summaryrefslogtreecommitdiffstats
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* adp-ag101: add board adp-ag101 supportMacpaul Lin2011-10-221-0/+406
| | | | | | | | Add evaluation board "adp-ag101" configuration file adp-ag101.h. Add adp-ag101.c board config and related settings. Add board adp-ag101 into boards.cfg Signed-off-by: Macpaul Lin <macpaul@andestech.com>
* km/common: enable "env default" for all keymile boardsGerlando Falauto2011-10-221-0/+1
| | | | | Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* km/common: fix ramfs development targetAndreas Huber2011-10-221-1/+1
| | | | | | | | | | Calucations of PRAM needs to take into account the 'rootfssize'. Memory available to the linux kernel 'mem=' is in all cases set to the total memory size minus the pram size. Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Wolfgang Denk <wd@denx.de>
* km_arm: enable POST for these boardsValentin Longchamp2011-10-221-0/+6
| | | | | | | | | | | | The current km_arm boards have a Power-On test jumper. When this jumper is set, this triggers some Power-On tests on the board. This patch enables the support of this jumper for starting the memory_regions test when the jumper is set. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Prafulla Wadaskar <prafulla@marvell.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2011-10-213-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mpc85xx: mpc85xx: Add inline GPIO acessor functions powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9) powerpc/85xx: Fix P2020DS booting powerpc/85xx: Update USB device tree status based on pin settings fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpers powerpc/85xx: Add support for RMan LIODN initialization powerpc/85xx: Update device tree handling for SRIO powerpc/85xx: Update setting of SRIO LIODNs fm: Don't allow disabling of FM1-DTSEC1 fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree
| * powerpc/85xx: Add support for RMan LIODN initializationKumar Gala2011-10-183-0/+3
| | | | | | | | | | | | | | | | | | This patch is intended to initialize RMan LIODN related registers on P2041, P304S and P5020 SocS. It also adds the "rman@0" child node to qman-portal nodes, adds "fsl,liodn" property to RMan inbound block nodes. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | ColdFire: Move boards with simple _config rules to boards.cfgstany MARCEL2011-10-191-4/+4
|/ | | | Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com>
* sandbox: Add basic config fileSimon Glass2011-10-171-0/+85
| | | | | | This basic provides required features along with a basic command set. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: ca9x4_ct_vxp: enable PXE BOOTP options supportJason Hobbs2011-10-171-0/+3
| | | | | Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Cc: Matt Waddel <matt.waddel@linaro.org>
* arm: ca9x4_ct_vxp: enable pxe command supportJason Hobbs2011-10-171-0/+4
| | | | | Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Cc: Matt Waddel <matt.waddel@linaro.org>
* Convert ca9x4_ct_vxp to standard env variablesJason Hobbs2011-10-171-6/+6
| | | | | Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Cc: Matt Waddel <matt.waddel@linaro.org>
* video: Moving mx3fb.c to CONFIG_VIDEOHelmut Raiger2011-10-172-16/+22
| | | | | | | | | | | | | | | | | | | | | | | | | mx3fb.c was based on CONFIG_LCD and is moved by this patch to CONFIG_VIDEO, which has greater freedom in selecting videomodes even at runtime. This renders the accumulating list of display defines (CONFIG_DISPLAY_VBEST..., CONFIG_DISPLAY_C057...) obsolete as these may be setup through env variables: uboot> setenv mydisplay 'video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925, le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0' uboot> setenv videomode ${mydisplay} This commit also fixes the board config files for qong and imx31_phycore boards as needed. The videomode settings of previously supported displays are added to CONFIG_EXTRA_ENV_SETTINGS now. CONFIG_SYS_MALLOC_LEN for imx31_phycore board is increased to make the frame buffer allocation working with the changed driver. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* VIDEO: MX5: Switch MX5 to CONFIG_VIDEOStefano Babic2011-10-171-6/+5
| | | | | | | | | | | | | | | | | The framebuffer driver for MX5 is based on CONFIG_LCD. In the current implementation, there is a serious bug because the required memory is allocated before relocation, but the driver knows only later which is the resolution of the display. The patch switches the driver to CONFIG_VIDEO and the memory is allocated by the driver itself. We also need to switch the vision2 board code and config file in the same commit so that this commit will be bisectable. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Anatolij Gustschin <agust@denx.de> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* powerpc: cpm2 boards: update fcc register logicMike Frysinger2011-10-1725-69/+69
| | | | | | | | | | | In the recent dropping of !NET_MULTI code (commit e2a53458a7ab37523304), I misread the logic in include/net.h. Some of it was used by NET_MULTI code as glue between the multi/non-multi worlds for cpm2 boards. Rather than restore the block of code, push the logic to the board config headers where it all belongs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* mpc5200: digsy_mtc: fix detection of Coral-PAAnatolij Gustschin2011-10-151-0/+1
| | | | | | | | | A delay of approximately 250 ms after PCI bus reset in pci_mpc5xxx_init() is needed to recognize the Coral-PA controller on the graphic extention board. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* powerpc/85xx: Drop CONFIG_VIDEO on P1_P2_RDB-PC boards to reduce sizeKumar Gala2011-10-131-16/+0
| | | | | | | | | With older compilers (gcc-4.2.x) we run into issues that resulting image is too large. We can save a bunch of space by removing the video support. In general video support on these boards is a nice to have since it requires a PCIe add-on card. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/mpc8548cds: Add 36-bit supportchenhui zhao2011-10-131-0/+56
| | | | | Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/mpc8548cds: Code cleanup and refactoringchenhui zhao2011-10-131-32/+37
| | | | | | | | | | | | - Rework tlb and law tables. - PCI2 is not available on MPC8548CDS, so remove it. - Move the memory map to the board config file. - Rewrite the board info according to the manual. - Remove unnecessary macros and redefine some macros to align with other boards. - Fix some typos. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsWolfgang Denk2011-10-121-0/+211
|\ | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mips: MIPS: Jz4740: Add qi_lb60 board support MIPS: Jz4740: Add NAND driver MIPS: Ingenic XBurst Jz4740 processor support
| * MIPS: Jz4740: Add qi_lb60 board supportXiangfu Liu2011-10-121-0/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device from Qi hardware: http://en.qi-hardware.com/wiki/Ben_NanoNote http://en.qi-hardware.com/wiki/Main_Page http://en.wikipedia.org/wiki/Qi_hardware This Jz4740-based clamshell device does not use NOR flash to boot. The initial bring-up assumes that U-Boot is directly loaded into SDRAM using USB boot tool, and starts from 0x80100000. About USB boot tool ------------------- Jz4740 is one of the XBurst processors with USB boot functionality supported. The CPU can boot from a small ROM in the LSI, initialize CPU and USB module, then wait for USB commands from the USB host. We can send 8 KB binary data to the CPU cache using USB boot tool. USB boot tool is available to the public at Ingenic website. Also there is an alternative Debian package named xburst-tools. Signed-off-by: Xiangfu Liu <xiangfu@openmobilefree.net> Acked-by: Daniel <zpxu@ingenic.cn> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2011-10-122-9/+13
|\ \ | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-ppc4xx: ppc4xx: Change DDR2 CL from 4 to 5 for intip ppc4xx: Improve lm63 pwm on dlvision-10g ppc4xx: Do not stop booting on any keypress on intip
| * | ppc4xx: Change DDR2 CL from 4 to 5 for intipDirk Eibach2011-10-121-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | Some intip boards don't seem to run stable with CL4, datasheets suggest that CL5 is the safe value. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Improve lm63 pwm on dlvision-10gDirk Eibach2011-10-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Fan PWM lookuptable was modified to start at 46 degrees celsius instead of 40 degrees celsius. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Do not stop booting on any keypress on intipDirk Eibach2011-10-121-2/+6
| |/ | | | | | | | | | | | | | | Use CONFIG_AUTOBOOT_KEYED on intip so that booting can only be stopped with well defined keypresses. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | powerpc/mpc8536ds: Save the env variables to SDcard and SPI flashXie Xiaobo2011-10-091-4/+18
| | | | | | | | | | | | | | | | | | | | | | MPC8536DS offer booting from SDcard or SPI flash. This patch defined that u-boot can save the environment variables on SDcard or SPI flash when booting from the related device. The Env parameter region and linux kernel region have overlap in SPI-Flash, So change the Env param saving address. Signed-off-by: Xie Xiaobo <r63061@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8536ds: Add USB support for MPC8536DSFanzc2011-10-091-0/+15
| | | | | | | | | | | | | | Add EHCI controller and USB command definition. Signed-off-by: Xie Xiaobo <r63061@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8536ds: Add eSPI support for MPC8536DSXie Xiaobo2011-10-091-0/+14
| | | | | | | | | | | | | | | | | | | | 1. The SD_DATA[4:7] signals are shared with the SPI chip selects on 8536DS, so don't set MPC85xx_PMUXCR_SD_DATA that config eSDHC data bus-width to 4-bit and enable SPI signals. 2. Add eSPI controller and SPI-FLASH definition. Signed-off-by: Xie Xiaobo <r63061@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8548cds: Update config filechenhui zhao2011-10-091-18/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | - Increase the size of malloc space. - Enable e1000 network card. - Show pci devices on startup. - Change the location of env address. - Use hwconfig to turn off ECC by default. [Kumar Gala] Fixed white space formating for CONFIG_EXTRA_ENV_SETTINGS Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc86xx: Disable translation for BAT setupBecky Bruce2011-10-091-50/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We really shouldn't be overwriting bat registers with translation enabled, especially when we're executing code using one of them for translating the current instruction stream. Instead, disable address translation while doing the final BAT setup. In order to do this, setup_bats has to move back to asm code, because we require translation to be enabled to have a stack for C code. The yucky thing about that is that the assembler doesn't like ULL so we have to switch to using HIGH/LOW pairs for physical addresses that are > 32 bits in length. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Acked-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8641hpcn: fix SRIO BAT configBecky Bruce2011-10-091-5/+0
| | | | | | | | | | | | | | | | There were duplicate (and conflicting) defines for the BATs used to cover SRIO. Drop the bogus set. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: CONFIG_ENABLE_36BIT_PHYS does not depend on CONFIG_PHYS_64BITTimur Tabi2011-10-092-3/+3
| | | | | | | | | | | | | | | | | | | | The macro CONFIG_ENABLE_36BIT_PHYS is used to indicate that the given SOC is capable of 36-bit physical addresses, even if such large addresses are not used. On two boards, this macro was enabled only when building a 36-bit image. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/8xxx: Add support for interactive DDR programming interfaceYork Sun2011-10-091-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interactive DDR debugging provides a user interface to view and modify SPD, DIMM parameters, board options and DDR controller registers before DDR is initialized. With this feature, developers can fine-tune DDR for board bringup and other debugging without frequently having to reprogram the flash. To enable this feature, define CONFIG_FSL_DDR_INTERACTIVE in board header file and set an environment variable to activate it. Syntax: setenv ddr_interactive on After reset, U-boot prompts before initializing DDR controllers FSL DDR> The available commands are print print SPD and intermediate computed data reset reboot machine recompute reload SPD and options to default and recompute regs edit modify spd, parameter, or option compute recompute registers from current next_step to end next_step shows current next_step help this message go program the memory controller and continue with u-boot The first command should be "compute", which reads data from DIMM SPDs and board options, performs the calculation then stops before setting DDR controller. A user can use "print" and "edit" commands to view and modify anything. "Go" picks up from current step with any modification and compltes the calculation then enables the DDR controller to continue u-boot. "Recompute" does it over from fresh reading. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* board configs: drop NET_MULTI referencesMike Frysinger2011-10-05340-483/+10
| | | | | | | Now that none of the core checks CONFIG_NET_MULTI, there's not much point in boards defining it. So scrub all references to it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* net: drop !NET_MULTI bcm570x/tigon3 driversMike Frysinger2011-10-051-3/+2
| | | | | | | | | | | These drivers have never been converted to NET_MULTI, and they are only used by one board (BMW). So drop the drivers until someone feels like rewriting them for NET_MULTI support. Rather than punting the BMW board completely, just disable net support in its board config. Seems to build fine without it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* km_arm: enable POST for these boardsValentin Longchamp2011-10-051-0/+6
| | | | | | | | | | | | The current km_arm boards have a Power-On test jumper. When this jumper is set, this triggers some Power-On tests on the board. This patch enables the support of this jumper for starting the memory_regions test when the jumper is set. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Prafulla Wadaskar <prafulla@marvell.com>
* km_arm: change CONFIG_SYS_TEXT_BASE to end of RAMValentin Longchamp2011-10-051-1/+1
| | | | | | | | | This allows to test a larger part of the RAM in the memory tests. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Heiko Schocher <hs@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2011-10-0433-290/+1867
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mpc85xx: powerpc/p3060: Add SoC related support for P3060 platform powerpc/85xx: Add support for setting up RAID engine liodns on P5020 powerpc/85xx: Refactor some defines out of corenet_ds.h fm-eth: Add ability for board code to disable a port powerpc/mpc8548: Add workaround for erratum NMG_LBC103 powerpc/mpc8548: Add workaround for erratum NMG_DDR120 powerpc/mpc85xxcds: Fix PCI speed powerpc/mpc8548cds: Fix booting message powerpc/p4080: Add support for secure boot flow powerpc/85xx: Add Secure Boot support on P1010RDB for NOR, NAND & SPIFLASH powerpc/85xx: Add PBL & SECUREBOOT support on P3041/P5020DS boards powerpc/p2041rdb: remove watch dog related codes powerpc/p2041rdb: updated description of cpld command powerpc/p2041rdb: add more ddr frequencies support powerpc/p2041rdb: set sysclk according to status of physical switch SW1 powerpc/p2041rdb: update cpld reset command according to CPLD 2.0 powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver powerpc/mpc83xx: Migrate from spd_sdram to unified DDR driver powerpc/mpc8xxx: Add DDR2 to unified DDR driver powerpc/mpc8xxx: Fix picos_to_mclk() and get_memory_clk_period_ps() powerpc/mpc8xxx: Add SPD EEPROM address for single controller 2 slots powerpc/mpc8xxx: Fix DDR code for empty first DIMM slot and enable DQS_en powerpc/85xx: Refactor P2041RDB to use common p_corenet files powerpc/85xx: refactor common P-Series CoreNet files for FSL boards powerpc/85xx: Enable CMD_REGINFO on corenet boards powerpc/85xx: p2041rdb - Remove unused 'execute' perm in TLB entries powerpc/85xx: Fix USB protocol definitions for P1020RDB powerpc/corenet_ds: Use separated speed tables for UDIMM and RDIMM powerpc/mpc8xxx: Move DDR RCW overriding to common code powerpc/mpc8xxx: Extend CWL table powerpc/85xx: Cleanup how SVR_MAJ() is defined on MPC8536 powerpc/85xx: Cleanup extern in corenet_ds board code powerpc/p2041rdb: Add ethernet support on P2041RDB board powerpc/85xx: Add networking support to P1023RDS powerpc/hydra: Add ethernet support on P5020/P3041 DS boards powerpc/85xx: Add FMan ethernet support to P4080DS powerpc/85xx: Add support for FMan ethernet in Independent mode powerpc/mpc8548cds: Cleanup mpc8548cds.c powerpc/mp: add support for discontiguous cores powerpc/85xx: corenet_ds - Remove unused 'execute' perm in TLB entries fdt: Add new fdt_create_phandle helper fdt: Rename fdt_create_phandle to fdt_set_phandle powerpc/85xx: Fix compile warnings/errors if CONFIG_SYS_DPAA_FMAN isn't set fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010) powerpc/P1010: Add workaround for erratum P1010-A003549 (related to IFC) fsl_ifc: Add the workaround for erratum IFC-A002769 (enable on P1010) powerpc/85xx: Expanding the window of CCSRBAR in AS=1 from 4k to 1M powerpc/85xx: Add NAND/NAND_SPL support to P1010RDB nand: Freescale Integrated Flash Controller NAND support powerpc/85xx: Add basic support for P1010RDB powerpc/85xx: Add support for new P102x/P2020 RDB style boards powerpc/85xx: relocate CCSR before creating the initial RAM area powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0 powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014
| * powerpc/85xx: Add support for setting up RAID engine liodns on P5020Kumar Gala2011-10-031-0/+1
| | | | | | | | | | | | | | | | | | Add support for Job Queue/Ring LIODN for the RAID Engine on P5020. Each Job Queue/Ring combo needs one id assigned for a total of 4 (2 JQs/2 Rings per JQ). This just handles RAID Engine in non-DPAA mode. Signed-off-by: Santosh Shukla <santosh.shukla@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Refactor some defines out of corenet_ds.hKumar Gala2011-10-034-8/+16
| | | | | | | | | | | | | | | | | | | | | | Move some SoC/board specific defines out of corenet_ds.h and into the corresponding P3041DS/P4080DS/P5020.h. We moved CONFIG_MMC, CONFIG_PCIE3, & CONFIG_FSL_NGPIXIS because the P3060 SoC/reference board does not have these devices and it will share the same board code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/p4080: Add support for secure boot flowRuchika Gupta2011-10-031-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pre u-boot Flow: 1. User loads the u-boot image in flash 2. PBL/Configuration word is used to create LAW for Flash at 0xc0000000 (Please note that ISBC expects all these addresses, images to be validated, entry point etc within 0 - 3.5G range) 3. ISBC validates the u-boot image, and passes control to u-boot at 0xcffffffc. Changes in u-boot: 1. Temporarily map CONFIG_SYS_MONITOR_BASE to the 1M CONFIG_SYS_PBI_FLASH_WINDOW in AS=1. (The CONFIG_SYS_PBI_FLASH_WINDOW is the address map for the flash created by PBL/configuration word within 0 - 3.5G memory range. The u-boot image at this address has been validated by ISBC code) 2. Remove TLB entries for 0 - 3.5G created by ISBC code 3. Remove the LAW entry for the CONFIG_SYS_PBI_FLASH_WINDOW created by PBL/configuration word after switch to AS = 1 Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Kuldip Giroh <kuldip.giroh@freescale.com> Acked-by: Wood Scott-B07421 <B07421@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Add Secure Boot support on P1010RDB for NOR, NAND & SPIFLASHRuchika Gupta2011-10-031-2/+13
| | | | | | | | | | Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Kuldip Giroh <kuldip.giroh@freescale.com>
| * powerpc/p2041rdb: set sysclk according to status of physical switch SW1Shaohui Xie2011-10-031-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | P2041RDB supports 3 sysclk frequencies, it's selected by SW1[6~8], software need to read the SW1 status to decide what the sysclk needs. SW1[8~6] : frequency 0 0 1 : 83.3MHz 0 1 0 : 100MHz others: 66.667MHz Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driverYork Sun2011-09-291-0/+16
| | | | | | | | | | | | | | | | | | | | Update MPC8349EMDS to use unified DDR driver instead of spd_sdram.c. The unified driver can initialize data using DDR controller. No need to use DMA if just to initialze for ECC. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Enable CMD_REGINFO on corenet boardsKumar Gala2011-09-291-0/+1
| | | | | | | | | | | | | | Useful for various debug to know how various regsters might be set in a human readable form. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Fix USB protocol definitions for P1020RDBRamneek Mehresh2011-09-291-1/+4
| | | | | | | | | | | | | | | | | | USB protocol macros (CONFIG_USB_EHCI ...) to be included only when CONFIG_HAS_FSL_DR_USB is defined for a board. Presence of USB DR controller should be declared along with the underlying protocol used in the controller Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/p2041rdb: Add ethernet support on P2041RDB boardMingkai Hu2011-09-291-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for RGMII, SGMII and XAUI Ethernet on P2041RDB board. The five dTSEC can be routed to two on-board RGMII phy, three on-board SGMII phy or four SGMII phy on SGMII riser card according to different serdes protocol configuration and board lane configuration. Also updated the device tree to direct the Fmac MAC to the correct PHY. Removed CONFIG_SYS_FMAN_FW as its not used anywhere. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Add networking support to P1023RDSRoy Zang2011-09-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The P1023 has two 1G ethernet controllers the first can run in SGMII, RGMII, or RMII. The second can only do SGMII & RGMII. We need to setup a for SoC & board registers based on our various configuration for ethernet to function properly on the board. Removed CONFIG_SYS_FMAN_FW as its not used anywhere. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Lei Xu <B33228@freescale.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Add FMan ethernet support to P4080DSAndy Fleming2011-09-291-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for RGMII, SGMII, and XAUI (10Gb) Ethernet on P4080DS. The board supports add-on cards for SGMII and XAUI functionality. Which slots on the board these cards are in is a function of the SERDES option selected and muxes on the board. Additionally because of the high-configurablity which MDIO bus one is connected to is "selected" via an FPGA register. We create dummy MDIO bus for the phy layer and hide the mux manipulation in this dummy layer. Add fman fdt helper function in board common code it'll be used by several freescale boards that do various muxing of the MDIO signals based on which controller/interface one is trying to talk to. Removed CONFIG_SYS_FMAN_FW as its not used anywhere. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Add NAND/NAND_SPL support to P1010RDBDipen Dudhat2011-09-291-0/+59
| | | | | | | | | | | | | | | | | | And various defines to enable NAND support and NAND spl code for the P1010RDB platform. Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Add basic support for P1010RDBPoonam Aggrwal2011-09-291-0/+706
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Boot methods supported: NOR Flash, SPI Flash and SDCARD This patch adds the following basic interfaces: DDR3, eTSEC, DUART, I2C, SD/MMC, USB, SATA, PCIe, NOR Flash, SPI Flash. P1010RDB Overview ----------------- 1Gbyte DDR3 (on board DDR) Local Bus (IFC): 32Mbyte 16bit NOR flash 32Mbyte SLC NAND Flash 64KB CPLD device(GPCM interface) SPI Flash: 128 Mbit SPI Flash memory SD/MMC: connector to interface with the SD memory card SATA: 1 internal SATA connect to 2.5. 160G SATA2 HDD 1 eSATA connector to rear panel USB 2.0: x1 USB 2.0 port: connected via a UTMI PHY to Mini-AB interface. x1 USB 2.0 port: directly connected to Mini-AB interface Ethernet eTSEC: eTSEC1: Connected to RGMII PHY VSC8641XKO eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY VSC8221 eCAN: Two DB-9 female connectors for Field bus interface UART: supports two UARTs up to 115200 bps for console TDM: 2 FXS ports connected via an external SLIC to the TDM interface. SLIC: SPI SLIC I2C: Serial EEprom Real time clock 256 Kbit M24256 I2C EEPROM PCIe: PCIe and mPCIe connectors. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
OpenPOWER on IntegriCloud