summaryrefslogtreecommitdiffstats
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: ppc4xx: remove lwmon5 supportMasahiro Yamada2015-09-021-692/+0
| | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Remove CONFIG_LWMON5 references. (Also, remove undefined CONFIG_WD_MAX_RATE while I am here.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove csb272, csb472 supportMasahiro Yamada2015-09-022-563/+0
| | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tolunay Orkun <torkun@nextio.com>
* powerpc: ppc4xx: remove alpr supportMasahiro Yamada2015-09-021-351/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* ea20: Convert to generic boardStefano Babic2015-09-021-0/+2
| | | | | | | Boards need to select CONFIG_SYS_GENERIC_BOARD in order to prevent removal from the project. Signed-off-by: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-09-0218-12/+39
|\
| * powerpc: convert selected boards to generic board structureYork Sun2015-09-019-0/+27
| | | | | | | | | | | | | | | | Convert MPC8540ADS, MPC8541CDS, MPC8544CDS, MPC8548CDS, MPC8555CDS, MPC8560ADS, MPC8568MDS, MPC8569MDS, MPC8610HPCD to use generic board structure. Signed-off-by: York Sun <yorksun@freescale.com>
| * powerpc: configs: Fix init_ram physical address for several boardsYork Sun2015-09-019-12/+12
| | | | | | | | | | | | | | | | For e6500 and e5500 SoCs, it was intended to put init_ram address in ccsr reserved space. It is no longer true since SerDes module took the space. Move it to another reserved space at CCSR + 0x03c000. Signed-off-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-09-0213-11/+327
|\ \
| * | arm: mx6: cm-fx6: print PCB revisionNikita Kiryanov2015-09-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Print board revision for cm-fx6. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * | arm, imx6: add aristainetos 2b board versionHeiko Schocher2015-09-024-6/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | there is a 2b board version of the aristainetos2 board. Differences to the v2: - spi cs for the nor flash and display controller changed - some pinmux changes - LED gpio settings changed Signed-off-by: Heiko Schocher <hs@denx.de>
| * | video, lg4573: make spi bus and cs configurableHeiko Schocher2015-09-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | make the spi bus and the spi chipselect configurable for the lg4573 driver. Use it on the aristainetos boards. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
| * | imx: mx6slevk: add SPL supportPeng Fan2015-09-022-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPL boot support for mx6slevk board. 1. Introduce a configuration file mx6slevk_spl_defconfig. 2. i.MX6SL has same DRAM space with i.MX6SX, need to change SPL DRAM SPACE. 3. Include imx6_spl.h and related SPL macro in mx6slevk.h. 4. select SUPPORT_SPL for TARGET_MX6SLEVK. 5. Add SPL board code to do related initialization. Boot Log: U-Boot SPL 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59 +0000) CPU: Freescale i.MX6SL rev1.2 996 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 50C Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | arm, imx6: aristainetos board updatesHeiko Schocher2015-09-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | some small updates for the aristainetos boards: - fix display timings for the aristainetos board - fix pinmux for the aristainetos board - fix pinmux for the aristainetos2 board - fix default environment Signed-off-by: Heiko Schocher <hs@denx.de>
| * | imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORTPeng Fan2015-09-021-0/+1
| | | | | | | | | | | | | | | | | | | | | Enable CONFIG_SPL_FAT_SUPPORT to load u-boot.img from FAT partition. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * | imx: mx6ul_14x14_evk add ENET supportPeng Fan2015-09-021-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add enet support for mx6ul_14x14_evk board: 1. add pinmux settings 2. implement board_eth_init 3. implement board_phy_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | ARM: ts4800: add ethernet supportDamien Riegel2015-09-021-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds ethernet support to the TS4800. Note that the MAC address is not fused on this board and have to be read from FEC PALR PAUR registers (this is how the kernel provided by Technologic Systems does it). signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Stefano Babic <sbabic@denx.de>
| * | ARM: ts4800: add basic board supportLucile Quirion2015-09-021-0/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds basic support including: MMC, Serial console, TS4800 watchdog The config use CONFIG_SKIP_LOWLEVEL_INIT as U-boot is used as a second stage bootloader. Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com> signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Stefano Babic <sbabic@denx.de>
| * | cgtqmx6eval: Add Ethernet supportOtavio Salvador2015-09-021-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | cgtqmx6eval can be populated with a AR8035 or KSZ9031 depending on the board revision. Add Ethernet support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * | imx: mx6ul_14x14_evk discard redefined CONFIG_MX6Peng Fan2015-09-021-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Discard CONFIG_MX6 in mx6ul_14x14_evk.h, since it is already defined in mx6_common.h. Tested on mx6ul_14x14_evk board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * | arm: mx6: Remove SPI support from WRU-IV baseboardStefan Roese2015-09-021-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the SPI support from the WRU-IV baseboard as its not used at all. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Clemens Gruber <clemens.gruber@pqgruber.com> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Stefano Babic <sbabic@denx.de> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * | udoo: Remove SPL fat supportvpeter42015-09-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use dd'ed SPL and u-boot.img by default. Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | udoo: Switch to SPL supportvpeter42015-09-021-3/+16
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we need to build one U-boot image for each of the udoo variants: quad and dual-lite. By switching to SPL we can support all two variants with a single binary. Based on the SPL for wandboard. Tested with OpenELEC (Open Embedded Linux Entertainment Center) on both boards. Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* | arm/ls102xa:add hwconfig setting to support disable unused devicesZhuoyu Zhang2015-09-012-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | DEVDISRn registers provides a mechanism for gating clocks of IP blocks that are not used. Here we implement hwconfig option to allow users to disable unused peripherals on the board. For ex. If eSDHC/qDMA/eDMA are unused and with disabled status in dts, User can enable CONFIG_FSL_DEVICE_DISABLE and set "devdis:esdhc,qdma,edma" in hwconfig, thus ESDHC controller & eDMA/qDMA will be clock gated to save more power. Signed-off-by: Zhuoyu Zhang <Zhuoyu.Zhang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8: ls2085qds: Add support of X-QSGMII-16PORT riser cardPrabhakar Kushwaha2015-09-011-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The X-QSGMII-16PORT is a 4xQSGMII/8xSGMII riser card with eighth SerDes interfaces implemented in PCIe form factor board. It supports followings - Card can operate with up to 4 QSGMII lane simultaneously - Card can operate with up to 8 SGMII lane simultaneously Add support of X-QSGMII-16PORT riser card. This patch also take care of back-ward compatiblity with old SGMII rise cards used on LS2085QDS Platform. Signed-off-by: King Chung Lo@freescale.com <KingChungLo@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8: ls2085a: Add support of CONFIG_CMD_GREPENVPrabhakar Kushwaha2015-09-011-0/+1
| | | | | | | | | | | | | | Enable CONFIG_CMD_GREPENV to allow search in env variables Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8: ls2085a: Update bootargs as per default target consolePrabhakar Kushwaha2015-09-012-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | LS2085 targets supports following UART console LS2085AQDS UART0 LS2085ARDB UART1 LS2085ASim UART0 LS2085AEmu UART0 So update the bootargs as per the default console present at the target Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085a_simu: enable eSDHCYangbo Lu2015-09-011-0/+11
|/ | | | | Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-08-311-9/+3
|\
| * sunxi: increase SYS_MONITOR_LENBoris Brezillon2015-08-311-1/+1
| | | | | | | | | | | | Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * mtd: nand: Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through KconfigHans de Goede2015-08-311-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through Kconfig, just like SYS_NAND_BUSWIDTH_16BIT this is only enabled on some SoCs using depends, to avoid double defining it for SoCs which have not yet moved to Kconfig for this. Having this in Kconfig is useful because this is something which may differ from one board to the other even when using the same SoC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Scott Wood <scottwood@freescale.com>
| * sunxi_nand_spl: Rename SPL_NAND_SUNXI to NAND_SUNXIHans de Goede2015-08-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We eventually want to add full nand support, since it makes no sense to build SPL with nand support and u-boot without, or the other way around, a single option will suffice. Renaming the Kconfig option now makes things easier when we add full nand support in the future. The "obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o" is moved to an "ifdef CONFIG_SPL_BUILD" block in the Makefile. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi_nand_spl: Fix CONFIG_SPL_NAND_SUNXI handlingHans de Goede2015-08-311-6/+1
| | | | | | | | | | | | | | | | | | | | CONFIG_SPL_NAND_SUPPORT gets used via IS_ENABLED so it must be defined to 1, rather then just being defined. While at remove 2 other unused NAND related defines from sunxi-common.h. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | tpm: Convert board config TPM options to KconfigSimon Glass2015-08-314-16/+0
| | | | | | | | | | | | | | | | Convert all TPM options to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | tpm: Drop two unused optionsSimon Glass2015-08-311-2/+0
|/ | | | | | | | | | | The address of the I2C TPM is now defined in the device tree so there is no need for the CONFIG options. Remove them from the README and board config to avoid confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* ARM: uniphier: enable SPL_OF_CONTROLMasahiro Yamada2015-08-311-1/+1
| | | | | | | | | | | | | Device Tree really improves code maintainability and is now available for SPL too. This is the state-of-the-art implementation in U-boot. The board files (platform data) are no longer needed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARM: uniphier: remove unused macroMasahiro Yamada2015-08-301-2/+0
| | | | | | This macro is not referenced at all. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* include: configs: am43xx_evm: add 'usb stop' in usbboot envKishon Vijay Abraham I2015-08-281-0/+2
| | | | | | | | | | | | The usbboot environment variable has 'usb start' command but doesn't have the corresponding 'usb stop' command. This breaks usb peripheral mode if tried after 'run usbboot' fails to load the images in usb host mode. Fix it here by adding 'usb stop' command in usbboot env. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* picosam9g45: adopt CONFIG_SYS_PROMPTAndreas Bießmann2015-08-281-1/+0
| | | | | | | | Commit 181bd9dc61d2da88b78f1c1138a685dae39354d6 introduced Kconfig selection for SYS_PROMPT. When applying the new picosam9g45 board this change slipped through, adopt it. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* arm: spear: Some changes / updates to the x600 config headerStefan Roese2015-08-281-5/+16
| | | | | | | | | | | | | | | This patch brings the following changes to the x600 board support: - Add USB EHCI support - Add VFAT support for USB key file access - Increase malloc size (for UBI / UBIFS usage) - Enable Thumb mode to save some image space - Remove unreferenced CONFIG_STACKSIZE - Remove unreferenced CONFIG_SPL_NO_PRINTF Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vipin Kumar <vk.vipin@gmail.com>
* arm: spear: Move to common SPL infrastructureStefan Roese2015-08-281-5/+12
| | | | | | | | | | | | | The SPL implementation for SPEAr600 is older than the common SPL infrastructure. This patch now moves the SPEAr600 SPL over to the common SPL code. Tested on the only SPEAr board that currently uses SPL in mainline U-Boot, the x600. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vipin Kumar <vk.vipin@gmail.com>
* ARM: keystone2: configs: Move SP to end of u-boot sectionLokesh Vutla2015-08-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently u-boot stack is defined at the beginning of MSMC RAM. This is a problem for uart boot mode as ROM downloads directly to starting of MSMC RAM. Fixing it by moving stack to the end of u-boot section and shifting SYS_TEXT_BASE to the start of MSMC RAM. Updated division of MSMC RAM is shown below: ----------------------------------------- | | | | | U-Boot text |U-Boot | SPL text | | download | Stack | Download + | | | | SPL_BSS + | | | | SPL_STACK | ----------------------------------------- [1] [2] [3] [4] [1] SYS_TEXT_BASE (Start of MSMC RAM) [2] SPL_TEXT_BASE - GBL_DATA_SIZE [3] SPL_TEXT_BASE [4] END of SPL [1] + [2] is at least 1M on all platforms, so no chance of overlap. Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* NDS32: Generic Board Support and UnsupportKun-Hua Huang2015-08-282-718/+0
| | | | | | Remove ag101 and ag102 support Signed-off-by: Kun-Hua Huang <kunhua@andestech.com>
* NDS32: Generic Board Support and UnsupportKun-Hua Huang2015-08-281-14/+36
| | | | | | Add nds32 ag101p generic board support. Signed-off-by: Kun-Hua Huang <kunhua@andestech.com>
* rpi: set fdt_addr_r to 0x00000100 to match default device_tree_addressJonathan Liu2015-08-281-2/+2
| | | | | | | Raspberry Pi by default loads the FDT to 0x00000100 so set fdt_addr_r to match and move scriptaddr to 0x02000000 to avoid clobbering the FDT. Signed-off-by: Jonathan Liu <net147@gmail.com>
* Merge git://git.denx.de/u-boot-x86Tom Rini2015-08-265-7/+3
|\
| * x86: crownbay: Enable on-board SMSC superio keyboard controllerBin Meng2015-08-261-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far we only enabled one legacy serial port on the SMSC LPC47m superio chipset on Intel Crown Bay board. As the board also has dual PS/2 ports routed out, enable the keyboard controller which is i8042 compatible so that we can use PS/2 keyboard and mouse. In order to make PS/2 keyboard work with the VGA console, remove CONFIG_VGA_AS_SINGLE_DEVICE. To boot Linux kernel with PIC mode using PIRQ routing table, adjust the mask in the device tree to reserve irq12 which is used by PS/2 mouse. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * x86: Enable CONFIG_PCI_CONFIG_HOST_BRIDGE for all boardsBin Meng2015-08-265-4/+1
| | | | | | | | | | | | | | It looks that x86 chipset always contains a host bridge at pci b.d.f 0.0.0, so enable this for all boards. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Only include cbfs command for corebootBin Meng2015-08-261-0/+2
| | | | | | | | | | | | When running U-Boot bare-metal, the cbfs command is useless. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | Merge git://git.denx.de/u-boot-nand-flashTom Rini2015-08-261-0/+5
|\ \ | |/ |/|
| * arm: mvebu: Enable NAND on db-mv784mp-gpStefan Roese2015-08-251-0/+5
| | | | | | | | | | | | | | | | | | This patch enables NAND support on the Marvell Armada XP DB-MV784MP-GP eval board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Peter Morrow <peter@senient.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
OpenPOWER on IntegriCloud