summaryrefslogtreecommitdiffstats
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* tegra: Enable generic board for TegraSimon Glass2013-03-151-0/+2
| | | | | | Bravely enable CONFIG_SYS_GENERIC_BOARD for all Tegra boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove use of board_early_init_r/last_stage_init()Simon Glass2013-03-152-4/+4
| | | | | | | | | | | These boards define CONFIG_LAST_STAGE_INIT and CONFIG_BOARD_EARLY_INIT_R but these options are not available on ARM. Move them into the powerpc common file instead. This change affects: km_kirkwood_pci, mgcoge3un, kmnusa, kmcoge5un, km_kirkwood and portl2. Signed-off-by: Simon Glass <sjg@chromium.org>
* ppc: Remove PCIPPC2 and PCIPPC6 boardsStefan Roese2013-03-112-516/+0
| | | | | | | | | | These boards seem to be unmaintained for quite some time. So lets remove support for them completely. This also cleans up some common drivers/files. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Guillaume Alexandre <guillaume.alexandre@gespac.ch> Acked-by: Wolfgang Denk <wd@denx.de>
* mpc512x: add ifm ac14xx boardAnatolij Gustschin2013-03-091-0/+591
| | | | | | | | Add new mpc5121e based ac14xx board and a new pinmux config function for setting individual pinmux bit groups. This function is used in ac14xx board code. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* mpc512x: use common code for clock setting for all mpc512x boardsAnatolij Gustschin2013-03-094-2/+72
| | | | | | | | | Only define enabled clocks in the config file and enable the clocks in common code. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Wolfgang Denk <wd@denx.de>
* mpc512x: use common code for CSx configurationAnatolij Gustschin2013-03-094-0/+20
| | | | | | | | | | Remove CSx configurations from board code and only define required CSx macros in the board config file to configure chip select windows and parameters. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Wolfgang Denk <wd@denx.de>
* mpc5200: a4m2k: Implement custom "dynamic" watchdog supportStefan Roese2013-03-091-0/+5
| | | | | | | | | | This patch adds a custom U-Boot command "wdogtoggle" which enables the external hardware watchdog toggling via an GPIO pin on the a4m2k board. After issuing this commands, the watchdog will be serviced by U-Boot so that the user can use all U-Boot commands from the prompt. Signed-off-by: Stefan Roese <sr@denx.de>
* mpc5200: Add a4m2k board portStefan Roese2013-03-091-47/+66
| | | | | | | | | | | | | | | | | | | This patch adds the a4m2k MPC5200B board port. Its a derivate of the a3m071 board with only minor changes. Additionally this patch includes some clean-up changes: - Remove I2C support from a3m071 as its unused - Fix/enhance default env variables - Fix some comments - Add newly introduced CONFIG_SPL_TARGET to automatically build "u-boot-img.bin" - Fix dtb patching in READ desciption for SPL Linux booting: "fdt chosen" needs to get called to patch/create the chosen node. - Add missing call to spl_board_init(): Define CONFIG_SPL_BOARD_INIT so that spl_board_init() will get called in the SPL version. Signed-off-by: Stefan Roese <sr@denx.de>
* x86: Enable CONFIG_OF_CONTROL on corebootSimon Glass2013-03-041-0/+6
| | | | | | | Make use of a device tree on coreboot boards, and set the default to link. Signed-off-by: Simon Glass <sjg@chromium.org>
* ubifs: Allow ubifsmount volume reference by numberJoe Hershberger2013-03-049-11/+12
| | | | | | | | | | | | | | | | | | UBI can mount volumes by name or number The current code forces you to name the volume by prepending every name with "ubi:". >From fs/ubifs/super.c * There are several ways to specify UBI volumes when mounting UBIFS: * o ubiX_Y - UBI device number X, volume Y; * o ubiY - UBI device number 0, volume Y; * o ubiX:NAME - mount UBI device X, volume with name NAME; * o ubi:NAME - mount UBI device 0, volume with name NAME. Now any name passed in any of the above forms are allowed. Also update the configs that referenced ubifsmount. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* sandbox: config: Enable sandbox commandSimon Glass2013-03-041-0/+2
| | | | | | | | The 'sb' command allows loading files from the host, and listing directories. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
* sandbox: Enable ext4 and fat filesystemsSimon Glass2013-03-041-0/+7
| | | | | | | These are useful for build-testing code, at least. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
* Merge branch 'mem' of git://git.denx.de/u-boot-x86Tom Rini2013-03-041-2/+7
|\
| * sandbox: config: Enable hash functions and mtestSimon Glass2013-02-281-2/+7
| | | | | | | | | | | | | | | | Enable the hash command and sha1/256 hashing for sandbox. Also use a better address for memory testing (since the existing one is set up for linux host memory space). Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-blackfinTom Rini2013-03-042-3/+167
|\ \
| * | blackfin: bf60x: add hw watchdog supportBob Liu2013-03-041-0/+1
| | | | | | | | | | | | | | | | | | Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
| * | blackfin: bf60x: add board and headers files to support bf609Sonic Zhang2013-03-042-3/+166
| |/ | | | | | | | | | | | | | | Board and config header files for bf609-ezkit support. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* | OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local defineStefano Babic2013-03-012-2/+0
|/ | | | | | | | | CONFIG_SPL_OS_BOOT_KEY is used only in board files. It is not required to have a general CONFIG_ option. Rename it and define it in board directory. Signed-off-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@ti.com>
* powerpc/83xx/km: drop uneeded dtt_bus environment varHolger Brunck2013-02-151-1/+0
| | | | | | There is no need for a environment variable to configure the dtt bus. Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* powerpc/83xx/km: remove uneeded CONFIG_MISC_INIT_RHolger Brunck2013-02-152-4/+0
| | | | | | | Remove it from the processor specific headers. This is already defined in the common header km83xx.h. Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* powerpc/83xx/km: add support for kmopti2 boardHolger Brunck2013-02-151-6/+25
| | | | | | | This board is similar to TUXX1 but it has a different sized second FPGA. Therefore the configuration for the third chipselect is different. Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* powerpc/83xx/km: cleanup tuxx1 supportHolger Brunck2013-02-151-8/+9
| | | | | | | | | This is a preparation for the upcoming kmopti2 board. This board has also a second fpga on board which is different to the tuxx1 target. But we want to use the same header file. So remove the config option KM_DISABLE_APP2 and simply use the board names to distinguish the features. Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* km/common: add eccmode to kernel commandlineHolger Brunck2013-02-151-0/+3
| | | | | | | If CONFIG_NAND_ECC_BCH is chosen from in the board configuration we add an ecc mode to the kernel commandline. Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* powerpc/83xx: use NAND_ECC_BCH for kmcoge5neHolger Brunck2013-02-151-0/+2
| | | | | | Switch from 1-bit ecc to 4-bit ecc. Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* km/common: introduce $uimage variableAndreas Huber2013-02-151-1/+8
| | | | | | | | Replace the hardcoded string with a variable. If CONFIG_NAND_ECC_BCH is set we use a specific name for the uImage (ecc_bch_uImage). Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* powerpc/83xx: use ppc_6xx as arch variable for kmvect1Holger Brunck2013-02-151-1/+1
| | | | | | | On this board we are using hard floating point, so select the correct toolchain. Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* powerpc/83xx/km: add MV88E6122 switch support for kmvect1Karlheinz Jerg2013-02-152-6/+39
| | | | | | | | | | | | | | | kmvect1 has a UEC2 connection to the piggy board and a UEC0 connection to the switch MV88E6122. This switch has a connection to a frontport ethernet interface. The ethernet port used for network booting is automatically selected by u-boot. If a Piggy is plugged, the Piggy port is selected (UEC2, eth1). If the Piggy isn't present, the Frontport is selected (UEC0, eth0). The switch reset is connected to a GPIO on the PRIO3 board FPGA (GPIO28) and released at startup. Signed-off-by: Karlheinz Jerg <karlheinz.jerg@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* x86: Rename CONFIG_NO_X86_RESET_VECTOR to CONFIG_X86_RESET_VECTORSimon Glass2013-02-141-1/+0
| | | | | | | Invert the polarity of this option to simplify the Makefile logic. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Gabe Black <gabeblack@chromium.org>
* x86: Remove eNET boardsSimon Glass2013-02-141-619/+0
| | | | | | | These are no longer used and should be removed. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-02-1221-184/+1279
|\
| * Tegra114: Add/enable Dalmore build (T114 reference board)Tom Warren2013-02-112-0/+129
| | | | | | | | | | | | | | This build is stripped down. It boots to the command prompt. GPIO is the only peripheral supported. Others TBD. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra: cardhu: config: enable SPIAllen Martin2013-02-111-0/+11
| | | | | | | | | | | | | | | | Turn on SPI in cardhu config file Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * tegra: don't hard-code LCD into default TEGRA_DEVICE_SETTINGSStephen Warren2013-02-111-2/+9
| | | | | | | | | | | | | | | | | | Only add "lcd" into TEGRA_DEVICE_SETTINGS if CONFIG_VIDEO_TEGRA. Otherwise, "lcd" is meaningless. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * AM335X: Set fdt_high for AM335X devices to enable booting with Device Treehvaibhav@ti.com2013-02-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For AM335X boards, such as the EVM and Bone Linux kernel fails to locate the device tree blob on boot. The reason being is that u-boot is copying the DT blob to the upper part of RAM when booting the kernel and the kernel is unable to access the blob. By setting the fdt_high variable to 0xffffffff (to prevent the copy) the kernel is able to locate the DT blob and boot. This patch is tested on BeagleBone platform. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Tom Rini <trini@ti.com>
| * pcm051: Add support for Phytec phyCORE-AM335xLars Poeschel2013-02-071-0/+301
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board is named pcm051 and has this hardware: SOC: TI AM3359 DDR3-RAM: 2x MT41J256M8HX-15EIT:D 512MiB ETH 1: LAN8710AI SPI-Flash: W25Q64BVSSIG RTC: RV-4162-C7 I2C-EEPROM: CAT32WC32 NAND: MT29F4G08_VFPGA63 PMIC: TPS65910A3 LCD Supported: UART 1 MMC/SD ETH 1 USB I2C SPI Not yet supported: NAND RTC LCD Signed-off-by: Lars Poeschel <poeschel@lemonage.de> [trini: Add #define CONFIG_PHY_ADDR 0 to config] Signed-off-by: Tom Rini <trini@ti.com>
| * omap4: allow the use of a plain text env file instead boot scriptsJavier Martinez Canillas2013-02-071-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For production systems it is better to use script images since they are protected by checksums and carry valuable information like name and timestamp. Also, you can't validate the content passed to env import. But for development, it is easier to use the env import command and plain text files instead of script-images. Since both OMAP4 supported boards (Panda and TI SDP4430) are used primarily for development, this patch allows U-Boot to load env var from a text file in case that an boot.scr script-image is not present. The variable uenvcmd (if existent) will be executed (using run) after uEnv.txt was loaded. If uenvcmd doesn't exist the default boot sequence will be started. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Nishanth Menon <nm@ti.com>
| * OMAP3: igep00x0: add boot status GPIO LEDJavier Martinez Canillas2013-02-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds an GPIO LED boot status for IGEP boards. The GPIO LED used is the red LED0 while the Linux kernel uses the green LED0 as the boot status. By using different GPIO LEDs, the user can know in which step of the boot process the board currently is. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * OMAP3: use a single board file for IGEP devicesJavier Martinez Canillas2013-02-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even when the IGEPv2 board and the IGEP Computer-on-Module are different from a form factor point of view, they are very similar in the fact that share many components and how they are wired. So, it is possible (and better) to have a single board file for both devices and just use the CONFIG_MACH_TYPE to make a differentiation between each board when needed. This change avoids code duplication by removing 298 lines of code and makes future maintenance easier. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-02-027-5/+426
| |\
| | * mx23evk: Add initial board supportOtavio Salvador2013-01-281-0/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following features are supported: * 128 MB DDR1 SDRAM * DUART * SD/MMC Card Socket Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx23_olinuxino: Add default environmentOtavio Salvador2013-01-281-7/+70
| | | | | | | | | | | | | | | | | | This adds a default environment with support for MMC booting. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| | * mxs: mmc: mx23_olinuxino: Add MMC supportMarek Vasut2013-01-281-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the MMC attached to SSP1. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * net: fec_mxc: delete CONFIG_FEC_MXC_MULTITroy Kisky2013-01-283-3/+0
| | | | | | | | | | | | | | | | | | | | | It is more logical to test for CONFIG_FEC_MXC_PHYADDR to determine whether to define the function fecmxc_initialize. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * mx6qsabre_common: Let mmc partition be board specificFabio Estevam2013-01-282-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 49ea0ff5 (49ea0ff5) introduced CONFIG_SYS_MMC_ENV_PART into mx6qsabresd.h to store the mmc partition, but in order for it to have effect we should place it into 'mmcpart' variable. Also add CONFIG_SYS_MMC_ENV_PART into mx6qsabreauto.h. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx6qsabreauto: enable USB host interfaceKnut Wohlrab2013-01-281-0/+11
| | | | | | | | | | | | | | | | | | The USB host interface is routed to plug USB1/J30 on the mother board. Signed-off-by: Knut Wohlrab <knut.wohlrab@de.bosch.com>
| | * mxs: Add MX23 olinuxino board supportMarek Vasut2013-01-211-0/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for MX23-based Olinuxino board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: Linux uses ttyAMA0 as DUARTMarek Vasut2013-01-211-1/+1
| | | | | | | | | | | | | | | | | | | | | Replace use of ttyAM0 with ttyAMA0 as default serial console. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * | Tegra30: I2C: Enable I2C driver on CardhuTom Warren2013-01-162-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | Tested all 5 'buses', i2c probe enumerates device addresses on all but dev 4 (I2C4) [no devices on that bus on my Cardhu]. Note that this uses the extant tegra_i2c.c driver w/o modification. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | Tegra30: Add/enable Cardhu build (T30 reference board)Tom Warren2013-01-164-173/+301
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This build is stripped down. It boots to the command prompt. GPIO is the only peripheral supported. Others TBD. include/configs/tegra-common.h now holds common config options for Tegra SoCs. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * | tegra: remove custom TEGRA_DEVICE_SETTINGS for board filesMarc Dietrich2013-01-163-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TEGRA_DEVICE_SETTINGS lives now in tegra-common-post.h. This removes custom TEGRA_DEVICE_SETTINGS for all tegra boards providing video output, except seaboard, which was fixed by Stephen already. Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
OpenPOWER on IntegriCloud