summaryrefslogtreecommitdiffstats
path: root/net/eth.c
Commit message (Collapse)AuthorAgeFilesLines
* net: Print error message upon net usage when no ethernet-interface is foundStefan Roese2008-03-051-1/+3
| | | | | | | | This patch fixes a problem seen on PPC4xx boards, when no MAC address is defined. Then no ethernet interface is available but a simple "tftp" command will return without any error message which is quite confusing. Signed-off-by: Stefan Roese <sr@denx.de>
* AT91CAP9 support : build integrationStelian Pop2008-02-141-0/+4
| | | | Signed-off-by: Stelian Pop <stelian@popies.net>
* Merge branch 'master' of git://www.denx.de/git/u-boot-avr32Wolfgang Denk2008-01-231-0/+4
|\
| * AVR32: ATNGW100 board supportHaavard Skinnemoen2008-01-181-0/+4
| | | | | | | | | | | | | | Add support for the ATNGW100 Network Gateway reference design, including flash, ethernet and MMC support. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-coldfireWolfgang Denk2008-01-231-0/+4
|\ \
| * | ColdFire: Add MCF547x_8x FEC driverTsiChungLiew2008-01-171-0/+4
| |/ | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Signed-off by: John Rigby <jrigby@freescale.com>
* | net: add 'ethrotate' environment variableMatthias Fuchs2008-01-171-0/+9
| | | | | | | | | | | | | | | | | | | | | | [PATCH] net: add 'ethrotate' environment variable This patch replaces the buildtime configuration option CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime configuration veriable. See README. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | QE UEC: Extend number of supported UECs to 4David Saada2008-01-151-0/+3
|/ | | | | | | | | This patch extends the number of supported UECs to 4. Note that the problem of QE thread resources exhaustion is resolved by setting the correct number of QE threads according to Ethernet type (GBE or FE). Signed-off-by: David Saada <david.saada@ecitele.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Fix Ethernet init() return codesBen Warren2008-01-101-1/+1
| | | | | | | | | | | | | | | | | | Change return values of init() functions in all Ethernet drivers to conform to the following: >=0: Success <0: Failure All drivers going forward should return 0 on success. Current drivers that return 1 on success were left as-is to minimize changes. Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-By: Timur Tabi <timur@freescale.com>
* Add support CONFIG_UEC_ETH3 in MPC83xxJoakim Tjernlund2008-01-081-0/+3
| | | | Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* NET: Proper return code handling in eth_init() function in file eth.cUpakul Barkakaty2008-01-031-4/+4
| | | | | | | | | | This patch modifies the return code handling in the eth_init() function, to be compatible with the handling of the return codes in the other network stack files. It now returns a 0 on Success and -1 on error. Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* net/eth.c: Fix env_enetaddr signed overflowShinya Kuribayashi2008-01-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are warned as below: U-Boot 1.2.0 (Aug 30 2007 - 08:27:37) DRAM: 256 MB Flash: 32 MB In: serial Out: serial Err: serial Net: NEC-Candy Warning: NEC-Candy MAC addresses don't match: Address in SROM is 00:00:4C:80:92:A2 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21 This patch changes env_enetaddr type from `char' to `unsigned char'. Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Introduce new eth_receive routineRafal Jaworowski2008-01-031-0/+58
| | | | | | | | | | | | | | The purpose of this routine is receiving a single network frame, outside of U-Boot's NetLoop(). Exporting it to standalone programs that run on top of U-Boot will let them utilise networking facilities. For sending a raw frame the already existing eth_send() can be used. The direct consumer of this routine is the newly introduced API layer for external applications (enabled with CONFIG_API). Signed-off-by: Rafal Jaworowski <raj@semihalf.com> Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Implement general ULi 526x Ethernet driver support in U-bootRoy Zang2007-11-061-0/+4
| | | | | | | | | | | | This patch implements general ULi 526x Ethernet driver. Until now, it is the only native Ethernet port on MPC8610HPCD board, but it could be used on other boards with ULi 526x Ethernet port as well. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Ben Warren <bwarren@qstreams.com>
* Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-151-4/+58
|\
| * Coding style cleanup; rebuild CHANGELOGWolfgang Denk2007-08-141-4/+4
| |
| * multicast tftp: RFC2090David Updegraff2007-08-131-0/+45
| | | | | | | | | | | | | | | | Implemented IETF RFC2090, Multicast TFTP. Initial implementation on Realtek RTL8139 and Freescale TSEC. Signed-off-by: David Updegraff <dave@cray.com> Signed-off-by: Ben Warren <bwarren@qstreams.com>
| * [ARM] TI DaVinci support, hopefully finalSergey Kubushyn2007-08-101-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the following DaVinci boards: - DV_EVM - SCHMOOGIE - SONATA Changes: - Split into separate board directories - Removed changes to MTD_DEBUG (or whatever it's called) - New CONFIG_CMD party line followed - Some cosmetic fixes, cleanup etc. - Patches against the latest U-Boot tree as of now. - Fixed CONFIG_CMD_NET in net files. - Fixed CONFIG_CMD_EEPROM for schmoogie. - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and DV_EVM. Can't check if it works on SONATA, don't have a board any more, but it at least compiles. Here is an excerpt from session log on SCHMOOGIE... U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial ARM Clock : 297MHz DDR Clock : 162MHz ETH PHY : DP83848 @ 0x01 U-Boot > iprobe Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F U-Boot > ping 192.168.253.10 host 192.168.253.10 is alive U-Boot > Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Acked-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> Acked-by: Stefan Roese <sr@denx.de>
| * Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk2007-08-061-4/+4
| |\
| | * Merge branch 'testing' into workingAndy Fleming2007-08-031-5/+4
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: CHANGELOG fs/fat/fat.c include/configs/MPC8560ADS.h include/configs/pcs440ep.h net/eth.c
| | | * net/: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-091-4/+4
| | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | | * net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-041-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | | [ADS5121] Support for the ADS5121 boardRafal Jaworowski2007-07-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following MPC5121e subsystems are supported: - low-level CPU init - NOR Boot Flash (common CFI driver) - DDR SDRAM - FEC - I2C - Watchdog Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Rafal Jaworowski <raj@semihalf.com> Signed-off-by: Jan Wrobel <wrr@semihalf.com>
* | | | Merge with /home/stefan/git/u-boot/u-boot-coldfire-freescaleStefan Roese2007-07-161-0/+4
|\ \ \ \ | |/ / / |/| | |
| * | | Merge branch 'master' into u-boot-5329-earlyJohn Rigby2007-07-101-31/+19
| |\ \ \ | | |/ /
| * | | Add mcffec_initialize()TsiChungLiew2007-07-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Added mcffec_initialize() in eth_initialize() Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * | | Added M5329AFEE and M5329BFEE PlatformsTsiChung Liew2007-06-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, include/configs/M5329EVB.h, lib_m68k/interrupts.c, and rtc/mcfrtc.c Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, lib_m68k/time.c, net/eth.c and rtc/Makefile Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | make show_boot_progress () weak.Heiko Schocher2007-07-131-11/+3
| |/ / |/| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* | | Merge with /home/hs/Atronic/u-bootWolfgang Denk2007-07-091-0/+11
|\ \ \ | |_|/ |/| |
| * | [PCS440EP] upgrade the PCS440EP board:Heiko Schocher2007-06-221-0/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | - Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de>
* | Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECxKim Phillips2007-05-171-31/+8
|/ | | | | | | For all practical u-boot purposes, TSECs don't differ throughout the mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge with /home/wd/git/u-boot/custodian/u-boot-74xx-7xxWolfgang Denk2007-04-181-0/+4
|\
| * Fix the confilcts when merging 'master' into hpc2.roy zang2006-12-011-5/+9
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The conflicts due to a new mpc7448 p3m7448 board is in the main tree. Merge branch 'master' into hpc2 Conflicts: MAKEALL cpu/74xx_7xx/cpu.c cpu/74xx_7xx/cpu_init.c cpu/74xx_7xx/speed.c
| * | Tundra tsi108 on chip Ethernet controller support.roy zang2006-11-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following is a brief description of the Ethernet controller: The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent Gigabit Ethernet ports,E0 and E1. It uses a single Management interface to manage the two physical connection devices (PHYs). Each Ethernet port has its own statistics monitor that tracks and reports key interface statistics. Each port supports a 256-entry hash table for address filtering. In addition, each port is bridged to the Switch Fabric through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO. Each Ethernet port also has a pair of internal Ethernet DMA channels to support the transmit and receive data flows. The Ethernet DMA channels use descriptors set up in memory, the memory map of the device, and access via the Switch Fabric. The Ethernet Controller?s DMA arbiter handles arbitration for the Switch Fabric. The Controller also has a register businterface for register accesses and status monitor control. The PMD (Physical Media Device) interface operates in MII, GMII, or TBI modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs. The GMII and TBI modes are used to connect with Gigabit PMDs. Internal data flows to and from the Ethernet Controller through the Switch Fabric. Each Ethernet port uses its transmit and receive DMA channels to manage data flows through buffer descriptors that are predefined by the system (the descriptors can exist anywhere in the system memory map). These descriptors are data structures that point to buffers filled with data ready to transmit over Ethernet, or they point to empty buffers ready to receive data from Ethernet. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
* | | Merge with /home/wd/git/u-boot/custodian/u-boot-avr32; code cleanup.Wolfgang Denk2007-04-181-0/+4
|\ \ \
| * | | AVR32: Enable networkingHaavard Skinnemoen2007-04-141-0/+4
| | |/ | |/| | | | | | | | | | | | | | | | Implement MACB initialization for AVR32 and ATSTK1000, and turn everything on, including the MACB driver. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* | | [Blackfin][PATCH] Add BF537 EMAC driver initializationAubrey Li2007-04-051-0/+4
|/ /
* | Merge with http://opensource.freescale.com/pub/scm/u-boot-83xx.gitWolfgang Denk2006-11-301-0/+7
|\ \
| * | mpc83xx: add QE ethernet supportDave Liu2006-11-031-0/+7
| |/ | | | | | | this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
* | [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boardsStefan Roese2006-11-291-5/+2
|/ | | | | | | | | This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are quite similar and share the same board directory "prodrive/p3mx" and the same config file "p3mx.h". Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of http://www.denx.de/git/u-bootJon Loeliger2006-06-071-0/+4
|\
| * * Update Intel IXP4xx supportWolfgang Denk2006-05-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | - Add IXP4xx NPE ethernet MAC support - Add support for Intel IXDPG425 board - Add support for Prodrive PDNB3 board - Add IRQ support Patch by Stefan Roese, 23 May 2006 [This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still sufferes from licensing issues. Blame Intel.]
* | Initial support for MPC8641 HPCN board.Jon Loeliger2006-04-261-0/+16
|/
* Merge with /home/sr/git/u-bootWolfgang Denk2005-12-011-3/+3
|\
| * Add support for TQM8541/8555 boards, TQM85xx support reworked:Stefan Roese2005-11-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Support for TQM8541/8555 boards added. - Complete rework of TQM8540/8560 support. - Common TQM85xx code now supports all current TQM85xx platforms (TQM8540/8541/8555/8560). - DDR SDRAM size detection added. - CAS latency default values can be overwritten by setting "serial#" to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used. If problems are detected with this non default CAS latency, the defualt values will be used instead. - FLASH size detection added. - Moved FCC ethernet driver initialization behind TSEC driver init -> TSEC is first device. Patch by Stefan Roese, 30 Nov 2005
* | Fix miiphy global data initialization (problem on 4xx boards when noMarian Balakowicz2005-11-301-0/+9
|/ | | | | | | ethaddr is assigned). Initialization moved from miiphy_register() to eth_initialize(). Based on initial patch for 4xx platform by Matthias Fuchs.
* Add support for multiple PHYs.Marian Balakowicz2005-10-281-0/+44
|
* Cleanup for GCC-4.xWolfgang Denk2005-10-131-1/+1
|
* Add support for AP1000 board.Wolfgang Denk2005-10-091-1/+1
| | | | Patch by James MacAulay, 07 Oct 2005
* Fix typo in eth.cWolfgang Denk2005-09-251-3/+3
| | | | Patch by Ara Avanesyan, 24 Feb 2005
OpenPOWER on IntegriCloud