qarm2_lpddr2_defconfig b/configs/mx6qarm2_lpddr2_defconfig new file mode 100644 index 0000000000..491e22a057 --- /dev/null +++ b/configs/mx6qarm2_lpddr2_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,MX6DQ_LPDDR2,DDR_MB=512" +CONFIG_ARM=y +CONFIG_TARGET_MX6QARM2=y diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index ed57e4aa87..6e01fa0435 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -168,11 +168,6 @@ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#ifdef CONFIG_DDR_32BIT -#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) -#else -#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) -#endif #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -- cgit v1.2.1 From 13bc86037e832f547dacda81339d74177f2e569d Mon Sep 17 00:00:00 2001 From: Nitin Garg Date: Tue, 30 Sep 2014 11:39:29 -0500 Subject: imx6sx: Fix i.MX6SX HAB api function table offset i.MX6SX ROM implements unified table sections. The HAB function table is at offset 0x100. Update the HAB function pointers accordingly. Signed-off-by: Nitin Garg Tested-by: Fabio Estevam --- arch/arm/include/asm/arch-mx6/hab.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/arm/include/asm/arch-mx6/hab.h b/arch/arm/include/asm/arch-mx6/hab.h index 1f12695f67..c9e5318bfb 100644 --- a/arch/arm/include/asm/arch-mx6/hab.h +++ b/arch/arm/include/asm/arch-mx6/hab.h @@ -53,11 +53,17 @@ typedef void *hab_rvt_authenticate_image_t(uint8_t, ptrdiff_t, void **, size_t *, hab_loader_callback_f_t); typedef void hapi_clock_init_t(void); -#define HAB_RVT_REPORT_EVENT (*(uint32_t *)0x000000B4) -#define HAB_RVT_REPORT_STATUS (*(uint32_t *)0x000000B8) -#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)0x000000A4) -#define HAB_RVT_ENTRY (*(uint32_t *)0x00000098) -#define HAB_RVT_EXIT (*(uint32_t *)0x0000009C) +#ifdef CONFIG_MX6SX +#define HAB_RVT_BASE 0x00000100 +#else +#define HAB_RVT_BASE 0x00000094 +#endif + +#define HAB_RVT_ENTRY (*(uint32_t *)(HAB_RVT_BASE + 0x04)) +#define HAB_RVT_EXIT (*(uint32_t *)(HAB_RVT_BASE + 0x08)) +#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)(HAB_RVT_BASE + 0x10)) +#define HAB_RVT_REPORT_EVENT (*(uint32_t *)(HAB_RVT_BASE + 0x20)) +#define HAB_RVT_REPORT_STATUS (*(uint32_t *)(HAB_RVT_BASE + 0x24)) #define HAB_RVT_REPORT_EVENT_NEW (*(uint32_t *)0x000000B8) #define HAB_RVT_REPORT_STATUS_NEW (*(uint32_t *)0x000000BC) -- cgit v1.2.1 From 1dd42e313b1b7416d756d9fd9899b300fd238793 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 30 Sep 2014 12:41:17 +0200 Subject: ARM: mx6: gw_ventana: Remove superfluous memset of GD in board_init_f Zeroing GD in board_init_f() is not needed any more. As its now done in crt0.S. The patch that clears the GD in crt0.S is this one: aae2aef9 [arm: Set up global data before board_init_f()] from Simon. Signed-off-by: Stefan Roese Cc: Tim Harvey Cc: Stefano Babic Acked-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana_spl.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 9fc253bb82..ca35b3cb7e 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -402,13 +402,6 @@ void board_init_f(ulong dummy) struct ventana_board_info ventana_info; int board_model; - /* - * Zero out global data: - * - this shoudl be done by crt0.S - * - failure to zero it will cause i2c_setup to fail - */ - memset((void *)gd, 0, sizeof(struct global_data)); - /* setup AIPS and disable watchdog */ arch_cpu_init(); -- cgit v1.2.1 From 9f87640c03ea686bde5788ae14b13666620102f7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 24 Sep 2014 15:21:58 -0300 Subject: wandboard: Select CONFIG_CMD_FUSE Select CONFIG_CMD_FUSE so that the fuse API commands can be used. Signed-off-by: Fabio Estevam --- include/configs/wandboard.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 7d96908f0e..9fb501a341 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -110,6 +110,11 @@ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb" #elif defined(CONFIG_MX6Q) -- cgit v1.2.1 From fb6f86c4116252bbae2fb8773a614b8c790d25d4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 30 Sep 2014 14:05:39 -0300 Subject: mx6sxsabresd: Fix PCI reset and power GPIO assignments PERST_GPIO and POWER_GPIO are currently swapped. Fix the GPIO assignments as per the board schematics. Signed-off-by: Fabio Estevam --- include/configs/mx6sxsabresd.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index fd74c6980d..e02ea18a64 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -204,8 +204,8 @@ #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 1) -#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 0) +#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0) +#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) #endif /* FLASH and environment organization */ -- cgit v1.2.1 From ba743ac5c123d4a3491a995e20b930989d485795 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Wed, 1 Oct 2014 18:33:48 -0700 Subject: nitrogen6x: Update DDR timings for 2G memory arrangement Update DDR calibration settings based on a larger test set. The initial values were gathered on a small number of boards, and have been found to fail on some boards under load. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg index bb5716e88d..1096f777ec 100644 --- a/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg +++ b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg @@ -24,18 +24,18 @@ DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x43040319 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03040279 -DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43040321 -DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03030251 -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4d434248 -DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x42413c4d -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x34424543 -DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x49324933 -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001a0017 -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00170027 -DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x000a001f +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42740304 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x026e0265 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x02750306 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02720244 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x463d4041 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x42413c47 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x37414441 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4633473b +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0025001f +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x00290027 +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001f002b +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x000f0029 DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -- cgit v1.2.1 From 46f8a4b7e6cbf9cd86ad09f2a679fe1d78b79bb1 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 25 Sep 2014 21:14:16 +0200 Subject: arm: m28evk: Zap superfluous tab in env Remove this tab from env, since it's useless, just use spaces. Signed-off-by: Marek Vasut Cc: Stefano Babic --- include/configs/m28evk.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 322b45fd99..efe770b81b 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -282,9 +282,9 @@ "mmc rescan;" \ "if test -e mmc 0:2 ${bootscript} ; then " \ "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \ - "then;" \ - "\techo Running bootscript...;" \ - "\tsource ${kernel_addr_r};" \ + "then ; " \ + "echo Running bootscript... ; " \ + "source ${kernel_addr_r} ; " \ "fi ; " \ "fi\0" -- cgit v1.2.1 From 252499e603aa342368cb8a02c6d0641435e676c0 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 25 Sep 2014 21:14:17 +0200 Subject: arm: m53evk: Zap superfluous tab in env Remove this tab from env, since it's useless, just use spaces. Signed-off-by: Marek Vasut Cc: Stefano Babic --- include/configs/m53evk.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index ee4eb10e46..c133ba9d03 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -351,9 +351,9 @@ "mmc rescan;" \ "if test -e mmc 0:1 ${bootscript} ; then " \ "if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \ - "then;" \ - "\techo Running bootscript...;" \ - "\tsource ${kernel_addr_r};" \ + "then ; " \ + "echo Running bootscript... ; " \ + "source ${kernel_addr_r} ; " \ "fi ; " \ "fi\0" -- cgit v1.2.1 From 39d0973300b83c08f3f5047245ebf1de883b31f2 Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Thu, 2 Oct 2014 13:33:46 +0200 Subject: imx6: add Bachmann OT1200 board This patch adds support for the OT1200 series of devices. Following components are used in u-boot: + ethernet + i2c + emmc + gpio For more details see README. Changes v1 > v2 - make use of enable_cspi_clock(..) - fix usage of OUTPUT_40OHM define - added README Changes v2 > v3 - improve spelling in README - added own copy of mx6q_4x_mt41j128.cfg Signed-off-by: Christian Gmeiner --- arch/arm/Kconfig | 4 + board/bachmann/ot1200/Kconfig | 23 +++ board/bachmann/ot1200/MAINTAINERS | 6 + board/bachmann/ot1200/Makefile | 9 ++ board/bachmann/ot1200/README | 20 +++ board/bachmann/ot1200/mx6q_4x_mt41j128.cfg | 169 +++++++++++++++++++ board/bachmann/ot1200/ot1200.c | 251 +++++++++++++++++++++++++++++ configs/ot1200_defconfig | 3 + include/configs/ot1200.h | 197 ++++++++++++++++++++++ 9 files changed, 682 insertions(+) create mode 100644 board/bachmann/ot1200/Kconfig create mode 100644 board/bachmann/ot1200/MAINTAINERS create mode 100644 board/bachmann/ot1200/Makefile create mode 100644 board/bachmann/ot1200/README create mode 100644 board/bachmann/ot1200/mx6q_4x_mt41j128.cfg create mode 100644 board/bachmann/ot1200/ot1200.c create mode 100644 configs/ot1200_defconfig create mode 100644 include/configs/ot1200.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 106aed985f..8face21d56 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -414,6 +414,9 @@ config TARGET_HUMMINGBOARD config TARGET_TQMA6 bool "TQ Systems TQMa6 board" +config TARGET_OT1200 + bool "Bachmann OT1200" + config OMAP34XX bool "OMAP34XX SoC" @@ -577,6 +580,7 @@ source "board/atmel/at91sam9rlek/Kconfig" source "board/atmel/at91sam9x5ek/Kconfig" source "board/atmel/sama5d3_xplained/Kconfig" source "board/atmel/sama5d3xek/Kconfig" +source "board/bachmann/ot1200/Kconfig" source "board/balloon3/Kconfig" source "board/barco/titanium/Kconfig" source "board/bluegiga/apx4devkit/Kconfig" diff --git a/board/bachmann/ot1200/Kconfig b/board/bachmann/ot1200/Kconfig new file mode 100644 index 0000000000..55a825d8aa --- /dev/null +++ b/board/bachmann/ot1200/Kconfig @@ -0,0 +1,23 @@ +if TARGET_OT1200 + +config SYS_CPU + string + default "armv7" + +config SYS_BOARD + string + default "ot1200" + +config SYS_VENDOR + string + default "bachmann" + +config SYS_SOC + string + default "mx6" + +config SYS_CONFIG_NAME + string + default "ot1200" + +endif diff --git a/board/bachmann/ot1200/MAINTAINERS b/board/bachmann/ot1200/MAINTAINERS new file mode 100644 index 0000000000..ad75c24ee4 --- /dev/null +++ b/board/bachmann/ot1200/MAINTAINERS @@ -0,0 +1,6 @@ +BACHMANN ELECTRONIC OT1200 BOARD +M: Christian Gmeiner +S: Maintained +F: board/bachmann/ot1200 +F: include/configs/ot1200.h +F: configs/ot1200*_defconfig diff --git a/board/bachmann/ot1200/Makefile b/board/bachmann/ot1200/Makefile new file mode 100644 index 0000000000..1bd42e8321 --- /dev/null +++ b/board/bachmann/ot1200/Makefile @@ -0,0 +1,9 @@ +# +# Copyright (C) 2012-2013, Guennadi Liakhovetski +# (C) Copyright 2012-2013 Freescale Semiconductor, Inc. +# Copyright (C) 2013, Boundary Devices +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := ot1200.o diff --git a/board/bachmann/ot1200/README b/board/bachmann/ot1200/README new file mode 100644 index 0000000000..c03d44e458 --- /dev/null +++ b/board/bachmann/ot1200/README @@ -0,0 +1,20 @@ +U-Boot for the Bachmann electronic GmbH OT1200 devices + +There are two different versions of the base board, which differ +in the way ethernet is done. The variant detection is done during +runtime based on the address of the found phy. + +- "mr" variant +FEC is connected directly to an ethernet switch (KSZ8895). The ethernet +port is always up and auto-negotiation is not possible. + +- normal variant +FEC is connected to a normal phy and auto-negotiation is possible. + + +The variant name is part of the dtb file name loaded by u-boot. This +make is possible to boot the linux kernel and make use variant specific +devicetree (fixed-phy link). + +In order to support different display resoltuions/sizes the OT1200 devices +are making use of EDID data stored in an i2c EEPROM. diff --git a/board/bachmann/ot1200/mx6q_4x_mt41j128.cfg b/board/bachmann/ot1200/mx6q_4x_mt41j128.cfg new file mode 100644 index 0000000000..bb6c60b4c3 --- /dev/null +++ b/board/bachmann/ot1200/mx6q_4x_mt41j128.cfg @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020e05a8 0x00000030 +DATA 4 0x020e05b0 0x00000030 +DATA 4 0x020e0524 0x00000030 +DATA 4 0x020e051c 0x00000030 + +DATA 4 0x020e0518 0x00000030 +DATA 4 0x020e050c 0x00000030 +DATA 4 0x020e05b8 0x00000030 +DATA 4 0x020e05c0 0x00000030 + +DATA 4 0x020e05ac 0x00020030 +DATA 4 0x020e05b4 0x00020030 +DATA 4 0x020e0528 0x00020030 +DATA 4 0x020e0520 0x00020030 + +DATA 4 0x020e0514 0x00020030 +DATA 4 0x020e0510 0x00020030 +DATA 4 0x020e05bc 0x00020030 +DATA 4 0x020e05c4 0x00020030 + +DATA 4 0x020e056c 0x00020030 +DATA 4 0x020e0578 0x00020030 +DATA 4 0x020e0588 0x00020030 +DATA 4 0x020e0594 0x00020030 + +DATA 4 0x020e057c 0x00020030 +DATA 4 0x020e0590 0x00003000 +DATA 4 0x020e0598 0x00003000 +DATA 4 0x020e058c 0x00000000 + +DATA 4 0x020e059c 0x00003030 +DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e0784 0x00000030 +DATA 4 0x020e0788 0x00000030 + +DATA 4 0x020e0794 0x00000030 +DATA 4 0x020e079c 0x00000030 +DATA 4 0x020e07a0 0x00000030 +DATA 4 0x020e07a4 0x00000030 + +DATA 4 0x020e07a8 0x00000030 +DATA 4 0x020e0748 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e0750 0x00020000 + +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0774 0x00020000 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0798 0x000C0000 + +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 + +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 + +DATA 4 0x021b0018 0x00081740 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b000c 0x555A7974 +DATA 4 0x021b0010 0xDB538F64 +DATA 4 0x021b0014 0x01FF00DB +DATA 4 0x021b002c 0x000026D2 + +DATA 4 0x021b0030 0x005A1023 +DATA 4 0x021b0008 0x09444040 +DATA 4 0x021b0004 0x00025576 +DATA 4 0x021b0040 0x00000027 +DATA 4 0x021b0000 0x831A0000 + +DATA 4 0x021b001c 0x04088032 +DATA 4 0x021b001c 0x0408803A +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x0000803B +DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00428039 +DATA 4 0x021b001c 0x19308030 +DATA 4 0x021b001c 0x19308038 + +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b001c 0x04008048 +DATA 4 0x021b0800 0xA1380003 +DATA 4 0x021b4800 0xA1380003 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00022227 +DATA 4 0x021b4818 0x00022227 + +DATA 4 0x021b083c 0x434B0350 +DATA 4 0x021b0840 0x034C0359 +DATA 4 0x021b483c 0x434B0350 +DATA 4 0x021b4840 0x03650348 +DATA 4 0x021b0848 0x4436383B +DATA 4 0x021b4848 0x39393341 +DATA 4 0x021b0850 0x35373933 +DATA 4 0x021b4850 0x48254A36 + +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F + +DATA 4 0x021b480c 0x00440044 +DATA 4 0x021b4810 0x00440044 + +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 + +DATA 4 0x021b001c 0x00000000 +DATA 4 0x021b0404 0x00011006 + +/* set the default clock gate to save power */ +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +/* + * Setup CCM_CCOSR register as follows: + * + * cko1_en = 1 --> CKO1 enabled + * cko1_div = 111 --> divide by 8 + * cko1_sel = 1011 --> ahb_clk_root + * + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz + */ +DATA 4 0x020c4060 0x000000fb diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c new file mode 100644 index 0000000000..0d5ede5ca8 --- /dev/null +++ b/board/bachmann/ot1200/ot1200.c @@ -0,0 +1,251 @@ +/* + * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * Copyright (C) 2014, Bachmann electronic GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm) + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + OUTPUT_40OHM | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | OUTPUT_40OHM | \ + PAD_CTL_HYS) + +#define SPI_PAD_CTRL (PAD_CTL_HYS | OUTPUT_40OHM | \ + PAD_CTL_SRE_FAST) + +#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | OUTPUT_40OHM | \ + PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST) + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +static iomux_v3_cfg_t const enet_pads[] = { + MX6_PAD_KEY_ROW1__ENET_COL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL3__ENET_CRS | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_GPIO_18__ENET_RX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL2__ENET_RX_DATA2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL0__ENET_RX_DATA3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_ROW2__ENET_TX_DATA2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_ROW0__ENET_TX_DATA3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +static void setup_iomux_enet(void) +{ + imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); +} + +static iomux_v3_cfg_t const ecspi1_pads[] = { + MX6_PAD_DISP0_DAT3__ECSPI3_SS0 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT4__ECSPI3_SS1 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), +}; + +static void setup_iomux_spi(void) +{ + imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + setup_iomux_spi(); + + return 0; +} + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + return 1; +} + +struct fsl_esdhc_cfg usdhc_cfg[] = { + {USDHC3_BASE_ADDR}, +}; + +int board_mmc_init(bd_t *bis) +{ + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 8; + + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} + +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) + +/* I2C3 - IO expander */ +static struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC, + .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC, + .gp = IMX_GPIO_NR(3, 17) + }, + .sda = { + .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC, + .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC, + .gp = IMX_GPIO_NR(3, 18) + } +}; + +static iomux_v3_cfg_t const pwm_pad[] = { + MX6_PAD_SD1_CMD__PWM4_OUT | MUX_PAD_CTRL(OUTPUT_40OHM), +}; + +static void leds_on(void) +{ + /* turn on all possible leds connected via GPIO expander */ + i2c_set_bus_num(2); + pca953x_set_dir(CONFIG_SYS_I2C_PCA953X_ADDR, 0xffff, PCA953X_DIR_OUT); + pca953x_set_val(CONFIG_SYS_I2C_PCA953X_ADDR, 0xffff, 0x0); +} + +static void backlight_lcd_off(void) +{ + unsigned gpio = IMX_GPIO_NR(2, 0); + gpio_direction_output(gpio, 0); + + gpio = IMX_GPIO_NR(2, 3); + gpio_direction_output(gpio, 0); +} + +int board_eth_init(bd_t *bis) +{ + uint32_t base = IMX_FEC_BASE; + struct mii_dev *bus = NULL; + struct phy_device *phydev = NULL; + int ret; + + setup_iomux_enet(); + + bus = fec_get_miibus(base, -1); + if (!bus) + return 0; + + /* scan phy 0 and 5 */ + phydev = phy_find_by_mask(bus, 0x21, PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + free(bus); + return 0; + } + + /* depending on the phy address we can detect our board version */ + if (phydev->addr == 0) + setenv("boardver", ""); + else + setenv("boardver", "mr"); + + printf("using phy at %d\n", phydev->addr); + ret = fec_probe(bis, -1, base, bus, phydev); + if (ret) { + printf("FEC MXC: %s:failed\n", __func__); + free(phydev); + free(bus); + } + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + backlight_lcd_off(); + + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + + leds_on(); + + /* enable ecspi3 clocks */ + enable_cspi_clock(1, 2); + + return 0; +} + +int checkboard(void) +{ + puts("Board: "CONFIG_SYS_BOARD"\n"); + return 0; +} + +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + +int misc_init_r(void) +{ +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + return 0; +} diff --git a/configs/ot1200_defconfig b/configs/ot1200_defconfig new file mode 100644 index 0000000000..c516038697 --- /dev/null +++ b/configs/ot1200_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/bachmann/ot1200/mx6q_4x_mt41j128.cfg,MX6Q" +CONFIG_ARM=y +CONFIG_TARGET_OT1200=y diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h new file mode 100644 index 0000000000..071880fe75 --- /dev/null +++ b/include/configs/ot1200.h @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * Copyright (C) 2014 Bachmann electronic GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "mx6_common.h" +#define CONFIG_MX6 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#include +#include + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SYS_GENERIC_BOARD + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R +#define CONFIG_MXC_GPIO + +/* FUSE Configs */ +#define CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP + +/* UART Configs */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* SF Configs */ +#define CONFIG_CMD_SF +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SPI_FLASH_MACRONIX +#define CONFIG_SPI_FLASH_SST +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 2 +#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(1, 3)<<8)) +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) + +/* IO expander */ +#define CONFIG_PCA953X +#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 +#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* OCOTP Configs */ +#define CONFIG_CMD_IMXOTP +#define CONFIG_IMX_OTP +#define IMX_OTP_BASE OCOTP_BASE_ADDR +#define IMX_OTP_ADDR_MAX 0x7F +#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA +#define IMX_OTPWRITE_ENABLED + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER + +#ifdef CONFIG_MX6Q +#define CONFIG_CMD_SATA +#endif + +/* + * SATA Configs + */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE MII100 +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0x5 +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC + +/* Miscellaneous commands */ +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_SETEXPR + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 2 + +#define CONFIG_PREBOOT "" + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_CBSIZE 1024 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_CMDLINE_EDITING + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (64 * 1024) /* 64 kb */ +#define CONFIG_ENV_OFFSET (1024 * 1024) +/* M25P16 has an erase size of 64 KiB */ +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD + +/* FS Configs */ +#define CONFIG_CMD_EXT3 +#define CONFIG_CMD_EXT4 +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FS_GENERIC + +#define CONFIG_BOOTP_SERVERIP +#define CONFIG_BOOTP_BOOTFILE + +#endif /* __CONFIG_H */ -- cgit v1.2.1 From c9c86bde3d8d24a9eee06f64eaa2e14206c76d77 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:22 -0700 Subject: nitrogen6x: implement board_cfb_skip() to disable text output Several customers have asked to leave the display quiet during boot, so allow the user to express this request by the presence of environment variable "novideo". Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 60a09f4bb3..1a6edac02b 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -558,6 +558,11 @@ struct display_info_t const displays[] = {{ } } }; size_t display_count = ARRAY_SIZE(displays); +int board_cfb_skip(void) +{ + return NULL != getenv("novideo"); +} + static void setup_display(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; -- cgit v1.2.1 From 213e9e334822ba6a08d8d222d392dc30db8aa381 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Oct 2014 12:16:23 -0700 Subject: nitrogen6x: simplify board_mmc_getcd The same logic applies to both SD card slots, only with different GPIOs and the code should make that easier to see. Signed-off-by: Troy Kisky --- board/boundary/nitrogen6x/nitrogen6x.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 1a6edac02b..e8cc243774 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -279,17 +279,11 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = { int board_mmc_getcd(struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret; - - if (cfg->esdhc_base == USDHC3_BASE_ADDR) { - gpio_direction_input(IMX_GPIO_NR(7, 0)); - ret = !gpio_get_value(IMX_GPIO_NR(7, 0)); - } else { - gpio_direction_input(IMX_GPIO_NR(2, 6)); - ret = !gpio_get_value(IMX_GPIO_NR(2, 6)); - } + int gp_cd = (cfg->esdhc_base == USDHC3_BASE_ADDR) ? IMX_GPIO_NR(7, 0) : + IMX_GPIO_NR(2, 6); - return ret; + gpio_direction_input(gp_cd); + return !gpio_get_value(gp_cd); } int board_mmc_init(bd_t *bis) -- cgit v1.2.1 From 41612472b6de135598d0dcf24da783a9802badc8 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:24 -0700 Subject: nitrogen6x: configure SD2 pads for SDIO on USDHC2 Pads SD2_CLK/CMD/DAT0-3 are connected to an SDIO WiFi device on Nitrogen and unconnected on BD-SL-i.MX6 (sabre lite). Configure them as SDIO pins to prevent them from being in a state that confuses the WiFi part. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index e8cc243774..bde299f55d 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -124,6 +124,15 @@ struct i2c_pads_info i2c_pad_info2 = { } }; +static iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -657,6 +666,8 @@ int board_init(void) #ifdef CONFIG_MXC_SPI setup_spi(); #endif + imx_iomux_v3_setup_multiple_pads( + usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); -- cgit v1.2.1 From a3b527a947f6f71b2673bb7943854b4459f4142e Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:25 -0700 Subject: nitrogen6x: power-down miscellanous peripherals Ensure that cameras and USB OTG power are in a stable (reset) state at reset by configuring their pads and toggling GPIOs. Signed-off-by: Troy Kisky Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 47 +++++++++++++++++++++++++++++++--- 1 file changed, 43 insertions(+), 4 deletions(-) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index bde299f55d..38f0df8fdd 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -622,17 +622,56 @@ static void setup_display(void) } #endif +/* wl1271 pads on nitrogen6x */ +static iomux_v3_cfg_t const init_pads[] = { + /* WL12XX_WL_IRQ_GP */ + NEW_PAD_CTRL(MX6_PAD_NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN), + /* WL12XX_WL_ENABLE_GP */ + NEW_PAD_CTRL(MX6_PAD_NANDF_CS2__GPIO6_IO15, OUTPUT_40OHM), + /* WL12XX_BT_ENABLE_GP */ + NEW_PAD_CTRL(MX6_PAD_NANDF_CS3__GPIO6_IO16, OUTPUT_40OHM), + /* USB otg power */ + NEW_PAD_CTRL(MX6_PAD_EIM_D22__GPIO3_IO22, OUTPUT_40OHM), + NEW_PAD_CTRL(MX6_PAD_NANDF_D5__GPIO2_IO05, OUTPUT_40OHM), + NEW_PAD_CTRL(MX6_PAD_NANDF_WP_B__GPIO6_IO09, OUTPUT_40OHM), + NEW_PAD_CTRL(MX6_PAD_GPIO_8__GPIO1_IO08, OUTPUT_40OHM), + NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06, OUTPUT_40OHM), +}; + +#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14) + +static unsigned gpios_out_low[] = { + /* Disable wl1271 */ + IMX_GPIO_NR(6, 15), /* disable wireless */ + IMX_GPIO_NR(6, 16), /* disable bluetooth */ + IMX_GPIO_NR(3, 22), /* disable USB otg power */ + IMX_GPIO_NR(2, 5), /* ov5640 mipi camera reset */ + IMX_GPIO_NR(1, 8), /* ov5642 reset */ +}; + +static unsigned gpios_out_high[] = { + IMX_GPIO_NR(1, 6), /* ov5642 powerdown */ + IMX_GPIO_NR(6, 9), /* ov5640 mipi camera power down */ +}; + +static void set_gpios(unsigned *p, int cnt, int val) +{ + int i; + + for (i = 0; i < cnt; i++) + gpio_direction_output(*p++, val); +} + int board_early_init_f(void) { setup_iomux_uart(); - /* Disable wl1271 For Nitrogen6w */ + set_gpios(gpios_out_high, ARRAY_SIZE(gpios_out_high), 1); + set_gpios(gpios_out_low, ARRAY_SIZE(gpios_out_low), 0); gpio_direction_input(WL12XX_WL_IRQ_GP); - gpio_direction_output(WL12XX_WL_ENABLE_GP, 0); - gpio_direction_output(WL12XX_BT_ENABLE_GP, 0); - gpio_direction_output(GP_USB_OTG_PWR, 0); /* OTG power off */ imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads)); + imx_iomux_v3_setup_multiple_pads(init_pads, ARRAY_SIZE(init_pads)); setup_buttons(); #if defined(CONFIG_VIDEO_IPUV3) -- cgit v1.2.1 From 693cccf412b14b69cd6c81e10f150302ebfdd696 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Oct 2014 12:16:26 -0700 Subject: nitrogen6x: configure SGTL5000, CSI camera clock outputs Configure CLKO outputs for SGTL5000, CSI camera. The sys_mclk output for the SGTL500 in particular prevents Windows CE from properly driving audio. Signed-off-by: Troy Kisky Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 38f0df8fdd..96e2b7430c 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -622,8 +622,14 @@ static void setup_display(void) } #endif -/* wl1271 pads on nitrogen6x */ static iomux_v3_cfg_t const init_pads[] = { + /* SGTL5000 sys_mclk */ + NEW_PAD_CTRL(MX6_PAD_GPIO_0__CCM_CLKO1, OUTPUT_40OHM), + + /* J5 - Camera MCLK */ + NEW_PAD_CTRL(MX6_PAD_GPIO_3__CCM_CLKO2, OUTPUT_40OHM), + + /* wl1271 pads on nitrogen6x */ /* WL12XX_WL_IRQ_GP */ NEW_PAD_CTRL(MX6_PAD_NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN), /* WL12XX_WL_ENABLE_GP */ -- cgit v1.2.1 From 9fc425278b333f481d1bbf1efd98813dcd4d57d4 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:27 -0700 Subject: nitrogen6x: staticize board file Declare locally-used data structures and functions as static and pull in header files to prevent compiler warnings of "Should it be static?" when building with "make C=1". Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 96e2b7430c..e795492046 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include DECLARE_GLOBAL_DATA_PTR; #define GP_USB_OTG_PWR IMX_GPIO_NR(3, 22) @@ -70,12 +72,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t const uart1_pads[] = { +static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t const uart2_pads[] = { +static iomux_v3_cfg_t const uart2_pads[] = { MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), }; @@ -83,7 +85,7 @@ iomux_v3_cfg_t const uart2_pads[] = { #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1, SGTL5000 */ -struct i2c_pads_info i2c_pad_info0 = { +static struct i2c_pads_info i2c_pad_info0 = { .scl = { .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC, @@ -97,7 +99,7 @@ struct i2c_pads_info i2c_pad_info0 = { }; /* I2C2 Camera, MIPI */ -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC, @@ -111,7 +113,7 @@ struct i2c_pads_info i2c_pad_info1 = { }; /* I2C3, J15 - RGB connector */ -struct i2c_pads_info i2c_pad_info2 = { +static struct i2c_pads_info i2c_pad_info2 = { .scl = { .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC, .gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05 | PC, @@ -133,7 +135,7 @@ static iomux_v3_cfg_t const usdhc2_pads[] = { MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; -iomux_v3_cfg_t const usdhc3_pads[] = { +static iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -143,7 +145,7 @@ iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; -iomux_v3_cfg_t const usdhc4_pads[] = { +static iomux_v3_cfg_t const usdhc4_pads[] = { MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -153,7 +155,7 @@ iomux_v3_cfg_t const usdhc4_pads[] = { MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; -iomux_v3_cfg_t const enet_pads1[] = { +static iomux_v3_cfg_t const enet_pads1[] = { MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -180,7 +182,7 @@ iomux_v3_cfg_t const enet_pads1[] = { MX6_PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -iomux_v3_cfg_t const enet_pads2[] = { +static iomux_v3_cfg_t const enet_pads2[] = { MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -198,7 +200,7 @@ static iomux_v3_cfg_t const misc_pads[] = { }; /* wl1271 pads on nitrogen6x */ -iomux_v3_cfg_t const wl12xx_pads[] = { +static iomux_v3_cfg_t const wl12xx_pads[] = { (MX6_PAD_NANDF_CS1__GPIO6_IO14 & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(WEAK_PULLDOWN), (MX6_PAD_NANDF_CS2__GPIO6_IO15 & ~MUX_PAD_CTRL_MASK) @@ -246,7 +248,7 @@ static void setup_iomux_enet(void) imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); } -iomux_v3_cfg_t const usb_pads[] = { +static iomux_v3_cfg_t const usb_pads[] = { MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), }; @@ -280,7 +282,7 @@ int board_ehci_power(int port, int on) #endif #ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg usdhc_cfg[2] = { +static struct fsl_esdhc_cfg usdhc_cfg[2] = { {USDHC3_BASE_ADDR}, {USDHC4_BASE_ADDR}, }; @@ -331,7 +333,7 @@ int board_mmc_init(bd_t *bis) #endif #ifdef CONFIG_MXC_SPI -iomux_v3_cfg_t const ecspi1_pads[] = { +static iomux_v3_cfg_t const ecspi1_pads[] = { /* SS1 */ MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), @@ -339,7 +341,7 @@ iomux_v3_cfg_t const ecspi1_pads[] = { MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), }; -void setup_spi(void) +static void setup_spi(void) { imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); -- cgit v1.2.1 From adc4a2bd03ad6ab4cc7f73609d60ab740c8126e6 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Oct 2014 12:16:29 -0700 Subject: nitrogen6x: phy: add 100 us delay after phy reset Testing shows that the Micrel PHY may not be completely out of reset if accessed immediately. Signed-off-by: Troy Kisky Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index e795492046..a89a15ca74 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -246,6 +246,7 @@ static void setup_iomux_enet(void) gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */ imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); + udelay(100); /* Wait 100 us before using mii interface */ } static iomux_v3_cfg_t const usb_pads[] = { -- cgit v1.2.1 From 84caf0b26b513df0a0f45832d053a623963e5c6f Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:30 -0700 Subject: nitrogen6x: prevent warnings about board_ehci* callbacks Include declarations of board_ehci callbacks to prevent compiler warnings and enforce function prototypes. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index a89a15ca74..67d4154480 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -30,6 +30,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; #define GP_USB_OTG_PWR IMX_GPIO_NR(3, 22) -- cgit v1.2.1 From 4328fb05bf8c90e96afa023d39395efa5fb2fda5 Mon Sep 17 00:00:00 2001 From: Robert Winkler Date: Thu, 2 Oct 2014 12:16:31 -0700 Subject: nitrogen6x: display: add support lvds jeida screen Add support for Boundary Devices 7" and 10.1" 1280x800 displays with integrated FocalTech ft5x06 10-point touch controller. Because they share the touch controller with the 1024x600 displays, auto-detection is disabled and you must explicitly set the 'panel' environment variable: U-Boot > setenv panel LDB-WXGA U-Boot > saveenv && reset Signed-off-by: Robert Winkler Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 67d4154480..39e8013480 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -474,6 +474,17 @@ static void enable_lvds(struct display_info_t const *dev) gpio_direction_output(LVDS_BACKLIGHT_GP, 1); } +static void enable_lvds_jeida(struct display_info_t const *dev) +{ + struct iomuxc *iomux = (struct iomuxc *) + IOMUXC_BASE_ADDR; + u32 reg = readl(&iomux->gpr[2]); + reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT + |IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA; + writel(reg, &iomux->gpr[2]); + gpio_direction_output(LVDS_BACKLIGHT_GP, 1); +} + static void enable_rgb(struct display_info_t const *dev) { imx_iomux_v3_setup_multiple_pads( @@ -502,6 +513,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_lvds_jeida, + .mode = { + .name = "LDB-WXGA", + .refresh = 60, + .xres = 1280, + .yres = 800, + .pixclock = 14065, + .left_margin = 40, + .right_margin = 40, + .upper_margin = 3, + .lower_margin = 80, + .hsync_len = 10, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, .addr = 0x4, -- cgit v1.2.1 From 443d4d15d7bd2f2bd5a58a6a6dd8da2a8dd23de4 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:32 -0700 Subject: nitrogen6x: display: add qvga panel Add support for a 1/4 VGA panel with a 24-bit RGB interface. No auto-detection is enabled, so you must configure the 'panel' environment variable to use this display: U-Boot > setenv panel qvga U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 39e8013480..5e0461c54c 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -593,6 +593,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = 0, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_rgb, + .mode = { + .name = "qvga", + .refresh = 60, + .xres = 320, + .yres = 240, + .pixclock = 37037, + .left_margin = 38, + .right_margin = 37, + .upper_margin = 16, + .lower_margin = 15, + .hsync_len = 30, + .vsync_len = 3, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED } } }; size_t display_count = ARRAY_SIZE(displays); -- cgit v1.2.1 From 4adc1127f8c50c4361d0024e098a91e7050e7400 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:33 -0700 Subject: nitrogen6x: display: add support for LG-9.7 LVDS display Add support for LG 9.7" LVDS panel (1024x768) with integrated eGalax touch screen. Note that this panel differs only slightly from the Hannstar XGA panel (margins). No auto-detection is available because it shares the same touch controller as the Hannstar-XGA display, so you'll need to configure it through the 'panel' environment variable: U-Boot > setenv panel LG-9.7 U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 5e0461c54c..2200bc7c3b 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -553,6 +553,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = NULL, + .enable = enable_lvds, + .mode = { + .name = "LG-9.7", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, /* ~65MHz */ + .left_margin = 480, + .right_margin = 260, + .upper_margin = 16, + .lower_margin = 6, + .hsync_len = 250, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, .addr = 0x38, -- cgit v1.2.1 From d6949e3f9dc6f2bbc63b1614601291091d1f0347 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:34 -0700 Subject: nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays This patch adds support for LVDS WXGA displays that use the SPWG encoding standard instead of JEIDA. No auto-detection is enabled and you must explicitly set the 'panel' environment variable: U-Boot > setenv panel LDB-WXGA-S U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 2200bc7c3b..045f81ecb7 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -533,6 +533,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_lvds, + .mode = { + .name = "LDB-WXGA-S", + .refresh = 60, + .xres = 1280, + .yres = 800, + .pixclock = 14065, + .left_margin = 40, + .right_margin = 40, + .upper_margin = 3, + .lower_margin = 80, + .hsync_len = 10, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, .addr = 0x4, -- cgit v1.2.1 From 04edda266d333af5fe8cd5775f49071e8098082a Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:35 -0700 Subject: nitrogen6x: display: add support for fusion 7 display Add support for the Touch Revolution Fusion7 display: 800x480 RGB with a custom F0710A resistive touch controller. Auto-detection of this panel is supported so no configuration is required. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 045f81ecb7..be2a41f1a4 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -613,6 +613,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x10, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = detect_i2c, + .enable = enable_rgb, + .mode = { + .name = "fusion7", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 33898, + .left_margin = 96, + .right_margin = 24, + .upper_margin = 3, + .lower_margin = 10, + .hsync_len = 72, + .vsync_len = 7, + .sync = 0x40000002, + .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, .addr = 0x48, -- cgit v1.2.1 From 135663061ffa78c391dd502674bb50823555b675 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:36 -0700 Subject: nitrogen6x: display: add svga display (800x600) Add support for 800x600 18-bit RGB displays using VESA GTF timings. No auto-detection is supported, so you must configure this panel manually through the 'panel' environment variable: U-Boot > setenv panel svga U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index be2a41f1a4..ccbb9b7e29 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -633,6 +633,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 7, .sync = 0x40000002, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = NULL, + .enable = enable_rgb, + .mode = { + .name = "svga", + .refresh = 60, + .xres = 800, + .yres = 600, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, .addr = 0x48, -- cgit v1.2.1 From 865aa30bb30fb1675ea516bfab8850f91da69a29 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:37 -0700 Subject: nitrogen6x: display: add Ampire 1024x600 panel Add support for an Ampire 1024x600 LVDS panel with integrated Ilitek capacitive touch screen. Auto-detection is enabled, so no explicit configuration is needed. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index ccbb9b7e29..38d0b529de 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -653,6 +653,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = 0, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x41, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = detect_i2c, + .enable = enable_lvds, + .mode = { + .name = "amp1024x600", + .refresh = 60, + .xres = 1024, + .yres = 600, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, .addr = 0x48, -- cgit v1.2.1 From c745de7174e9f59f68ec281bf094259ada46d2a8 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:38 -0700 Subject: nitrogen6x: display: add wvga-lvds panel Add support for WVGA (800x480) panels using VESA GTF timings over LVDS. No auto-detection is supported, so you must configure this panel manually through the 'panel' environment variable: U-Boot > setenv panel svga U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 38d0b529de..a82ec45b0f 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -673,6 +673,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = 0, + .enable = enable_lvds, + .mode = { + .name = "wvga-lvds", + .refresh = 57, + .xres = 800, + .yres = 480, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, .addr = 0x48, -- cgit v1.2.1 From ce9507b793a0755b37b3612657a12f4d19ee0b61 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:39 -0700 Subject: nitrogen6x: display use I2C detect for HDMI The HPD pin and RX_SENSE registers have proven to be less reliable than using I2C on the EDID pins for detection of an HDMI monitor. In particular, when the HDMI output is reset through a "reboot" cycle, the detect_hdmi() routine often bounces, resulting in a failure to detect a connected monitor. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index a82ec45b0f..2762fcffae 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -494,10 +494,10 @@ static void enable_rgb(struct display_info_t const *dev) } struct display_info_t const displays[] = {{ - .bus = -1, - .addr = 0, + .bus = 1, + .addr = 0x50, .pixfmt = IPU_PIX_FMT_RGB24, - .detect = detect_hdmi, + .detect = detect_i2c, .enable = do_enable_hdmi, .mode = { .name = "HDMI", -- cgit v1.2.1 From 84e2dc0c89dc5c70ae17224141a745edcd36402c Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:40 -0700 Subject: nitrogen6x: config: add USB Mass Storage (ums) support Add support for the USB mass storage to enable access to on-board storage (especially eMMC and SATA). Details at: http://boundarydevices.com/u-boot-usb-mass-storage-gadget/ Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 2a1eb3b773..5e9b7437d9 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -368,4 +368,17 @@ #define CONFIG_PCIE_IMX #endif +#define CONFIG_CMD_ELF + +#define CONFIG_USB_GADGET +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +/* Netchip IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "Boundary" + #endif /* __CONFIG_H */ -- cgit v1.2.1 From 5b7103e0af5435d68489b2b579e9e46226782e64 Mon Sep 17 00:00:00 2001 From: Diego Rondini Date: Thu, 2 Oct 2014 12:16:41 -0700 Subject: nitrogen6x: config: allow boot to USB stick This patch enables boot to USB storage devices by expanding on the list of boot devices. Because the USB startup currently takes a long time, it places USB at the end of the list of supported devices. You can over-ride the boot order using the bootdevs environment variable. For instance, this will make USB the first (highest priority) device: U-Boot > setenv bootdevs usb mmc sata U-Boot > saveenv Signed-off-by: Diego Rondini Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 5e9b7437d9..21a25e0734 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -173,7 +173,13 @@ #define CONFIG_DRIVE_MMC #endif -#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC +#ifdef CONFIG_USB_STORAGE +#define CONFIG_DRIVE_USB "usb " +#else +#define CONFIG_DRIVE_USB +#endif + +#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB #if defined(CONFIG_SABRELITE) #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -253,12 +259,16 @@ "run netboot; " #else #define CONFIG_EXTRA_ENV_SETTINGS \ + "bootdevs=" CONFIG_DRIVE_TYPES "\0" \ "console=ttymxc1\0" \ "clearenv=if sf probe || sf probe || sf probe 1 ; then " \ "sf erase 0xc0000 0x2000 && " \ "echo restored environment to factory default ; fi\0" \ - "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \ + "bootcmd=for dtype in ${bootdevs}" \ "; do " \ + "if itest.s \"xusb\" == \"x${dtype}\" ; then " \ + "usb start ;" \ + "fi; " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ "for fs in fat ext2 ; do " \ "${fs}load " \ @@ -274,7 +284,7 @@ "echo ; echo serial console at 115200, 8N1 ; echo ; " \ "echo details at http://boundarydevices.com/6q_bootscript ; " \ "setenv stdout serial\0" \ - "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \ + "upgradeu=for dtype in ${bootdevs}" \ "; do " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ "for fs in fat ext2 ; do " \ -- cgit v1.2.1 From 43a3431c2602ba7949c3bbb7a541396caa772c2c Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Thu, 2 Oct 2014 12:16:42 -0700 Subject: nitrogen6x: config: use FS_GENERIC load command Remove the individual attempts to load using ext2 and fat, replace with the generic load command supporting available filesystem types. Signed-off-by: Kevin Mihelich --- include/configs/nitrogen6x.h | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 21a25e0734..2167d77a38 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -270,13 +270,11 @@ "usb start ;" \ "fi; " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ - "for fs in fat ext2 ; do " \ - "${fs}load " \ - "${dtype} ${disk}:1 " \ - "10008000 " \ - "/6x_bootscript" \ - "&& source 10008000 ; " \ - "done ; " \ + "load " \ + "${dtype} ${disk}:1 " \ + "10008000 " \ + "/6x_bootscript" \ + "&& source 10008000 ; " \ "done ; " \ "done; " \ "setenv stdout serial,vga ; " \ @@ -287,11 +285,9 @@ "upgradeu=for dtype in ${bootdevs}" \ "; do " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ - "for fs in fat ext2 ; do " \ - "${fs}load ${dtype} ${disk}:1 10008000 " \ - "/6x_upgrade " \ - "&& source 10008000 ; " \ - "done ; " \ + "load ${dtype} ${disk}:1 10008000 " \ + "/6x_upgrade " \ + "&& source 10008000 ; " \ "done ; " \ "done\0" \ -- cgit v1.2.1 From 8145ccc3be91f4909884cb80735e33ee930baa15 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:43 -0700 Subject: nitrogen6x: config: add initrd_high Support RAM disks by setting initrd_high. See commit 7e9603e Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 2167d77a38..3c24443592 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -282,6 +282,7 @@ "echo ; echo serial console at 115200, 8N1 ; echo ; " \ "echo details at http://boundarydevices.com/6q_bootscript ; " \ "setenv stdout serial\0" \ + "initrd_high=0xffffffff\0" \ "upgradeu=for dtype in ${bootdevs}" \ "; do " \ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ -- cgit v1.2.1 From 8d97b3ad95a2584aa31e281cfe2d6977f790803a Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:44 -0700 Subject: nitrogen6x: config: expose SATA, then MMC over USB If no boot script was found, expose internal storage over the USB mass storage gadget to allow easy programming. This is especially useful when SD cards are inaccessible or when loading SATA drives. More details are available in this blog post: http://boundarydevices.com/u-boot-usb-mass-storage-gadget/ Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 3c24443592..b31b92291d 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -180,6 +180,7 @@ #endif #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB +#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC #if defined(CONFIG_SABRELITE) #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -260,6 +261,7 @@ #else #define CONFIG_EXTRA_ENV_SETTINGS \ "bootdevs=" CONFIG_DRIVE_TYPES "\0" \ + "umsdevs=" CONFIG_UMSDEVS "\0" \ "console=ttymxc1\0" \ "clearenv=if sf probe || sf probe || sf probe 1 ; then " \ "sf erase 0xc0000 0x2000 && " \ @@ -281,7 +283,26 @@ "echo ; echo 6x_bootscript not found ; " \ "echo ; echo serial console at 115200, 8N1 ; echo ; " \ "echo details at http://boundarydevices.com/6q_bootscript ; " \ - "setenv stdout serial\0" \ + "setenv stdout serial;" \ + "setenv stdin serial,usbkbd;" \ + "for dtype in ${umsdevs} ; do " \ + "if itest.s sata == ${dtype}; then " \ + "initcmd='sata init' ;" \ + "else " \ + "initcmd='mmc rescan' ;" \ + "fi; " \ + "for disk in 0 1 ; do " \ + "if $initcmd && $dtype dev $disk ; then " \ + "setenv stdout serial,vga; " \ + "echo expose ${dtype} ${disk} " \ + "over USB; " \ + "ums 0 $dtype $disk ;" \ + "fi; " \ + " done; " \ + "done ;" \ + "setenv stdout serial,vga; " \ + "echo no block devices found;" \ + "\0" \ "initrd_high=0xffffffff\0" \ "upgradeu=for dtype in ${bootdevs}" \ "; do " \ -- cgit v1.2.1 From c36c0008285ebc5b3c56b4c0fcc654d2b55fef66 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:45 -0700 Subject: nitrogen6x: config: enable USB keyboard support Enable the use of USB keyboards on SABRE Lite and Nitrogen6x boards. Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index b31b92291d..d505191d20 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -122,6 +122,8 @@ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP /* Miscellaneous commands */ #define CONFIG_CMD_BMODE -- cgit v1.2.1 From d3d70e6f9b450ca37c005abe0a8ed5cd2869d71b Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:46 -0700 Subject: nitrogen6x: config: add CONFIG_CMD_MEMTEST Enable the 'mtest' command on Nitrogen6x and SABRE Lite boards. Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index d505191d20..82dc0fc975 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -382,6 +382,7 @@ #define CONFIG_CMD_BMP #define CONFIG_CMD_TIME +#define CONFIG_CMD_MEMTEST #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_CMD_BOOTZ -- cgit v1.2.1 From 5dbdc3cf3cd870ef799fd8e412f8b82915c98b65 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:47 -0700 Subject: nitrogen6x: config: enable "i2c edid" Enable the "i2c edid" command to query data from an attached HDMI monitor. Usage is typically this: U-Boot > i2c dev 1 U-Boot > i2c edid 0x50 ... Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 82dc0fc975..b911d06da7 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -63,6 +63,7 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_I2C_EDID /* MMC Configs */ #define CONFIG_FSL_ESDHC -- cgit v1.2.1 From 3f5d964ea082049c9616e4dc827cd4aa3972a281 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Oct 2014 12:16:48 -0700 Subject: nitrogen6x: config: allow more bootargs parameters Increase the maximum number of arguments allowed by the Hush parser. This prevents errors when users or scripts aren't quoting parameters when setting the "bootargs" variable et al. Signed-off-by: Troy Kisky Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index b911d06da7..50b6c5a19a 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -326,7 +326,7 @@ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_MAXARGS 48 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0x10000000 -- cgit v1.2.1 From 54950e8215c819e6a8e46752255b8347b00eb81f Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:49 -0700 Subject: nitrogen6x: config: disable logo Some users (QNX and Windows CE users in particular) have asked to disable the Penguin shown on the display at boot time. Signed-off-by: Eric Nelson Acked-by: Stefano Babic --- include/configs/nitrogen6x.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 50b6c5a19a..60c942f0d2 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -140,7 +140,6 @@ #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN #define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO #define CONFIG_IPUV3_CLK 260000000 #define CONFIG_CMD_HDMIDETECT #define CONFIG_CONSOLE_MUX -- cgit v1.2.1 From c0e7bd6661ee2c117d9543b674c968d711a9aed9 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:51 -0700 Subject: nitrogen6x: config: add gpio command Enable the 'gpio' command to allow reading and toggling of GPIO pins. Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 60c942f0d2..21013bc23a 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -32,6 +32,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO +#define CONFIG_CMD_GPIO #define CONFIG_CI_UDC #define CONFIG_USBD_HS #define CONFIG_USB_GADGET_DUALSPEED -- cgit v1.2.1 From e9feee63705c1d380e229a381f9a7d696044ff76 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:52 -0700 Subject: nitrogen6x: config: enable Android fastboot Enable 'fastboot' command. This is currently enabled but not yet functional. Including it in the configuration will ease further testing and development as discussed on the mailing list. Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 21013bc23a..17559d8f8c 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -413,4 +413,9 @@ #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 #define CONFIG_G_DNL_MANUFACTURER "Boundary" +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 + #endif /* __CONFIG_H */ -- cgit v1.2.1 From 5e3a388cddce1685ccd9bc1b58ddb89a191ed88f Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Thu, 2 Oct 2014 12:16:53 -0700 Subject: nitrogen6x: config: enable EXT4 filesystem Support reading/writing ext4 partitions. Signed-off-by: Kevin Mihelich Signed-off-by: Eric Nelson --- include/configs/nitrogen6x.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 17559d8f8c..469591fe88 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -77,6 +77,8 @@ #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION -- cgit v1.2.1